Burning Error: "No more track reservations allowed"

I'm trying to burn a large project to a dual-layer DVD. I left it to burn at the office last night, and arrived this morning to find the following error:
The recording device reported the illegal request: No more track reservations allowed. (0x72, 0x05.)
Any ideas what/why that might be? I'm an absolute beginner. FWIW, as soon as I open the project in question, I notice in Activity Monitor that the following two processes stop responding:
DSPX_EncoderServer
DSPX_AEncoderServer
Thanks for any help.
G5 Dual 2GHz Mac OS X (10.4.4) PB 17" 1.5GHz

The project was captured originally into iMovie,
edited in FCP 5.0.4, exported via compressor as
MPEG-2 at 7.5 Mbps (is that waay too high?),
Could be for some playersif you get playback errors
(once it gets burned) that would be the first place
to check (saw you used Doldy, what settings? If 448
and 7.5 probably issues for somee players wwill show
up)
I left the Dolby settings alone, so I guess that's 192. Is it safe to go higher? I'm re-encoding the video right now, at average 6.7, max of 8. I thought I'd try that (though it seems that isn't the issue).
I built the project first, and tested it with DVD
Player -- it worked fine. The folder conaining the
build assets shows as 7.62 GB. I then chose
"Format,"
chose the break point (it only gave me one
option),
chose "Lossless Linking", and left everything else
alone.
Was the larger number or smaalller number in Get Info
7.62?
This was in "Get Info". In the burn dialog, it was something like 8.19G. Quite a bit less than 8.4, in any case.
I clicked "Burn", and got the spinning beachball
for
about fifteen minutes, so I force quit DVDSP,
which
gave me my first coaster. Then I repeated the
process, got the spinning beachball, and left for
the
evening. When I came in this morning, I found the
DVD
ejected, and DVDSP giving the following error in
the
log:
Warning: The file ‘NOISESOFFDUALLAYER.layout’
found
in the VIDEO_TS or HVDVD_TS folder will not be
included in the final disc.
This is normal and to be expected
Good to know.
The recording device reported the illegal request:
No
more track reservations allowed. (0x72, 0x05.)
track reservations allowed. (0x72, 0x05.)
Looking at the error in general it is something
between the software and device, first try repairing
permissions, then try a new user to see what happens.
I'll try both of those.
There is also a chance the crash/stall maybe
corrupted some preferences. Do you have a copy of
Toast 6 or 7 around? Did you add after market RAM?
No Toast. Yes aftermarket RAM.
Do you have a DVD-5 Project to test/build to see if
it happens there? I have not had this particular
problem before, but these are some of the first
thhings I would test/do to troubleshoot.
I tried that, and the burn was successful. What does that mean? can I rule anything out? RAM?
I can't imagine it could be a firmware issue,
since
this computer arrived from Apple a week ago.
10.4.4 has had some issues for some people
Great. I'll try a few of these things. Is there a good RAM diagnostic out there?
G5 Dual 2GHz Mac OS X (10.4.4) PB 17" 1.5GHz

Similar Messages

Error Message on Windows Media Player 'ONE OR MORE ARGUEMENTS NOT ALLOWED'

THIS FEELS LIKE THE COMMERICAL ...
I'm trying to use Windows Media Player on my Mac Intel -- brand new.
I keep getting this error message -- no kidding!
"One or more arguements, not allowed"
Intel Mac Mini 1.66Mhz Mac OS X (10.4.9) 2gb RAM Installed

WMP for Mac has been discontinued and is not written for Intel Macs.
Instead you should use the free Flip4Mac QuickTime WM plugin available free from Flip4Mac.com
If you choose to stick with WMP, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups-beta.google.com/group/microsoft.public.mac.office> rather than an Apple forum.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

Disk Utility: Burn error: 0x80020022 The device failed to respond...

