Burning CD's is stopped after 3/4 done???

I bought three new albums last week and every time I try to burn one of them it get 3/4 the way through and stops. It shows error 4480, and quits. ANY ANSWERS ????
THANKS !! HOOVY

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Similar Messages

Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously

Hi
Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously
This happens with an entire series of chapters but does not happen with another series of chapters on thre same DVD.
I am missing something to solve this issue.
Can anyone help?

Hi Jeff,
I just checked:
There is no override on the montage

When I burn podcast to CD it stops after 12-13 minutes of 50 minute show

I have been doing this for years to listen in the car on long trips with no problem. Lately, the recording stops after 12-13 minutes and I have no idea why or how to fix it. Help!

I am using photoshop Elements 10 under the create tab...slide show.
Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago. Had not used it other than for photo editing until today.
I can also not login in thru the program. It simply spins and I finally had to force close the program
Toni V. Sloan
Sent from my iPad
On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
created by Chris Cox in Photoshop General Discussion - View the full discussion
Photoshop doesn't do slideshows… What software are you using?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Audio stops after about 5 minutes

After rendering/encoding, the sound on my finished DVD stops after approximately 5 minutes. It is fine on iMovie, and also is there in iDVD when using preview.
In contrast to other posts in this forum, there are no slide shows on my DVD, and all sound comes from the camcorder together with the video.
I am using "Create Disc Image", and I have tried both playing back with DVD player from that very disc image, and actually burning it on a DVD and playing it back from there.
I have also thrown out the whole iDVD project and started from scratch by creating a new project from iMovie.
Since my DVD is just about 60 min, I have also tried both "quality" and "performance" encoding - same result.
The audio stops in the middle of a 4-min clip as defined in iMovie.
I am using iDVD 5.0.1.
This process (importing from camcorder, editing in iMovie, building menus etc. in iDVD, creating disc image, burning) is something I have done for several DVDs previously without problems (but maybe with iDVD 5.0)

Thanks for your help! You helped solve the issue, albeit indirectly...
At this point, I want to share my experience, in the hope that it might be helpful to others:
After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

Slideshow stops after ca. 20 slides

I'm new to CS4 Master Collection and using Encore for slideshows. I created a slideshow in six segments and the DVD builds okay with audio, menu and some after effects intro. However, when I play the slideshow back, I get about 19 or 20 slides to advance before the show stops. If I fast forward the DVD player and then immediately hit play, the show begins again after missing typically one slide then progresses smoothly for approximately 20 more slides before stopping again. The slides are all 720x480 jpegs. The same problem occurs in each of the segments. Any help or suggestions would be greatly appreciated!

Yes, the disk image plays correctly using the Apple DVD-player.
I am familiar with the fact that the slower you burn, the better. Therefore I burned the image to one DVD with Apple's DVD-burner at the slowest possible speed of 1x, and another copy using Toast Titanium's best possible writing method.
The oddest thing is that both DVD-disks stop after 7 minutes on the Yamaha-set, but play at a DVD-player integrated in a 'cheap' small tv! There is however a hesitation in the slideshow: it stops for a couple of seconds, but it continues after that! So the no-name DVD-player plays along where the Yamaha-player comes up with a blank screen!
Besides that, the no-name DVD-payer had its trouble with the transitions between pictures, I took them all out.
It seems to me that the vob-files are not 'connected' right, it must have something to do with the burning.
My Mac's DVD player: MATSHITA DVD-R UJ-85J, Revision: FCQ5, Protocol: ATAPI, Sockettype: Intern, Low power polling: Yes

Slideshow stops after 139 photos.

When trying to play a slideshow using a photo album that has 350 photos it freezes on slide 139 every time regardless of duration of each photo, music or no music.
Just upgraded to ios 8.2. Not sure if related to upgrade, but have previously been able to make longer slideshows with hundreds of photos. Any suggestions on how to solve?

