Burning .mov - bad quality

Hi everyone,
I have to put a flash animation (up to 13 mins) on a DVD.
I make a .mov out of Flash (tried both animation and H.264 best quality encoding multipass), then I import it in iMovie and "share" it with iDVD, set the iDVD preferences to PAL - 4:3 - Professional quality and so the project properties.
At this point, everything looks great, the preview is good. But the dvd I get looks awful. It looks all pixelated.
Why? The word "professional" makes imagine something excellent. It *****. It's not professional at all. What am I missing? What can I do more? I've already wasted something like 30 DVDs, trying various combinations of quality settings.
Thanks for your help.

Hi nanci.thewebdes
Welcome to apple discussions. I see you have a question regarding iDvd and Flash movies.
Most Flash movies are not supported in iDvd according to iDvd's help Menu and I quote:
The following video and image formats are not supported in iDVD:
◼Copyrighted or protected videos.
◼Movies saved in thousands of colors using the “none” compression setting in iMovie.
◼48-bit color images (16 bits per color). To use source files in one of these formats in iDVD, save them in a supported format.
◼Aurora uncompressed files. For best results, export Aurora clips as DV-format video before importing them into iDVD.
◼QuickTime VR, MPEG-1 or MPEG-2, Flash, streaming or encrypted movies, or QuickTime spanned movies. You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks.
◼QuickTime Fast Start movies. (Fast Start movies are intended for Internet playback.) When saving a QuickTime movie for use with iDVD, click the Options button in the QuickTime Export dialog and make sure that the “Prepare for Internet Streaming” checkbox is not selected.
Message was edited by: SDMacuser

Similar Messages

  • Using iDVD to burn movie reduces quality. Any suggestions?

    When i used iDVD to burn DVD the resulting picture quality was poor. I know that there is a better way to retain quality but can't remember how to do it.

    Hi
    If You want the quality a DVD can hold (interlaced SD-Video Quality at it's best) then
    • do not use iMovie'08 or 09 or 11 - as non of then in any way known - can deliver this but discard every second line in the picture resulting in a quality loss (sever to some = me, slight to others)
    The problem occurs when moving an Event to a Project - it's here the lines are lost = why they can not be mended in after hand (later).
    • Use - iMovie HD6 or FinalCut any version - as they all can deliver what iDVD, DVD Studio Pro, Toast or Burn can use.
    If feeding iDVD progressive HD material - the resulting DVD will not improve - but be even worse due to BAD downscaling function.
    Yours Bengt W

  • Exported mp4 movie bad quality, deleted imovie project! Help!

    Hello,
    My girlfrien exported an iMovie project using Quicktime in mp4 format, but forgot to check the quality. Now the quality is extremely poor and this has happened to all her videos. She deleted the original projects, including the iMovie clips. All the movies were exported to an external HD and there is no sign of the original files in the computer.
    Anyway you can compress/decompress the video back in order to gain good quality again?
    Best

    Sorry, but unless you can get the original files there's no way to recover the quality.  I would recommend saving your video files to Blu-ray for archiving.  Blu-ray encoding is a relatively cheap format and easy to encode.

  • When I burn a dvd, it's really bad quality in black & white

    When I burn a dvd, it's really bad quality in black & white.

    What program are you using to burn the DVD? What is the original DVD content (another DVD disk or movie files -- what's their format?)?

  • Does anyone experienced bad quality when burning a DVD?

    Does anyone experienced bad quality when burning a DVD?
    Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

    Hi my notes on this - might be of help
    DVD quality
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
    iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus  less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    Yours Bengt W

  • Bad quality when play mov or mp4

    I want to play mov or mp4 by quicktime. In my laptop it play well but in my another computer the quality for video is very bad!
    Following is the features of that computer:
    Windows XP Pro SP2
    VIA C7 Processor 1500MHZ 512M RAM
    Graphics card: VIA/S3G UniChrome Pro IGP
    I upload the screen snapshot of this problem on my blog. Please look at the following url:
    http://apolloxiao.blogspot.com/2009/11/bad-quality-when-play-mov-by-quicktime.ht ml
    Thank you very much!

    My first thought was a video card driver because that will produce the streaks across the screen but usually more extreme.
    Then it could be hardware related, do you know the history of the computer, as to any recent changes?
    I don't really have a solution and don't want to string you along. But I swap around hardware, and me, I'd pull the video card out and make sure it's seated properly in the AGP or PCI slot on the motherboard. If it's not a on-board video card.
    You seem to be showing a dual monitor set-up? If so wouldn't the primary be on the right?

