Burning iDVD projects with external LaCie burner

I recently purchased a LaCie DL d2 DVD RW with LightScribe 16x from LaCie (12/07/2007). The primary reason for my purchase was that I wished to create/burn iDVD projects on my iMac computer. The reason that I needed this product was due to the fact that, when I purchased my iMac, I made an error and ordered the iMac with a combo rather than SuperDrive. So, while I am able to create iDVD projects and iMovies, I am unable to burn DVDs with my project.
Thus far, however, I have not been able to burn a DVD with any of my products. When I attempt a “burn” the Creating your DVD menu appears and when I put in a blank DVD+RW 4x 4/7GB, it goes through the process (Prepare,,, Process Menus... Process Slideshows... Process Movies and Burn procedures). The DVD is then ejected and a message says its done and is “cleaning up.” However, that message never leaves the screen and when I click on the “Cancel” button, nothing happens. The iDVD application seems to lock up and I have to do a “force quit.”
I have tried this with three different project, all with the same result. When I place the supposed “burn” DVD in the Combo Drive, it spins for a while and kicks the DVD out.
I have also tried launching Toast Titanium (software that came with the LaCie burner). However, I see no place where I can “drag & drop” a iDVD product to the “drop zone.’
Can you help me out. Should I be able to burn iDVD projects with this unit? If so, what am I doing wrong.
Thanks for any help that you can provide.
Jeff White

"Should I be able to burn iDVD projects with _*this unit?*_"
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
Have you contacted LaCie Support?

Similar Messages

New - Burning iDVD projects using External Lacie Drive

My current eMac only has DVD-R capable drive and I a Lacie Firewire DVD External Drive with ability to burn DVD Double Layer.
Question how do I get iDVD to use external drive instead of internal drive to burn iDVD Projects?
Current option I can come up with is to save projects as a finished DIsc Image and then burn finished project with the Lacie.
Open to any help...
Thanks

Hello Cseijisan,
does your burner show correctly in System Profiler? If so iDVD should recognize it.
When you hit burn, iDVD should give you a little drop-down menu where you can choose your burner.
Current option I can come up with is to save projects as a finished DIsc Image and then burn finished project with the Lacie.
That is in any case a recommended procedure. Not only can you preview your DVD that way before actually burning, but it also helps eliminating burn errors, which might result from iDVDs inability to let you control the burn speed. Disk Utility or Toast are much more reliable burn apps.
hope this helps
mish

Problem burning iDVD projects using external LaCie burner

I recently purchased a LaCie DL d2 DVD RW with LightScribe 16x from the LaCie company (12/07/2007). The LaCie burner is connnected via Firewire to my iMac. The iMac is a little over a year old and I am running Mac OS X (ver. 10.4.11).
The primary reason for my purchase was that I wished to create/burn iDVD projects on my iMac computer. The reason that I needed this product was due to the fact that, when I purchased my iMac, I made an error in judgement , and ordered it with a combo rather than a SuperDrive. So, while I am able to create iDVD projects and iMovies, I am unable to burn DVDs with of projects on the Combo Drive that came with the computer.
Thus far, however, I have not been able to burn a DVD with any of my iDVD projects. I am running iDVD 6 (ver. 6.04). When I attempt to “burn” a DVD disk the “Creating your DVD menu” appears. When I put in a blank DVD+RW 4x 4/7GB, it appears to go through the process (Prepare,,, Process Menus... Process Slideshows... Process Movies and Burn procedures). The DVD is then ejected and a message says that it is done and is “cleaning up.” However, that message never leaves the screen and when I click on the “Cancel” button, nothing happens. The iDVD application seems to lock up and I have to do a “force quit.”
I have tried this with three different projects, all with the same result. When I place the supposed “burned” DVD in the Combo Drive, it spins for a while and then kicks the DVD diskn out.
I have also tried launching Toast Titanium 7 (software that came with the LaCie burner). However, I see no place where I can “drag & drop” an iDVD project to the “drop zone.’ The closest thing seams to be “movies.” However, when I select that mode and go to my iDVD folder, all of the files are “grayed out.”
Can anyone help me out? Should I be able to burn iDVD projects with this unit? If so, what am I doing wrong.
Thanks for any help/advice that anyone can provide.
Jeff White

open up Toast 7, click on Video tab, click on Image File and drag your img. file to Toast.
John,
That's not correct. In Toast 7 you must use the Copy tab to burn a disk image to writable media. See page 94 of the Toast 7 manual.
(The procedure is slightly different for Toast 6 and Toast 8 but always involves using 'Copy')

