"Burning finished. Errors detected during burning".
I have been trying to burn in iDVD 5 without luck. I keep getting the message in the subject line "Burning finished ..." after it has encoded all the media.
the project seems to encode/compress the data, but then not physically burn the media.
It was working fine until iDVD crashed on me one time -- since then, I have not been able to successfully burn.
Any ideas? Many thanks in advance. I am using all the latest software.
Long live the sunflower iMac G4, iBook G4 Mac OS X (10.4)
sometimes idvd errors occur because of a corrupted file. I had everything go smooth...video encoded good but then it froze up after trying to encode the audio...I went back into my project and deleted the "added" music [ wedding video] and tried music that I knew worked before....voila! It was corrupted music file[s]...I found that sometimes my clients will give me a CD with their music on it it and it will not work in idvd even though it worked fine in imovie!
Similar Messages
-
ODI-23049: Error Detected during Repository Installation
Hi All
I installed ODI 11.1.1.6.0 on W7(x64).
http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
(for all platforms)
I created user odim
on Oracle server : Personal Oracle 11g (11.2.0.1.0)
(where I have ALL rights)
grant DBA to ODIM with admin option;
Trying to create Master repository from ODI Studio got :
ODI-23049: Error Detected during Repository Installation
:Error while updating Schema Version Registry Entry for ODI.
Check if user odi has DBA permissions.
Test connection on 1-st page
jdbc:oracle:thin:@EVBYMINSD0799:1521:TRAF
works OK.
Any ideas welcomeDBA User: The database administrator's username
DBA Password: This user's password
I use user ODIM (ODI) for both user and DBA
( tried SYS - but it fails with standart message : you should connect as SYSDBA - because there is no uch option in interface )
I use user ODIM 2 times
Is it correct ? -
Error detected during paging operation
My computer is freezing on a regular basis and I get the repeated Event ID: 51 message 'An error was detected on device \Device\Harddisk0\D during a paging operation.' in the system log.
The hard drive is a new Maxtor DiamondMax 10 SATA.
I've been to the Maxtor site and it says 'These errors are not caused by the external storage device. The error may be related to problems in either the USB / ATA / SCSI / 1394 controller sub system or another storage device.'
Does this mean there is a fault with the motherboard?
The motherboard is an K8T Neo2 Series (MS-6702E).Quote from: mcihael on 13-June-05, 03:50:14
Hi,
it may help if you'd disable USB legacy supprt in BIOS. I have had similar issues with my Firewire-HDD. The BIOS setting mentioned before fixed that apparently.
Michael
Thanks I will give that a try.
I'm still getting the same problem.
I have upgraded the PSU to a 450W and changed the memory configuration from dual-channel (using DIMM1 & DIMM3) to the ordinary configuration (using DIMM1 & DIMM2).
Neither of these measures has worked.
I am using two Crucial CT6464Z40B 512MB PC3200 memory modules that according to Crucial should be 100% compatible with the board. -
32 errors detected during ACT_700. in SRM Upgrade
Hi Experts
I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
JigneshHi Experts
I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
Jignesh -
Error Detected during Installtion
Hi ,
I have to create Master Repository using Oracle 11g database.
I have entered all the DATABASE CONNECTION details and Test the connection like :
Message was edited by: 952939Duplicate of post
https://forums.oracle.com/thread/2548493 -
"Errors Found During Burning Process"
Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
NeilColleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks! -
Burning Finished- Error #-34506
i created movie in imovie, then went to idvd, after about a hour or more of encoding and burning the error message popped up
"Burning Finished" errors were found during the burning process.
the error #-34506 was reported.
i spent a day making this imovie then a slide show in idvd.
any ideas on how to fix this?
thank youi created movie in imovie, then went to idvd, after
about a hour or more of encoding and burning the
error message popped up
"Burning Finished" errors were found during the
burning process.
the error #-34506 was reported.
i spent a day making this imovie then a slide show in
idvd.
any ideas on how to fix this?
thank you
Hi I had this problem as well. It caused a lot of frustrations especially as I was showing off the ease of my mac to a pc freak!!!
The solution I found (on an earlier discussion was to change the preferences from best quality to best performance ... it worked really well. -
ok launched idvd and imported my imovie. and click burn and get this message
"burning finished - errors were found during the burning process"
any idea? jammed to get the movie together for an event and now i'm stuck.Aloha and Welcome to discussions.
Boy, could be lots of things actually...
I would start by deleting the encoded asset ( Look under "Advanced" in the menu bar).
Plus, be sure to follow the chapter rules:
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
Check your JPEG filenames and folder names. Don't use any special characters. Be sure to use only letters, numbers, and underscores, and only one "." Do not use "/" or "." at the beginning of a file name.
Another thought is about the music you used. Is it from the iTunes Store? You may need to burn a CD of the music and import from that.
If you used photos, your iPhoto Library may be corrupt. You could try rebuilding the library or try dragging the photos to the desktop and then into iDVD.
BTW-next time try saving the iDVD project as a "disk image" and use the disk utility or a program like Toast to burn the DVD.
Aren't using an external burner are you?
:)Sue -
"Errors found during the burning process"
Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
LarryLarry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b -
ERRORS found during the burning process #-34506...any idea what this means?
