Burning in iTunes so that CDDB Data Stays instead of track 1, track 2...
Hello,
I would like to be able to burn my CDs with the CDDB data that iTunes has instead of iTunes burning something that says:
track 1
track 2
... etc.
So that when I go to a friends house and put the CD in their computer, it will read all the correct info. DO I need do buy Toast or something for this? Is there anyway I can do this?
i'm trying to get the gist of this but...
i'm using itunes 6.0.4, on a new g5, with 10.4.5, and i burned some cd's from my playlist tonight, and the playlist song titles were missing from the FIRST cd i burned, of what becomes a two cd burn. in other words, more than one cd needed to burn the playlist. all i got was 'track 1' etc. the remaining song titles appear on the SECOND cd. why is this? is this specific to the new version? why do song titles appear on a burned cd where the playlist only requires one cd?
on my desk, is my old half-basketball imac...i used it tonight to burn a few of these cd's, and all the song titles appeared on all the cd's. it's using itunes version 6.0.3. in any case, how do the songs appear only in certain cases?
where is the window that opens that asks to 'name this cd'?
by reading here, it would appear that i should never have been able to see song titles when i put a cd i burned into the player. but i have. always. and i don't have toast, or jam. so what's up with this??
thanks for any feedback.
imac g5 2.1ghz Mac OS X (10.4.5)
Similar Messages
-
I carefully number my iPod bound photos so that they are in a desired order by filename. When I sync the photos to my iPod Classic they are not in the same order. A typical filename would be: 001 001 IMG-3489.jpg followed by 001 002 IMG-3478.jpg. Windows uses the first seven characters to order the files and does not care what follows the first seven so long as the first seven are not duplicated within the folder. My iPod ignores that convention. HELP! PLEASE! I want to view my slideshows in the correct order.
ThanksDoes both your Windows and Macbook iTunes have the same library of songs?
if it does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
Connect the iPod to the Mac, (if iTunes launch, please close it back.)
Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
After the Repair complete, eject the iPod.
Connect back to the Mac
When iTunes launch, Restore the iPod when Prompted, (use FAT32)
Sync your library.
Good Luck! -
ITunes 9 will not burn a music CD that can play on a CD player
Ever since I upgraded to Itunes 9 I cannot copy (burn) a music CD that can be played on any CD player device other than the MacBook. I tried changing the format preference from .aif to .mpg4a but it still only creates CD's that cannot play. I am not pirating anything. I copied my own bought retail music CD's onto the MacBook and gave away the CD's to eliminate clutter. In the past I have been able to copy them for my own use for the car or the bedroom where there is no computer available. This is so frustrating. Please help!
does the format of the original song make a difference? for instance, if the data is mp3 data, but you try to burn an audio cd, will that mess it up? I dunno. it didn't use to, I dont think. I have no idea about iTunes9
You could convert the songs to .aif in QuickTime before hand just to make sure iTunes9 isn't messing it up. -
When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID. -
My PC Windows 7 hard drive crashed. I have a new hard drive. But i lost all my CD's that i had burned onto iTunes. They are all still on my iPhone 4s, but when i sync, only the purchased songs will import. Is there anyway to retrieve them? Thanks!
Restore your library from your most recent backup (you do keep regular backups, I hope). If the hard drive is in any way salvageable it may be possible to mount it in an external enclosure, connect it to your PC, and retrieve data from it even if it is not functioning as a primary OS drive (if you don't have the kit necessary to do this, your local PC repair shop may be able to help). Failing that, you can always recreate your library by re-importing your CDs.
-
I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?
-
itunes will not open and I get a message that the "Data Execution Prevention (DEP)" feature in Windows is preventing it from opening. (this is after I've been using itunes for years???? If I try to manually deselect itunes from the DEP filter, of course I get a message that itunes cannot operate without the DEP active...another Catch 22 from the evil program designers....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
P.S. I have not taken any backup of my iPhone on itunes..
Please help me sort out this issue..Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps! -
I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC. When I want to sync my iPhone, I get her data, not mine.
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H. -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?
bradenfromwaikerie wrote:
itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?
because you do not have a 3rd generation device. The OS Version says so , otherwise you would be at 4.3.5 minimum and also Itunes is also always correct in determining if you have the latest OS ( if not it fetches the newest from Apple's Servers ) . And because a 2nd generation iPod stops at 4.2.1 you can't get the newest OS, because your device is old. Buy a new iPod , they have iOS5 preinstalled. -
Corporate issued iphone 4S. Trying to update to ios 7. I tunes not recongnising the phone, and I get this message:
"itunes unable to load data class information from Sync Services. Reconnect ot try again later."
I have disconnected from itunes several times. The phone is dead, as if it was brand new.
I get "slide to setup" and then connect to wifi, which works, but nothing after that, just above message.Hello there, scott_arrow.
The following Knowledge Base article offers up some great information for your particular message:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
iTunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this? You used to be able to swipe and delete a song straight from your phone but I can't seem to do that anymore.
That is stealing.
-
When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Cred.lim.used field in FD32 not getting updated
hi All, I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32 when I go to fd33 for a customer my Credit limit is 1,000,000.00 and Credit exposure is 1,138.28- but the %age is 0.00 %. any suggestions than
-
How To Install 10.5 On A 1st Gen iMac G5
Hi All 1:40am and I give up and ask for help! I am trying to install 10.5 on my old iMac G5 but am having massive problems. I wont bore you all with the history but just descibe the position I now find myslef in and hope someone can help me get this
-
How I got Xorg working under Optimus
I have just gone through the process of installing Arch Linux on my laptop(Dell Latitude E6420, NVS 4200M + Intel IGFX), without any major issues. I used the Beginner's Guide, the Bumblebee wiki page, and the 'installing X' wiki page to assist my ins
-
Pages that use flash freeze up in mavericks.
When viewing a page that uses a flash plug-in, the page will freeze after a few seconds of inactivity by me. It will start again if I touch my mouse or track pad over the area, but that's no solution. That's terrible. I thought maybe it was a new set
-
I am getting an error when I print or try to print a test page. The error is: PCL XL Error Subsystem: TEXT Error: InternalError 0x50 File Name: cheettext.c Line number: 710 This message is printed in place of the document that was intende to print. T