I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
Media: Philips DVD+R DL 8x
*Drive info:*
HL-DT-ST DVDRW GS21N:
Firmware Revision: SA15
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
DiscUtility.log:
2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
2009-10-03 08:55:15 -0600: Erase disc before burning: No
2009-10-03 08:55:15 -0600: Leave disc appendable: No
2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
2009-10-03 08:55:15 -0600: Eject disc after burning
2009-10-03 08:55:15 -0600:
2009-10-03 08:55:15 -0600: Preparing data for burn
2009-10-03 08:56:30 -0600: Opening session
2009-10-03 08:56:35 -0600: Opening track
2009-10-03 08:56:35 -0600: Writing track
2009-10-03 09:01:37 -0600: Finishing burn
2009-10-03 09:02:37 -0600: Closing session
2009-10-03 09:02:38 -0600: Finishing burn
2009-10-03 09:38:37 -0600: Burn failed
2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
DiscRecording.log:
Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
Disk Utility: Burn sense: 4/44/90 Hardware Error,
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Message was edited by: Weasel42

I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
Communication to the disk drive failed: 0x8002022
And disk utility fails with a "Invalid B-tree node size" error
Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

Issue qty is more tahn reservation qty

Reservation has been created for 100 Nos.
While doing Goods issue with ref to reservation. system is allowing to Post more than 100 Nos (That is more than reserved quanties)
How to keep a check in this

Hi,
Go to OMCQ and convert message 'M7 362' to 'E' to error. I think this will solve your problem
Regards,
Vikas Mayekar

DVD Burn Errors

I have an older PB15 with a UJ-816 burner, 2x max read and write. In the last 2 years, I've burned about 500 disks with variable results.
Most of them have been TDK. These usually work fine except that on some spindles I get errors and have to burn at 1X.
Apple disks always work fine.
I bought some Memorex 8X disks at Frys ($10/25 disks) and these have been giving me fits.
Disk Utility: Burn sense: 4/03/01 Hardware Error, No write current
Disk Utility: Burn sense: 4/03/00 Hardware Error, Peripheral device write fault
Disk Utility: Discrepancy in block 2188832 at byte 0.
Disk Utility: Source data: 5A1A 6700 1C11 03B5 42F6 C000 0000 0000
Disk Utility: Burned data: DD29 835A 05A2 9795 3C1C 0F60 0295 2E7E
Disk Utility: Burn sense: 3/73/03 Medium Error, Power calibration area error
Disk Utility: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
Disk Utility: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
I can't remember seeing this collection of errors on other media. What is even odder is that these won't work at 1X at all, I have to try at 2X to get any good results at all. Perhaps 1/3 of the burns fail even at 2X. The last 4 burns in a row have failed.
I've gone through a bunch of the really cheap Fry's "Great Quality" media with no errors at all.
Is Memorex known to be a bad brand?
- gws

I have heard that 2x speed is somewhat "problematic" than other burn rates... and that you have to buy a media that specificaly mentions burning at 2x (I think in reality it's like 2.4x? and that causes some weirdness), or else sometimes it will not work.
I read this somewhere. can't rememebr where. Try buying media where the label specifically mentions 2x and see if that helps (usually you'll have to find a media that is rated slower, which is getting harder to find..)
I use memorex a lot, and it's pretty reliable, at least on my drive, but that doesn't mean much since DVD-RWs are so finicky. (as good as other media I've used. TDK, Fuji, maxell, memorex). the only coasters I've made form memorex are user-induced. I've heard Apple uses Maxell.. you might want to look at their stuff. don't use GQ. I made more coasters using that brand than all others combined.

Burn error 4280-help toonz? anyone?

I'm getting so fed up with iTunes! I can't get any music onto cds. I am not buying any more from iTunes....but the problem is I still need to get the stuff I've purchased onto a cd...
I cleared up the old 2122 problem by getting a whole new burner....went from an APOEN to a LITE-ON....
now I've got ANOTHER burn failure....this is absolutely ridiculous..it can't all be me can it?
so...I've been getting the burn error 4280 on all burns...no exceptions. And yes, I've followed what everyone has been saying about updating drivers, BIOS etc...I've used different brands of media and it's DMA over PIo
anything else you can think of? here's my diagnostics....
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GTP_
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82945G Express Chipset Family\Intel(R) 82945G Express Chipset Family
IDE\DiskWDCWD3200JD-00KLB0____________________08.05J08, Bus Type ATA, Bus Address [1,0]
USBSTOR\DiskMitsumiVT6205-DevB____2.67, Bus Type USB
USBSTOR\DiskMitsumiVT6205-DevM____2.67, Bus Type USB
IDE\CdRomDVD16X_________________________________FTJ1___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomLITE-ONDVDRW_SHM-165H6S________________HS0D___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: LITE-ON DVDRW SHM-165H6S, Rev HS0D
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
E: DVD 16X, Rev FTJ1
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: LITE-ON DVDRW SHM-165H6S on CDR media at speed 16X.
Windows XP Pro
Windows XP Pro

