Burning cds using itunes 7.2

I have just upgraded to itunes 7.2 and now I get an error message saying that it has been installed incorrectly and I won't be able to burn cds. And I can't! Any suggestions how I can fix this. It worked alright on the previous version of itunes and nothing else has been changed.

Looking at other answers to similar problems, from the diagnostics I get:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
PACKARD BELL BV IMEDIA MC 2569
iTunes 7.2.0.34
CD Driver Not Available
CD Driver DLL
LowerFilters: PxHelp20 (2.0.0.0),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce 7300 SE
Connected Device Information:
DiskDrive, ST3160212AS, Bus Type ATA, Bus Address [0,0]
DiskDrive, Apple iPod USB Device, Bus Type USB
DiskDrive, Ext Hard Disk USB Device, Bus Type USB
DiskDrive, Generic USB CF Reader USB Device, Bus Type USB
DiskDrive, Generic USB MS Reader USB Device, Bus Type USB
DiskDrive, Generic USB SD Reader USB Device, Bus Type USB
DiskDrive, Generic USB SM Reader USB Device
CDROM, _NEC DVD_RW ND-3550A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.

Similar Messages

TS1436 I cant burn CDS using itunes but burns using windows media. itunes up to date what now?

I cant burn cds using itunes but burns in window media.itunes up to date what now?

Join the crowd. I was thinking of going back to a previous version, but had heard that could be a problem. Fortunately, I have more than one computer and things work fine there. I'm thinking it could be the burner in the problem computer, but it was working just fine before the upgrade...

HELP! I updated my software and can no longer burn cds using iTunes

I followed all of the troubleshooting steps for not being able to burn a cd. I was able to burn cds with other cd burning programs installed on my pc, but itunes was the only program that would not burn the cd correctly. itunes would go through the entire process of burning: check media, check playlist, burn cd, finish burning cd. itunes would even ask me if I wanted to import the new cd into my playlist after it finished "burning" my cd but there was never anything on the cd. I also tried playing the cd using other programs and in other equipment but it never worked. I updated my software recently and I thought I could try to go back to an older version because I never had this problem before. However, when I uninstalled the newer version and tried to reinstall an older version of itunes, the older version of itunes refused to open because my music library was apparently created by the newer version of itunes. I don't know what to do to be able to burn cds again. At this point, I would much rather use another cd burning program but itunes is the only program that will burn the songs that I've purchased from itunes onto a cd.

Notes usually sync with a mail service i.e gmail, yahoo, aol, etc. Do you have a mail account setup on your product? If so, have you went into Settings > Mail, Contacts, Calendars > Select your mail account > see if notes are toggled on

After burning cds on iTunes using my Mac, every track seems to skip

I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!

jangelbabe5 wrote:
I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!
Burning CDs, especially with iTunes, has always been finicky.
For CDs that have playback problems, the first thing to try is to burn again at a very low speed, e.g. 2x. This selection is made as the "Preferred Speed" in the Burn Disc dialog.
That often solves it, but if not, the next thing to try is a different brand of CD-R blank. (I assume you already know that CD-RWs will not give good results, so it has to be a CD-R.) I eventually gave up on every brand of CD-R blank except Verbatim, but it will depend on your burner.
If there are still problems, try burning a CD on the same computer with a non-iTunes program, such as Toast. If there is a problem with your burner, you will see it.

Can no longer burn CDs in iTunes

I have successfully been burning CDs in iTunes until recently. I can now no longer burn an audio CD. The CDs I am using are the same as before (CD-R, same make etc) and I am trying to burn albums purchased through iTunes. No error message comes up, it just doesn't burn. I have the latest version of iTunes loaded but can't remember when I loaded this. Perhaps my problems have occurred since then? Can anyone help?

