Burning disc error
i have tried updating drivers and windows (xp sp2), reduced writing speed to 8x, udpated itunes, using cd-r and i STILL get an unknown disc error occurred-cannot be burned. here are diagnostics
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCG-K35(UC)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.1.1.48),
UpperFilters: Cdralw2k (6.1.1.48), pwd_2k (6.1.1.48), GEARAspiWDM (2.0.6.1),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
RADEON IGP 345M
ATI MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH11), Bus Type USB
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: SONY DVD RW DW-D56A, Rev PFS3
Audio CD in drive.
Found 15 songs on CD, playing time 58:28 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:20
Track 3, start time 08:40:40
Track 4, start time 12:30:63
Track 5, start time 16:19:25
Track 6, start time 20:16:08
Track 7, start time 24:28:00
Track 8, start time 27:49:71
Track 9, start time 31:58:43
Track 10, start time 35:59:36
Track 11, start time 39:54:44
Track 12, start time 43:31:33
Track 13, start time 47:20:59
Track 14, start time 50:42:43
Track 15, start time 54:29:64
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 12 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SONY DVD RW DW-D56A on CDR media at speed 24X.
please help!!
I tried 3 discs, finally getting it to burn.
Similar Messages
-
Attempt to Burn Disc Error 4280
Everytime I try to burn my music on to a CD or back up my files to a CD I get this error message, please help.
Hello ubbm10,
The article linked below provides some useful troubleshooting steps that can help get your computer burning music again.
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/TA38101
Cheers,
Allen -
Cannot Burn Discs / Error 4450
My iTunes will not burn my selected playlist. I insert a disc, it initializes, begins writing my songs however stops and ejects the disk. An error message pops up,
"attempt to burn disc failed. unknown error occurred 4450"
Once this happens to the disc, the disc is no longer considered blank even though the attempt was cancelled per the computer. I am wasting discs and very frustrated since I was told itunes is very user-friendly. Please help.
Here are the details about my computer:
Pavilion HP Slimline s7500y PC
Microsoft Windows XP Home Edition 2002
iTunes 7.0.2.16
Intel R Celerom RM Processor 1.70 GHz, .99 GB of RAM
I need very specific instructions. I am not a technology savvy person; minimal knowledge of computers. Thanks.I am having the same problem! I have tried everything that has been suggested and nothing has worked. I've downloaded the new version of iTunes, checked for updates on my drivers, reducted the speed and the playback gap, and nothing is working. The CD burns to about the 3rd song, then gives the error message and now that CD is no longer read as empty (I can no longer use it have been forced to throw many away). I'm wasting CDs here! Any help would be greatly appereciated.
HP Media Center m377n Windows XP -
Receiving cancelling burning disc error 4420
I used to be able to burn discs from iTunes. Now a few seconds into burning it stops and I receive a message saying "Burning disc cancelled, error (4420)" and the disc pops out.
Any suggestions how to resolve?
Thanks,
DonHey!
I am having the same frustrating problem. I have run the diagnostics....any thoughts????
Trying to prepare music for a wedding, time is running out!!!! Yikes!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4550
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 420
Connected Device Information:
Disk drive, WDC WD600BB-75CAA0, Bus Type ATA, Bus Address [0,0]
CD-ROM Drive, HL-DT-ST CD-RW GCE-8481B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST CD-RW GCE-8481B, Rev C102
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16 24 32 40 48.
The drive CDRW speeds are: 8 12 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST CD-RW GCE-8481B on CDR media at speed 16X. -
I have a handful of classic movies that I would like to backup. After the decoding from Handbrake, I get an m4v file of 1.76 GB. When I bring it into iDVD, the total is 7.64, 176 min.
The DVD type is set up for DL (7.7). I use Verbatim 8.5 GB.
Encoding is High Quality. Aspect Ratio is 4:3. Original is 16.9.
To keep the file smaller, I use an early non-animated theme.