http://docs.info.apple.com/article.html?artnum=300448-Heres a start.
This happens on certain PC's. I dont know if you care to know the ins and outs of why this sometimes happens, but here is why and how to fix it. an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
the thing to do to reclaim your optical drives is located in your registry here:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
You'll want to have that open, and a mini-window of the following:
START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal.
Let me know how it goes.
Good Luck,
Rachyl

Burning error 4000....again

So once again, I face the issue of burn error 4000. I was able to burn one cd tonight, then it decided that I was to burn no more. I tried running the "repair" function from the "Add/Remove Programs" in the control panal to no avail. Has anyone else had the problem of burn error 4000, and if so and you were able to fix it, how did you fix it? I would like to burn the songs I purchased recently since my mini's battery is being replaced and I don't have a way to back up those songs at the moment, unless I dump them onto my external hard drive....help!
~broadcasterchick

hiya!
You mean the one that Eme posted?
um ... i'm not sure. my monitoring of "Importing & Burning" is still kind of patchy ...
here's the most complete version of it (for burning). we start with the Apple advanced burning reference:
http://docs.info.apple.com/article.html?artnum=93286
... supplemented by background documentation and on updating drivers and firmware:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
... and then advice to check for more documentation and to submit CD diagnostics to Apple at their optical drives troubleshooting page:
http://www.apple.com/support/itunes/windows/cddiagnostics/
and especially when it's a 3000-4000-range error, i throw in the MS troubleshooting documents too:
http://support.microsoft.com/default.aspx?scid=kb;en-us;324129
http://support.microsoft.com/kb/314096/EN-US/
for good measure, here's the "drive reading" reference, too:
http://support.microsoft.com/kb/321641/
(at some stage, if i've got time, i want to go on a trawl through ilounge and ipod garage forums too to see if they've accumulated any additional wisdom on these sorts of errors.)
love, b

IDVD 5.0.1 mulitplexing/burning errors

Here goes, my factory installed combo drive broke, so I got a new CD/DVD Burner : (company installed)
Manufacturer:     _NEC
Model:     _NEC DVD_RW ND-1300A
Revision:     1.05
Drive Type:     CD-RW/DVD-RW
Disc Burning:     Vendor Supported
My iDVD 3 worked once, then would not work, it wouldn't open properly and had to force quit every time.
I asked our IT dept to re-install it. They couldn't find the software re-install disc. Sooo they got out the iLife disc and installed iLife with iDVD 5.0.1.
It won't work either.
When I try to burn a DVD, it proceeds like it is encoding, then at the end, it gives me an error message; Errors in Burning Process. I hit ok then it says: Multiplex Error, problem during multiplexing/burning. I am left with a blank DVD and lots of frustration.
I try to bring up old DVD projects I've previously made with iDVD 3, but it keeps trying to find files that it cannot find. Even though I have all the files saved.
I have Quicktime 7.0 that I installed a while ago and iDVD 3 did fine with those exported files.
I have FCP HD 4.5, I usually export as a Quicktime file, same as source, creating new media (stand alone file). Never had a problem before with iDVD 3 and my old combo drive.
I have Mac OS X (10.3.9). I have 40 Gb available on my start up drive (Mac HD).
As I said before, I sucessfully burned one or 2 discs before iDVD 3 started acting up on me and led me to install iDVD 5.0.1.
Here's my console report from today's attempt:
Contents:     Mac OS X Version 10.3.9 (Build 7W98)
2005-10-21 10:13:17 -0700
iDVD: Burn started, Fri Oct 21 10:39:55 2005
iDVD: Burning to DVD-R media with DAO strategy in _NEC DVD_RW ND-1300A 1.05 via ATAPI.
iDVD: Requested DVD burn speed was 2x, actual burn speed is 1x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Burn failed, Fri Oct 21 10:39:56 2005
iDVD: Burn sense: 5/30/05 Illegal Request, Cannot write medium, incompatible format
iDVD: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
I've read some of the threads on this problem already, with no luck so far.
Any suggestions appreciated.
Thanks,
JBT

