Burning DVD with Premiere 12

What's going on... Did you get my message that I use Premiere Elements 12 on a MacBookPro and the Scratch Disks show screen shows like your example - except of the free space which is 504.1 GB ? Sorry about my troubles!
Regards, Justus

Justus
Perhaps Hunt and SG (moderators) can explain what is going on with the posting here. I am not sure why you are having difficulties posting. Perhaps they can give you tips on that or direct your posting problems to the web people.
I have been waiting for follow up in your thread
http://forums.adobe.com/thread/1371518?tstart=0
in order to consider with you what next to solve your issues.
I am strictly an Elements Windows user but you can expect to get first hand Premiere Elements Mac information from SG who runs his Premiere Elements on a Mac. I would hope that he would supply those insights here or in your original thread.
I was trying to find common ground with regard to those Scratch Disks since they appear to be involved in your issue. How is yet to be defined.
You wrote
the Scratch Disks show screen shows like your example - except of the free space which is 504.1 GB
But, could you give us names for specific Paths that you see for each. They would be expected to be different Paths than found in a Windows system.
I did not ignore your prior thread. I was waiting for a reply there and did not see this latest of your threads until just now.
I will do a copy/paste of this post so that you will not miss it.
Thank you.
ATR

Similar Messages

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

Burning dvd with premiere elements 11

I burn video files on to dvds. I always key NTSC widescreen. Sometimes, the image fills the tv screen. Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen. How do I get the image to fill the tv screen?

Thank you for responding to my problem. I'm afraid the reading didn't help. All of my 20 files were created with the same camera, the same project settings, the same equipment, etc. But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall. Most however, have a 2" black border around the image. It makes no sense to me.
Date: Sun, 10 Mar 2013 10:32:25 -0700
From: [email protected]
To: [email protected]
Subject: Burning dvd with premiere elements 11
Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a Power Mac G4. I have previously burned DVDs with no problem. Now I get an error message stating it doesn't recognize the disc and an error

I have a Power Mac G4 with OX 10.4.11. I have previously burned DVDs with no problem. Now I've gotten two different sets of messages. One states that
the disc is not readable and an error code: 0x8002006D. The more recent message states the disc is incompatible and an error code: 0x80020025.
What is going on? I need to burn discs immediately for a conference next week.

"The more recent message states the disc is incompatible and an error code: 0x80020025."
The error (0x80020025) refers to an unsupported drive (not disk). I've read about relaunching the Finder to correct the problem. Choose "Force Quit" from the Apple Menu and then choose "Finder." Click "Relaunch" and see if the drive still produces the error. If there's no change, I'd be tempted to replace the drive.

Cannot Burn DVD with DVD Studio Pro 2

Help.
I can't burn DVDs with DVDSP 2.
Here's the error message :
"Recording Engine : Device is not supported for the requested burn operation."
Anyone else have this problem?
G5 Mac OS X (10.3.9)

Sounds to me like you have a LaCie d2 dual layer burner or one of the LaCie burners that has issues. LaCie has created an updated driver to fix this so check the support site:
http://www.lacie.com/support/drivers/index.htm
-Jake

To BALTWO:I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a p

I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a preserved earlier OS (Snow Leopard). I also don't know how to partition further my drive after all this time…(I used to have Parallels partitioned) but as I said I cannot find any where on the HD SN. Is it possible that it doesn't exist anymore? Not too technical, please, unless that is the only possible answer to this whole delemna..

Blue colored text in these forums usually indicates a clickable link. The two I posted in https://discussions.apple.com/message/18789716#18789716 bring up Apple's articles on those subjects. For partitioning information, peruse Disk Utilities help files, especially
Changing a disk’s formatting and partitions
BTW, the proper way to respond to a post is to use the Reply button and not start another. Good luck and hope you make it to your tenth decade—I'm in my eighth.

Issue burning DVD in premiere elements 13

To shortly summerize my problem:
When I try to burn a DVD premere elements is not really working like it should imho:
At 98% it first gave an error that there were no plugin DLL's. Disk was ejected but useless.
Second and third go it gave an error at 98% indicating that the writespeed was incorrect. Error message was wider then the container showing the message.
Tried burning an DVD ISO to harddisk instead: no errors but also no file. Doublechecked file location, reburned, same issue
Tried to encode to MP4 to harddisk: no issues
Tried reinstalling premiere elements: same issues
Does anyone have a good idea on what to try next?
My computerspecs are as follows:
win8.1 x64
4790Ti
8gb ram
No dedicated video card: intel hd graphics 4600
simple 8 speed usb DVD burner (keep in mind it also won't burn ISO files to harddrive...)
Computer fully patched and up to date, including latest quicktime
Obviously premiere elements 13, but the Dutch version.

