Burning my DVD with more gigs than the disc

I am going to be burning my new movie shortly. It is approximately 13 GB. The DVDs I have show "4.7 GB" on the box, so I am assuming I can't put my entire movie on one disc.
Do they make discs larger than this so that I can put the whole movie on one?
1) If no, can I put the movie on several discs?
2) If yes, is that preferable to #2?
3) About how long will it take to burn this movie?
Thank you for your help!

iDVD cares for length, not size of a project...
as you found out, a project can contain 50,60,70 gigs of video (=imports), but as long as it is under 120min (the project/timeline, not the imports), it will fit onto a single-layer dvd-r of 4.7 GB ...
that is the marvel of converting, using different codecs.
iM uses 'dv' which is a editable codec, e.g. storing every frame (30frames/sec) of a video.. mp2 compresses much more, meant for playback only, e.g. it stores just the 'differences' from one frame to another.. wiki, if you're interested in this topic...
How can I tell how big just what I have on the timeline is?
there's no need for this info, when using iLife.. therefor, there's no 'button' to hit to tell you..
if you're just curious, you could export your project as 'Quicktime/Full Quality' ... it will result in files, 13GB/h ...due to using the same, identical codec as your camcorder... so, using a calculator is probably easier... ;))
final word about exporting:
no need doing so.
as long as your project resides in the 'Movies' folder, which came preinstalled on your Mac, iDVD will find it there and offers it in its window under 'Media' ...

Similar Messages

New cheaper Iphone with more technology than the old Iphone?

Hello,
I've owned an Iphone since December, and I'm in love with it! There are a few things I've been waiting to have updated, such as, faster internet service and being able to receive multi-media messages. Now I see that there is a new Iphone being released for only $199 when I paid $499 for my 8G. My question is, does this phone that is so much cheaper compare to the old Iphone? And if it's coming with all of the features as the old Iphone, will the upgrade that is being released give the same exact features as the 3G?
Thank you!

The lower cost of the new iPhone is only happening because AT&T (and other carriers around the world) are subsidizing it, and in the process increasing monthly charges to recover the subsidy. In effect over the 2 year contract with AT&T for example, you'll pay marginally more for the new iPhone than you did for the old one!
Basically, the two models are the same. The new one has 3G capabilities, but 3G coverage in the US is very spotty at present and not increasing particularly fast, so a large proportion of people won't be able to take advantage of it. The new iPhone also has GPS capabilities which the original did not, and has somewhat better battery life. Otherwise, just about all the other improvements are in firmware, and the same firmware will be available to download and upgrade existing iPhones early in July.
If you don't need GPS and don't live in a major city where 3G coverage exists, you should be happy with your existing iPhone since not only will you be able to get the new firmware next month to add a lot of new features, but you'll also be paying less each month to use it - your data plan at present is $20 including 200 texts, while the new iPhone will be $30 for data with texting costs on top of that as well.

Is there any syscall with more accurate than the ddi_get_lbolt() in the kernel?

Hi, I used with the ddi_get_lbolt() to evaluate the performance
of my some section code of driver in the kernel, but the return
tick of ddi_get_lbolt() is the 10 milliseconds too long to
evaluate. It seemed no change when I used with the drv_usectohz()
or drv_hztousec() to reduce the time interval. Would you give me
methods to accurately evaluate.
Thanks in advance.

hi,
I tested this code with 10 thousands lines. The performance of this code is very bad. Actually, as per your question, I just think out this code which is the same with SUMIF function in excel. Having another way is using grouping and merge table as below
and this is faster then.
let
Source = Excel.CurrentWorkbook(){[Name="Table1"]}[Content],
Group = Table.Group(Source, {"Date"}, {{"Total", each List.Sum([Time]), type number}}),
Merge = Table.NestedJoin(Source,"Date",Group,"Date","NewColumn"),
Expand = Table.ExpandTableColumn(Merge, "NewColumn", {"Total"}, {"Total"})
in
Expand
Regards,

When i try to burn a CD with Itunes i get the Disc burner or software not found message. How do i fix this?

Here is the diagnostics .......
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Compaq-Presario KY821AA-ABA CQ5110Y
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 2.0.2.0 (214.3)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0027B48809A46938
Current user is not an administrator.
The current local date and time is 2013-02-12 17:58:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4300/4500 Series
NVIDIA, NVIDIA GeForce 6150SE nForce 430
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
F: LYVSDSD RS9EBKP6B4D, Rev 1.03
Drive is empty.