I am having a similar problem burning via IDVD 4. However, in my case the Superdrive in the installed original on a year old PowerMac G5. This is the second of two similar FCE projects each 90min. The first burned fine but the second one gets to stage 4 and stalls. The striped progress bar moves but the burning never takes place even after hours. Hitting the cancel button has occasionally given the message "errors were found during the burning process. Logical end-of-file reached during read operation".
I have tried the follwing remedies without success:
1) taping the video back to the camcorder and reimporting it into IMovie. It looked fine even in the IDVD preview but would not burn
2) I did an archive and install of the OS including the ILife apps
Even more perplexing is the fact that a short segment of the project in question burned just fine did a two hour long video saved as a disc image.
I would greatly appreciate any assistance. Thanks, Jay

BEx: Too many calculations in a formula (). No more than 2000 allowed

Hi Experts,
I am into this really huge BEx report with 150+ rows and 10 columns. I have written enormous amounts of formulas as well as selections inside cells. Now while generating the report in RSRT (taking the technical information) I am receiving this particular error.
Too many calculations in a formula (). No more than 2000 allowed.
Message no. BRAIN538
Now my doubt is, will it be ok if i simply reduce the number of formulas being used? Or is the error message talkign about the number of variables used in all formulas together? Please suggest.
Regards,
Arun.

Hi,
The note 1394944 doesn't solve the issue, but it gives information on what actually happened. In my case the said note was already available in the BI version. The issue was that BEx allow only a maximum of 2000 variables in formulas in a query. So I had to restructure the whole query.
Regards,
Arun.

Dvd burn error--need help with error message

Ok so I have read all the support articles and many of the discussions already posted...but still can not burn a dvd.
so, I created a project on idvd, it just has two slideshows that I imported from iphoto. I could not burn the dvd directly from idvd, got the multiplexing/burn error message. I successfully created a disk image and was able to play it on my computer using the dvd player, I then tried to burn it using the disk utility and again got an error message after it started the writing proccess...the error said "The devise failed to calibrate the laser power level for this media" Does anyone know what this means??? I have lots of room on my hard drive and am using DVD-R sony dvds. Any help would be greatly appreciated!!!

Hi Becca:
Just click on the little  in the upper left-hand corner, click ' About this Mac', More Info..and open your System Profiler. Under ATA you should se something like this:
MATSHITA DVD-R UJ-825:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-825
Revision: DBN7
Serial Number:
---> Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
That will tell you.
Sue

Error: No more virtual tiles can be allocated

Hello all
When using the following filters in Photoshop CS6 all updated installed:
Adaptive Wide Angle
Lens Correction
I get the following error:
No more virtual tiles can be allocated.
I have 8 GB of RAM and 100 GB free on my only partition and a GeForce 880 FX graphics card.
For this test I am using a small 2 MB 1000x500 px jpeg image. But I tried with a lot of different images.
I already deleted the Photoshop settings and played around with the performance settings.
Any tips?
Thank you alot!

Thank you!
I am running Windows 8 with the latest updates and Photoshop CS6 with the lates updated aswell. Precice system specs you will find below.
I closed all foreground and background programs and had only photoshop open.
Also I played around with the performance settings in Photoshop, also disabling GPU acceleration, without any success.
Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130306-1502)
Processor: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz (8 CPUs), ~1.7GHz
Memory: 8192MB RAM
Page File: 3318MB used, 12996MB available
Card name: NVIDIA Quadro FX 880M
Display Memory: 4562 MB
Dedicated Memory: 978 MB
Shared Memory: 3583 MB
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1729 MHz
Built-in memory: 8124 MB
Free memory: 5337 MB
Memory available to Photoshop: 7149 MB
Memory used by Photoshop: 63 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro FX 880M/PCIe/SSE2

Write Protection Error when Uploading track list to IPod 4G

Hi,
When I upload tracks to my Ipod playlist from the library I get a message
saying that the device is protected and unable to sync even though it has
been able to transfer 1 or 2 tracks. I then have to close down Itunes (without
ejecting the ipod) then re open Itunes and then I am able to transfer some more
tracks and some times all remaining tracks can be transfered with out a problem,
until I import another CD then all starts over again.
Does any one have a solution to this?
Thanks
Lord Arioch