Petter01
Juergen may have hit on a critical matter as it relates to the success or failure of Premiere Elements 13 and its Burn To: Blu-ray ISO Image (25 GB).
Other ISO Image opportunities (for DVD and AVCHD) in Premiere Elements 13 have not yet been brought into the matter.
For many posts, Juergen has been reporting that he can generate a Premiere Elements 13.iso image for Blu-ray, but when the .iso is taken to disc, the player does not recognize
the disc content. Only recently has he mentioned that the issue seems to be related to the file size of the .iso image produced. He said that if the Premiere Elements 13 iso file exceeded about 1.1 GB, the Blu-ray disc format on Blu-ray disc produced in ImgBurn could not be read by the players.
Last night, I checked into that to see if I could confirm Juergen's observation. I have. This is a serious setback for Premiere Elements 13 which finally offers an Blu-ray ISO Image as an alternative to the Burn To: Disc product.
So, for you to confirm.....
1. Are you doing Publish+Share/Disc/DVD with Burn To: = ISO Image?
2. If so, are you actually seeing an .iso image generated and saved to your computer hard drive?
If so, what is the file size of the .iso file produced?
3. What is the file size for the DVD .iso file that you take into ImgBurn for burn to DVD disc to the correct disc files system,
is the disc content recognized by your player? If so, what player.
Thanks.
ATR

HOW TO MAKE A HIGH DEFINITION AUDIO DVD WITH PREMIERE CS2

I have been working with my CS2 Premiere to create some auto play high definition, audio-only DVDs that are autoplay. To clear the air, yes I know that CS4 will permit 24bit-96 kHz. For the time being 16 bit-48 kHz, is still better (marginally) than CD, but it permits greater playing times. Yes, I know that the autoplay without menues "feature" is bogus, and was never corrected by Adobe. So much for their interest in their customers.
I found a simple workaround for the autoplay/no menues feature. Just make a DVD-RW with menues. Then use DVD-DeCryper/Shrink/Nero - whatever to make an autoplay DVD onto a permanent disc. It works well.
Here is my latest crazy problem: How to get really long playing time. I know I can make high qualitye DVD-A's up to 3 hours using Minatonka Bronze. Unfortunately, DVD-A discs are worthless as they cannot play in 90% of DVD players, but they prove the time point.
I have three 48 kHz files that I created in Adobe Audion. The were 1.599, 0.911, and 0.974 GBs in size. That added up to 3.480. The playing time is about 2:30 Hours; quite a bit less than 3 hours.   I tried burning a DVD with these, audio-files-only. I checked lowest quality video, used no video, and got an Export To DVD error that I had "insufficient" space on the 4.7 GB disc! So, I used the two latter files, which added to only 1.884 GB. Premiere did not baulk, and it successfully burned a DVD that played. Then I added the 1.599 GB file, and, once again, it produced an error. This was clearly not going to work.
At this point, I realized that Audition had done what it liked to do: It had saved the 16 bit-48 kHz files as 32 bit-48 kHz! So, I went back to Audition and used EDIT to change the files to genuine 16 bit-48 kHz files. When I opened them in Premiere, Premiere reported 16 bit-48 kHz files. Their sizes were now, 0.799, 0.456, and 0.487 GB. Please note that this totals 1.742 GB. This is less than the 1.884 GB I had successfully used before.   Once again, I was getting the "inssufficient" space error. This is nuts. The disc can hold 4.3+ GB, but won't fit 1.742.GB.
So, anybody got some ideas?
Mike