Correction... Running OS 10.6.7

Burning cds on itunes

I tried to urn a cd usting itunes, it goes to checking media and than it freezes. I have used itunes to burn cds before and it has just started to do this now. I upgraded to itunes 6.0.2 and the problem still occurs. Help!!!!

jangelbabe5 wrote:
I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!
Burning CDs, especially with iTunes, has always been finicky.
For CDs that have playback problems, the first thing to try is to burn again at a very low speed, e.g. 2x. This selection is made as the "Preferred Speed" in the Burn Disc dialog.
That often solves it, but if not, the next thing to try is a different brand of CD-R blank. (I assume you already know that CD-RWs will not give good results, so it has to be a CD-R.) I eventually gave up on every brand of CD-R blank except Verbatim, but it will depend on your burner.
If there are still problems, try burning a CD on the same computer with a non-iTunes program, such as Toast. If there is a problem with your burner, you will see it.

Patch for error code 2131 when burning CDs in itunes for Toshiba computers:

Just today, Toshiba posted patch for the infamous "error code 2131" when trying to burn CDs in itunes on many Toshiba laptops. Lucky for me, today was the first time I tried to do so, but I feel for all you other folks who have been very frustrated about this issue. Here is the link to it on the Toshiba support page:
http://www.csd.toshiba.com/cgi-bin/tais/su/susc_dtlViewDL.jsp?soid=2024958&moid=1909174&rpn=PSAF3U&BV_SessionID=@@@@043462335 6.1208403240@@@@&BV_EngineID=cccgadedlgfhkdecgfkceghdgngdgnn.0&ct=DL&alldocs=false
I'm going to install it now and report back if there is anything tricky about it (I read in another forum that someone had already gotten the patch and had posted a link to it at a private website where there were a few different options and you had to figure out which was the right one, but this should be easier and "official")
Hope this helps!

Dell Inc. Dell DM051
hmmmmm. i'm proceeding under the assumption that you've got a Dell 5150/E510. if i'm wrong about that, please check in with Dell to confirm your model prior to applying any updates.
i had a look at the support site for your model (or at least, what i'm assuming your model is). your firmware appears to be up to date for the HL-DT-ST DVD+-RW GWA4164B that you're getting the error on, but there does seem to be newer firmware available for the SONY DVD-ROM DDU1615. so it might be worth getting that, just in case there some kind of odd interaction happening between the drives.
Dimension 5150/E510
otherwise, we'd better check on some of the other usual suspects with this sort of thing:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might be helpful with that:
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
Updating the drivers on your Windows PC

Help Please: Unable to Import or Burn CDs with iTunes

Hello,
At some point over the last few updates I seem to have lost the ability to import or burn CDs with iTunes. I've done so many times in the past with no problem however when I attempt to do so now my entire PC restarts or in a few cases gives me the generic Windows "iTunes needs to close" error.
So far I've made sure my PC is not overheating. I've ruled out spyware or viruses using AVG and CCleaner. I've swapped out power supplies only to have the problem continue. I am able to listen to music and/or burn CDs and DVDs in both of my drives using other applications with no problem. I've tried fresh, clean installs of iTunes all the way back to 8.02 with no success. I've even gone as far as to completely reformat Windows only to have this problem continue.
Any help or suggestions would be most welcome. I will be glad to provide any requested information, thank you.
Message was edited by: Simbelmyne

What good is buying your music through itunes if you can't burn a cd and/or back it up? Why isn't this issued solved - I can't burn a cd. I have missing registry files and warning that says to reinstall which I've tried unsuccessfully. Hopefully they'll find a fix before I lose my 500 songs I've purchased...does anyone back up on a external hard drive - any suggestions? Thanks

Can't burn CDs in iTunes

I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
-NKA

Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

Problem was first noticed because I can't burn CDs in iTunes.
The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway ESSEX2
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 440 (Gateway)
NVIDIA GeForce FX 5200 (Gateway)
Connected Device Information:
DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Gateway Essex2 Windows XP

Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

Burning cds from Itunes

Cannot burn cds from itunes purchased cds or itunes playlists

Hi Queenv77,
Whether or not the track infomation shows up on a burned CD depends on if you are creating an Audio CD or an MP3 CD; track information is not available on audio CDs. The following articles have more information regarding burning CDs from iTunes:
iTunes 10 for Windows: Create your own MP3 CDs
http://support.apple.com/kb/PH1661
iTunes 10 for Windows: Create your own audio CDs
http://support.apple.com/kb/ph1660
How iTunes remembers audio CDs
http://support.apple.com/kb/HT3814
Cheers,
- Brenden

