Burning from disc image: do I mount it first or not?

I'm sure this is a dumb question, but I don't want to waste my few remaining Apple DVDs testing the two options. I made my home movie into a disc image because I needed to use the professional setting to make a longish movie fit on a single-layer disc. So now I want to burn it. iDVD '08 says to do this from within Disk Utility. But nowhere can I find out whether or not I need to mount the disk and burn the mounted disk so that just the audio_ts and video_ts folders are on the DVD or whether I should burn the file that ends in .img directly to the DVD instead. I'm confused. If somebody could just walk me through the steps, I'd very much appreciate it. Please assume total ignorance.
Many thanks for any help,
WA

The resulting disk should play in my parents' DVD player?
Just a suggestion...... You can take it or leave it (your choice).
If I were burning an image or making a Dvd copy for my in-laws to play on their Sony set top dvd player as opposed to a mac, I wouldn't use the Finder nor apple's disc utility (not that either approach won't work .... most of the time it will).
It's just that I get slightly better (if not more predictable) results with Roxio Toast to burn the image to Dvd-R while lowering the burn speed to 4x or lower and using quality media like Verbatim or Maxell.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Similar Messages

Burning from disc image

Trying to replicate a DVD for which I no longer have the iMovie files - successfully created a 3.44Gb .dmg file, BUT when trying to burn from this, I get "buffer underrun" messages. There is >17 Gb free space on the hard drive. Also, I am unable to copy the .dmg file to an external drive with 18 Gb free space as after about 2Gb it fails with an error message that the drive is full. Something funny about that disc image file?

I am using Disc Utility as per those directions, and this has worked with no problems on similar DVDs.
I also suggest you get the free download Mac Sweeper which you will find on http://mac.softpedia.com/get/System-Utilities/Mac-Sweeper.shtml
Then:
1) Shut down/Restart without any applications running.
2) Run Mac Sweeper carrying out all the optimize options including repair permissions and, under clean, empty caches.
3) Now do your disc copy with nothing else running.
Onyx will have the same functions as Mac Sweeper. This is a bit of an overkill but it will give your system every chance of a trouble free burn.

Burning DVD from disc image

I've been burning DVD's from disc images using Encore 1.0 for some time now. ever since I upgraded to 2.0, Encore gives me error messages on my project like:
"first play not set" and
"remote control problem".
I don't see how these messages can appear when I'm using a disc image (i.e. a completed project) as the source. does anyone know?

When you click on the Build DVD button in the Disc panel, Encore does a quick check of errors
in the current project. If you have a new, empty project, you will at least get errors about First Play and Title Remote. Those errors have nothing to do with your disc image, they apply to the current project, from which you are trying to burn your disc image.
These errors may be safely ignored, since they don't have any effect on your disc image.
-Jeff

Burn error (disc image)

All of a sudden, iDVD 5.0.1 won't burn a disc image. Gets to some point through the process (might be half way, might be right through), then says, "Burning completed. Some errors were found during the burn process". Doesn't create any file at all. Have tried buring a few different projects, with the same result.
Any clues?

I am having exactly the same problem. My iDVD project started in iPhoto as a "saved slideshow". I have followed all of the steps as provided in two 3rd party manuals -- Jim Heid's "iLife '05" and David Pogue's "iMovie and iDVD 5 -- the Missing Manual". I have even done a "Project Archive" file as the basis to burn the iDVD to ensure that all the resources are together and available. My project consists of a 24 minute slideshow comprised of 230 photos all with "Burns Effect" panning and zooming and with a background music track. This was sent to iDVD from the iPhoto commands. The "Memories" theme was applied with text modification, changes to the font style text location and color, and changed audio selection. A second slideshow was added which consisted of an archive of all the photos used in the original, plus some added ones that were not used. This added a second button on the main menue with three sub-menues on a secondary menu, where the photos were automatically broken down by iDVD into three groups of photos of less than 100 each for a total playing time of approximately 6 minutes (1 sec per photo). The project was then saved and archived. Everything plays fine up to this point. The total memory of the saved archived project file is 2.86 Gb. The rendering and processing time for iDVD to create the disk image (.img) file exceeded 5 hours. I've tried to generate the disk image three times. Like Jim White, in one case after nearly 3 hours, the program put out an error message saying that errors had been encountered and the processing was being aborted. In the two other cases, the processing went the complete 5+ hours; gave a message that the "burning was finished, but that some errors had been found (on verification?) and produced NO FILE.
I am using a Mac G4/1.25 Ghz MDD , Mac OS-10.4.2 with 768Mb RAM and 13.5 Gb of available hard drive storage at the beginning of disk image processing; with iPhoto 5.0.4 and iDVD 5.0.1.
I have no experience with earlier versions of iDVD, so I can't say if this is a problem created by the 5.0.1 update, or the upgrade to Tiger. In any case, this is extremely poor error coding, especially considering the amount of time required for the image processing -- i.e.to state after 5 hours that an error was found which aborts or invalidates the burn without providing any clue as to what or where the error was -- this makes the entire software package of virtually NO VALUE.
Your comments, please!

