Burning CD-R Verification Error

Hi,
I'm trying to burn a simple 5 track EP to a cd-r which includes ISRC data in Adobe Audition CC.
To do this I've added the audio tracks (.Wavs) to a new CD Layout where I've included the relevent meta-data. I then update the CD Text details in the Properties panel and insert my blank disc so it's ready to burn.
The issue I'm having is that although Audition recognises my blank disc, allows me to start the burn process and seemingly even burns the audio to the disc, the disc verification fails every time it is about to start.
My disc is left with visible data on it (when ejected and to the naked eye) but the computer still sees it as blank. I'm not able to erase the disk within apples 'Disk utilities' service either.
I've gone through 10 disks, trying each combination from changing speed settings, write modes and selecting/deselecting the verify CD and Eject CD checkboxes.
The only combination that has partly worked is if I deselect both Verify and Eject disc. The disc burns fully, it 'Completes Disc' at the end of the process and show the tracks in iTunes, only with incorrect CD and Track data.... I don't know who 'Tanisha Ward' is but it certainly isn't my CD data.
This however is irrelevant as when I eject the disc and then insert it again to test that it reads it appears blank again.
My macs internal burner works fine with iTunes and other apps I have. The reason I am using Audition is due to it's ability to add ISRC data.
Am I missing some important element to this process? Should I be doing something else?
My Computer Details are as follows:
iMac 27inch
2.7 GHz Core i5
4 GB 1333 MHz DDR3
Mac OS X Lion 10.7.5 (11G63)
SuperDrive - HL-DT-ST DVDRW GA32N KE06
If someone can help me that would be great.

Thanks Dave,
I'll take a look at whether my drive supports writing the codes and check to see if there is an update too.
In regards to missing tags, do you mean adding track, artist and album titles to the disc? I did this manually in Audition assuming it would render the data directly to the disc.
Or do you mean that the ISRC would pull the CD data in usually but as it's not been copied to the disc it is essentially missing therefore I'm getting random track suggestions?
If this fails I'll be making a trip to the store today.
Would you recommend Plextor for my system?
Apologies for dumbness. I'm new, clearly :/
Thanks so much for your help

Similar Messages

Verification error even after drive replaced 3 times

i often burn a DVD and get a verification error. i never had this problem before. i am on my third optical drive (matsushita uj-868).
i even reformatted and tried leopard and snow leopard. no luck the error is inconsistent across many types of media.
any ideas on how i can get this resolved?

Got to the apple store and ask to see a manager. 3 times might be enough to have it replaced - but then it will have the same drive if it's another machine?
Is it failing to burn 4.3gb discs or dual layer?
I'm having trouble with dual layer data discs but CDs and DVDs (4.3gb) are fine.

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

I have Windows 7. When I try to print an album cover on a CD I burned, I get an error message that there is a problem and it shuts down iTunes and says will notify me once the problem is fixed

I have iTunes version 11.3.1.2 and a Windows 7 Professional aith Service Pack 1. When I try to print a CD cover from a disc I burned, I get an error message that stops the printing task and shuts down iTunes and tells me once the problem is found they will notify me. When this happened before I got sent a message from Apple that I needed to install a new verion of iTunes. I believe I now have the latest iTunes version. So why can't I print?
Is this the problem below? Does the graphics driver cause the problem?
Solve a problem with NVIDIA Graphics Driver
NVIDIA Graphics Driver has stopped working properly.
A driver update, if available, might prevent this problem from recurring.

Try a different media. I have good luck using Maxell discs.

The disc can't be burned because an unexpected error occurred (error code 0x80020000).

Hello - I am receiving this error code on all my Apple computers (iMac and MacBook) which have the most current Mac OS X 10.6.7. I'm a photographer and burn CDs frequently and out of the blue began having issues two days ago:
The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
What is the remedy? Is it related to a recent update or will there be an update to fix? Since it's not simply one computer, gathering it's not the burn drive but software related...
FYI - Yes I've tried other brands of disk, etc. however, this is a part of my daily work-flow and have had no issues till a couple days ago.
Thank you all and any for your time in assisting!!

Same here. I bought a macbook pro in march. Now I got this error. And I'm from Brazil... Not speak english very well, but tried to explain what happens with my new macbook (that can't burn DVD)...
Please, could you help me?
thanks

Itunes wont burn my CD disc error 4280?

I have a toshiba satellite computer running windows 7 and itunes 11. It wont let me burn my playlist to a disk. Im using memorex CD-R blank cd. I have tried every disc write speed and nothing worked and ran diagnostics everything checks out. Can someone help me?

I tried the same thing on an HP Touchsmart, using Windows 7. I highlight songs in my iTunes music library and create a new playlist. I right-click on the playlist and start the burning process. I am prompted to put a blank disc in the drive, which I do. Then I have two more prompts, which ask me about the format of the content I wish to create. Once that's done, the burning starts.
It seems that for every playlist I burn, I ruin one disc. It seems that either at the beginning or at the end of the burning process that an error occurs and burning is cancelled. This is very frustrating.
Any ideas would be appreciated.

Email verification error

Ever since the latest update, I'm receiving this error when trying to setup an additional email account:
"Verification error Failed to verify email accounts from this device. All accounts will be deleted."
The options are "Yes" or "No"
Obviously, I'm not going to say "yes" to delete all accounts. Any fix for this problem???

