Burning problem-crashing part way through

I am trying to make an HD DVD with 6 movies and a menu.
It runs OK simulated but when I try to burn the disc it always crashes out .
I am puzzled by each movie having two audio tracks after passing them through Compressor set at HD DVD H.264 60 mins. After importing into dvdsp each movie has an AC3 audio and a Quick time audio with the QT H.264 video. Which should be used??
The part finished _TS file contains .EVO files. Are these the files that 'burn' uses?
Confused.com
Keith

HD DVD discs will only play on HD DVD players, Macs and some Xboxes, it is a format that has gone to the great beyond and will not play on most things.
Try using the high end HD m2v and aif files for encoding if you are making HD DVD, that seemed to cure some ills when trying to make a HD DVD. .EVO and the rest will get burned to the disc

Similar Messages

  • I have just tried to upgrade to the latest version of itunes, and my ipad was connected to my computer at the time. The upgrade crashed part way through. I now cannot start itunes as it says MSVCR80.dll is missing. Anyone got any ideas?

    I was upgrading to the latest version of itunes, and my new ipad mini was connected to my computer at the same time, try to sync for the first time. The upgrade crashed part way through, and now itunes won't load and I get an error message saying MSVCR80.dll is missing. How do I do about reinstalling this file?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99792)

  • Recovery mode crashed part way through

    I installed an update on my iphone 5 this morning, and then it showed me the screen with the itunes app and the plug in cord.  I plug it into my desktop and it goes into recovery mode but crashed part way through. HELP!

    Hi JILLYPAW,
    I apologize, I'm a bit unclear on where you currently stand with your issue. If, after the crash during the recovery mode restore, your iPhone is now no longer responding or starting up, then you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If it is responding but you are unable to update or it has gone back into Recovery mode, then this article may be more useful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    And if you are able to start the restore but it gives you an error message partway through, then you should take a look at this article:
    Apple Support: Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Regards,
    - Brenden

  • When syncing Outlook to Pearl it crashes part way through.

    Am using windows Vista business. I was using software version 4.3 and when trying to sync to my pearl it crashed with no message. Just program stopped working and had to close it. Once I received error code 0x8004fd30.  I upgraded to version 4.5 it crashed even sooner always giving the message "Error encountered. Error code - x8004fd30. Check documentation"
    I can't sync my Pearl at all now. Any help would be very much appreciated.
    Tom

    I found this article. Not the same error code, but it's close: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14818&sliceId=SAL_Pub...
    To confirm if it's the Address Book causing the issue try opening Desktop Manager and going into Synchronize. Can you uncheck the Address Book option and manually sync to see if it completes? If so they try what the above article suggests
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • I have successfully downloaded Photoshop but Lightroom crashes part way through installation

    The error code it gives me is 1603. Can anyone tell me how to get past this? Thanks.

    Hi DRuske39,
    Please check the KB : http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html
    You might also want to refer : http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • HT1583 sound stops part way through on burned idvd, but ok on computer edit.

    Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
    is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
    be disc failure.
    Appreciate any comments please

    Hi
    FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
    In iDVD - Before Burning the DVD DO !
    Save as a DiskImage
    Double click on this .img icon
    test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
    THEN
    • DVD Brand - matters
    • DVD type used - matters
    • BURN SPEED - matters
    • Audio file format - matters
    WHAT did You use
    I only use
    - Verbatim
    - DVD-R SL
    - x2 max x4 - Best / High - IS NOT BEST
    - .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
    Yours Bengt W

  • How do I continue a migration from iPhoto to Photos that was interrupted part way through?

    I began a VERY large migration (40k+ photos) from iPhoto (v9.6.1) to Photos on an external hard drive.  I have a MacBook Pro with Yosemite 10.10.3 that is connected to a network that has a Synology network drive.  The iPhoto library is on that drive and I was wanting to create the Photos library also on the drive.
    The process was very slow and has taken days, but that is expected and it was definitely making progress (I could see the files being added over time). Unfortunately, the transfer was interrupted part way through (my kid closed my laptop, which disconnected it from the network). I tried to start it over with the partially created Photos library folder as the destination, hoping that it would pick up where it left off.  It worked until it reached the same files that were previously created. The migration stopped at that point, and the following error appeared: "Photos was unable to make a copy of your library before preparing it. There were file system or hardware issues…”  I assume the inability to overwrite previous files with the same names was the case of the "file system or hardware issues."
    Is there any way to either continue the migration from where I left off, or maybe even manually move the rest of the files over? Or do I have to wipe out the entire partially migrated Photos library and start over?

