Burning PAL DVD

So with Shanes help last night I managed to make the .mov PAL formatted using the nattress Standard conversion filter. Now I went into DVD Studio Pro made my menus made sure it was PAL ready and started the burn process.
Yet it failed and the reason that DVD said is " Final PAL (Video):Invalid Video Asset"
Can anyone help me burn a proper PAL DVD?
Thanks

Hi Anthony,
A couple of things to check.
Go to the asset in the finder and try and open it with quicktime player.
If it doesn't you have found your problem.
If it opens, if you could check the movie info and paste it here for us to view.
Also if you can paste what DVDSP thinks this asset is.
The most common problem with this is the frame size is correct ie 720 x 576 but it's still 29.97 fps. It should be 25fps.
Cheers

Similar Messages

  • Burning PAL dvd from NTSC FCP 6 project?

    I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
    Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

    If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

  • Cannot burn NTSC DVD after burning PAL DVD

    Using Adobe Premiere Elements vers.10, I created a video which I need to burn onto DVDs, in PAL format for European users and NTSC for North American recipients.  I successfully burned (to folder) in NTSC, and then in PAL.  Produced two sample DVDs from those two folders and reviewed them.  This highlighted the need for a few corrections to the project.  I carried these out, burned the revised film to folder in PAL format, and then wanted to do the same in NTSC format.  The computer appears to work on the task, but produces no folder and no files.  I am no longer able to procude a DVD in NTSC format, either by burning to a folder or burning directly on a DVD.  What is the cause of this problem ?
    Thanks in advance for any help you can provide with this issue.
    Paul

    Paul,
    I do not recall any issues, where the program gets hung up, though as a precaution, maybe clear the Media Cache in the Scratch Disks. I know that Encore (sort of the authoring "big-brother" to the authoring function in PrE) can get confused, when it has some older Media Cache files. It assumes that things have already been done, when it needs to "start over."
    Also, I would create a new, empty folder, with a unique name, and direct the Burn to Disc to THAT folder. Since all that one gets is the VIDEO_TS, AUDIO_TS (empty), and then another folder, whose name I cannot recall (Encore does not write anything but the VIDEO_TS folder and IFO, BUP and VOB files), it's easy to confuse the output. Just thinking here.
    Good luck,
    Hunt

  • *** Burning PAL DVD copies in North America

    A client of mine would like to provide me with her 2-disc DVD set in order for me to make copies for her. The 2-disc set is in PAL format and I'm in North America. Normally I would make a disc image of an NTSC DVD and burn copies, is it the same process for PAL discs? Do I need to do anything differently if I'm making PAL or NTSC DVD copies?

    Hi there
    No you don't need to do anything special, the build has already been done, you're just duplicating the files. Happy burning.
    Cheers
    B

  • Trouble burning a PAL DVD

    Hi, I am having issues with trying to burn PAL DVDs.
    We have a distributor that requires PAL DVDs as screeners with & without TC burn.
    They required we take our masters (HDCAM, 1920 X 1080, progressive, 23.98 fps) & send it to a post house that could do  an Alchemist conversion & make 1080 50i, 25 fps masters on HDCAM.
    This was done & we have captured the tape to FCP in a PAL project. Exported out & files went through compressor using DVD Best quality - 90 min template.
    Confirmed that files are correct size & speed in inspector.
    In DVDSP i set the project up as PAL.
    There are no menus - just the program with 5-6 chapter markers.
    PAL DVD was created as region free.
    When we check the DVD on a region free deck the playback is very jerky.
    Have tried playback tests with commercial PAL DVDs & they play back fine.
    Anybody have any idea what I might be doing wrong?
    Using a 12 core macpro with FCS 3
    If you need more detail please let me know .
    THANKS.