Computer freezes when trying to burn cds with itunes

I don't know if this would help other people with issues related to burning cds with itunes but here it goes:
My computer running Windows XP SP2 and itunes 7.6.1.9 suddently stopped burning cds via itunes about a couple of versions ago. Burning would start correctly, however the operation never completed successfully, in fact, the computer would completly freeze before getting too far. The computer had to be hard booted, meaning I had to hold the power button to kill it. The only solution that I've come up with that effectively corrects this problem is as follows:
Close itunes
Go to Start > Control Panel > Administrative Tools > Services
Look for IMAPI CD-Burning COM Service and open it (double-click it):
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Go to Recovery tab and set first, second and subsequent failures to Restart the Service
Click Apply and then Ok to close window
Look for iPod Service and open it:
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Click Apply and then Ok to close window
Restart itunes, try burning a cd from a playlist in itunes. There is no guarantee that this will solve your issue, but it is worth a shot, it has worked for me so far.

Hi Toonz,
My CD Diagnostics....
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard Presario V2000 (PP985PA#ABG)
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
IDE\DiskST94019A_______________________________3.09___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-RW_GWA-4080N_______________0C09___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD-RW GWA-4080N, Rev 0C09
Audio CD in drive.
Found 16 songs on CD, playing time 55:24 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:22:62
Track 3, start time 07:24:45
Track 4, start time 10:48:10
Track 5, start time 15:09:25
Track 6, start time 15:38:00
Track 7, start time 18:13:72
Track 8, start time 24:20:60
Track 9, start time 26:28:05
Track 10, start time 31:11:25
Track 11, start time 34:39:65
Track 12, start time 36:13:22
Track 13, start time 38:48:47
Track 14, start time 43:30:57
Track 15, start time 48:22:65
Track 16, start time 50:48:10
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Why do I get a permanent wait icon and Basic C notice on the task bar on my XP when I burn disks using iTunes?

Why do I get a permanent wait icon and Basic C notice on the task bar on my XP when I burn disks using iTunes? How do I get rid of the wait icon when I leave iTunes?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

I imported cds using iTunes, but...

I imported all of my cds using iTunes, but when I try to get track names I get an error message saying that iTunes cannot get track names because the songs were not imported using iTunes. It then tells me that I need to import using iTunes. I have too many cds in there to do it all over again. What I have done wrong?

Hi,
Not sure you can do anything about this. I get vaiable import speeds - a lot depends on the actual disc. The Read Write spec is 24X but I rarely see speeds close to this.
Jim

Unable to Burn CDs in iTunes for Windows: (Will not fit, but it should.)

I am attempting to fix an issue with a friend's iTunes for Windows. Although previously this computer using this media was able to burn audio CDs through iTunes, recently, an error has appeared before any burn. When loading the proper amount of time to fit on a CD, iTunes claims:
"The songs in this playlist will not fit on one Audio CD"
"Do you want to create multiple Audio CDs with this playlist split across them?"
"This will require more than one CD to complete."
When running CD Diagnostics, I receive the following information:
++++++++++++++++++++++++++++++++++++++++++
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension XPS Gen 2
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: 128MB DDR ATI Radeon 9800 Pro\128MB DDR ATI Radeon 9800 Pro
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD5000KS-00MNB0____________________07.02E07, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX216E_____________________PD01___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Drive is empty.
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 0X.
++++++++++++++++++++++++++++++++++++++++++
Additionally, I copied the iTunes playlist to a new drive that was recently installed with Windows, and the same problem occurs when rebooting under that system.
Also, please note that this issue occured prior to updating to iTunes 7.
Any assistance anyone could offer would be greatly appreciated by both myself and my friend.
Thank you so much,
Keith
iTunes 7 Windows XP Pro

Hey,
Under warranty you'd be better then to call into phone support, if something has to be done with the notebook, they'll be able to set that up with you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I worked on behalf of HP.

Burning cds using itunes 7.2

Similar Messages

Maybe you are looking for