Burning/playback issues

The problem I am having is after burning the disc, the disc will only play in select G5's (not all the G5's in here) but not on G4's. I went through everything from: Select Build/Format, setting the destination for the VIDEO_TS and AUDIO_TS folders, then selecting the Output: DVDR Drive, etc, then going through the other tabs and setting them up accordingly, then select BUILD/FORMAT and it burns, to just hitting burn, to even saving just the AUDIO and VIDEO TS files to my hard drive and trying to burn it in toast and still the same problem occurs. Its not my computer because I have tried burning it on other computers to the same results. Some computers don't even recognize the dvd and spit it out before even mounting on the desktop.
The data itself is less than a gig total, they are all just quicktime movies, nothing special to them, didnt use compressor. Menus were made in photoshop.
So does anyone know what the deal is? Please help!
Thanks!
G5 Super drive, G4 ibook Mac OS X (10.4.6)

It "could" be the media. I have had similiar things happen to me when i tried to use crappy Maxell DVD-R's.
But just in case, here is a good workflow for authoring a DVD.
Edit footage in FCP (or other editing program)
Export out as a self contained .mov file. 48khz, 16 bit Stereo audio.
Open Compressor, encode with 7.4mbps max video, and Dolby Digital 224kbps max for audio. Do not use AIFF audio or mix aiff and ac3 in the DVD.
Author DVD. Check All Regions.
When ready to Build/Format, select Output: Harddrive
This saves a .img file to your drive.
Drag the .img file into Toast>Copy>Image
Burn DVD at lowest speed possible. 4X should be fine.
See how that goes.
If it doesn't work, then switch media.
I use Verbatim and Sony 8x or 16x and have very good luck.

Similar Messages

Burn/Playback Issue

Strange problem here:
Been burning DVDs of my short film using an image file made from DVD Studio Pro with no problems prior. DVDs I've burned today have begun to have problems:
The first was a playback freezing problem at or around the same spot on several DVDs but strangely not all of them
The second, and strangest to me, is that all these DVDs I've burned today do play on DVD players but none of them will play on my Macbook.
I tried replacing the original image file, which seemed to fix the first problem, but not the second.
Any ideas what the issue(s) might be??

What blank media are you using?

DVD playback issues

Hello all, have some questions I hope I can get answered.
I have been burning a number of bad discs lately, both out of DVDSP and out of Toast. I am running DVDSP 4.0.3 and Toast 6.1.1 on my G5 Dual 2 Ghz running 10.4.4.
What is happening is that quite often, the last chapter of the DVD will have playback issues in my set top DVD player where the picture freezes or it looks ike the color is breaking apart (I don't know the technical term for this).
It doesn't do it on every disc though.
I am using TDK DVD-R 8x and Memorex DVD-R 8x media and previously have never had a problem with either.
At first I thought I was starting to have a Memorex issue as it seemed to happen only on Memorex discs, but then it started on the TDK as well.
I have emptied the cache, run disk utility and disk warrior.
I burned one disc on memorex media that played fine in my computer, but not in my DVD player (a Sony), but DID play fine in another Sony DVD player.
I then burned the same disc on TDK media though, and it not only didn't play on my DVD player, it didn't play on my computer either, freezing up in the last chapter as always.
My drive is the SONY DVD RW DW-U21A, which I have considered replacing as 8x media is next to impossible to find and I'd like dual layer support.
my old burned discs play fine in my DVD player and SOME of the new ones I burn do too, but a lot of them do not. I don't think I have that many bad discs in the spindle.
Could BOTH my burner and DVD player be shot?
Anyone have any problems like this?
In a separate question, what is the Pioneer drive of choice to do 16x DVDs and also have the dual layer support and is it currently supported under Tiger or do I have to flash it on a PC? (I don't have a PC to do this on). I have heard the Pioneer ismuch better than the Sony.
Any help would be appreciated

For the stuff in DVDSP, it's happend on a number of projects, none of them longer than 90 minutes. Generally the target bit rate has been anywhere from 6.5-7.5 and the max is 8. I use ac3 audio at 192.
I've had issues burning disk images in toast though too with the same problem. They will sometimes play and sometimes not play. Once in a while I understand as you get bad discs, but this is like 40% of the time now.

