Burning coasters about 50% of the time recently

Anyone else having this problem? As far as I can tell it took place at the same time as the 2.6.19 upgrade and the switch to cdrkit. My IDE dvd-rw drive is loaded as sr0/sg0 as I understand it should be after 2.6.19, and all of the required modules are loaded (sg and sr_mod - correct?) Running wodim -scanbus, things look fine. Here's the relevant error dump of a recent failure in k3b:
System
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.6
Kernel: 2.6.19-ARCH
Devices
HL-DT-ST DVDRAM GSA-4163B A104 (/dev/sr0, /dev/sg0) at [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
K3b
Size of filesystem calculated: 2126059
Used versions
growisofs: 7.0
growisofs
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 16.4x1352KBps.
1114112/4354168832 ( 0.0%) @0.0x, remaining 455:50 RBU 100.0% UBU 2.9%
1114112/4354168832 ( 0.0%) @0.0x, remaining 651:11 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 846:33 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 1107:02 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 1302:23 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 1562:52 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 1758:14 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 1953:35 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 2214:04 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 2409:26 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 2604:47 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 2865:16 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 3060:38 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 3255:59 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 3516:28 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 3711:50 RBU 100.0% UBU 100.0%
1114112/4354168832 ( 0.0%) @0.0x, remaining 3907:11 RBU 100.0% UBU 100.0%
:-[ WRITE@LBA=220h failed with SK=0h/ASC=00h/ACQ=03h]: Input/output error
:-( write failed: Input/output error
/dev/sr0: flushing cache
:-[ SYNCHRONOUS FLUSH CACHE failed with SK=4h/ASC=A0h/ACQ=80h]: Input/output error
I'm also seeing the following in messages.log:
Dec 17 17:07:48 pinkwater ata1: soft resetting port
Dec 17 17:07:48 pinkwater ata1.00: configured for UDMA/33
Dec 17 17:07:48 pinkwater ata1: EH complete
Not sure if that's standard or not, but I don't recall ever seeing it before.

I'm starting to think this is definitely a bug and not flaky media. I've seen postings on LKML about people having problems with similar issues, though not specifically the same. I added "earlymodules=piix" to my kernel options, and this changed my drive back to /dev/hda. I then burned a couple disks in a row w/o any problems, but then encountered this issue:
Dec 17 22:57:30 pinkwater ide: failed opcode was: unknown
Dec 17 22:57:32 pinkwater hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 17 22:57:32 pinkwater ide: failed opcode was: unknown
Dec 17 22:57:32 pinkwater hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 17 22:57:32 pinkwater ide: failed opcode was: unknown
Dec 17 22:57:32 pinkwater hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 17 22:57:32 pinkwater ide: failed opcode was: unknown
Dec 17 22:57:32 pinkwater hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 17 22:57:32 pinkwater ide: failed opcode was: unknown
Dec 17 22:57:32 pinkwater hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 17 22:57:32 pinkwater ide: failed opcode was: unknown
...snip...
During this, K3B was reporting zero FIFO buffer but finished burning the disk like it was good, and even reported success. My DVD drive was basically spinning full speed, and showed no signs of stopping - I let it run for nearly 5 min. I could not eject the media ,even as root, and eventually had to reboot the box.
My mobo has an ICH7 chipset that I've never been able to get to boot while using AHCI, so I've been using IDE mode. I have one SATA drive on the on-board controller, and one IDE drive (my DVD-RW) - I also have a 3ware 9xxx card with a raid5 setup in a PCI-X slot. Prior to recent changes, I've had the occasional hiccup, but this is the first time I've actually been killing discs (the discs all claim to still be empty after a failed burn, but they have been hit at least briefly with a laser, and even trying to multisession on these discs will fail. Coaster city.)
I guess I'll keep googling.

Similar Messages

When I start my computer in the morning, I can't get Firefox to open about 50% of the time. If I restart my computer it works fine.

When I start my computer in the morning and click on Firefox, about 50% of the time it will not open. I've waited approximatly 15 minutes and it still does not open, so it is not that it is loading slowly. Restarting my computer resolves the problem and Firefox works fine. I have Firefox set to always "run as administrator".
== This happened ==
A few times a week
== A few weeks ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; InfoPath.1; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MS-RTC LM 8; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; AskTB5.6)

P.S It might also be a good idea to completely remove all of your Firefox user data and settings (profiles.ini file and Profiles folder) when you [[Uninstall Firefox from your computer|remove the Firefox application from your computer]]. On OS X 10.7 or above:
#Click the Finder icon in the dock.
#On the menu bar, click the Go menu, hold down the option or alt key and select Library. A window will open containing your Library folder.
#Open the "Application Support" folder
#Delete the '''Firefox''' folder containing '''profiles.ini''' and the '''Profiles''' folder.

I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file the email message will crash.

I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file it fails and about 50% of the time when I want to send a standard text massage it will also fail and the email massage crashes. The only way I can get my Outlook to work is if I switch to Firefox web browser. I would rather not switch to a new web browser if I don't have to.
It seems like what ever the problem is that its related the Safari web browser, because it works fine on the Firefox web browser.
I think its some kind of plug-in failure because it giving me a LOC ERROR:
LOC ERROR: Unable to locate localized string for resource ID 5007.
How can I fix this Plug-in?
And, yes my softwer is conpletly updated…

That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

Since I've installed F4, about 50% of the time it won't open.

Windows Vista is my OS. Since I've installed F4, about 50% of the time it won't open, despite the fact that it's listed as a process in the task mgr. I get no error message and have no trouble opening Google or IE. It happens when I've just turned my computer on and when it's already on and I go open F4 to do something. To rectify, I have to either reboot my computer (sometimes multiple times) or actually uninstall and reinstall F4.