Yes, the disk image plays correctly using the Apple DVD-player.
I am familiar with the fact that the slower you burn, the better. Therefore I burned the image to one DVD with Apple's DVD-burner at the slowest possible speed of 1x, and another copy using Toast Titanium's best possible writing method.
The oddest thing is that both DVD-disks stop after 7 minutes on the Yamaha-set, but play at a DVD-player integrated in a 'cheap' small tv! There is however a hesitation in the slideshow: it stops for a couple of seconds, but it continues after that! So the no-name DVD-player plays along where the Yamaha-player comes up with a blank screen!
Besides that, the no-name DVD-payer had its trouble with the transitions between pictures, I took them all out.
It seems to me that the vob-files are not 'connected' right, it must have something to do with the burning.
My Mac's DVD player: MATSHITA DVD-R UJ-85J, Revision: FCQ5, Protocol: ATAPI, Sockettype: Intern, Low power polling: Yes

Stops after 99th picture on DVD player

I am trying to burn a slideshow and it will play fine on my computer, but everytime I put it in a DVD player, the show stops after the 99th picture. I don't think it has anything to do with the audio, because it is right in the middle of a song. What can I do?

Not all consumer DVD Players do well with slideshows that exceed 99 photos. Here's why:
http://docs.info.apple.com/article.html?artnum=302961
http://docs.info.apple.com/article.html?artnum=302962
iDVD6 treats a photo as a chapter and the DVD standard only allows up to 99 chapters....hence only 99 photos in many set top DVD Players. With iDVD6 you can use more than 99 photos but there is no guarantee that they will play as expected in all DVD players as many set top DVD players will choke trying to go past 99 chapters.
Hope this helps but if not come on back.

Photoshop CC 2014 stop after a few seconds

I'm a CC subscriber and I recently updated my photoshop CC to photoshop CC 2014.
I can start Photoshop but it automatically stops after a few seconds. I've already tried to uninstall / install multiple times without any success.
When I read the file "amt3.log" in my temp dir, I can see "[ERROR] | | | | AMT | | | 7188 | ERROR: Failure Validating Product License!".
So it seems like a licensing issue.
Did anyone faced this issue?
Thanks for your help

I have the exact same error on the log file. I even tried the "nuclear solution" with no more results...
But as I tested the nuclear solution, I uninstalled Lightroom (which worked fine) and I've got the same issue, but I solved it by manually installing it (i.e without using the cc application) and it worked fine.
The installer I used for ligthroom : https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
However, I can't get my hands on a similar installer for Photoshop CC.

IDVD doesn't respond after it says "Done" at the end of Burning

Firstly, I have burn many, many, MANY DVD's before in iDVD (for school camps, special occasions, etc.) and have met this problem before, but in a different way. Those times I was burning about 20 copies, and after about 7 or 8, it would say this problem. My solution was to press cancel, then start burning again IMMEDIATELY, and it would work again.
The Problem: that when burning a DVD (it's a project on Apple as a company. Kinda ironic, because it's all about how fantastic they are, and then this happens). What happens, is that iDVD processes the movies, menus, slideshows, etc. and then gets to the "Burn" part of the burning. Here, the process bar is slowly moving forward, and after about 5 minutes of burning (very normal for my mac) it ejects; BUT!: the menu left on iDVD stays on the "Done" screen forever (at the end of the burning, the remaining time is Done). I checked on my other computer and again on my mac, and it is positively blank (the drive also didn't make as much noise as it usually does when burning). This may have something to do with that it is the first time I have exported a Keynote to a QuickTime, and then put it into iDVD (and I also put some "Get a Mac" ads off the Apple website on it). I asked a good friend of mine about this, and suggested that I put the ads into iMovie '09 and then export into iDVD, just so that they are all definitely the same format, but it didn't work AGAIN! So I put the ads into Keynote, deleted them from iDVD, re-exported them and failed to burn AGAIN X 2! HHEELLPP!!!!!!!!!!!!!!!!!

Update: The problem still occurs, but I had the project due in today, so I put the quicktime of the Keynote on a flash-drive and ran it off my School computer (not a mac... unfortunatley).

After upgrade to 10.8.1, Internet access stops after approx. 50MB of traffic.

I upgraded to Mountain Lion, and when I started upgrading OS components and other apps, downloads would stop after about 50MB. Once this happens, all requests in internet browsers also lost internet access. If I turn Airport off and then on again, I can access the internet but the same problem occurs again once I continue other downloads.
I have other computers and they don't suffer from this problem, so I know if is not my internet provider or my wireless network.
Any ideas?

Me too! I'm also getting display problems in emails where scrambled graphics are overlaid interactive parts of emails like dates telephone numbers!

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

I can´t delete files in trash. It stops after a short time undone. What can I do?