Lose audio when burning to disc image.

Hey guys. I am losing my audio half way through my project when I play it on a dvd. My audio is there after I export to quicktime, but when I create the disc image through iDVD and burn through Roxio toast my audio is only there toward the first part of my project. The video portion is fine though. Any thoughts on this would be great .
Thanks,
D.T.

Burning a disc image and copying it to disc is the recommended workflow around here -- it is one more action that you have to initiate, but it provides greater control (set the burn speed down to 1x or 2x) and it is less demanding on your computer (fewer errors?).
Re the audio -- if the music was purchased from iTunes, you may be caught up in a problem that should have been resolved in iLife06. There's a workaround (burning a CD from iTunes and re-importing) but provide some more details on the audio.
John

No imports while burning a disc image

While I am burning a disc image in iDVD I am trying to import a movie to iMovie through a DV box. While the disc image is burning, iMovie will not pick up the box, or any imports. When its done burning, iMovie goes back to detecting the box. Anyone know what this is???

I'm curious... What happens if you start the download first, before you start burning the DVD?

Movie clips in iDVD won't burn to disc image or a DVD

I created an iDVD project with a slide show created in iPhoto and some movie clips I took with a digital camera that were also in iPhoto. It works great in iDVD preview. When I burn a disc image or a DVD, the movie clips don't play while the slideshow is fine. There is also the clue in the menu of the project (only on the disc image or DVD, not the iDVD preview) that the printing of the names of the movie clips is clearly lighter than the name of the slideshow. During the burning to disc or DVD, one can see the movie clips supposedly being encoded and no error messages occur. This is a birthday present. Help, please.

It's become a moot point. It turns out that while I could navigate with the mouse with respect to the slide show (on both the disc image and the DVD I burned), I had to use the arrows and enter key to navigate and activate the movie clips. Once I figured out to use the arrow keys/enter key rather than the mouse, everything worked okay. Thanks for trying to help me!

How to convert MP4 movie to dvd burn ready disc image?

I have a 15 minute MP4 movie (640x480, non-copy protected) that I'd like to save as a dvd burn-ready disc image. (This was a photo slideshow that a friend made into a movie on OneTrue Media. I don't want to add anything else to it, no chapters, additional files etc -- just save as a disc image that can be posted on my idisk public site for a few friends to download and burn to dvd if they wish). How can I do this the easiest way with iDVD?

Welcome to the forums.
You're almost there. Pull the video into iDVD (mp4 isn't the best format for DVD conversion but it should work) and use the Save As Disc Image command to create your image file (set preferences to Best Performance first).
John

I'm trying to print out a credit card statement from my iPad, it only prints the first page not 4pages, please help

I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help

I read your first post when I was posing a separate question on the Mac Pro board. I now see that we may be talking about printing from an iPad with Airprint instead!!!!! I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice. I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot. Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf?

Finder crashes when trying to open disc mounted from disc image

I downloaded a disc image of an application I need to install (Verizon Access Manager). Image downloads fine and when I double click it, it mounts the applicaiton disc. But if I try to open the application disc, it crashes the Finder.
I checked both the disc image and the disc it created with Disk Utility and they both come back clean.
Not sure what to do.

Might open Activity Monitor in Utilities & see if you can force Quit/Restart Finder there, but might try this...
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if Finder & Search work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.dock.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that doesn't work my next guess would be maybe Spotlight is messed up.

Making Playable DVD From Disc Image

A friend of mine has an iDVD project but his mac cannot burn dvds. So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn. It does not play as a dvd in a player or in frontrow on my mac. When I double click on it the disc image is on the dvd. Did I make a data dvd instead? How do I make a playable dvd from a disc image?
Also, is going the disc image route the easiest way to transfer an iMovie or iDVD project to another mac. I did it this way because my mac does not have some of the music or photos on it that are linked to the project file. In Garage Band you can save as archive when transferring a file to another mac and it saves all the loops, etc in the file. There must be something similar in iDVD.
Thanks in advance for any help.
Paul

So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn.
Paul,
Video DVDs are written in the UDF format. That's why you must use Apple's Disk Utility to burn a disk image to writable media correctly.
In burning from the Finder, you have created a data DVD in Mac OS Extended format that will NOT play in set-top DVD players (as you have found out).
F Shippey

How do I burn a disc image (img file) to dvd?