    Russ: Converting the standard is not an option through Compressor as they absolutely need the timing to be the same. I am the post person, so it is not my call. The producer's have determined that this what they have to do (right or wrong). I can do a test with the master file in compressor to see if I get better results, but it is something that I cannot deliver.
    Nick: Again it is not my call. I have pointed it out to the producers & was told that is not acceptable to them. So it is my hoop to jump through. I have told them about the NTSC DVDs vs PAL & their response is that is not acceptable. We don't need worry about DVD replication anymore as all of our sales will become either digital, or delivery through this means by the distributor from the HDCAM 50i masters & using the PAL DVDs as reference.
    Michael: We are monitoring the video from FCP with an AJA KONA 3G card to a broadcast monitor thru SDI (dont remeber the exact model - think it is a panasonic monitor). I will try your test as well, but I think that if I can't get the DVDs to work the way they want them then they are going to get the post house that made the 50i masters to make the PAL DVDs for them as well. They would rather not do this as all I am told is it is expensive, so they would rather not. If it comes to it, and it might based on our deadline, then they will go that route if they feel forced to.
    Thanks to all three of you for the suggestions.

  • Converting HDV FCP projects to burn standard widescreen PAL DVDs

    I film and edit HDV footage from my sony hdr-hc1e on Final Cut Pro 6. I want to be able to burn PAL DVDs of my projects that will work on a normal DVD player.
    In the past I have exported using quicktime conversion from FCP and used the size PAL 16:9 which gives 1024 x 576 size video files. Then my problem was these would not show up as widescreen in iDVD so i was advised to use an application 'Anamorphisizer'. That worked and i was able to make widescreen DVDs. I don't know what changes I've made but Anamorphisizer no longer works. I feel there should be a much simpler way anyway. Anyone know one?
    Thanks very much,
    Ross
    Message was edited by: Ross Harrison

    Hi Ross
    Just thinking but I started a PAL project
    Capture my material
    In Browser - I expanded this on it's right side and far to the right I could select anamorphic. I did for each Captured sequense and the movie project.
    Think that this worked after Export as QuickTime.mov
    • No QT-conversion
    • Not Selfcontained.
    Yours trying to remember Bengt W

  • Testing a PAL DVD

    I’ve used the Nattress: Standards Conversion filter for a current FCP project and it’s worked amazingly. I then used COMPRESSOR with the setting: "DVD Best Quality 90 min – 4:3" to create the MPEG-2 for use in DVD Studio Pro. I selcted PAL version and burned the DVD. Is there anyway to test if the burned PAL DVD is working properly, as I don’t have a PAL DVD player?
    I was shocked actually that the DVD played in my NTSC DVD player and on my Mac – is that supposed to happen or have I burned it incorrectly?
    I selected PAL in DVD Studio Pro so I don’t think that is the issue.
    Any suggestions?

    Indeed - but mixing PAL and NTSC on the same side of a DVD creates an 'out of spec' disc. In fact, other DVD tools used to claim to let you do the same - the early release of DVDLabPro on a PC heralded this mix and match as a feature, and in fact you could theoretically accomplish it I think, but I would have to wonder why you want to. DVDLabPro no longer allows you to, and I think it's probably wiser to stay within the DVD spec when creating discs that you want to be compatible
    Suffice to say that if you are using PAL assets, and have set DVDSP to be a PAL project then it will probably turn out as a PAL disc (or vice versa if you use NTSC)!

  • PAL-authored Final Cut Express project...how to burn to DVD for NTSC audien

    Not sure if this is possible...and through searching a few previous posts it sounds like it may require additional software...but what the heck, thought I'd ask anyway ! I operate in UK and have made several FCE movies for friends in the UK which I've burnt onto a DVD and sent to them as gifts. Now I want to do the same for a friend in the States, and I'm wondering how to go about the PAL>>NTSC issue. Would it be easiest to just take the PAL-dvd and pay somebody at Jessops etc to convert it onto a NTSC dvd for me? I don't mind paying a few quid for someone else to do it, especially if it would require me to go out and buy all kinds of software to be able to do it myself... But I'm worried about how the picture files, music, titling, special effects etc would come out. Anybody have any experience with this? Thanks.