If anyone could help me overcome this error it would greatly be appreciated. Java questions here concern programming, not product support.
Connection reset by peer: socket write errorThat says that the server, where the file comes from, closed the connection.
The most likely possibilities
1. The client software is not correctly communicating with the server. Solution: fix the client
2. The server is not correctly handling this request. Solution: fix the server
3. The server doesn't want to talk the the client. Solution: fix both the server and the client.
From the above unless you are in a position to fix something then you do not have an option.
If you yourself cannot fix either of those then this is a vendor problem and you must contact the vendor (creator) of the software client and/or server. You would do that somewhere besides this site.

IDVD keeps reporting Burn Error #-1

Ok, I've checked previous posts regarding Burn errors, only found one relating to error 1 which said it was due to audio overrun on the movie.
My question is how does this occur when the movie and audio are imported together? The audio has not been extracted and the end of the film has been edited out. (Split video at current frame, and move excess not required out of the timeline)
This has been ongoing now for three weeks. This is what I have done:
1. Imported hi-8 90 min movie from camera thru Canopus ADVC55 into iMovie. (First time this was done got one clip, second time got two clips but first was over 60min, last time I restricted import to max 50min clips). Project is located on my external WD MyDisc reformatted for HFS. Cleared 50Gb of free space from Macintosh startup drive.
2. Added clips to timeline. Saved three frames as JPEG's to use in iDVD menu. No chapter markers, transitions etc. just the raw movie. Saved iMovie project
3. In iDVD created a new project (on Wd drive same directory as iMovie project) set the theme to Scrapbook (V5.0 theme) edited the drop zone to add the JPEGS saved earlier
4. Added the movie file from the Media page and dragged the movie onto the menu.
5. Edited the title on the menu.
6. Save iDVD project
7. Save as Disk Image on WD external drive (same directory as iDVD project)
8 Encodes for 3 hours and comes up with error, haven't managed to catch the change from Encoding movie to encoding audio to see if it gets past this.
9. Repeated exercise using 5 min movie. This worked fine.
10. Trashed iDVD preferences - no effect
11. Trashed iMovie, iDVD and Quicktime - reloaded iMovie and iDVD from installation disks and downloaded Quicktime. Rebooted - no effect.
12. Shut down and reconfigured my set-up. WD HDD was at end of Firewire chain
MAC->USB Hub (2 FW)->Iomega HDD->Lacie d2 DVD writer->WD HDD
to
MAC->USB Hub->Iomega HDD->WD HDD
anything else i can try?

Hi
a. Yes it most often was related to stray audio fragments outside movie duration
but it is a general error so there might be many more origins
b. USB-hubb FW (FireWire connections) Sounds strange to me but might fall back to my ignorance.
I would try to keep as few item connected as possibly and stay away from any form
of Daisy Chaining.
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Yours Bengt W

I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
(123935)

Please help! ReferenceError: Error #1065: Variable tracker is not defined.

Hi guys im tearing my hair out over this, sorry if its an extreme noob question but i know its quite a common problem and im sure someone on here must be able to help.
After debugging my project here is the error message -
ReferenceError: Error #1065: Variable tracker is not defined.
          at CustomsConnect/buttonClick()[C:\Users\LiamT\Desktop\plz\CustomsConnect\CustomsConnect.as: 443]
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at shell::Button/buttonClick()[C:\Users\LiamT\Desktop\plz\CustomsConnect\shell\Button.as:47]
Please let me know if you can point me in the right direction here - the problem has come about as I have inherited a .fla that has been set up on another machine. If you need me to post any of the code that its referring to above let me know.
Thanks in advance for any help that you can offer me.

CustomsConnect is the designated document class.    Tracker is relating to my google analytics tracker as far as I can see it is already defined and perhaps this line of code could be something to do with the problem
Line 77:   private var tracker: GATracker;
Do you want me to post up the rest of the code?
thankyou so much Ned for taking the time out to help me with this.
Many thanks
Liam

Burning Error: "No more track reservations allowed"

Similar Messages

Maybe you are looking for