DVD Playback Issues with Dual Layer media

I have been using DVDSP for years now, and have rarely had any issues with burning my final projects to DVD. Any playback issues have usually been issues with players and +or-R media.
I have recently upgraded to a MacPro, and have been really stoked about being able to burn to Dual Layer media. My previous G5 didn't have a DL burner.
I have a large project that fills most the disk, and everything seems great in the software, and when playing the media files on the computer. But when I burn to disk, I have huge issues with playback on different DVD players, computers, etc. I have stuttering with menu's, freezing, and stuttering with playback of video.
I read that the issue could be because of the speed I'm burning at in DVDSP, so I saved as a disk image, and used disk utility to burn at a 4x speed. This seemed to help, but when I got to the end of the movie I had huge issues with stuttering/playback quality. So I burned another copy from the same disk image, and it wouldn't even play in my DVD player.
When I open the Video_TS folder from the DVDSP Build, and play right off my hard drive in the DVD software player, I don't have any of these issues.
So I'm guessing my problem is either my DVD media I'm using, or the burners on this new computer. I've burned DVD's on both burners (yes I have 2) and I still have the same problems.
I am using Memorex DVD+R DL and they are 8x.
Can anyone offer me some advice here. I really wish I could just hit burn and have a disk work. DL media isn't all that cheap and I don't know how many coasters I can make and keep my sanity.

I used compressor and I used the DVD: Best Quality 90 Minutes setting. The bit rate is avg 6.2 and maximum 7.7. And yes I used ac3 audio.
When you say lowest speeds possible... shouldn't a burner that says it burns at a speed work at that speed? I'm cool with burning at a lower speed to get this thing to work, but why have a burner that burns DVD DL at 8x speed, when it doesn't work? Shouldn't it work? Why is it that it won't work?
If I get Verbatim DVD+R DL, can I burn at 8x speed with those?
When I burn in disk utility I used the "varify burned data" and everything checks out ok. So why do I have this issue. Just curious.

IPhone 5 music playback issues (after iOS 8 upgrade)

Hi,
After upgrading my iPhone 5 to iOS 8 I have had many playback issues with my Music. Songs randomly skipping or stopping without even doing anything are some of the issues. Also sometimes when I am listening to a song it would fast forward the music.
P.S. I don't sync my music, I just manually add content.
Is there any way I can fix this problem?
Thanks
L

My wife had something like this happen with her iPad. The problem was that the device had not been synced and so some file were not loaded on the device.
The way to correct the problem is to plug the device into the computer and tell it to sync.

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Weird Playback Issue...

I have this weird playback issue with iTunes for Windows. I am using Vista and I think the cause of the problem is that I am using MacDrive to access my OS X partition. But anyways, on with the problem. So the problem is that when I play a song, the song will play for like 5 seconds and then it will just go the next song. This song will do the same thing, and so-on and so-forth. Then, during this time, my Mac formatted hard drive is unavailable while iTunes is running. In "My Computer" the drive is there, but when I try to open it, Explorer freezes. Then, when I exit iTunes, it doesn't really exit. It still shows up in the task manager and when I try to end the process, it just plain doesn't end. I have to restart my computer to gain full use of it again. After the restart I can access my Mac disks, but once I start iTunes and try to play a song, I get the same thing again. And in case thats not weird enough, I can play the MP3's in WMP fine, and they will also play in iTunes fine if I actually open them, rather than just select them from my library. If I go to file open and select a song on my Mac drive, it will play fine, but then once I try to play a song from my library, I get caught in that vicious cycle. Anyone else had this problem or anything? Thanks. Also, is there an alternative program to Mac Drive that will allow me to read HFS partitions?