Idvd project with video and slideshow for dvd-rom file access

working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
17" Desktop G5 Mac OS X (10.4.2)

Steve,
It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
What is your exact workflow from PrPro, into Encore?
What brand of blank media are you burning the DVD to?
This ARTICLE will give you some tips.
Good luck, and let us know a bit more,
Hunt
PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

Error while deploying project with external variables

Hi,
We are facing issue to deploy a project which contains external variables. In the process of publishing, we check true - Smart Publish. In the deployment process I get a screen where we define the Deployment Topology. On clicking Deploy button, the next screen we get an error which says:
Error(s) found while creating external variables for the following engines: <Engine_Name>: Login failed for the user '<DB User>'.
The DB User and the databases are created by the ALBPM Configuration wizard while configuring. We are able to login to SQL using the same userId and also can access the tables in the database. Also, we use the same DB userId for the Engine Databse too.
We are using ALBPM Enterrpise 5.7 MP3
WebLogic 9.2
SQL Server 2005
If anyone has resolved such issue earlier, we need your urgent help.
Please suggest
Thanks and Regards
Jayant

Hi,
When you initially ran the wizard to create the Engine tables you used a user and password that had been granted CREATE table authority for Sql Server.
When you publish and deploy a project with External Variables (project variables in 6.0), you are adding columns to one of the Engine's tables. When you get the error you're getting, this normally means that the database user you specified has not been granted ALTER privileges for the database tables.
This should be pretty easy for your DBA to check out and fix. Once they do the GRANT, do the publish and deploy once again.
Hope this helps,
Dan

Any way to share idvd project with itunes?

hi everyone,
I needed to know if there is any way to share an idvd project with itunes, in the same way that you can an imovie project with chapters and themes etc and then ideally to play it on your ipod as you would on a dvd player, selecting chapters etc.
Would much appreciate any comments.

Well, there are two solutions to your problem:
- convert your movies to DVD. Advantages: better quality, menus, chapters.
- do the movies for iPod, but break them in smaller pieces, so you can jump to the next scene when needed. Advantage: smaller size, can be used on iPod.
Another possible solution is presented here: http://discussions.apple.com/thread.jspa?threadID=791841. I'm not sure it will work, and I'll appreciate if you will try and let us know the results (I don't have a video iPod myself).
later edit: Sorry, I was wrong: HandBrake CAN decrypt commercial DVDs. It's a beautiful free tool.

IDVD project with Win DVD burner???

I was wondering If I can do a project with iDVD then send it to a Win comp to have it burn onto DVD. I have a Mac mini without the DVD burner.

Hi Chris,
See the other thread with the same question: http://discussions.info.apple.com/webx?128@@.68baeb53

How do I move an iDVD project to external

I recently upgraded to iDVD '08 and see that now, one of the output selections is iDVD, meaning it goes straight to that. When this is selected, it automatically begins creating the file as opposed to asking where you'd like to store it. It ended up in my documents on my HD. I figured no worry, I'd just move it over to my ext HD since it was over 2GB. But when I did this and tried to open it, it said 2 files were missing. So, couple of questions. First, I remember with the last that you just output a file that you then, yourself, dragged into iDVD. This seemed very easy. But with this way, it seems to automate it. How can I output so that is does it the old way, where it generates a file that I can place in iDVD myself, and that I can store on an external. Second, if that's not possible, what files do I need to locate to move to the ext, where do they hide, and where should I store them?
Why do they make what was perfectly easy, hard?