Jim,
I cannot believe you are wasting my time and the space of this forum with your irrelevances. It would have been better had you just tried to answer my question, which is the purpose of these forums. Why engage in useless chatter?
I said nothing about any great sonic difference betweein 16/48 and 16/44 digital audio; I said "marginally."   In English that means very little difference. I'm not going to prove to you with distortion and frequency response plots that there is some minor difference, it is a fact of life. You, in fact, just stated a difference. The difference between a 24 kHz cutoff and a 22 kHz custoff is a difference which you give, to back up your absurd statement that there is no difference. This can actually translate to a minor, difference in THD at higher audio frequencies, but who cares?   Well, you apparently care, because your beligerant non-reply to my question was that "fewer...would notice ." In English that means that some would notice.
What my question had to do with MP3 junk, or multichannel sound, I don't know. Why should I do, as you suggest, and make DVD-A's when one needs only stereo? This is a Premier forum, not a DVD-A forum. Why not bother DVD-A junkies on Minatonka fourms? DVDs can handle stereo PCM very nicely. Classic Audio has marketed their 24/96 DADs for many years and so have a few other companies.   They have been well received by some "golden eared" types. I hope they don't upset you. There is a good possibility that DVD may only be around as a "legacy" feature on BLU RAY in future years. DVD-A was DOA years ago and SACD may go just away; DVD-A is almost that. So, PCM stereo sound DVD's are a good bet that the resultant disc will be playable on many people's players as well as future players. The longer playing time that may be available would make listening to concerts easier, rather than breaking them up into segments.
If you want to argue my motives, or tastes, I suggest you go to another forum and discuss you theories. If you actually have something productive to say about the problem I pointed out, that would be welcome.
Mike

Burn DVD with Premier Elements 12

When I try to burn a DVD with Premier Elements 12 it gets stuck at 5%. I cannot cancel it. It just keep running. It was working before, but has not worked the last 3 times I tried it.
.

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to disc (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

Unknown error 2130906112 while burning DVD in Premiere Elements

Hi am trying to burn a DVD using Premiere Elements 3.0. My computer will go through the lengthy process of attempting to burn the CD. At the very end, the drive pops the DVD out and I get a message that states: Unknown error 2130906112. I have burned successfully in the past, but am unable to now. I have tried to do this about 7 times with this specific project and have had no success. I have used two different types of DVD+R (Memorex and Verbatim). My project is approximately 56 minutes long. Any help and/or advice is greatly appreciated!!!!

Great news!
I just can't see which is highlighted while doing so. I think it has to do with the template I chose in Premiere Elements while designing the movie.
The lack of the Sub-picture Highlights (the official name for the indicators of which Button one has navigated to), could be caused by several things:
1.) the inability of the PS3 to adequately display them. Like I said earlier, most people, that I know, use the PS3's for BD playing. The specs. are different for those, as opposed to the DVD-specs. I just do not know about the PS3.
2.) could be a problem with the Template. Which one did you choose? I'll be glad to check it out (if PrE4 has it) and report any issues that I find. Did you modify this Template, say in Photoshop/PSElements? Could be that one of those modifications turned ON all Sub-picture Highlights.
3.) could be a problem with the "authoring" phase of the Project. This is after the editing, and is where one assembles the Assets (Menus, etc.) and does the navigation. As PrE is semi-automatic, it does most of this for the user, with little intervention. Still, there could be ways to accidently mess something up here, though it's highly unlikely. Now, in my authoring program, all is done by hand, so I have hundreds of opportunities to make a mess of a Project - PrE shields the user from most of these.
Now, to your questions:
Can I use the Img software for all burning projects including CDs?
Yes. You can do most forms of burning, including CD's (Audio, Video or Data), so long as you have the right types of files.
What is the best way to organize and store my video files?
This is the $64,000 question. So much depends on what one has, how they are likely to need to access them and what equipment they either own, or wish to purchase. I'll give you my scheme, though it might be overkill for you. Still, you can get an idea and are free to adapt any part of it for your needs.
I work with several types of Assets: original (or stock) still images, Captured (stock, or client-supplied) motion, Audio (original, stock or extracted from the previously mentioned motion Assets, Menus (Templates and original creations), Titles (same) and then my Projects.
I keep the originals on both a NAS (Networked Attached Storage) drive that is networked to all of my computers, and also on external storage HDD's. I also back up to DVD-Data discs. For Captured, original Video, I also store all tapes and do NOT overwrite/reuse any. I only work with Copies of any of the Assets (the Captures are probably the exception, as I have the tapes, should I need to re-Capture).
I use several media browsers to organize my Assets. I then locate those necessary for a Project, and create a folder structure for that Project. Copies of the Assets are placed in that folder structure, beneath the Project name. Again - these are Copies, in case something happens.
Depending on what I need to do, the Scratch Disks (set with Edit>Preferences) are usually kept within the Project's folder structure too. Same for Exports. As I use a different program to author DVD's (Adobe Encore), I create my Encore Project within this structure too. The files that I Export from PrPro (my NLE of choice), are the ones that I then Import into Encore for authoring the Project.
When done, I Archive the editing Project and also the Encore Project, to another external drive. I will always make one additional copy of my output DVD as a backup, as I can use ImgBurn, or another utility, to Copy DVD.
After all of this, I can then safely Delete my entire Project folder from the system. Remember, it contains no origianl Assets (other than Captured materail), as I have everything on the NAS, plus an external, plus the backup DVD-Data disc. Right now, I have about 30 1 - 2TB external HDD's that I use. Some are for backup, and some are to allow me to move my Projects between my laptop or my workstation.
Hope that this helps. As I said, it's probably overkill, but much of the work that I do is for clients. If they come back with a change, or a problem, I want to be able to help them immediately.
Good luck and good questions,
Hunt

