Burning CDs from iTunes - finishes burning but track points wrong.
My CD diagnostics....
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
RM plc D865GLC_
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX 440 with AGP8X\GeForce4 MX 440 with AGP8X
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [1,0]
SBP2\SmartDiskCorp&FireWire_Hard_Drive&CmdSetId104D8&GenDisk, Bus Type IEEE 1394
USBSTOR\DiskOEI-USBCompactFlash___1.01, Bus Type USB
USBSTOR\DiskOEI-USBSM/MS/SD_______1.01, Bus Type USB
IDE\CdRomMATSHITADVD-RAM_SW-9571________________A112___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD-ROM_DDU1612____________________DYS1___, Bus Type ATA, Bus Address [1,0]
Got this weird problem that I havent come across in any other postings. When I try and burn a cd from iTunes it completes burning apparently ok. But when I test back the cd all the track points have slipped so they're not at the start of each tune as they should be. It even cuts off a fraction of the first tune. This must corrupt the cd in a way as altho it plays okay on PC it doesnt play on my hifi cd player anymore, which it used to do. When I say used to, the only difference i can think of is that I have my itunes library on an external drive now (as you can see from my diagnostics). I burned cds fine when the library was on my c drive. Maybe this is coincidence, I dont know. If this is the problem how i can get mend it? Thanks.
RM plc D865GLC Windows XP Pro
If I'm guessing correctly, you've successfully burned an Audio CD. Use a program taht reads Audio CDs (iTunes, MusicMatch, Windows Media Player, etc.), and you'll be fine.
Similar Messages
-
Cannot burn cds from itunes purchased cds or itunes playlists
Hi Queenv77,
Whether or not the track infomation shows up on a burned CD depends on if you are creating an Audio CD or an MP3 CD; track information is not available on audio CDs. The following articles have more information regarding burning CDs from iTunes:
iTunes 10 for Windows: Create your own MP3 CDs
http://support.apple.com/kb/PH1661
iTunes 10 for Windows: Create your own audio CDs
http://support.apple.com/kb/ph1660
How iTunes remembers audio CDs
http://support.apple.com/kb/HT3814
Cheers,
- Brenden -
i purchased an album from itunes,2 of the tracks only partly downloaded.itunes have since sent me the tracks again but they wont sinc with my ipod,which still has the defective tracks on it.any help would be great.
First, I would suggest that you try restoring your iPod (although it sounds like it might be a problem with your iTunes or the files themselves).
For info on restoring and iPod, see this:
Restoring iPod to factory settings
Also, check out the possible solutions in this article, and see if it helps with your issue:
iPod doesn't play purchased content from the iTunes Store
-Kylene -
Import track from itunes to garage band track sped way up
I'm attempting to import a track from iTunes to garageband, but each time the track appears to be compressed and plays very rapidly (chipmunk style).
I recorded the track on my iPod using iTalk.
Any thoughts??
Thanks!
powerbook G4 Mac OS X (10.3.9)http://www.thehangtime.com/gb/gbfaq2.html#toofast
-
Rented video from iTunes for iPad but video is missing?
Rented video from iTunes for iPad but video is missing? Can anyone help
You're sure that it completely downloaded? There may be a downloads button at the bottom on the right side of the iTunes Store app if the movie did not finish downloading.
Did you look in there to make sure that it fully downloaded?
You can also search for it. Swipe down from the middle of the home screen to get to the search field at the top of the screen. Type in the name of the movie and see if it shows up. If it appears, you can tap on it and it will begin to play but that will also start the 24 or 48 hour timer that you get to watch a rental once you start it.
If you are not ready to watch the movie, don't tap on it. But if it shows up in the search, you know it's on the iPad so the next thing that I would do is reset the iPad and then look again in the videos app.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.
Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex -
I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!
All media and apps should be in iTunes on the computer. Simply select the content desired to sync to the device and sync it.
FYI, backups have never included media or apps.
Downloading past purchases from iTunes -
My daughter created an itunes apple id but gave the wrong email so now I can't go to the email and verify her itunes account. I tried to create a new email with the email she put in and I can't because its already taken..,..help
Hi JkeeneSoldano,
Thank you for visiting Apple Support Communities.
To regain access to your Apple ID, try to reset your password using one of these methods:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
From:
If you forgot your Apple ID password - Apple Support
If you need to use the email verification method but don't receive the reset email, see this link for more help:
If you didn't receive your verification or reset email - Apple Support
Best Regards,
Jeremy -
I have restored a new iPhone from an iCloud backup but selected the wrong backup point. Can I do the restore again from a different backup point?
Welcome to the Apple Community.
settings > general > reset > erase all content and settings, once complete the set up assistant will ask if you have an iCloud back up, follow on screen instruction to restore from it. -
Cannot burn CD from itunes.
The thing is, they are in the unprotected format? (
They are protected WMA from when you RIP'd them with WMP. iTunes will not read them.
Go to WMP Tools -> Rip Music.
Under Rip settings, it is set to *Windows Media Audio* and most likely *Copy protect music* is ticked. This is how it is protected.