    You probably will have to start over
    And I suspect that you are incorrect - as far as I know NO NAS is formatted Mac OS extended - A NAS is basically a Linux computer with no display or keyboard that uses a Linux format drive - a headless computer
    Unless you have a directly connected drive correctly formatted you are cgoing to continue to have issues - your photos and your choice what risk you put them at but you are treading in very dangerous water with you set up - is it documented not to work and similar set ups have been reported here hundreds of times as causing major problems and losing lots of stuff
    LN

  • Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    A couple of months ago, I went to the Apple Store to try and sort this problem out. I was told that I was not playing my songs out of an actual music library. I created a library and loaded all of my songs, movies, etc. onto it. I had found that when I synced my songs from the new library onto my itouch, the songs no longer stopped in odd spots or bled into each other. To ensure that most of my songs had been fixed, I played the ones that were the most problematic. Fortunately, the songs play all the way through without any interruption. So far, I have not encountered the same problems that I had posted in my question. I apologize for not knowing the fellow's name who helped me with my iTouch at the Apple Store, but I would like to say how thankful and happy I am now that my iTouch no longer skips to the next song.
    I know that other people have had this same issue with their iPods. If you encounter your music not playing correctly, I would suggest that making a new library and  loading all of your music into the new one may help correct the problem. I hope that this helps.

  • My L7680 intermitently prints gibberish part way through pdf documents.

    My printer has recently strated to intermitently print gibberish part way through a pdf document.  It happens most often if the document is long, eg more than ~5 pages or if I send several pdf documnets to the print queue.  If I resubmit the document for printing, often it comes out OK or it goes wrong later in the document.
    I'm running Windows XP and I access the printer through a BT HomeHub wireless.  I've tried reinstalling the drivers, resetting the HomeHub and running the HP Diagnostic software with no joy (the latter found no problems).  The problem does not seem to occur when printing Word documents.
    I hope someone can help.

    There have been reports of Vista not working well with older networking equipment.  Here's a link to a Microsoft note on this subject.
    I also have a couple of other questions:
    When the printer stalls, can you ping the printer from the PC?  Can you access the printer's internal web page by browsing its IP address?
    How is the PC connected to your network (wired or wireless)?
    Are there other wireless devices on the network besides your PC and your printer?
    When the printer stalls, can you still browse the internet from your PC?
    Regards / Jim B
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Swf stops part way through in browser

    my swf stops part way through when in the browser always at
    the same frame...in flash it plays fine...here's a link to the web
    page...
    http://www.karlyoder.com/wiredchemi...r_symmetry.html
    and here's a link to the fla (it was too big to attach)...
    http://www.karlyoder.com/wiredchemi...r_symmetry3.fla
    also, when right-clicked it says movie not loaded...

    Hi,
    Try following the steps below and check if that may help:
    - Open the HP software by clicking the HP Envy 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
    - Click the Network tab.
    - Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
    - Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
    *Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
    - Click the HP Envy 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
    - Type the manually configured IP address, click on Save and confirm.
    - Open the control panel and go to Devices and Printers.
    - Right click the HP Envy 5530 icon and select Printer Properties.
    - Open the Ports tab.
    - Click the Add Port button, select Standard TCP/IP and click on New Port.
    - Follow the steps by typing the manually configured IP address and confirm the changes.
    Now try printing and check if the issue been resolved.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    Thomas A Reed wrote:
    You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
    FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
    Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
    Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
    This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

  • Trying to load my Photoshop CS3 onto new Mac Book Air. Why does it ask for InDesign CS4 part way through?