    Not sure if this is possible...and through searching
    a few previous posts it sounds like it may require
    additional software...but what the heck, thought I'd
    ask anyway ! I operate in UK and have made several
    FCE movies for friends in the UK which I've burnt
    onto a DVD and sent to them as gifts. Now I want to
    do the same for a friend in the States, and I'm
    wondering how to go about the PAL>>NTSC issue. Would
    it be easiest to just take the PAL-dvd and pay
    somebody at Jessops etc to convert it onto a NTSC dvd
    for me? I don't mind paying a few quid for someone
    else to do it, especially if it would require me to
    go out and buy all kinds of software to be able to do
    it myself... But I'm worried about how the picture
    files, music, titling, special effects etc would come
    out. Anybody have any experience with this? Thanks.
    Toast 7.x is able to burn a PAL-project on a NTSC-dvd. In the preferences of Toast you can decide wether the output will be a PAL- or a NTSC-dvd.
    For friends in Brazil I burned a NTSC-dvd, but I still don't know if it works!
    Give it a try on a dvd-rw.
    iMac G5 2GHz & Powerbook 12 1.25GHz   Mac OS X (10.4.4)  

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • Need HELP FAST! Edited in FCP, need to burn a DVD of HD footage to SD PAL

    I have tried to read the threads and sort out my problem, but no luck. I really hope someone can help.
    Here's the gist....
    I show up for a rehearsal for an event I have to shoot tomorrow. They asked me to shoot something today. I shot and edited a 10 minute video in HDV, 1080i, using FCP. I now need a PAL DVD that they can play about 10 hours from now. I exported using Compressor (not sure if I specified any type of audio) using mp2v settings for PAL. I can see it in the simulation, but no audio. it will also not let me burn a DVD to even check if the audio is there, saying it doesn't even FIND the video or audio, even though the file size is almost 400MB.
    Any help or feedback would be GREATLY appreciated.
    Power Mac G5 using OS 10.4.11
    DVD Pro Studio 4
    Cheers.... but not here at the moment.

    Put your HDV timeline in a DV sequence.
    Export as a PAL DV (anamorphic 16:9)
    Drop that file in iDVD. The latest version should encode it as 16:9.
    Give to client.
    In the meantime, do some reading on this forum regarding the HDV to DV translation as well as start at the beginning of the DVD Studio Pro manual. There is a lot of useful information contained here and there that you need to master.
    Good luck,
    x

  • How do I burn a dvd using the PAL setting for Europe?

    This is an older answer:
    Make a new project in PAL using custom settings. Copy and paste the contents from the NTSC project to the PAL project. Render everything.
    Don't do this unless you really need to. If you're making a DVD for Europe you don't need to.
    And my question is:
    Why is it not needed to change it to PAL if this DVD is for Europe?
    Would it not be best to use a project with PAL SD 720x576 DV Anamorphic  25i  ?
    What's the difference between .... x756 DV  and  ... DV Anamorphic
    and also completely without this DV and DV Anamorphic?

    Level 10(109,395 points)Tom WolskyJan 9, 2015 5:22 PM
    Re: How do I burn a dvd using the PAL setting?in response to Totti 10Why is it not needed to change it to PAL if this DVD is for Europe?
    You don't, unless you want to have PAL resolution. Would it not be best to use a project with PAL SD 720x576 DV Anamorphic  25i  ?
    Yes, if you want a PAL resolution DVD. That's why the OP is asking how to make a PAL project. What's the difference between .... x756 DV  and  ... DV Anamorphic
    DV is 4:3. DV Anamorphic is 16:9. and also completely without this DV and DV Anamorphic?
    Not sure what this means. The DVD specification is the same as DV resolution. If the OP as an HD project that has a frame rate of 23.98, the output resolution will be NTSC DV anamorphic, because DVD only accepts 23.98, 24, or 29.97 frame rates in 720x480, not in the PAL resolution 720x576. That has to be in 25fps.
    Like Show 0 Likes(0)
    Reply
    JUst to add the reason you don't need to make PAL for Europe is because all PAL DVDs can play back NTSC. Unfortunately almost no NTSC players can play back PAL.