  • Bad quality mov files

    Hello everybody,
    Since the last update to Final Cut Pro X 10.1.1 I get a bad quality of movies. They are a bit "bumpy". It feels like every few minutes a few frames are missing. The movies are not running "smoothly" anymore. (Especially the MOV files are bad). I never had this before.
    Is there someone familiar with this problem?
    Hans Lijnbach

    I use Wondershare to convert files, because FCPX does not reed most formats. I convert files with Wondershare to MP4, so that FCPX can read the files, and I am able to make changes. After changing the files I export them to MOV or M4V so that iTunes or Apple TV can read the files. Almost all files are H.264 with AC3 surround sound. After conversion with Wondershare they are H.264 with AAC suurond sound. (M4V or MOV).
    Wondershare is reliable. If I convert the files with Wondershare directly to MOV of M4V, I don't have any problems. The only thing is, Wondershare is just a converter, and I can not make changes with Wondershare. That is why I use FCPX.
    Sorry for my late response, but that is becuase of the time lap. (Netherlands).
    Anyhow, thanks for your effort.
    Hans

  • Stills using the Ken Burns effects are bad quality

    The high quality still I'm inserting into the timeline using the Ken Burns effects are bad quality.  Do you know why?  I don't have that problem in iMovie.

    Yes, I have rendered it (I think).  Not sure how to do that and don't know how to get the "complete specs" of the still image and project.

  • Bad quality preview via HDMI

    Hello together!
    After searching for days in the www and on this board I hope somebody here knows a solution for this problem:
    Im looking for a quality solution to preview the program monitor as a full screen picture on my Panasonic HD-Ready TV. I got it running, but there is a really strange quality problem:
    When I just use the TV as a second Windows display and I move the program monitor onto it (no full screen but at 100% display level) the preview looks nice but I can not see the complete picture, because 1280x720 plus the program monitor itself is too big for my screen When I change the display size of the program monitor to something lower than 100% the scaling looks very bad higher than 100% no problem with scaling.
    So this is my problem:
    When I switch it in the playback settings to playback on extern monitor to view it full screen there is a problem. Diagonal lines get a bad looking aliasing. My idea was that CS3 is scaling something (and this does the program not as good as I tried the preview with trailversions of Edius5 or Vegas8c). Just at 100% CS3 preview looks nice (the same when I just watch the program monitor on the Notebook display).
    My Nvidia Card is set to HDMI 720p output. The TV says it is a 720p signal what is coming form my HDMI cable, and last but not least my footage is also filmed in 720p60 (Sony Ex1) and I used the 720p60 EX1 setting in CS3.
    So again, when I just watch these clips for example with the Sony clip browser on my TV (also form this Notebook via the same HDMI output) the diagonal lines start not to flicker and are displayed very sharp. So it cant be the graphic card, the TV or the footage at my knowledge.
    So why does CS3 scale there something in the full screen preview although from input to output everything is in 720p? Furthermore why is the scale in such a bad quality (Edius does this perfect so maybe I have just a wrong setting somewhere in my CS3 settings). Is CS3 not using the graphic card for scaling?
    My system:
    Asus V1S Notebook
    NVidia GeForce 8600M GT 512MB
    Duo T7500
    2GB Ram
    Windows Vista
    Hope somebody here is able to find a solution for this problem, because I dont want to buy an extra video board (like Axio) for it.
    Best wishes,
    Swen

    But often with these cards, you can not work in the CS3 normal nativ settings for Ex1 footage.
    At my knowldge when I would like to open a project which with a Blackmagic Card for example and I like to finish the editing on an other computer without that card you'll have a problem (because BM or other cards allway use their own presett window-right?). So you lose a lot of flexibilty by using a card or a third party codec like this. So it's not so future proof as just to work with the NLE Software itself.
    I see this now with my old Premiere 6.5 Projects. I used a Canopus Raptor RT2 for this with the Canopus codec. That worked very very well, but now I can't use this project anylonger on a new editing CS3 station, because it doens't support these Canopus transitions and codecs. Also the only Windows Notebook based output solution is the MotuV4 box... not a very cost effectiv solution for a preview.
    So again. There must be a sloution to get the problem with the diagonal lines fixed. Why does CS3 scale the preview when 720p footage should be displayed over a 720p output onto a 720p Monitor? No need for scaling? Or am I wrong with this?