Thanks for your reply.
The phone is used for business so the problem had to be resolved quickly. I called Verizon Support and was told to back up contacts and do a master reset and then reset all email accounts.
Best regards,
Carolyn
Logo
Brackett Imports, Inc.
T. 508-428-8887 · F. 508-428-8855
[email protected]

Error Code: "The disc can't be burned because an unexpected error occurred (error code 0x8002006E).

I cannot burn items to a disc and get the following error code; "The disc can’t be burned because an unexpected error occurred (error code 0x8002006E)."
I appreciate any help in trying to figure this out.

"I also use the application "Clean My Mac" at least ounce a month to rid it of all unwanted or unneeded files, which also is supposed to keep my Mac running at optimum speed, just as a by-the-way."
There is your problem right there!!!
CleanMyMac is complete and total paid ""garbageware"!!!!
You may have irreparably damaged/corrupted and/or deleted important/needed system and OS X operational files using CleanMyMac.
You can try and use this uninstaller to completely uninstall CleanMyMac, but the damage to your system may have already happened and has been done
since you readily admit to using this garbageware regularly on your Mac.
Here is the proper way to uninstall both CleanMyMac and CleanMyMac2.
http://macpaw.com/support/cleanmymac-classic/knowledgebase/how-to-uninstall-clea nmymac-classic
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Make sure which version of CleanMyMac you are using and pick the correct uninstaller.
Do you run any other so-called hard drive "maintenance" or "cleaning" apps or any type of commercial antivirus softwares?
If you do, you need to search the web to find out how to correctly and properly uninstall these types of apps.
You now may need to get yourself another external hard drive, purchase and use a data cloning app, such as CarbonCopyCloner or SuperDuper to create a exact bootable clone of your Mac's internal hard drive to a new external hard drive.
Then erase and reformat your boot drive and do a complete, clean reinstall of you OS X system, system and security updates as well as a complete reinstall of all of your applications and updates.
Let this be a very important lesson to you!
Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary OR needed. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
These types of system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and important data is too great a risk!
Here is a proper and manual methodology to "cleaning" data off of your Mac.
Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you are an iMovie user, iMovie has its own individual Trash location that needs to be emptied, too!
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
http://www.omnigroup.com/more
Download an app called OnyX for your version of OS X.
http://www.titanium.free.fr/downloadonyx.php
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Moving iTunes library
http://support.apple.com/kb/HT1449
Moving iPhoto library
http://support.apple.com/kb/PH2506
Moving iMovie projects folder
http://support.apple.com/kb/ph2289
Good Luck!

I try to burn a CD and error code 4450 comes up. Why?

When I try to burn a CD thr error code 4450 comes up. Itried burning a CD with only one song and the same thing happened and this was a song that I never burned before.

Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 2400
iTunes 10.2.2.12
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012A8B0127865D8
Current user is an administrator.
The current local date and time is 2011-05-04 17:13:30.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d0ee8348cfa5127a2c597b1cbb4c6f65
iPodService 10.2.2.12 is currently running.
iTunesHelper 10.2.2.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), Cdr4_xp (8.0.0.212),
UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.2.0.1),
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 12X.

Signing a document, generates a "Timestamp signature property generation error: Verification error."

I am getting this error message when I sign my documents. Especially when I try and create a second or third signature on a document.
I have just upgraded to Reader11.0.09 and then when I got the error, I went back to Reader 11.0.08 and then back to Reader 11.0.07 but all are giving the error. The document gets signed but a pop up box shows the "Timestamp signature property generation error: verification error"
I have the settings pointing to our timestamp server under Preferences > Document Timestamping > Server Settings.
Under signature verification preferences > Verification > Verification time, I have the "Secure time (timestamp) embedded in the signature" selected.
It seems to work but is generating the error. If I open a new document and sign it sometimes it works without the error. Occasionally it produces the error on first signing. Mostly on second and third signatures on the page..
Any ideas?

you can mail me directly to [email protected], and I'll try to help.
no guarenty :-)
Tal
[email protected]

When burning my pictures to CD, a burn failed, medium write error came up.

When burning my pictures from IPhoto to a CD, a burn failed, medium write error showed up,

Like many other suggestions I found, I went ahead and purchased a lens cleaner. The CD instructions said to insert and play track 2, but my drive would just keep ejecting the CD. But it worked! That and a little compressed air.
Before using the lens cleaner and compressed air, my drive would constantly give me a medium write error and always make loud vibrating noises that sounded like my drive was about to explode. But now it writes like a charm and is completely silent!

Verification error when run the game after download the jad/jar by OTA on BB 8300

On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.

Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

CS6 Installation Failure - Adobe Genuine Software Verification Error

I am trying to install CS6 as a trial version on my Windows8 laptop but keep being told that my software is counterfeit (" Installation Failure - Adobe Genuine Software Verification Error").
I have uninstalled and re-downloaded it with no success, and the only forum post i can see on this suggests checking the date/time on the PC are correct (which they are).
Any further ideas?
Many thanks

Thanks very much for replying Mylenium - i found this before but it only contains a link to photoshopCC rather than CS6 unless I have missed it??. I have bought a licence for the student/teacher edition of CS6 (which I am still waiting for) so presume that downloading photoshop CC wont work.
I have also tried the 'troubleshoot' link provided but couldnt find anything specific to this error.
Has anyone successfully resolved this problem for CS6?
Cheers

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Hi, William
My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
hope for your answer

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can't be burned because an unexpected error occurred (error code 0x80020000)

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.

Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh

Burning CD-R Verification Error

Similar Messages

Maybe you are looking for