Burning Preparation Error

I am trying to burn a second DVD that I had created several weeks ago and had successfully burned. After putting in my blank DVD, I get the "Burning Preparation Error, Not enough free disk space for encoding remaining assets." Suggestions?

Try making a disc image first to the desktop and then use apple's dvd player to test playback. Assuming all goes well, now burn the image to Verbatim Dvd-R and do not exceed 4x.
Hope this helps but if not just come on back.
Click Here
Message was edited by: SDMacuser

Similar Messages

HT2936 burning preparation error: not enough free disk for encoding the remaining assets

Im ready to burn my movie to a dvd and this message appears, "Burning preparation error: Not enough free disk space for encoding the remaining assets." What does that mean or what do i have to do?

Hi
The free space on Your Start-Up (Mac OS) Hard Disk (often named Macintosh HD) is near to full and iDVD and Mac OS needs lot's of space for their temp files. This can not be addressed to other devices - at all. It must be here.
I never let it go less than 25GB free space.
To free up space You need to
• trash files You NEVER need any more
• copy needed material to an external hard disk
(If from iMovie - THEN DO NOT - move or alter any folder named
- iMovie Event's - or -
- iMovie Project's
on DeskTop/Finder ! )
ONLY - within iMovie Application
ONLY to an external Hard Disk formatted as - Mac OS Extended (hfs) (mine are journaled) and I use FireWire ones as USB/USB2 performs badly - especially when filling up and if HD-Material is used.
UNIX/DOS/FAT32/Mac OS Exchange - works for most other things BUT NOT FOR VIDEO
How Much free space do You have ?
Yours Bengt W

I have an a burning preparation error that says Not enough free disnot k space for encoding the remaining assets. Is this because i don't have enough memory on my macbook?

i have a burning preraration error that says not enough free space for encoding the remaining assets. Is this error on my iDVD coming up because i dont not have enough space on my macbook?

thank you

When attempting to burn a 1.2GB video using Magic DVD I get Burning Prep error. Not enough free disk space...... I have tried all I know to no avail. This have just started!!

When attempting to burn a 1.2 GB video using iDVD I get a "Burning Preparation Error.. Not enough free disk space for encoding the remaing assetts" This has only justed started to happen. I have used this programme many times before in the past. Can any one help as I have tried all I know?

Yes, 44GB is sufficient. I don't think space is the problem. I don't know about iMovie but iDVD can only use the boot drive for its scratch disk.
You might be getting that error due to some damage file in the project.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Also run Disk Utility and verify the disk. If errors are indicated you will need to boot iknto your system install disk and repair the disk with Disk Utility (see the Utilities menu in the first window after the language selection window).

Multiplexer preparation error message

After transferring my iDVD 3.01 app from one G4 to another, I have prepared files on that machine for creating a DVD. When attempting to burn, I get an error message: "Multiplexer preparation error: Not enough free disk space for encoding the remaining assets"
This is puzzling, as the sole movie file is 11 GB and it resides in a partition with nearly 10 GB of remaining space available. I tried deleting the file from the iDVD project and moving the file to an empty 38 GB partition and then reimporting it to the project - same message.
I should add that as there is insufficient space on the Mac HD (startup disk) I have installed the 1.+ GB iDVD app on the aforementioned partition, as well as the project files. The 2nd G4 is old, and the startup disk is only 20 GB, though of course I've since added more and larger internal disks.
Any help appreciated,
Keith

After transferring my iDVD 3.01 app from one G4 to
another, I have prepared files on that machine for
creating a DVD. When attempting to burn, I get an
error message: "Multiplexer preparation error: Not
enough free disk space for encoding the remaining
assets"
That's pretty clear isn't it? Not enough free space. Creating DVDs requires LOTS of free hard disk space!
This is puzzling, as the sole movie file is 11 GB and
it resides in a partition with nearly 10 GB of
remaining space available. I tried deleting the file
from the iDVD project and moving the file to an empty
38 GB partition and then reimporting it to the
project - same message.
Did you recreate the iDVD project in the larger partition? It's probably presently stored in the Documents folder on the boot partition.
I should add that as there is insufficient space on
the Mac HD (startup disk) I have installed the 1.+ GB
iDVD app on the aforementioned partition, as well as
the project files. The 2nd G4 is old, and the
startup disk is only 20 GB, though of course I've
since added more and larger internal disks.
Mac OS X likes to have from 10% to 15% of a hard disk kept free for OS use ( I assume this means the partition that contains the OS).