  • I'm going to get the I Mac and since the new I Mac doesn't have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes onl

    I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
    Thank you
    Haim

    This freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
    But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
    Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing.

  • MiniDisplay Port (Thunderbolt MacbookPro) to DisplayPort Dell U2410m don't work! The signal only comes as YPbPr, no RGB and bad quality. Is there any solution?

    I want to connect my new MacBook Pro via DisplayPort to a Dell U2410m monitor.
    But the signal only comes as YPbPr, no RGB and bad quality. Is there any solution?
    It works with the mini display port to DVI adapter from Apple but I want to use the DisplayPort.

    J~
    cmelbourne91 was suggesting HDMI because many of the MDP/Thunderbolt to DVI adapters come with an additional DVI to HDMI (not Apple's) and you likely won't find any MDP to HDMI becuase of something weird with one of the Apple or HDMI related patents and the type of cable/jack/plug required for it.
    As for my computer (15" MBP mid 2010), it almost seems as if I have your problem but intermittently. When connected to an external monitor or projector, the thing will project just fine, but then after some time (and no movement of the computer, cables, or screen) the connection quits. Sometimes it comes back on, sometimes it does not, but it basically registers as if there is no external display.
    Any additional info on this?

  • My exported 2015 iMovie file has bad quality.

    Hello.
    I just got a new MacBook pro, OS X Yosemite 10.10.3.  Using iMovie 10.0.7 (the latest version to my knowledge.)
    I realize that this question has been beaten to death all over the internet, but I haven't made any headway STILL.  I just completed an edit that looks AMAZING in iMovie, and when I export it, the file is very distorted.  I'm exporting at the highest quality (1080p) and the file ends up being 8GB (8 minute movie) which I would think a big file like that would produce good quality.
    I'm stuck.  Any help would be greatly appreciated. 
    Here's the upload (notice the distortion and grainy-ness during motion, again looks AMAZING in iMovie.)
    https://www.youtube.com/watch?v=eeQ85ybI_II
    Mike

    iMovie file has bad quality.
    hmmm, really?
    I pick up a scene ...
    <click for fullsize>
    This is a 'killer' for any encoder! Those ultra-soft gradient in the sky shows no banding!
    Not to say: superb! Compare to a less encoded version:
    <click for fullsize>
    you see? THAT is bad quality! Tons of banding in the sky...
    ... post a scene, which doesn't fullfill your standards …
    btw: what camera in use? settings? a GoPro I assume, those 'cinema' settings?
    PS: you let YT play it in as 720/1080? ....

  • +++ Photos imported from iPhoto to imovie6 become bad quality.

    Although imovie 6 is caught up with a sum of disadvantages of imovie
    5, I observe a new disadvantage which did not exist before.
    With knowknowing:
    In the "multi-media" mitre + "photographs", when I import
    a photograph from iphoto, I observe that the image which is transcribed
    in the screen of the visual display of imovie 6 is of a perfect
    quality.
    For example, a photograph taken with 3,5 Méga pixels with a
    weight of 2 Mo. PRECISION : !!!!!! ( FORMAT IS JPEG ) !!!!!
    The image is perfect, and in the internal adjustments
    with imovie 6 that they are with or without the effect Ken Burns,
    it seems the original.
    However when I decide to apply it in the
    timeline and that I it replay in the visual display, I note that the
    quality of the image was strongly degraded ( very bad quality).
    There are somebody in the specialists or the helpers who can give me explanations and how to cure that,
    because this disadvantage is strongly regrettable and detrimental for me.
    Thanks to you.
    powerbook G4, 17", 1,5 G   Mac OS X (10.4.6)  

    Hi pierre - here are some more useful references:
    Still Photo Quality in iMovie:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow
    http://discussions.apple.com/thread.jspa?messageID=961100&#961100
    http://discussions.apple.com/thread.jspa?messageID=971053&#971053
    http://discussions.apple.com/thread.jspa?messageID=961093&#961093
    and maybe especially:
    http://discussions.apple.com/thread.jspa?threadID=245638&tstart=0
    http://discussions.info.apple.com/webx?[email protected]@.68be025d/13
    and from Karl Petersen – to create Best Quality Still Pic for iMovie:
    http://discussions.apple.com/thread.jspa?messageID=1921544#1921544
    The main point to keep in mind is that before importing your photos, you must have the Ken Burns effect turned on in order to achieve the best quality. Also, remember that the iMovie screen is just there for editing purposes, and does not display the clips at full quality.