I can´t delete files in trash . It stops after a short time undone.
What can I do? There are 52 files in trash, but if I click the button "sure empty" it shows 11.313 files to delete .
I would be very greatful for your help!

Stronger medicine may be needed, but try this first
Force the Trash to empty using the Option key
This technique uses a hidden feature of Mac OS X to force the Trash to empty. Perform the following steps in the order specified:
Press and hold the mouse button on the Trash icon in the Dock. The context menu for Trash will display.
Press and hold the Option key or the Shift-Option keyboard combination,
Select Empty Trash from the context menu for Trash.
Release the keys pressed and held in step 2.
http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919
You are posting in the iMac PPC forum, but it looks like you have an Intel Mac. Get Trash It if you have an Intel.
http://www.macupdate.com/app/mac/8214/trash-it!

When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one. how do I fix this? These are songs in entire albums that I have purchased.

when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Call export with java function stop after a time

Hi
we make a function java for call exp.exe.
We pass at java's function a string
we use this code
/* * ExecuteCmd.java * This is a sample application that uses the Runtime Object * to execute a program. * */
/* Import the classes needed for Runtime, Process, and Exceptions */
import java.lang.*;
//import java.lang.Process;
import java.io.*;
//import java.lang.InterruptedException;
class ExecuteCmd {
public static int Cmd(String args) {
try {
/* Execute the command using the Runtime object and get the
Process which controls this command */
Process p = Runtime.getRuntime().exec(args);
/* Use the following code to wait for the process to finish
and check the return code from the process */
try {
p.waitFor();
/* Handle exceptions for waitFor() */
} catch (InterruptedException intexc) {
//System.out.println("Interrupted Exception on waitFor: " + intexc.getMessage());
return -1;
return p.exitValue();
/* Handle the exceptions for exec() */
} catch (IOException e) {
// System.out.println("IO Exception from exec : " + e.getMessage());
// e.printStackTrace();
return 1;
after a time the export begin but stop after some time.
If the schema is little like not table but some sequence the export gone normally but if the schema is big the export stop after a time but we dont have a trace with log.
Can you help

I think you need to gobble up the output from the command you are exec'ing. If the exec'd command fills up your command space buffer it will stop when the buffer is full.
Try adding the lines
String s = new String();
while ((s = p.readLine())!=null)
after the try block to gobble up the output from your command call.

IPod Classic Starts to Sync But Stops After 5 Seconds

I'd appreciate help with this...
Two days ago, my iPod Classic stopped syncing. I don't think this is the situation where the device is not recognized. When I connect with the USB, the iPod appears in iTunes and it starts to sync but then stops after about 5 seconds. I have the latest iTunes (11.0.5) and iPod software; I re-set the iPod; and I ran a check for errors on the iPod, but it came back clean; I can't erase the latest backup in Properties because it's empty.
Here's what I don't understand - I ran a diagnostic on the connection but it was ok; when I ran a diagnostic on sync, it said no iPod was found -- even though I had the same connection when I ran the diagnostic a few seconds earlier. I know that the iPod is recognized because I can drag podcasts onto the iPod when it's connected.
Any ideas? I'd rather not have to reinstall iTunes.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK COMPUTER INC. X75VD
iTunes 11.0.5.5
QuickTime 7.7.2
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0026B5780A1E41A0
Current user is not an administrator.
The current local date and time is 2013-08-24 22:33:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 610M
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.5.5 (x64) is currently running.
iTunesHelper 11.0.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26. Device is working properly.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D. Device is working properly.
Intel(R) USB 3.0 eXtensible Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
ALLIE'S IPO (E:\), iPod classic running firmware version 2.0.4
Serial Number:       8K027FWS9ZU
Bus Speed:             61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 6.1.3
Serial Number:       C38GF4D7DTF9
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi,
I had a similar problem, all you can do at present to rectify this is to grab your playlist or new created playlist or song from the main library or playlist and drop it into the ipod tab under devices and it will auto sync the changes or songs. Hope this helps.
There seems to be a problem with the syncing of itunes 11 (mine is 11.0.5) when you just use the normal sync method. the above should work and has worked for me when transfering a playlist straight into the ipod it automatically syncs.
Regards.
Nick

Burning CD's is stopped after 3/4 done???

Similar Messages

Maybe you are looking for