You will need to reRIP them all from CD. -
CD burner will not burn audio cds from iTunes
I have an Iomega external CD-RW burner that has been working perfectly until now. When I try to burn a cd from a playlist in iTunes, after inserting the blank cd... it says that it is checking the playlist, then the status goes to preparing to burn... and nothing happens. The drive almost appears to be unresponsive & itunes seems to have frozen, but they don't. So I have just ejected the disk and it's blank.
I've tried resetting the computer, power, changing the location of the usb connection, different cd-rs, nothing works.
I tried burning a data cd, which was successful. I just don't understand why it won't burn an audio cd from iTunes. Is there a problem with iTunes? Because it doesn't seem to be the cd burner since it is able to burn data cds.
Any help would be much appreciated. Thank you.
iMac Indigo (2000) Mac OS X (10.3.5)I think it has always been the case that for burning
CDs with iTunes, the requirement is that it is an
internal Apple CD burner and that external ones might
or might not work.
I have used external burners in the past with no problems. -
Burned CDs from iTunes purchases play in some stereo units and not others
My car stereo has no problems playing CDs I've recently burned from itunes purchases. My wife's car stereo can't! She doesn't have an ipod dock in her 9 year old car so it's CDs or nothing. Anyone have any ideas why the discs won't play in her car but do play on every other CD player (including my PC) that we own?
Her car stereo has no issues playing other CDs, including CDs I've burned from itunes which were originally uploaded from CDs by me.
It seems to be the most recent three purchases from itunes that are the problem. Do I need to convert the AAC files back to MP3 before burning or some other clever cheat?
Thnx in advanceThnx for the comments Chris CA.
Yes, Audio CD is selected when I burn the CDs. -
How do I get CDs that have been imported into my iTunes library to sync/transfer to my iPhone?? All the material that I purchased from iTunes has transferred just fine, but although the CDs will import to iTunes, they will not sync up with my phone. How do I do this?? I am very frustrated and would greatly appreciate any help.
In what format did you import the cds?
I have never had an issue with this. -
MP3 CDs from iTunes on stand-alone DVD players
I was reading a couple of threads in this forum on that topic and here are my observations:
Until now I have been burning MP3 CDs in iTunes only as a backup, not for actual listening.
Recently we have purchased a rather cheap stand-alone Grundig DVD player for watching movies, it is also MP3 CD-R/DVD-R compatible. It will play any CD-R or DVD-R with MP3 files on it that has been burned in the standard ISO 9660 or Mac-Hybrid format, either on a PC or using Toast.
The player will not recognize any MP3 CD burned using iTunes 4.x or 6.x, either on an iBook G3 or a Powerbook G4. This is not due to bad or cheap media, all of those CDs show up in iTunes and play correctly. I'm using Sony CD-Rs and I haven't had a single problem with hundreds of them in the past few years. I use them mostly for data backup or for sending client's files to a print office.
If I copy the data from an iTunes MP3 CD to Toast and burn them as an MP3 CD using Toast, the CD will play fine in the DVD player.
So, my summary:
There's definitely something wrong with the way iTunes creates an MP3 CD.
Personally, I don't care much though. If I ever "desperately" needed an MP3 CD to play in that DVD player, a copy of my backup CDs using Toast is done quickly and costs near to nothing.
PowerBook G4/1.67/15 Mac OS X (10.3.9)I found this one, and it's actually super simple and works great;
http://burn-osx.sourceforge.net/Pages/English/home.html
thanks for your help
its called BURN! -
HT4539 Downloaded movie from iTunes in iPad but doesn't show up
I tried purchasing a movie from ITunes on my computer first and it wouldn't finish so then I tried downloading it directly from the IPad and it doesn't show up at all. Am I missing something?
I haven't seen this or read about it here, but this is what I'd try, in order:
(I am assuming you activated the ipad, right? If not, do that first.)
1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset.
3) Reinstall itunes on the computer.
Maybe you are looking for
-
How do I transfer data from a PC to Mac
Hello, I just purchased a new Mac Book Pro and want to get data from my old PC's transferred over.
-
Where can i found the download software of oracle identity manager 9.1.0.
where can i found the download software of oracle identity manager 9.1.0.1 Remote Manager . can any one help me. Edited by: user10545341 on Jul 29, 2011 8:19 AM
-
How to catch event before retrieving data in table?
Hello I use Oracle JDeveloper 11.1.1.2.0 I need to set parameters session (Package Vars) before any refresh my page (I retrieve data from views that use this vars). For this reason I have created method setUserSessionParameters(int[] parameters) in A
-
Hi All, I've picked up another developers code to do some bug fixing and one of the bugs is that on creation of a Purchase Invoice SAP is throwing error "-2010 Internal error". I cannot find any reference to this error code. Does anybody know what t
-
After years of good bars, they have slowly gone (on one of my 2 computers)
I have a desktop and a laptop in the same room. Always had bars from the airport. Last few days the desktop has struggled with 1 or 2 or no bars while the laptop is 5 bars strong. Has something gone wrong in my desktop? Anything I can check or reset?