Burning dvds

i have two questios the first one is why i can't import videos from my camera? well i can but i can't open them, they are on mpeg format or something like that. and the other question is, once i can import the videos can i burn dvds from my macbook?

I had this same problem back in early June. All of a sudden after burning hundreds of DVDs I started getting errors.
I did a lot of research and it appears it has something to do with some Microsoft updates. One in particular may be the culprit...the "Cumulative Update for Media Center for Windows Vista x64-based Systems (KB967632)". I believe that the Vista SP2 can be an issue.
Check your "Programs and Features" under the Control Panel and "View Installed Updates". If KB967632 is installed, try removing it.
Good luck.

Similar Messages

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Can't burn DVDs? Try this first...

Like a number of other folks, I had an unexplained failure to burn DVDs and thought something Very Bad had happened to my drive. However, doing some research before buying a new drive (if I had to buy one, might as well get the Latest and Greatest right?) I found there's a lot of really bad media out there. Companies are buying some really cheap junk, slapping their label on it, and putting it on the shelves.
So before doing anything drastic, try this:
Go to Applications -> Utilities and start "System Profiler".
In System Profiler, left hand column (labeled "contents") click "Disc Burning".
Insert a disk you haven't been able to burn.
When (sometimes "if") the disc mounts, refresh System Profiler (command-R or from the View menu select "Refresh"). At some point, you should get something like this:
Media:
Type: DVD-R
ID: CMC MAG. AM3
Blank: No
Erasable: No
Overwritable: No
Appendable: No
Pay attention to the ID field. In this case, "CMC MAG. AM3"
Pop over to:
http://www.digitalfaq.com/media/dvdmedia.htm
And search for your disc ID. This likely is "all run together". That is, for "CMC MAG. AM3", you look for:
CMCMAGAM3
And, presto, the discs my drive "quit" on are listed in the section:
"4TH CLASS MEDIA:
"Pathetic garbage media, landfill material, about 0-50% success rate. These discs are pretty much only suited for preventing drink cup rings from forming on a table. Most of the time, these are ready-made coasters. If you can actually get a burner to acknowledge the disc, do not expect much. And if the burn actually succeeds, do not be surprised if a DVD-ROM or player chokes on the disc (read/play errors). Cheap prices, cheap junk quality."
How nice!
Mind you, I did not buy "CMC Magnetics" discs. I bought a "brand name". I got CMC Magnetics discs with a "brand name" label. And, apparently, their lowest quality (they do have some listed as "3rd Class Media" but not the ones I have).
This would also explain why I managed to get several burns from the spindle then everything just up and stopped. A "0-50% success rate" means I can expect half *or more* of the discs to fail. I managed about 30% before reaching a run of total garbage in the spindle.
(In fact, many of the remaining discs--I've taken different ones out of the spindle at random--won't even mount.)
Also, the fact that companies are "out sourcing" means that even though you may have tried different "brands", you may actually still be getting discs from the same crappy factory! Scroll down to "Branding Guide" at the digitalfaq.com site and you find that CMC is supplying (among many):
Datawrite, HP, Maxell, Memorex, Staples, and some TDK even!
Buying different "brands" doesn't necessarily mean you've bought different discs.
So before doing anything drastic, before assuming the drive has konked out, buy some one packs or three packs of the "1st Class Media" and try them. I haven't a problem with the ones I bought from companies listed as providing "1st Class Media".
Based on the "Branding Guide", I suggest buying a few from one or more of:
Verbatim
Sony
Panasonic
Then see if your drive problem suddenly clears up. Did for me. Now to figure out what to do with the 60+ CMC coasters I have left...

Matt Clifton wrote:
A great tip that works in OS X 10.5.
Does anyone know how to get the same information under 10.4?
If Disk Utility in 10.4 doesn't do it, there are two things I've seen that could help though I cannot vouch for them. One is a little utility here:
http://tinyurl.com/yr6brj
Now, that's a Google translated page in Japanese. But I could find no other widgets out there that read the info. I did download the program from here:
http://homepage.mac.com/raktajino/dvdmediainspector/dvdmediainspector-1.0b1.dmg
And tried it out. It worked for me. Just leave the "Format" setting to: Pre-recorded Information in Lead-in. Insert a disk, click on the drive name in the top box of the window when the name appears (takes a sec as the disk is mounted). You get hex (which to most folks is known as "gibberish" <g>). But in the first couple of lines on the right hand side, you should see the manufacturer info such as:
read DVD structure [0E]
00 6C 00 00 01 40 C1 FD 9E D8 52 00 02 84 0D 12 [email protected].....
98 99 90 00 03 43 4D 43 20 4D 41 00 04 47 2E 20 .....CMC MA..G.
41 4D 33 00 05 88 80 00 00 00 02 00 06 09 0D 14 AM3.............
Second line, far right, you see the "CMC MAG AM3" (with some spaces in "MAG", no I don't know why). Of course, you'll be looking for codes from here:
http://www.digitalfaq.com/media/dvdmedia.htm
They should show up somewhere in those first few lines.
According to this discussion:
http://www.hydrogenaudio.org/forums/index.php?showtopic=56774
You can get the info in Toast. I can't verify that myself as I don't have the software.