The DVD burner is a Mac/iDVD compatible that I have used for awhile.
At the end of the encoding session, I keep getting encoding and burn disk errors.
I also tried to use a converted QT and cut segments to make a smaller file, but I lose the sound sync.
There are no red flags in the project info window.
IDVD 7.0.4, 50 GB to spare.
What am I doing wrong?Anything here help?
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/HT1583
Mac OS X: "Unknown Error -2147352480" when burning CD-R, CD-RW, or DVD-R media
http://support.apple.com/kb/HT2718 -
Can't Burn Disc Error Code -54
What is going on? can anyone help? Every time i try to burn something in toast it tells me it can't burn the disc because i don't have the proper access permissions and displays error code -54 afterwards...
-54 is a Permissions error that's right ...
What are you trying to copy/burn ?
What version of Toast are you running ?
Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ... -
ITunes 12.0.1.26 on 2009 Mac Pro will not burn disc - error message medium write error
Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.
Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.
-
Burn Disc Error Code 0x8020063
I've been trying to burn photo files onto a disc for the past 4 days. Initially I was attempting to burn raw photos to a disc and ended up converting the images to JPEG. I've tried using Finder, iPhoto and Apeture and all three programs give me the same error message "This disc could not be verified and might be unrediable. Try again using a new, blank disc. (Error Code 0x80020063)" - I've gone through 8 or 9 blanks discs so far on two separate computers. Any suggestions
Have you tried a different brand of discs? Have you tried cleaning the drive's lens?
-
Continually getting this error when burning a disk on my iMac. What's going on ?
Burning using Finder.Hello,
Make sure you are using CD-R, not CD+R. Also, try a different media. Verbatim, Maxell, Sony...
Also, make sure you have sufficient hard disk space to do this. Right click your MacintoshHD icon, then click: Get Info In the Get Info window click General. Make certain you have a minimum of 15% available drive space.
Also, try deleting this file: com.apple.finder.plist /Users/YourName/Library/Preferences. Drag that file from your Preferences folder to the Trash, empty the Trash and reboot.
Also, run Disk Utility and Repair Disk Permissions. Launch Disk Utility) Applications/Utilities Select MacintoshHD in the panel on the left, select FirstAid and click Repair Disk Permissions. Quit Disk Utility when it's finished and reboot.
Carolyn
Message was edited by: Carolyn Samit -
I'm attempting to burn an audio cd, but as soon as it appears to burn the first song, the cd is spit out and I get the error 4251. This is so frustrating because I have no idea what the error message means. Any ideas?
Windows XP Burning an audio CDAfter several failed attempts at solving my burning issues with Apple support (who had no idea what to do) I have found something out. The new "Protected AAC" formatted songs will cause a "failed burn" error message. I own 2 different computers and have tried 2 different types of CD-Rs. I have found that Windows Media Player will burn just fine, and that in iTunes I can burn all my old music (under "kind" look for "AAC audio file") just fine also. So I seem to have norrowed it down to Apple's new protected formats called "Protected AAC audio file"
So far this is all I've got. Just don't buy anything else from iTunes for now.
Anyone else have any ideas -
Burn disc error 4000 - how can i fix this???
I am trying to burn CD's of music and randomly keep getting this error message - sometimes I can do a CD and then other times I get this message at the end so there is no consistancy in why it is happening....
I see this has been a problem for other people and yet there doesn't seem to be an answer to this???
Please help - I work for a choir and have to produce a lot of music CD's for people and I'm wasting huge amounts of time and money on CD's because of this error.
ThanksKrysten, read here > iTunes: Error 13019 during sync
-
The Attempt to burn disc failed. The burn failed because of a medium write error.
When trying to burn a CD, I'm getting an error that reads:The Attempt to burn disc failed. The burn failed because of a medium write error. I experienced this message before and took my Macbook in to the store and the the genius was stumped but when he tried one of his CD's it burned fine to he concluded that the problem was in the CD's NOT the Macbook or program HOWEVER, months later, I'm having the same issue using the NEW CD's. Does anyone have any information about this?