Anyone have any thoughts on this?

How to avoid invoicing more quantity than the PO's in non stock PO?

Hello SAPients!
Scenario: We create a non stock PO with a material that has no number and no material group, when we use MIRO TCode to invoice it we can create the invoice with more quantity than the PO, we can even keep adding quantity to the invoice.
How can we stop that? How can we configure our system in order to create the invoice with the exact (or less) quantity than the stated in the PO?
Thanks in advance for your kind help.

Hi,
Use t.code: OMRM & Maintain the following messages
1. M8 -081 Quantities invoiced greater than goods receipt quantity as ERROR ( maintain GR-based IV in the PO item level )
2.M8 -087( item without GR ) - Invoice quantity greater than PO quantity as ERROR & save.
Now try doing MIRO.
NOTE: If the above setting not work ,then Maintain the messages M8 -081 & M8 -087 as ERROR in OBMSG t.code & save.
Regards,
Biju K

'Find an Item' search on list with more items than view limit

Hello all
The 'Find and Item' search on a list with more items than the view limit appears to filter results according to where you are in that list. So if I search on the allitems page displaying items 1-100 I get hits from the entire list. But if I arrow
through to view items 201-300 and repeat the same search only items from 201 to the end of the list are returned
I'm assuming this is not how it should work i.e. it should always return results from the whole list. Is there a way to make that so (other than increasing the view limit to something huge so that all items are always displayed)
Many Thanks
Dan

Hi,
According to your post, my understanding is that Find an item Search box in List didn't returned any results.
The problem is due to a difference between the Content Source defined for the crawl and the default zone defined in the Alternate Access mapping.
You need to change the Alternate Access Mapping configuration.
For more information, you can refer to:
http://blog.jonathanroussel.com/2009/01/sharepoint-search-using-this-site-or.html
http://blog.dafran.ca/post/2011/07/02/SharePoint-does-not-return-any-search-results.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

Hi Tracy,
I'm guessing "ash" is the silver colored keyboard, the same color as the rest of the MBP? If so, that machine, with the optical drive slot on the front, is the older machine.

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

Hello! I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!) Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?

Hello!
I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!)
Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?
Thanks in advance!

Hi Fencer1986,
I apologize, I'm a bit unclear on your request. If you have questions about headphone compatibility for your iPod shuffle 3rd Gen, you may find the following article helpful:
iPod shuffle (3rd generation): About headphone compatibility
http://support.apple.com/kb/ht3472
Regards,
- Brenden

Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

Burning a DVD with Final Cut Pro X stops at 95%, why ?

Stops completely? Mine stopped at 95% for quite a few minutes then finished. This is usually the time in the process where the lead out is being burned and it will not show progress for some time. If it is taking more than 10 to 15 minutes from that point you may have another problem.
stephen

Will iDVD burn a dvd with surround sound?

I have a quicktime movie with surround sound I'd like to burn to a DVD. Will iDVD burn this and keep the surround intact?
If not, will the latest Toast do this?
If not, are there any other OSX apps that will burn a dvd with surround, preferably a cheap one? I know DVDSP will do it, but that's overkill for burning one disc.
Power Mac G5 quad 2.5 and Mini duo 1.66 Mac OS X (10.4.7)

Hey don't get me wrong, dolby digital surround is way
better than ProLogic, but give the dudes credit that
came up with ProLogic in the pre-dolby digital days
some credit, it is "true" surround.
Sure, it is surround, but it's not the same as having four separate channels. There are limitations to what you can encode, and you can end up with unintended issues on both stereo and surround material. It was a cool invention that was a big improvement on stereo, but it just isn't the same as actually having the channels. It just isn't "four true distinct signals" - it simply can't reproduce everything four true distinct signals can.
I should have said I need actual discrete channels.

I need to burn a DVD with a menu and everything but I don't have iDVD. Help please? I bought my iMac in March 2012.

I need to burn a DVD with a menu and everything, but I don't have iDVD. I bought my iMac from an Apple store in March 2012. Help please?

You may be able to find iDVD as part of the iLife 11 Retail Package. It is no longer sold by Apple, but you may find it on eBay or Amazon.
Other options include Toast from Roxio.
See here for more discussion of the options.
https://discussions.apple.com/docs/DOC-3711

Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support

Burning my DVD with more gigs than the disc

Similar Messages

Maybe you are looking for