    Loading my Photoshop CS3 onto new Mac Book Air. Why does it ask for InDesign CS4 part way through?  I have a CS5.5 disc. Will suffice?

    that doesn't make sense.  you will only be prompted for earlier adobe versions when installing a latter upgrade version.
    double check your versions.
    also, you might want to clean your computer before retrying to install, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Audio disappears part way through avi file

    I have imported an avi file into a new CC project.
    Video stream:
    Codec: DV Video (dvsd)
    Resolution: 720x576
    Frame Rate: 25
    Decoded format: Planar 4:2:0 YUV
    Audio Stream
    Codec: PCM S16 LE (araw)
    Channels: Stereo
    Sample rate: 48000 Hz
    Bits per sample: 16
    PC is running Windows 8.1 and is running CC 7.2.2 (33)
    The file itself runs for 43 minutes and is 5.4 Gb in size
    When editing the file 25 minutes in the audio disappears completely and is gone for the rest of the clip.
    I have checked the file in VLC and the audio is present throughout the file.
    I used Avidemux 2.6 to split off from the main file about 10 minutes of data where there was no audio within Premiere.
    I imported that new file into Premiere and the audio is present in the new file.
    I can therefore use that but don't know what is wrong with the original file.
    The list of codecs installed on my PC are:
    Video:
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Cinepak Codec by Radius
    cvid
    iccvid.dll
    1.10.0.12
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.3.9600.16384
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.3.9600.16384
    ICM
    Microsoft Video 1
    MSVC
    msvidc32.dll
    6.3.9600.16384
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.3.9600.16384
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.3.9600.16384
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
    wmvdecod.dll
    6.3.9600.17031
    Type
    Name
    Format
    Binary
    Version
    ACM
    Microsoft GSM 6.10 Audio CODEC
    0031
    msgsm32.acm
    6.3.9600.16384
    ACM
    Microsoft CCITT G.711 A-Law and u-Law CODEC
    0007
    msg711.acm
    6.3.9600.16384
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    l3codeca.acm
    1.9.0.401
    ACM
    Microsoft IMA ADPCM CODEC
    0011
    imaadp32.acm
    6.3.9600.16384
    ACM
    Microsoft ADPCM CODEC
    0002
    msadp32.acm
    6.3.9600.16384
    ACM
    Microsoft PCM Converter
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.3.9600.16384
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.3.9600.16384
    Any suggestions of where to start?
    Thanks

    Thank you for the information.
    I have read the source patching article and watched the video too.  Very interesting and an impressive function.
    I did also look at the Audio Conforming link a lot of which I didn't understand; I think though I did try what was suggested regarding XMP stuff although it did not make any difference with the file I had the issue with.
    My problem is that the audio just stops part way through the clip.
    I have reduxed into a new file all the audio/video from the original file from just before the audio disappeared and that seems to work OK.  Perhaps there is an issue with my original file.
    It doesn't help that I have a brand new PC and this is the very first video I have edited in Premiere CC as I had previously been using CS4 and even then I haven't used that for a while.
    Anyway, thank you for your help and I will see how I get on.

  • Hi, We start to list items on ebay, part way through the system throws us out

    Hi, we have problems with Apple & Ebay, we start to list an item to sell , get part way through & Ebay asks us to sign in repeatedly!, Ebay say it's an Apple problem, Apple say it's down to Ebay, ARGHH!, please help?

    Try a different web browser*:
    http://www.macmaps.com/browser.html
    If a different web browser works, it sounds like something is affecting either browser cache or cookies, or the keychains that are you are running on your system.

  • Time Capsule Failing Backup Part Way Through

    My TC is constantly failing backup part way through but only when I'm backing up my MBP.  It finishes fine when backing up my iMac.  The solution proposed in the error message, to repair backup disk via Disk Utility, doesn't work as the Airport/TC doesn't appear on Disk Utility.
    I can see the TC via Airport Utility and it all looks to be working fine.  I have a external HD attached to the Airport and can access that fine.
    Any ideas as it's now a while since I've been able to back up.
    Thanks

    The solution proposed in the error message, to repair backup disk via Disk Utility, doesn't work as the Airport/TC doesn't appear on Disk Utility.
    Unfortunately, the error message leaves out some details, things like the fact that you have drag the sparsebundle file containing your backups into the Disk Utility window to repair them. More info from the great Pondini is here:
    http://pondini.org/TM/A5b.html
    If you run Repair Disk several times and problem continues, the only real option at that point is to erase the Time Capsule disk and start over again with backups.

Maybe you are looking for