Post more about your situation... what format is the video, and where are you storing the video files? i.e., on a disk other than your startup disk? The adobe install is likely not the problem... I run adobe software along side FCS on about 75 workstations, and don't see issues like you describe.
Wavy? not accurate? what are you talking about?
Jerry

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

ITunes 10.6/Quicktime 7 1080p playback issue/frame skipping

I have a playback issue with the 1080p videos on the recent version of iTunes - 10.6. I also tried playing the same videos on Quicktime where I was able to find that the videos were playing at around 20fps as opposed to their normal rate - 24fps~25fps.
I seem to barely meet the 1080p playback requirements on iTunes, but I know that I'm able to watch 1080p videos on Window Media Player(WMP) 12 without any issues. Aside from WMP, I'm able to watch 1080p videos on Youtube whenever hardware acceleration is enabled. I assume that WMP utilizes hardware acceleration as well.
The playback issue/frame skipping is probably caused by iTunes 10.6 not using hardware acceleration.
Windows Hardware
PC with a 1GHz Intel or AMD processor and 512MB of RAM
To play Standard Definition video from the iTunes Store, an Intel Pentium D or faster processor, 512MB of RAM, and a DirectX 9.0-compatible video card is required
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor, 1GB of RAM, and an Intel GMA X3000, ATI Radeon X1300, or NVIDIA GeForce 6150 or better is required
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD; ATI Radeon HD 2400; Nvidia GeForce 8300 GS or better is required
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
16-bit sound card and speakers
Broadband Internet connection to use the iTunes Store
iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
My PC specs:
Pentium Dual Core 2.3 Ghz
2GB DDR3
Intel GMA X4500MHD

Bump! Sounds the same as my problem, but maybe no one but us are having the issue since no one will answer any of my posts

WINDOWS VISTA ITUNES VIDEO PLAYBACK ISSUE!!!!!! AAHHHHHHH!!! HELP!!!!!!!!!!

am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.

hi slideaway!
my computer has a right proper meltdown, switching itself off and restarting to a "Windows has recovered from a serious error" sort of message.
good lord. are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

ICanon C100 playback issue premiere pro cc 2014

I am having playback issues in Premiere Pro CC 2014 with footage shot on my Canon C100 (29.97 fps). It was happening after doing a straight import and creating a sequence using "new item". Then, after reading some other threads here and elsewhere, I interpreted the footage so premiere would see it as progressive (no fields) rather than interlaced, but that doe not seem to help. It is even doing it when I play at 1/4 resolution. The only solution seems to be to quit and restart and reopen the project. Then it works temporarily for a little while but not long enough to actually edit. I have done projects in Premiere with C100 footage in the past and have not experience this level of difficulty.
My Media Cache is not going to the startup diskc(it is gong to the right place)
I am on a Mac 2.66 Ghz Quad-Core Intel Xeon
OS X 10.8.5
10GB 1066 MHz DDR3
NVIDIA GeForce GT 120 512 MB
Please help - very frustrated. If the solution is to transcode, it sort of kills the value of premiere in many ways.

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

Video playback issues in Air for Android

Hello everybody
I am developing an advertisement application which plays multiple videos. I have faced a very strange problem: nor the simple Video nor the StageVideo are not visible when I run the app on target android device. I can hear the audio but the only way to get the video is to press back button and then get back to app but in this case the video goes over the UI. This happens only on a target device which is a chinese sibo android tablet. It has android 4.1 on board. I have seen a lot of people had the similar issues:
http://forums.adobe.com/message/5429125
but the solution mentioned there - adding <containsVideo>true</containsVideo> to the manifest xml doesnt help
I am using adobe air 4.0 sdk and the air 4.0 runtime on the device. I have tried to change renderMode to CPU/Direct/Auto but it doesn change anything.
The other three android devices I have - toshiba thrive tablet(4.0.4)/ eken tablet(4.2.2)/ htc desire c(4.0.3) play all the video content without any problem.
Any advice will be highly appreciated,
Max