I have found that the example given in this thread
"... you would need three smtp servers in your smtp server list, smtp.goddaddy.com:username1, smtp.goddaddy.com:username2, and smtp.goddaddy.com:username3"
also has issues. It appears that the Mail program gets confused if there are identical SMTP server names (and user names that are identical in the first 8 characters) in the list. I had a situation where I had smtp.goddaddy.com:username1, smtp.mac.com:username2, and smtp.goddaddy.com:username3. When trying to send mail from username3's account I kept getting the "can't send mail from SMTP server smtp.goddaddy.com:username1" error message. The message indicated to me that the program had confused the SMTP servers for username1 and username3. Also, the SMTP server for username3 was not in the drop down list available from the error message window from which you get the opportunity to change SMTP server designations. Account preferences looked good and the server list from there also contained the correct information. I changed the the server designation for username3 to smtp.gopapa.com:username3 (my ISP has alternate server designations) and everything works fine.

IMac 24" freezes on boot about 50% of the time

My iMac freezes on bootup about 50% of the time. The freeze occurs prior to getting to the login password screen (the screen is blue when the Mac freezes). Holding down the power button to hard-shutdown the Mac works, and then typically on the next boot, the Mac does not freeze. I noticed that when it does finally finish booting correctly, the Boot Camp partitioned drive takes a long time restore to the desktop ... about a solid minute or two longer than when Finder finishes loading.
The problem has been going on for months, but seems to be getting worse. Using Disk Utility identifies NO errors on either the Mac or Windows boot partitions.
I have the OS up to date with all the latest patches.

HI David,
Go to System Preferences/Account. Click: Login Items. If you have applications listed there to launch on boot, for now, delete them and reboot and see if that makes a difference.
Try maintenance. Mac OS X: How to force background maintenance tasks (logs and temporary items)
Go to System Preferences/Software Updates. Click Scheduled Check then click: Check Now
Make sure your Mac software is up to date. If you install and updates, make sure and run Disk Utility and Repair Disk Permissions after the updates are installed. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
How much available disk space is there? Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data. Not enough available disk space can slow a drive down considerably.
Carolyn

Back button only works about 50% of the time. Have to hit it twice, sometimes three times before it works. Problem is intermittent. Firefox 3.6.10 on Mac OS 10.6.4 (same on both MacBook and iMac machines).

Back button only works about 50% of the time. Have to hit it twice, sometimes three times before it works. Problem is intermittent. Firefox 3.6.10 on Mac OS 10.6.4 (same on both MacBook and iMac machines).

You can try http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Now that I've upgraded to Lion, about 50% of the time when I click the mouse it acts as if I've right clicked. How do I get back to the way it was?!

I am working on two macbooks and an imac. I upgraded all the software last weekend and am now running all three computers on Lion. Over the last week, about 50% of the time when I click the mouse (whether it be the "pad" mouse on the macbooks or the standard mouse on my imac) it acts as thought I've right-clicked. How do I stop this insanity?! I want my old no-right-click mouses back!
Thank you for any guidance!
Jennifer

Try this,
Go to to the Trackpad System Preference and look at the Point and Click tab.
Uncheck the box that says "Tap to Click"
I found my track pad to be way too sensitive and I was finding myself in web pages I did not choose to go to. Unchecking that box will make it so you have to press the track pad to make it click something as opposed to just tapping it. It is more effort but also less sensitive to random taps.
Jay

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

Power button fails to work about 95% of the time

Hello,
I have a Toshiba P205-S6267 that is having a strange issue.
About 95% of the time the power button fails to work when on battery, and it fails 100% of the time when the AC adapter is plugged in.
I am getting pretty stumped on this one and starting to think I may need to replace the 7-button circuit under the power button. Before I spend the $55 to do that, I wanted to see if anyone had any advice for me.
Here are the things I have tried.
- the standard unplug the power / battery and wait a few minutes then plug it back in.
- tried this only on battery, same issue
- tried only on AC, won't power up at all
- checked AC adapter with multimeter and it was outputting the correct voltage (also it keeps the battery charged still)
- removed the keyboard and speaker cover then reseated the 7-button circuit
- cleaned the ribbon cable contacts and reseated the ribbon cable for the circuit
- removed RAM and tried each stick by itself, no change.
I'm kind of lost here. Again, I am probably at a point where I need to replace hardware but I don't want to drop the cash without some kind of verification that I'm not retarded.
Any assistance or advice is welcome. Thank you.

Ah, I've been playing around with this and it seems I was mistaken about the nature of the problem.
It is deterministic, for one. It seemed nondeterministic because the action that makes the glasspane paint() fail is the act of giving focus to the JInternalFrame that the glasspane belongs to.
Why does giving focus to a JInternalFrame disable that frame's GlassPane? I can take focus away from it, and the repaint() method starts working again.

HT1338 I use Outlook for my email, and about 90% of the time when I wont to attach a pdf or jpg file it failes and the email masage crashs. The only was I can get my Outlook to work is if I swich to Firefox.

I use Outlook for my email, and about 90% of the time when I want to attach a pdf or jpg file it failes and andout 50% of the time when I'm trying to send a standered text email I also failes and the email masage crashs. The only way I can get my Outlook to work is if I switch to Firefox. I would rater not have to swich all my bookmarks over to Firefox.
Has any one eals had this problem?

That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

TS3297 After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem? It's not a problem in the settings as I set the rings and tones I want. The rare one comes thru with sound. I never had any problems before update.

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

My macbook pro won't print about 10% of the time

My macbook pro won't print to my wireless printer about 10% of the time. I don't believe it can "find" the printer. Any thoughts?

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

Burning coasters about 50% of the time recently

Similar Messages

Maybe you are looking for