Burning dvd with no menu

Hello,
I am looking for a way to burn a movie so that the movie automatically plays when ou put it in the dvd player, without a menu screen coming up first. is that possible?

I have burned dvd's from idvd with no menue. What i did was go to the themed screen I chose, whether I want to use it or not in the final burn, and click on the "three boxes" icon (called the" show the DVD map")on the bottom of the menu page. It shows a box with the words "Drag content here to automatically play when disc is inserted.What I do is click and drag the movie to that gray box, and then continue on to burn the dvd to a disk. the dvd will burn and will automatically play when you insert the finished dvd into a dvd player.
aheart4god2

Internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401 when burning DVD with sl

I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401

This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
hope this help someone else skip the frustration i had.

How do i burn dvd with no menu - just play?

hello,
I need to burn a dvd with no menu, so that when it plays, it goes straight to movie...
thanks,
steve

Steve - import your asset into DVDSP so that it appears in the assets tab. When imported (and the button shows green), drag the footage into the time line. This sets the footage into 'track 1'.
If you look in the outline view you will see Menu1 and Track 1 listed. menu 1 is the default choice for 'First Play' - if you now click on the disc icon at the top of the outline view then look in the property inspector you will find another way of setting 'First Play' - simply use the option to select the track instead.
If you control+click on the track icon in the outline view (or in the graphical view for DVDSP 3+) you get the option to set First Play there too - simply select the words at the top of the contextual menu.
Check here too:
http://www.kenstone.net/fcphomepage/first_playwarmouth.html

Unable to burn DVD with iMovie?

Am fairly dissapointed with Apple.
I have spent time today creating a short movie of photos of my 2 month old son.
When trying to share with iDVD I have realised that my iLife 11 doesn't come with this software and I can't download it!
I am therefore unable to burn my project to disc and feel I have wasted my time.
In my opinion this seriously reduces the usablility of iMovie.
Is there anyway I can burn the DVD without spending a shed load of cash on some third party software??
Thanks

I was also disappointed when I bought my Mac and it came without iWeb and iDVD.
For burning DVDs, I use a free app called Burn http://burn-osx.sourceforge.net/Pages/English/home.html.
You can't do fancy menus or anything that iDVD can, but at least you can get your iMovie Projects onto a DVD.
You have to export your project from iMovie and then drag the .m4v or .mov file that comes out onto Burn (Make sure the Video tab at the top is selected.
Of course, if you have a MacBook Air, you'll need an external optical drive capable of burning DVDs.

Bad quallity film after burning dvd with idvdv professional quality.

After making a movie in imovie and importing it in idvdv the quality is still HD
after burning a dvd with professional quality the quatity of the dvdv is very poor. Horizontal lines are dancing over the screen!!
Can anyone tell me wat is going on???

Keep in mind that all Dvd's burned through your mac and are playable on your mac as well as your set top DVD player are ALWAYS standard definition /SD. There is no way around this (that is if your intentions is for playback on most computers and most set top Dvd Players.
One of the limiting factors is apple's dvd player app. It isn't fully blu-ray compatible yet. Meaning that even if you did burn a high def. Dvd which is only playble on Sony's PS3 and most set top Blu-ray players .... the finished Dvd won't play on your mac since apple has yet to update/upgrade their DVD Player application to fully incorporate Blu-ray standards. To the best of my knowledge, apple's support is very limited here. Hence the alternative for mac users is to use Roxio Toast's Blu-ray plug in as well as Toast Blu-ray player. If you opt to go high def through Toast then the completed Dvd will NOT play on most set top dvd players but will on most Blu-ray Players as well as Sony's PS3.
Hope this advice helps but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Burning DVD with Premiere 12

Similar Messages

Maybe you are looking for