Hi, Chris,
I think this issue: Bug#3832525 - [Android] Video + Stage3D = Video don't work but sound continue playback
Also there is many critical video playback issues:
Bug#3759420 - [Platform_Windows] GPU accelerated video stop playing when screen resolution changes after NetStream.Buffe…
Bug#3810201 - [Android] H.264 video rotating problem
Bug#3503389 - [Platform_Android]StageVideo attachCamera()
Bug#3802932 - [iOS] Video stops playing
Bug#3840986 - [iOS] Simple Video object doesn't work with H.264 (MP4) videos
Bug#3779843 - StageVideo + NetStream + Starling = R6025 Error
Bug#3626740 - H.264 playback conflicts with Stage3D (Android)
Bug#3832327 - [Android] NetStream decodedFrames don't work
Bug#3832141 - Video is not working if you seek on NetStream.Play.Stop and have a bufferTime
Bug#3810979 - AIR on iOS: Using StageVideo makes 2D Display objects opaque/black over Stage3D
Bug#3578045 - new Video() android black screen
Bug#3703836 - Black screen on Samsung Galaxy S4 and Nexus 7 device
Bug#3837870 - [iOS] StageVideo + Stage3D = video not displaying but sound playback
Bug#3840983 - [Android] Returning from Alarm Clock causes black screen when using Video with GPU acceleration
Bug#3840999 - [iOS] [Android] Turn off screen at NetStream.Buffer.Flush causes video not work or crash with some videos
Bug#3844059 - [iOS[ Switching between multiple NetStreams not work
Bug#3773944 - Video view top at android 4.3
and more
All of these problems very important for our business. Often we cannot create stable AIR applications when we need to use videos.
Could you force for faster fixing these issues?

Playback issues - squishing in Premiere CC

Hey All,
So I've run into this problem a couple of times. In the past, it has just sort of fixed itself, but now I'm having it again and want to know how I can fix it. I have a sequence that's been edited and rendered, however, during playback, the image gets squished in the playback window. If I stop playback, the image returns to normal (1920x1080 in this case). I found in past sequences that if I turn off my transparent layer that includes timecode, usually the playback is fixed. That is not the case with my current sequence though. Below is a screenshot of the playback issue along with my sequence settings:
I've noticed that if I take away any effects, like color correction or cross dissolves, and return the footage to it's "raw" form, playback will work fine. Obviously, that can't be done though...since I have dissolves and slides and whatnot involved with the cut. In the screenshot above, the cafe picture is composed of 3 layers (via Photoshop) on top of the video clip. I have also tried deleting all of my render files and restarting Premiere.
I'm working on a Mac (10.7.5) out of Premiere CC
Any help would be GREATLY appreciated.
Thanks guys!
Hugo

Exactly what version of PPro CC are you on? If you're on CC7.1, then you're probably hitting the issue discussed in this thread: http://forums.adobe.com/message/5828335?tstart=30#5828335. That issue (which was specific to playback resolution being set to 1/4) was fixed in 7.2.

[bug?] playback issues with QT browser plugin, any workarounds?

I've noticed a playback issue with media files using the quicktime plugin (currently v7.1.3) with Firefox 1.5.0.x and now Firefox 2.0 on Windows XP (SP2):
Description:
When I open a media file in a separate tab or window, audio playback cuts out when I switch focus away from the tab or window (i.e. when it runs in the background). When I put the tab/window in the foreground again, playing resumes.
Reproducible: Always
Steps to Reproduce:
1. Open an mp3 file with quicktime plugin in a new tab
2. Switch focus to some other tab or firefox window
Expected Results:
Audio playback should continue in the background.
Actual Results:
Audio playback cuts out and resumes once you click on the tab containing the plugin or if you hover over it with the cursor. The cutting and resuming out doesn't happen right away but after a short delay, suggesting that it might have something to do with thread prioritization.
The file is completely buffered by quicktime, this is not about connection speed or bandwidth issues.
Opening the link to the same file with right-click->Open Link in External Application works well.
Someone else has filed a bug report against Firefox about this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=339449
I wouldn't be surprised if this turns out not to be an issue with Gecko but with QuickTime.
Can other users confirm this on XP? Is this a known QuickTime bug? Are there fixes or workarounds?
Windows XP

Yeah I had that thought as well but no joy. It works for the player but it doesn't solve my plugin problem. It really seems to be something about prioritizing, the way the audio cuts in and out - notice how it takes a few fractions of a second before a process loses its CPU cycles when you click away from it? You can observe this with System Monitor on the Mac or Linux or process explorer on XP. That's how the audio is cutting out and back in. I still think it's probably a bug/'feature' either with Gecko, the Firefox browser engine, or with the QT plugin..

Movie playback issues

My movies are having playback issues again. Default settings are 44.1kHz 16bps 720p HD.
Operating System: Windows 8
Itunes Version 12.1.0
The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

Burning/playback issues

Similar Messages

Maybe you are looking for