  • Bad quality DVDs

    I'm getting really bad quality DVDs, especially the menus. I created the menus in Motion and used them as menus in DVDSP 4. I build the DVD in DVDSP and everything looks OK, even when I play it using DVD Player, but when I burn it and play the disc with Player it looks dreadful, like bad encoding. I'm encoding with VBR at a bit rate of 5 with a max of 6.5. Any ideas? Thanks.
    Chuck

    Hi CHuck,
    i've never used Motion, but i can't help you there except to say double check that you are using the full quality settings.
    Did you use 1 pass or 2 pass VBR? Your bitrate seems fine. What was the source (Vhs; camcorder; stills?) Try the DVD on another player. Some of mine look different on my samsung player than on my Sony, with the latter looking much better.
    Are you using a brand name type of DVD media? That could be a problem if not. Are you burning at 1xDVD speed (only available through Toast). Maybe the burn speed is too high?
    Cheers,
    keebler

  • ( Additional ) Bad Quality : Photos Imported from iPhoto6 to iMovie 6

    Although imovie 6 is caught up with a sum of disadvantages of imovie
    5, I observe a new disadvantage which did not exist before.
    With knowknowing:
    In the "multi-media" mitre + "photographs", when I import
    a photograph from iphoto, I observe that the image which is transcribed
    in the screen of the visual display of imovie 6 is of a perfect
    quality.
    For example, a photograph taken with 3,5 Méga pixels with a
    weight of 2 Mo. PRECISION : !!!!!! ( FORMAT IS JPEG ) !!!!!
    The image is perfect, and in the internal adjustments
    with imovie 6 that they are with or without the effect Ken Burns,
    it seems the original.
    However when I decide to apply it in the
    timeline and that I it replay in the visual display, I note that the
    quality of the image was strongly degraded ( very bad quality).
    There are somebody in the specialists or the helpers who can give me explanations and how to cure that,
    because this disadvantage is strongly regrettable and detrimental for me.
    Thanks to you.
    powerbook G4, 17", 1,5 G   Mac OS X (10.4.6)  

    Hi pierre - here are some more useful references:
    Still Photo Quality in iMovie:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow
    http://discussions.apple.com/thread.jspa?messageID=961100&#961100
    http://discussions.apple.com/thread.jspa?messageID=971053&#971053
    http://discussions.apple.com/thread.jspa?messageID=961093&#961093
    and maybe especially:
    http://discussions.apple.com/thread.jspa?threadID=245638&tstart=0
    http://discussions.info.apple.com/webx?[email protected]@.68be025d/13
    and from Karl Petersen – to create Best Quality Still Pic for iMovie:
    http://discussions.apple.com/thread.jspa?messageID=1921544#1921544
    The main point to keep in mind is that before importing your photos, you must have the Ken Burns effect turned on in order to achieve the best quality. Also, remember that the iMovie screen is just there for editing purposes, and does not display the clips at full quality.

Maybe you are looking for

  • Secondary monitor on 20"iMac, How to set portrait orientation when running

    How do you set the display rotation in Windows XP? I have a secondary monitor (wall-mounted at 90 degrees to normal) that OS X handles just fine (the display preference window provides a rotate function). However, when running Windows XP, the seconda

  • Create multiple instances of same class but with unique names

    Hi, I'm creating an IM application in Java. So far I can click on a user and create a chat session, using my chatWindow class. But this means I can only create one chatWindow class, called 'chat'. How can I get the application to dynamically make new

  • FileVault

    Hi everyone! I'm a new member in the Apple-family, using both a iPhone 4 and my totaly new macbook Pro 13". I want to protect my personal information and what I have understand all personal information on a Mac is stored in the Home folder for the ac

  • IMovie transferring movies from iphone

    How can you import movies shot on the iPhone 4 into iMovie on the ipad2, can I assume you use iTunes to move the movies from one device to another, don't own a mac using iTunes on windows 7 also if you are not near a computer can you move movies acro

  • Standard transaction entries can go to ztable

    hi experts, plz tell me that standard entries of any transaction can go to ztables ? e.g mm01 transaction entries is going to mara but if i create my own zmara table then how can i enter the entries created by user in my zmara table. plz guide me. th