If I understand you correctly, you are actually asking two different questions.
1. Do you mean that with iMovie 08, when you select to 'share' your movie to iDVD that iDVD opens a new project automatically?
You do not have to use the output options in iMovie. Just close your iMovie and open iDVD yourself, choose to create a new project, select a theme, then go to the Media tab, then 'Movies,' locate your iMovie and drag it onto iDVD's main screen. Be careful not to drop it into a menu Drop Zone.
2. You also would like to have your iDVD project saved to a different location than the default 'Documents' file. When you open iDVD and create a new project, you will see a dropdown box showing Documents as the save location. You can change that right from that drop box.
However, it is recommended that you save your project on your computer's drive, not an external drive. The iDVD application itself must run from your computer. Some users have successfully created and burned projects located on other drives, but many have run into problems.
You can certainly save your completed iDVD projects to an external drive by doing a 'save as disk image' from within the iDVD project. This will look like the burn process, and take just as long for the encoding, but the end result is a disk image file, not a burned DVD disk. The disk image file is a self-contained file that is an exact replica of your iDVD project. It can be moved without losing the ability to burn DVD disks from it in the future.
Remember that an iDVD project itself should be thought of as a container that has references to media files used in it, but it does not actually CONTAIN the media files. When a DVD is burned from an iDVD project, iDVD locates the needed media and copies it for the burn, doing this for each disk burned. Sometimes there are burn 'glitches' where the first DVD disk burns fine, but others may not. Also with an iDVD project, if you rename, move, change or delete any of the files used in the project, iDVD will be unable to locate them and will not be able to open properly. With a saved disk image file, you can safely delete the original iDVD project and the original iMovie, thus saving drive space.
Burning DVD disks form a disk image file using Disk Utility or Toast is a better way to burn DVD disks since the files are all encoded in the disk image file and do not have to be copied in each time.
Please post back if any of this is not clear, or does not answer what you need to know.

Problem with external Lacie disk

Hi!
I have some serious problems with my Lacie 250GB Porche disk.
The disk shows up on my desktop but it does not allow me to read and write to it. Apple's disk tool does not manage to fix the disk. I have tried running Diskwarrior, but it gives me an error saying that the disk could not be rebuilt due to a disk malfunction. I am now using Techtool Pro 4.0.4. I have not used Techtool before, only DW. Im running a process called "Recover Files Using Directory Data"...is this the one I should be using? The manual was'nt all that clear about this...Please please help me as I have 44GB of client projects on this disk.
Thanks in advance,
Tom - Norway

Hi Richard!
Thanks for your response!
I have now bought Data Rescue II from ProSoft:
http://www.prosofteng.com/products/datarescueinfo.php
It seems that the problem is my external harddrive and not the machine. I get read errors when I try to open projects in Photoshop / Indesign etc.
There are of course companies that can retrieve my data, but thats like my last solution cause they cost loads of money
Hoping that Data Rescue can clone my data to this new hd. The process seems to be taking days... 165.2 hours left and it has been working for two days now
Tom - Norway

Making copies of idvd projects on external dvd duplicator not working

i've been trying to make duplicate DVDs of projects i've made on idvd on an external DVD duplicator (Athena) and it won't work, keeps saying there isn't enough space on the disk when it's the same size disk i used for the original. it does, however, work for copying professional CDs (i tried just to see if it would work at all). my question is, is there something i need to do when making the original in idvd in order for it to be duplicated? i have idvd 5.