I created a disc image from iDVD, but my disc drive on my home computer is broken. With a flash drive, I copied the img file onto my work computer & burned the file to disc. However, while the file copied, the disc doesn't play as normal dvd. What am I doing wrong? Thanks.

Though the replies above were very helpful and most likely would have worked, my work computer doesn't allow access to Disc Utilities. However, I bugged my IT guy and he showed me another way, using the Burn Application. I just needed to use the correct setting, as was mentioned above, I was burning data & not DVD. I'm sorry I don't have it in front of me, but I think I had to click the DVD tab & then select DVD/Video from the drop-down menu. One quirky element: I wasn't able to drag/drop the img file into Burn. I needed to drop the contents of the img file (the VIDEO_TS folder). Then it worked fine.
Message was edited by: Unca Bip
Message was edited by: Unca Bip

Problems Restoring From Disc Image

Hello Support Community
I'm attempting to replace a suspected failing HD on my G5. I made a disc image of the suspected drive in disc untility, and have it on an external drive. I purchased a 500GB WD Cavier Black HD for my new drive. I removed the old drive, and put the new one in. I noticed on the old drive that there was a jumper installed all the way to the right when the drive is installed in the machine. I tried restoring with the jumper installed, and without. I had better luck with the jumper installed. I got an error that said device does not support this action when I tried to restore to the new drive without the jumper installed. Now, without the jumper installed, when I go to restore from my disc image, I get a Restore Failure error saying "An error (2) occurred while copying. (No such file or directory)" Once I click ok, and try it again, I now get a message that says "An error (16) occurred while copying. (Resource Busy)"
Any ideas what my problem would be at this point? It seems as though my .dmg is functioning just fine. It mounts, and looks to have all contents of my old boot drive. The new drive is able to be formatted just fine. Did I buy the wrong tupe of drive? Is it too new?
Any help would be greatly appreciated.
Thanks
Dave

Hello,
I think you might need a Jumper on pins 5&6 to slow the drive to G5 SATA 1 speeds...
http://wdc.com/wdproducts/library/other/2579-001037.pdf

Having problems burning/creating disc image in iDVD 6

I am currently experience new problems trying to burn or create a disc image in iDVD 6. I have successfully burned iDVD projects in the past with the same computer/iDVD 6. The iDVD project looks like it is processing normally, even creates a labled disc image- but when you click on it, it reads "My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
My older son just got Toast 7 Titanium for me, so I have that resource. I also just bought extra memory to bring me up to 1.25 GB, and an external hard drive with 320 GB. I have a younger son and a friend who will need me to make a dance audition DVD for a CA college dance department that must be in So Cal by 1-19-07, so you can imagine I'm getting a bit nervous about this. I have verified permissions, reinstalled iDVD from the original, and re-done the original iMovie/iDVD project that first caused the problems- a 12.8 GB project (but have not re-done things since I got more memory on my computer). I don't know how big the audition DVD's will be, but estimate they won't be that big (hopefully), but will consist of many short clips/chapter headings. I know just enough about computers to know what I don't know, so would really, really appreciate some basic help!

My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
I don't know what you expect. You're looking for a problem where there isn't one.
The AUDIO_TS folder SHOULD be empty and (unless you've installed spercial software) you WON'T have any application to open the VIDEO_TS.VOB.
If you want to play the disk image, open Apple's DVD player application and then use it to open the VIDEO_TS folder.
This Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006 is how you burn the disk image you have to writable media.

Getting medium write error on burning a disc image using Disk utility

Have a MacBrook Pro 15 inch, circa Summer 2007, using OX 10.4.11. up until recently (as in before February) have been able to burn DVD's using Toast (message Medium Writer Error). Started getting problems where the burn failed. Thought maybe it was Toast, so I tried creating an iDVD project and tried to burn the DVD using that, and it stopped in the middle as well and then spit the disk out with no error message.
, this time I tried creating a disc image, and used disk utility to burn. The process looked like it was going to work but then failed with a message that I have a medium write error.
I have no problems burning a regular data disk on my superdrive so I am thinking it's maybe a software glitch rather than hardware. . Any thoughts, as to what could be causing this problem all of a sudden. By the way, there are other users out there, who seems to be having DVD burning problems all of a sudden, but most people suggest other media. I am using the same stack of DVD-R's from before when I had no problem.

Well, I had assumed my media was ok, since I had a spindle of DVD-R's and had used many of them successfully (until now!, ha ha).
I went out this afternoon and bought another brand (Memorex) and it successfully recorded.
So hopefully this solves my problem, I had no idea it was the media since I had used several of them before.
Thanks for your help.

Burning from disc image: do I mount it first or not?

Similar Messages

Maybe you are looking for