I would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players...thank you

i would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players..also is it possible to upload store boughten dvds/bluerays to my macbook..if so does anyone know how one would do that ? im just getting used to this mac and i do love it but alas i am comp stupid hahaha...thank you

Toast Titanium by Roxio.

How can I convert my imovie from ipad to burn dvd on PC

I have produced a 30 minute video for my son's football team using Imovie on my ipad. I do not have an apple computer and need to convert the imovie to my PC in order to burn DVD's. This process seems impossible. I have read many forums and am trying to export the project to my camera roll, however the process never completes itself. It will export for literally hours without completing the process. This project have taken me weeks to complete, mainly because the process is very slow with imovie and extremely frustating. Now, I'm ready to finish up and am so worried I will never get it off my ipad. What do I do??

NO files larger that 500mb (which is **** near any video) will not transfer!
At: http://support.apple.com/kb/HT4083
It incorrectly state this:
"Windows XP cannot import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files directly from your device by selecting them in My Computer and dragging or copying the movie files to your computer's hard drive."
Problem is that NO videos are shown as I open my ipad up in "My Computer", only photographs I have taken
THIS INSANE. You put Hign Def Video camera on the IPAD and NO simple way to get the you home made videos of it? Search this topic "transfer video from ipad to computer" you get NO help. the only responses are from people hocking there "computer programs that will do it" or "apps" that transfer files.
Apple here is the reality. At this point, regarding computers, PC is King...get it? We do not all have apple computers to go along with our ipads. ... So incase i need to break it down for you....YOU NEED TO HAVE A EASY WAY TO REMOVE VIDEOS FROM AN IPAD TO A FREAKIN PC...
I am not sure what is most amazing:
-ipad designers not seeing this as a problem
-the lies at http://support.apple.com/kb/HT4083 that discuss easy it is to simply open up "my computer" and drag an drop
-ignorant people responding to several other people with my same simple problem with stupid response like "so you want to put a video on your ipad, you do that thru itunes" or "gosh it's been a while since i did this but its real easy, i think..."
There are not even any you tube videos on the subject... Am I in Bizzaro World here????

Error when burning DVD

I just bought a Mac a few weeks ago, and have had some trouble burning DVD's. I have a G5 running 10.3.9, with a Pioneer Superdrive. I try to burn an image in Disk Utility, but get the error message "The disc is reserved for exclusive use by another application". When I try just burning files using finder, it says "This disc cannot be used". I have tried DVD-R and DVD+R. Anyone have any ideas?
Thanks!

Hi macaboo
Welcome to apple discussions. Just to add to the already excellent advice kindly provided to you by Fred Shippey;
I too have one or two suggestions:
First is to delete the plist for iDvd (but first quit the app). The plist is located in your preferences folder and looks like this (assuming the app has been launched at least once):
com.apple.iDvd.plist
Now try your iDvd project again. But if that too fails then ...
Delete encoded assets from the Advanced menu tab and then try the burn again.
That procedure looks like this. Hope this helps but if not just come on back. Good luck.
Click Here
Message was edited by: SDMacuser

Error when burning dvd's

I have a satellite a305 with vista. I had been downloading torrents awhile back and got a nasty something because my computer went crazy. I managed to "fix" it except that the keyboard and mouse were nonresponsive. A usb mouse worked but no usb keyboard would install. Despite this, I was still able to burn dvd's.
Now, since it is unacceptable to NOT have a properly working keyboard I had to factory reset the computer. Now it all works great.
EXCEPT when I burn a dvd (dropping files to it....I haven't downloaded any 3rd party software) it starts to encode...gets to about 3.5% and then encodes super fast (usually burning a dvd takes 1 1/2 to 2 hours) and eject the disc after 30 seconds. A window pops up saying an error ocurred while burning the dvd. I am using memorex dvd-r discs. It did the same thing when I used my old disks (Sony dvd-r) but I assumed that since they were scratched a bit that must be causing an error.
I just want to make my DVD's. So frustrated!! I tried checking to see if Toshiba had a driver update I was missing since I did an out of the box reset, but they're screen to choose my laptop doesn't have my model available.
Any ideas for me?