Is there something i need to do when making the original in idvd in order for it to be duplicated?
No
You need to contact the external DVD duplicator (Athena) manufacturer and see what THEY advise.
F Shippey

Problem with external LaCie dvd burner

This is not strictly a Mac question but I have a firewire LaCie cd/dvd burner that has stopped recognizing any cds. When you insert a cd it clicks and the light blinks forever. It has no problems with dvds. Could this just need to have the lens cleaned or is it on its way out? Any thoughts would be appreciated. Thanks.
Doug Campbell
12" G4 iBook, 20" iMac G5 w/iSight, LaCie 250 GB, LaCie DVD DL Mac OS X (10.4.8)

Thanks for responding, Miriam.
I know that it would be better to talk to the manufacturer but it is extremely difficult to contact LaCie tech support now. One used to be able to just e-mail them a question but now it ain't that simple. Just thought I'd see if anyone else had a similar problem with a cd/dvd burner.
Doug Campbell

Message appears when displaying project with external link

Dear Sir,
I am very fimiliar with Robohelp 6 options. As I upgraded
from version 6 to 7 , some of the things were different. I have a
huge webhelp project that is composed of many sub-projects, in most
of them there are hyperlinks to each other.
the problem is that whenever I open a project that refers to
an external topic, a message appears saying : (The Hyperlink ....
used in .... is outside the current project and will not be shown
in project manager)

It is a standard message and if you are satisfied the links
are good, then there is an option to turn the warning off.
I suspect you turned it off in RH6 and the installation of
RH7 has just brought it back.

How to back up Final Cut project with external hard drive. Absolute beginner, so simple steps appreciated.

Hello - How do I back up a Final Cut pro project onto an external hard drive? It's a work in progress, not a completed project. I'm a total beginner and a step by step would really helpThanks

BenB wrote:
The auto-backup is the database only, not the media.
To back up the whole Library totally, first make sure to Consolidate it, then simply drag-and-drop it on to the backup drive, that simple.
The KB article referenced by Karsten suggests one additional step: make sure your copy of the library is not at the root level of the drive to which you are copying it. I have not clue why this might be important.
Herewith:
Back up your Project Library and events using the Finder
To create a single backup copy of your Project Library and events, you can copy the Final Cut Projects folder and Final Cut Events folder to an external storage device.
If you are backing up incrementally, create a folder structure that helps you easily navigate through your backup folders. You could label the folders with the date you made the backup copy, for example.
Important: To avoid issues, it’s essential that you place the backup files in a folder (named “2012 Final Cut Pro Backups,” for example) that is not at the root level of your external storage device.
In the Finder, locate and select your Final Cut Projects folder and Final Cut Events folder.Your Movies folder is the default location for all project and event files:/Users/username/Movies/ Important: If you moved a project or event after you created it, it will not be in the default location.
Drag the Final Cut Projects and Final Cut Events folders to the external storage device.
The folders are copied to your external storage device.

Problem deploying project with External Resource Integration with jars

Hi,
Please help ur how we can deploy a project in Enterprise server if that is integrated to some application which needs weblogic.jar. If this jar is made vesionable then it shows a size problem. If that jar is added to Install Drivers (In the configuration screen of Server) it does not accept it and does not show error while deployment. But, the activity which is using that application is failed while execution.
Kindly provide me help over this.
Regards,
Sarang

What do you mean with a "size" problem? I've added weblogic.jar to the project (or any jar of that size) and it works fine. As rightcord mentioned, you can just put it in the classpath, but if you don't want to, you can still use it in your process.
You just have to deploy in another way, meaning you don't have to use the exported project but you can upload it the lcoation of where the server is running and publish from there - I believe this is option 1 in the Process Administrator.
Good luck!

Converted my iMove/iDVD Project with Disk Utility as a .CDR file

Hello,
I filmed a wedding years ago.
Used iMovie and iDVD and gave to the client.
To save room on my HD I used Disk Utility to make an exact copy by making a .CDR file
I now would like to open that file and just take certain clips of my finished product and upload to YouTube for other to see my work.
Problem is nothing seems to open .VOB files.
MPEG Streamclip just gives me a line with no video or sound.
Wondershare is perfect but cost $50.00
Any suggestions on what I can do?
Thank you for your time.
John

The last recommendation as pointed out above will likely provide the results you wish and involves just that application as opposed to combining multiple apps to do the very same thing. Toast is also a great choice (but more $$ if you don't already own it).
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Burning iDVD projects with external LaCie burner

Similar Messages

Maybe you are looking for