3 methods to fix this:
The first is to reset pram
at boot up hold four keys down till you hear 3 chimes:
command(apple)=option+p+r
release keys and it will now reboot.
The second is to reset nvram
at boot up hold four keys down:
command(apple)+option+o+f
a black screen will appear
now type: reset-nvram
click enter
now type: reset-all
click enter
it will now reboot
The third is to open system preferences.
go to international
under languages: drag any of the other languages to the top, then drag english back to the top.
make sure "order for sorted lists" is set to english
make sure "word break" is set to english(united states, computer)
then restart.
I hope this helps you as it certainly did me. :^) -
Can somebody help me. I used to be able to burn with no problem. But now while finishing discs, I get the following message.
The Attempt to burn disc failed. The burn failed because of a medium write error.Try a different brand of discs. Try restarting your computer.
-
Error message when burning discs
I can't burn a disc from my playlists. I have the newest version of iTunes but I do not have the burn icon at the top of the page. The only way I can initialize a burn is to right-click the playlist and select "burn playlist to disc". The burn begins properly but somewhere before it is finished it cancels itself and gives me the following message : Unable to burn disc. An unknown error occurred (4251). Any suggestions?
I HAD THE SAME PROBLEM, I GOT THE ERROR 4251, WHAT ID DID WAS TO SELECT A SLOWER BURNING SPEED, I SELECTED 4X, AND IT WORKED FINE, THE CD'S I AM USING ARE MEMEOREX CD-RW 12X, TRY IT AND LET ME KNOW IF IT WORKS.
-
I have made several DVD+R discs in the past using Windows Live Movie Maker sucessfully. I made one about one month ago for my son's b-day. I am using the same discs as I had then. When I tried to burn the disc, it indicates that it is burning, however, when I insert it into the DVD player at home on our TV (like I"ve always done), it indicates disc error. Someone mentioned that the burner goes out every now and then when Itunes is uploaded? When I burn the disc, I can pull it up on my home and work computers, so I know that it is there.
Yes, you can distribute a burned disk of the project to those who can create duplicate disks. Or create a disk image of the iDVD project using the File ➙ Save as Disk Image menu option.
Then you can distribute the disk image to those who will burn the disks. For PCs you'll have to convert the .dmg file to a .iso file so they can burn it. This website describer how: Mac Help - Convert and Burn Mac .dmg or .img to .iso Windows PC-Compatible Disk Image
Suggest to them to burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
It would be prudent to rest your optical drive for about 30 minutes after burning 3 disks in a row. That will give the laser time to cool down before you start another batch.
OT
Maybe you are looking for
-
Every time I click on a video icon, the response I get is that I cannot play the clip because I do not have the correct flashplayer. However, when I click to download it, nothing changes. I even tried disabling my security setting but it still did no
-
I dropped my i phone 5 yesterday.The screen has 5 lines going thru the right and I cant open it. Yesterday i had to switch to my old phone until i could see a genius tonight. I currently have my i phone hooked to my laptop and cant do anything to it
-
Value for a characteristic changed with an other value in Query Design
I want to change the value for a characteristic (Type) in Query Design (not the description, the value). In my cube I have these values: Customer *** Type 22222********SmallCorp 22223********SmallCorp 22224********MedCorp The report should like: Cust
-
How can I set ACLs on MAC remote volumes.
Hi, I am having Mac OS X 10.5 leopard as server and 10.4 as client. I have mounted 10.5 server from 10.4 remotely through Apple Filing Protocol(Basically an AFP mount). On the remote mounted volumes I am unable to enable/set the ACLs right now. But I
-
Need some help with the following: Meshes in an 3D annotation are selectable, clicking a mesh changes it's color. double clicking a mesh selects all meshes in the annotation and draws some kind of wire frame box around all meshes in the scene. I want