Since Toast is not an Apple product, you should probably post your question on Roxio's discussion boards:
http://forums.support.roxio.com/

Burning DVD from disc image

I've been burning DVD's from disc images using Encore 1.0 for some time now. ever since I upgraded to 2.0, Encore gives me error messages on my project like:
"first play not set" and
"remote control problem".
I don't see how these messages can appear when I'm using a disc image (i.e. a completed project) as the source. does anyone know?

When you click on the Build DVD button in the Disc panel, Encore does a quick check of errors
in the current project. If you have a new, empty project, you will at least get errors about First Play and Title Remote. Those errors have nothing to do with your disc image, they apply to the current project, from which you are trying to burn your disc image.
These errors may be safely ignored, since they don't have any effect on your disc image.
-Jeff

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

Superdrive stopped burning DVD no longer recognized by computer

I am using an i Book G4. I have been consistently burning DVD's on the superdrive for several days. Today in iDVD it said there was no superdrive on the computer. I can however play DVD's on the drive. Is this a soft ware or hard ware problem? I don't know what else to check. Any help will be appreciated. Thanks

I assume what you were asking was what program I was using to burn the DVD. I was using iDVD and that is the program that first told me my machine did not have a burner. I use the disk image to actually burn the DVD. I have found it much more stable than trying to burn from iDVD no matter which of the 3 Mac computers I use. Thanks for you input. I was hoping there was a way to see if there was a software corruption causing the burn DVD to disconnect. I appreciate your interest.

Error message when burning DVDs

Hi, I've been burning DVDs on my computer for over a year. However I'm now getting the following error message:
sense key = medium error
sense code = 0 x 57
Unable to recover table of contents.
I've tried documents and video and a couple of different blank DVD brands...Is it stuffed or fixable. FYI the cd burner is working fine and its reading DVDs Ok as well.
Thanks
Peter

Thanks for the suggestion.
I ran the Onyx on both my machines and still have the same problems.
The PB 1.25 whirls and spits the discs out (any disc).
The iMac 800 now has a new error code since running Onyx.
0x80020022 instead of 0x8002006e
The message reads "communication to the disc drive failed."
I'm going to try one last thing with the iMac. That is using those expensive Apple-made and approved DVD's. I'm using Maxell DVD-RW. Never had a problem with them on the PB, never used them on the iMac. I'm off to the dealer... I'm buying an external DVD burner for the PB- $200 vs. $600... it's a no brainer, just none of the convenience... best, Edward

Error occur when burning DVD

My macbook pro can't burn DVD, both DVD-r and DVD+R DL.
I tried to use a better media (eg. verbatim) and slower speed (1X)
but the problem comes again and again.
I suspect the error may relate to the failure of "laser component" in the DVD drive
Because when I was using LiquidCD ,whcih is a DVD buring software, to burn DVDs,
the error message said that the software cannot control the strength of the laser.
Does it mean the problem relates to the failure of "laser component" in the DVD drive?
Also, I tried Hardware Test, but it said everything is fine.
Any method can help to check or solve the problem?

Take it to an Apple Store or call Applecare assuming it is under warranty. Is this problem only with this software, which I have to admit I have never heard of.
Out of warranty I'd get an external burner vs. fix it since they perform better anyway.