ERRORS found during the burning process #-34506...any idea what this means?
This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
thanks in advance
JeremiahFirst I'd be certain that I had changed the preferences from best quality to best performance.
Did you follow the chapter rules?
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
You may have already done this, but
Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
:)Sue -
Error found during burning process
I am having a problem burning my iDVD project to disk. I'm using DVD-R disks. The message I get is "Errors found during burning process". The burning process seems to work correctly all the way through until it gets to the last step - "burning".
There are lots of things that can cause problems burning to disk.
I suggest that you save your project as a disk image (an option on the iDVD file menu) and see if that is successful. If it is successful, that would eliminate issues related to iDVD, encoding, and source material. After that, I would look to what brand of DVD you are using (Verbatim, Sony, Fuji, and Hp are oft recommended here), what burn speed (4x or lower is best), whether all iLife programs are up to date, whether you have any 3rd party or Quicktime plug-ins that might be interfering, whether you have sufficient hard disk space to burn (20 Gb is recommended, although 5GB would be absolute minimum). -
Error messages during burning DVD audio
When burning a musical DVD audio 96/24 in Toast imported from an i Tunes playlist I get the message:" file VTS-06 etc inaccessable .
Data Fork -39 , plus a Mac system error. Mostly the error occurs during burning , sometimes during simulation but this happens rarely.
Can someone tell me where the problem is. many thanksHere's what the Help Menu offers:
Exporting a movie to iDVD
Once your movie is ready for viewing, iMovie HD can automatically export it to an iDVD project that you can burn on a DVD. You can then view your DVD on a television using a DVD player or on your computer screen using the Apple DVD Player.
Note: Before you export your movie to iDVD, you can add chapter markers to it so that viewers can quickly review different sections of the movie on DVD. If you've added chapter markers, they are exported with your movie, and you can use them to add scene selection menus to your iDVD project.
Not all computers support iDVD. See your computer's manual to find out if your computer does.
To export your movie to iDVD:
Choose Share > iDVD.
Click the "Share selected clips only" checkbox if you only want to share clips you selected.
Click Share.
iDVD opens and your movie appears in a new project in iDVD.
For more information about using iDVD, choose Help > iDVD Help when iDVD is open.
After you have addressed the above then follow this:
http://docs.info.apple.com/article.html?artnum=93006
other informative links include:
http://discussions.apple.com/thread.jspa?messageID=4771939�
http://www.digitalfaq.com/media/dvdmedia.htm
Good luck! -
I keep getting an error message during step 5 of 7 in syncing process, which tells me I have to enter my password, so I do, but it can't finish syncing. Help!!
What EXACTLY does the message say?
-
Error on reader detection during fulfillment
I am getting this error message during the reader detection:
Incorrect use of detect mechanism - Return URL not supplied
I know there is a return URL because I traced the ASP code. I have Adode Reader 6.0.1.
TIA,
Rollyhttp://10.8.9.71/fulfill/ebx.etd?action=enterloan&ordersource=EBOOKLIB&handoff=true&orderi d=TEST577734162&custid=ROLLYF&bookid=ISBN%3A0987654321&price=0&gbauthdate=6%2F23%2F2004+1% 3A04+UTC&dateval=1087952696&gblver=3&auth=c42c2378ef35b7013b94506a6d8d0466557b0bf7
What is wrong with the above URL to cause the "Incorrect use of detect mechanism - return URL not required." ?
TIA,
Rolly -
Could not commit transaction Error 1 Detected During Transaction G/L Account
hi experts
when i was adding Sales Order i am getting an error as Could not commit transaction Error 1 Detected During Transaction G/L AccountHi,
Plz find the following threads:
Transaction failure with error message \"Error -1 detected during transaction\" when update the G\\L Account D…
"Could not commit transaction: Error -1 detected during transaction"
Could not commit transaction: Error -1 detected during transaction 'Payment Methods for Payment Wizard' (OPYM)
Could not commit transaction when inserting new items
Maybe you are looking for
-
Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now i
-
How to measure the number of pixels involved in a selected area of a digital photo?
Hi everyone. I want to determine the number of pixels in an object that is part of a digital photo. I use cameras to film chunks of ice breaking away from ice cliffs or tidewater glaciers. I want to know the size of the ice chunk that my digital phot
-
CREATE TABLE COUNTRIES(CID INT,CNAME VARCHAR(100)) INSERT INTO COUNTRIES VALUES(1,'AUSTRALIA') INSERT INTO COUNTRIES VALUES(2,'INDIA') INSERT INTO COUNTRIES VALUES(3,'FRANCE') INSERT INTO COUNTRIES VALUES(4,'BERLIN') SELECT * FROM COUNTRIES o/p CID C
-
How to insert HTML5 rollover buttons into Dreamweaver
i publish an HTML5 canvas out of Flash contaning a rollover button and now I want to insert it into my site in Dreamweaver, how do i do it?
-
Can we update The extended VBPA database table using BAPI
Hi, We have a table VBPA appended with two fields start date and end date. Our scenario is to when modifying the sales order using the bapi BAPI_SALESORDER_CHANGE we need to update the two fields star_date and end_date of VBPA table for the corresp