  • Burn a PAL dvd from ntsc project

    I have an NTSC project with all ntsc media and would like to burn a PAL dvd. what is the easiest way to do so. I converted the media to pal and was hoping to do a 'save as' on the dvdsp project and just change it to PAL but it won't except the media.
    thanks
    andy
    dvdsp 4, 2.7 dual g5.

    It makes sense that a PAL DVD project wouldn't accept media that's already compressed to MPEG2 in NTSC format. When the DVD is built, all it does is multiplex the audio/video. It doesn't change the compression or frame rate or size.
    You'd probably need to recompress the original edited source video in Compressor to PAL format. Once you select a preset in Compressor, you need to change the Video Format from Automatic to PAL. Select the preset and in the Inspector, click the Encoder section, then the Video Format tab. Then you'll see the Video Format popup menu where you can change it to PAL.
    One other thing to keep in mind: It might be a waste of time to convert it to PAL since most PAL DVD players can convert NTSC format DVDs on the fly during playback. I send NTSC DVDs to Hungary all the time and they have no trouble playing them with typical consumer PAL DVD players.

  • Is there a way to burn a PAL DVD in iDVD 4?

    I am in the US. I have an eMac from 2004. I am in iDVD 4. I am trying to make a DVD for my friend in Italy.
    Is there a setting I can use so that I can burn the DVD in PAL?
    Thank you for all your help,
    Evan Jacobs
    www.anhedeniafilms.com

    Just send the NTSC DVD (you can convert to PAL but it isn't necessary).
    http://www.danslagle.com/mac/iMovie/tips_tricks/6017.shtml

  • Can CS5 import from a PAL DVD, then burn a NTSC DVD?

    Hi, I've looked to see if PAL to NTSC has come up in the forum but couldn't spot it.  Has anyone taked the footage from a PAL DVD into CS5?  And is it possible to then send that footage to burn a NTSC DVD?  Thanks for any help!

    The footage will need conversion at some point, and PP may not be the best tool for that job.  Try the link below (but try it quick, it won't be up for long).  If memory serves, one of the options Dan set up was to convert between NTSC and PAL (or in your case, the other way 'round).
    http://www.dv2film.com/

  • How do I convert an entire PAL DVD to NTSC, menus and all?

    Hello everyone,
    I've been given a set of PAL DVD's which need to be converted into NTSC. Now, from my understanding, there is no one program available that can do this, so I've had to rip all the video tracks off, convert them to NTSC mp2's and author the DVD from the ground up in DVDSP, build a VIDEO_TS file, then use Toast to compress to a single layer DVD and burn. If anyone knows a program that can convert an entire PAL DVD to NTSC, that would be greatly appreciated.
    The next problem is that when I burn any of the DVD's and put them in a duplication tower (I'm not sure if that's the actual name, but it's one of those machines where you just put the original disc in the top drive and fill the other 8 or so drives under it with blanks), it says that the burn has failed. I have tried another duplication tower and end with the same result. One option I have not tried just yet is to change the brand of media I'm using to burn, but will do so next chance I get.
    I'm not sure if the two problems are related or not, but I just thought it would help.
    Thanks in advance.

    2 options.
    1) Best option - only available if you have the source material - Convert source material from PAL to NTSC using the Nattress standards converter.
    http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
    or the JES deinterlacer:
    http://www.xs4all.nl/~jeschot/home.html
    It's also possible to do this in Compressor but not as good quality and longer render times.
    2) If you don't have the source footage, you'll need to demux the file in MPeg Streamclip:
    http://www.squared5.com/
    then transcode the file as described here:
    http://discussions.apple.com/thread.jspa?messageID=1946985&#1946985

Maybe you are looking for