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

Can No Longer Burn DVDs

I have a Lenovo G700 series laptop and have recently found that I can no longer burn DVDs. I can burn CDs and the drive can read DVDs & CDs.
I trawled the forums for any clue of what has gone askew including the registry fix, tried different media, different burning programs, files vs disc images and still no result.
I, and also a friend who works in IT suspect a hardware fault and, since still under warranty, contacted the support helpline who were quick to answer. went through all the options for diagnostics and came down the "hit the system with the One-Key-Recovery" option to reset it back to factory preset condition to see if that fixed it.
Problem........
I have spent a very long time getting this machine set up with my home studio software etc and have large amounts of data which beggers the question, do I want to go through all that and how do I back up all my data prior to that as the machine will be wiped with no DVD writer. I assured the guy on the phone that we we almost certain that it was the ODD hardware that had failed and could he send out a replacement?
Being still under warranty, I would have to return it to the service center where they would......... guess what, reset to factory preset prior to fitting the new hardware to ensure that the hardware was indeed faulty.
Aaaaaaaaaaaaaaaaaaaaaaaaargh!!!!
Catch 22
Why can they not just send out a replacement drive for me to fit myself?
Warranty runs out in September which is probably how long it will take me to zip and backup my data using CDs or for out a pile of cash on a USB HDD all for the price of a replacement drive.
Can someone please help?

Anyone know how I can get someone from Lenovo Customer Support to read & reply to this post? I'm not that sussed with forum methods.

Can no longer burn DVD's on my MacBook Pro

As the title says, I can no longer burn DVD's. I can burn CD's but not DVD's. I get Sense= code errors and stuff no matter what burner I try out. It doesn't always want to read the DVD's either but ejects them one- two times before it surrenders and starts reading the disc. I've had this Mac for about 1.4 years and I haven't been sitting around every day since, slotting 30 discs in and out of it all day long, i.e the drive hasn't seen that much action to justify this problem.
It can't have anything to do with the media as I've been reading a lot about since the DVD's I try to use have worked perfectly fine before this problem popped up. And I find it hard to believe that my $3200 Mac aint equipped to burn these things and especially not since it was able to earlier. It stopped burning about 2-3 months ago so my guesstimate is that one update or the other from Apple screwed things up but I have no idea how to find out what that might be or more to the point how to solve it.
So, since I strongly disbelieve the media factor ( I have tried different brands and that if it would only be able to burn Verbatim discs then that would be ridiculous ) I wonder if there's any real solution to this. Any firmware to be found for it or some such? I've tried to browse around the Downloads section but can't seem to find anything that addresses this issue. I've also googled quite a bit about it and I've found many others who experience the same problem(s) but never any real solution for it.
Any help would be greatly appreciated.
Thanks.

A lot of folks have found that running a DVD Lens Cleaner disc through can often fix this sort of calibration and sensor problem, it only takes a small spec of dirt or dust to cause errors ...

Can no longer burn dvds or upload

Recently my premier elements 11 stopped being able to burn a dvd or upload to youtube...
dvd just goes to indexing but never continues. Upload to youtube stops at 81 % and freezes.
No real error messages. Tried re-installing software but does the same thing.
Worked for last 4 years on same PC running windows 8...now wont?
HELP!

(I'm replying to your comments from below and: I'm including 2 other individuals (CC) in this reply; asking for their help as well, if they have any potential answers for me.) Please advice ...
I'm using Adobe Premier Elements 11 on an HP Windows Pro 8.1 desk top PC. It's been working perfect since I loaded it in 2011. I produce and create a 30 minute TV show for a couple of my local community TV Stations in the area as well as make videos on real estate and publish them to You Tube (Finding New Neighbors <<< see my You Tube Network for sample of my videos). I also create DVD's for real estate properties to use during open houses and as marketing tools for real estate. I also make training videos for the local Board of Realtor's. Uploading these videos to You Tube and burning DVD's is very critical to my business.
I currently have episodes of the TV show ready to burn but I can't get them to burn so I can turn them into the TV Stations for airing.
It was working perfect until recently; however, I can no longer burn a DVD or upload to You Tube. The edit program seems to be working fine. I can still create videos, edit and view videos on the program but I can't send them anywhere to be used in any way. When I attempt to burn a disk; it gets ready to burn then nothing happens. When I attempt to upload to You Tube; it will "Render" and start to Upload but then it get's to about 61% to 99% (uploaded) then freezes up and never finishes.
I've had our office computer support person in working on my PC for the past 4 days and we're getting no where. He did find a virus and cleaned it out. Everything "seems" to be working now except my DVD burner and uploading videos to You Tube. I even reloaded the Adobe Premier Elements 11 software to see if that could be an issue. It made no difference.
Somehow, the program is no longer speaking properly to whatever pathway it needs to, in order for the DVD's or You Tube to receive the video/s and finish.
I really need to get this fixed; otherwise, months worth of work is lost and I will not be able to create or publish any future videos. I really need this working. Any help would be appreciated immensely.
[email remnants removed by moderator]

Burning dvds

Similar Messages

Maybe you are looking for