"Multiplexor preparation error" URGENT

I'm trying to make a DVD and whenever I burn it this message keeps popping up saying "Multiplexor preparation error: Not enough disk space to encode the remaining assets."
So I check my data drive and it says 75.33 gb available. I check my Macintosh HD drive and it says 62 gb available. Then I check my external hard drive I'm using and it says 84 gb available. So I'm really confused. I have to get this DVD done today so please answer ASAP! By the way, the DVD is about 95 minutes long.
Message was edited by: viickymouse

Welcome to Apple Discussions,
1.) Make sure the iDVD project you are using is on your internal hard drive, not an external. If it is on an external drive, open the project in iDVD and go to File > Archive Project and save to some place on the internal hard drive (Like Home > Documents or the Desktop). Then close iDVD and open up the Archived project and try again.
2.) Ensure File Vault is not on. If it is,
Backup your computer: http://support.apple.com/kb/HT1553
and turn it off: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8738.html
3.) Safe Boot the computer: http://support.apple.com/kb/HT1564 and then restart the computer and try burning again.
Hope that helps

Receiving cancelling burning disc error 4420

I used to be able to burn discs from iTunes. Now a few seconds into burning it stops and I receive a message saying "Burning disc cancelled, error (4420)" and the disc pops out.
Any suggestions how to resolve?
Thanks,
Don

Hey!
I am having the same frustrating problem. I have run the diagnostics....any thoughts????
Trying to prepare music for a wedding, time is running out!!!! Yikes!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4550
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 420
Connected Device Information:
Disk drive, WDC WD600BB-75CAA0, Bus Type ATA, Bus Address [0,0]
CD-ROM Drive, HL-DT-ST CD-RW GCE-8481B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST CD-RW GCE-8481B, Rev C102
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16 24 32 40 48.
The drive CDRW speeds are: 8 12 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST CD-RW GCE-8481B on CDR media at speed 16X.

ERP6 upgrade, PREPARE error

Hello!
Have anyone seen this PREPARE error message before?
During phase RUN_RSPTBFIL_PREP, error message "2EETG011 Kein Upgrade aktiv".
I can't find any SAP note about this specific problem. The source system is 4.6B, the target will be a non-unicode ERP6 SR3, the os/db is AIX53/ora102.
//Fredrik
root@serverX:/usr/sap/put/log:more RSPTBINI.LOG
1 ETQ201XEntering upgrade-phase "RUN_RSPTBFIL_PREP" ("20080923124421")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ010 Date & Time: 20080923124422
4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_PRP_PUTTB" in batch
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSPTBFIL" with job count "12442401" scheduled
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20080923124428
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ399 ext. env.: DIR_LIBRARY=/sapmnt/SNB/exe
4 ETQ399 ext. env.: LIBPATH=/sapmnt/SNB/exe:/usr/lib:/lib:/usr/sap/SNB/SYS/exe/run:/oracle/SNB/102_64/lib64
4 ETQ399 2008/09/23 12:44:29: put_execute: (tp) forkpid:2142240
2EETQ241 Errors found in logfiles - accumulated in file "RSPTBINI.ELG"
1EETQ203 Upgrade phase "RUN_RSPTBFIL_PREP" aborted with errors ("20080923124430")
root@serverX:/usr/sap/put/log:more RSPTBINI.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB initial filling ERRORS and RETURN CODE in RSPTBPTB.SNB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETG011 "Kein Upgrade aktiv"
2EETG011 "Kein Upgrade aktiv"
root@serverX:/usr/sap/put/log:

Hello Andreas, old friend from e-motion technology!
I did open a OSS-case some days ago, and we rerun the phase successfully.
I'm now waiting to hear from SAP-support, what they did, with their magic sticks, to fix this issue.
//Fredrik

ERROR: ORACLE prepare error: ORA-00936: missing expression

Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153           biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163      )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184

Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date       Programmer         Reviewed By     WHAT WAS DONE;
24 *-----      --------------     ------------    -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155      BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM

Burning disc error

i have tried updating drivers and windows (xp sp2), reduced writing speed to 8x, udpated itunes, using cd-r and i STILL get an unknown disc error occurred-cannot be burned. here are diagnostics
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCG-K35(UC)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.1.1.48),
UpperFilters: Cdralw2k (6.1.1.48), pwd_2k (6.1.1.48), GEARAspiWDM (2.0.6.1),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
RADEON IGP 345M
ATI MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH11), Bus Type USB
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: SONY DVD RW DW-D56A, Rev PFS3
Audio CD in drive.
Found 15 songs on CD, playing time 58:28 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:20
Track 3, start time 08:40:40
Track 4, start time 12:30:63
Track 5, start time 16:19:25
Track 6, start time 20:16:08
Track 7, start time 24:28:00
Track 8, start time 27:49:71
Track 9, start time 31:58:43
Track 10, start time 35:59:36
Track 11, start time 39:54:44
Track 12, start time 43:31:33
Track 13, start time 47:20:59
Track 14, start time 50:42:43
Track 15, start time 54:29:64
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 12 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SONY DVD RW DW-D56A on CDR media at speed 24X.
please help!!

I tried 3 discs, finally getting it to burn.

Burn CD - Error 2122 - Please Help!

Updated drivers for CDROM, Graphics card, etc. all this evening. No luck. I get an error out right after it checks the files to be burned - Unknown Error 2122, and it ejects the blank CD.
Stats below...thanks for any advice.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X800 Series \RADEON X800 Series
IDE\DiskMaxtor6B120M0_________________________BANC19J0, Bus Type ATA, Bus Address [2,0]
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [2,0]
IDE\CdRomAOPENDUW1608/ARR_______________________A110___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: AOPEN DUW1608/ARR, Rev A110
Media in drive is blank.
Get drive speed succeeded.
The drive CDRW speeds are: 0.
The drive DVDR speeds are: 0.
The drive DVDRW speeds are: 0.
The last failed audio CD burn had error code 2122(0x0000084a). It happened on drive D: AOPEN DUW1608/ARR on CDR media at speed 0X.

Many of us have posted and experimented and tried everything mentioned here all to no avail in regards to the 2122 error code. And don't let anyone tell you it's YOUR problem--it's not the AOpen drive that's bad-it's that iTunes is NOT working with or doesn't recognize the AOpen burners.... I've gotten a few replies from Apple people and they even say the same thing....
personally I think it's really SAD AND STUPID that this big company can come up with all sorts of new products, pods, nanos etc and yet can't come back and fix the programs for the people that already bought their original products!!!!
HOW HARD can it be to fix a little thing like this??? I don't honestly know -I am not a programmer--but if this many people have complained, wouldn't it be nice if someone would just ADRESS THE PROBLEM??? And then so many of us wouldn't be sitting here fuming, hoping each time they come out with a new upgrade that MAYBE this time it'll work---rather than to be disappointed over and over again and see the same fricking 2122 error....Don't you think fixing something first would be nice instead of just making more newer faster smaller things??

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

CD burn had error code 4280, HELP!!!

I installed the latest version of iTunes, but as many other postings I've read, I have not been able to successfully burn a CD with iTunes since the installation. Every time I get the message, "The attempt to burn a disc failed. An unknown error occurred (4280)." I have used Device Manager in the Control Panel to try and update the driver for the CD-ROM, but Windows says it cannot find a better driver than the one I have installed. I also ran CD Diagnostics in the iTunes help menu and the text is attached below:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
VIA Technologies, Inc. KM266A-8235
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: S3 Graphics Inc. Savage4\S3 Compatible Display Adapter
IDE\DiskST3120026A_____________________________8.01___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomCD-ROMCMD5X11__________________________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTDKCDRW121032A_________________________1.00___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: CD-ROM CMD5X11, Rev 1.06
Drive is empty.
E: TDK CDRW121032A, Rev 1.00
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TDK CDRW121032A on CDR media at speed 12X.
PLEASE HELP ME!!!!!!!!!!!!!
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001

bump2.

HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

Burning Preparation Error

Similar Messages

Maybe you are looking for