Burning problem...not even an error message
Ok I select my desired playlist...then I hit burn disc and the prompt pops "insert a blank disc". I put in a Fujifilm CD-R All purpose Compact Disc Digital Audio Recordable CD in, it says "detecting media" for about 45 seconds...then it just stops and nothing. Whats going on? Will someone plz help.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 ER908AA-ABA A1477C
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
ATI RADEON XPRESS 200 Series
Connected Device Information:
DiskDrive, SAMSUNG SP2504C, Bus Type ATA, Bus Address [0,0]
DiskDrive, Generic USB CF Reader USB Device, Bus Type USB
DiskDrive, Generic USB MS Reader USB Device, Bus Type USB
DiskDrive, Generic USB SD Reader USB Device, Bus Type USB
DiskDrive, Generic USB SM Reader USB Device, Bus Type USB
CDROM, HL-DT-ST DVDRRW GSA-H21L, Bus Type ATA, Bus Address [0,0]
CDROM, TSSTcorp DVD-ROM TS-H352C, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: HL-DT-ST DVDRRW GSA-H21L, Rev L602
Drive is empty.
F: TSSTcorp DVD-ROM TS-H352C, Rev HP02
Drive is empty.
Similar Messages
-
Hi there, got 3 issues at once....
1) can't download the latest itune version onto my PC (it simply stops, not even an error message)
2) can't access the itune store and in order to fix this i need the latest version - catch 22!
3) one of my ipods isn't recognised by itune, nit sure if because of the earlier problems?
.... thanks
S.Hello SAB7700,
This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
ITunes 7.1 will not open! Not even an Error message!?!?!?
Hey, this problem is getting REALLY frustrating. I've done absolutley everything that i can think of, even some of the things that you guys have thought of on other posts, but nothing. Every time I click on the iTunes links it looks like its thinking, i get the hour glass etc, and then it just stops doing anything. iTunes does not open I do not get an error message of any kind and I would really like to use iTunes soon. I've tried repairing the installation I've tried completely removing iTunes and Quicktime and then reinstalling and still it does the same thing, it hasn't worked since I installed iTunes 7.1 . Whats going on here, can someome please help me out?
Thank You,
TylerSuch a pesky problem that is! Anyway, start with looking over this: http://docs.info.apple.com/article.html?artnum=93976
I would look to see if Quicktime opens and works before you do anything because iTunes will not work without Quicktime. Quicktime may be broken. If so, you can download the Quicktime stand alone player.
I would use the Windows Clean Up Installer Utility to remove all references of iTunes and Quicktime on your PC. You can read about it and install it from here: http://support.microsoft.com/kb/290301/
I would also run a full spyware scan because certain versions of malware has been known to cause this issue that you have. If you don't have such a program, I would go get AVG Free anti-spyware. It's free and catches that spyware program and removes it.
Then I would try the install again, but save it to your hard drive and install it from there instead of running it over the net. Sometimes turning OFF your antivirus and spyware programs first helps. Sometimes they like to silently interfere with the successful download and install of iTunes believing its some sort of suspicious material. Keep me posted on your progress.
Rachyl -
Just updates itunes and now it doesn't open at all, not even an error message
I just updated itunes and now it doesn't open, no error message comes up, it's like i never even clicked it, well for a second the 'in progress' circle spins
tried restarting the computer, that wasn't any help
cleaned up registry with ccleaner
even opened up programs and features and right clicked it instead of uninstalling it i clicked repair, no help either
please anyone have a solution?try with this one
uninstall all the apple application S/w from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it -
when i reinstall the older version it works fine,but when i update it to latest version it will stop working nothing happens when i click on it
Still the same,i downloaded from the main sit and installed it after that it will start and check add ons compatibility and then just nothing.
-
I checked the task manager and saw that firefox.exe is there. The Profile manager wont work. I have tried uninstalling and updating.I use bitdefender 2012 internet security.Its not because of the firewall either. Please help.
sorry it did not help........ I couldnt launch the profile manager so its no use.... then the registry cleaner I had actually cleaned it and I had also created a backup before doing so.I restored but didnt help.....Should I try and restart after the registry restore?
-
Windows XP: iTunes will not open - no error message
Hi,
I have a fresh install of Windows XP with no other programs installed but Firefox, a graphics driver, and a wireless adapter driver - all on C:. This computer was built for surfing the net and managing an iPod... that's pretty much it. Anyway, I have reinstalled several times both Windows and iTunes and every single time I can install successfully, the event log confirms that it installed successfully, and then when I go to open iTunes, nothing happens. Not even an error message. The hourglass starts and then it disappears and... nothing. Its as if I never opened it. The event log shows this int he application folder:
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
I'm not sure this has anything to do with it because it doesn't indicate an error, just that an event occurred and it has no description for it.
Please help me... TIA!After trying sto start iTunes, open the Task manger and look on the processes tab, do you see iTunes.exe running?
If so you have a problem that is commonly due to an issue with cryptographic services.
If you have just done a fresh install, was the smart card service installer, iTunes requires it.
Here are my troubleshooting steps for silent launch failure with iTunes.exe running in the task manager:
Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
A couple of simple things to try:
http://support.apple.com/kb/TS1776?viewlocale=en_US
Stop the bonjour service, this FAQ has instructions:
http://support.apple.com/kb/HT2250?viewlocale=en_US
But usually it is due to a problem with cryptographic services.
Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
Start>>Run>>Services.msc
you should find the smart card service in the list. Report back with your findings.
Malware can interfere with cryptographic services and also pervert a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
Then work through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
You should be able to copy and paste the individual lines to save on typing.
Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
If there are no errors try starting iTunes. -
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article. -
MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."
MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."
If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report. -
My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.
Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy -
Accidentally copied microsoft word icon to desk top. Now program will not work. Error message says cannot be opened because of problem. How do I re-install ?
Drag the Word icon back to where it belongs.
Applications > Microsoft Office 2011 > Put Word there.
I'm assuming you have Office 2011. If you have 2008 there should be a similar location to put Word. -
I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3The fact that there is so many discussions with no clear answer is the problem.
I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing. -
Database mail not sending no error messages
SQL server 2008 R2
Database mail was up and running until sometime last week. It seemed to quit in the middle of a long list of emails. We had network issues at this same time that might have contributed to the issue.
Everything checks out ok today but I cannot send a test email. I do not see any error messages or 'db mail starting up' messages in the log.
I do see the Email in the sysmail_unsentitems view.
I do not receive any error messages.
I tried setting up a secondary account and that did not make a differnce.
I tried stopping the mail service with EXEC msdb.dbo.sysmail_start_sp and the query never completes. I canceled after > 5 minutes
I deleted many unsent and one retrying message from the queue. I see those actions in the log.
Is there any thing else I can try?
KDHave you worked through the troubleshooting steps in the following BOL Topic to validate that the external executable is activating, and the queue status is correctly returning RECEIVES_OCCURRING:
http://msdn.microsoft.com/en-us/library/ms187540.aspx
Also have you tried increasing your retry configuration parameters to handle the larger mail queue that you are sending through?
Jonathan Kehayias | Senior Consultant,
SQLSkills.com
SQL Server MVP | Microsoft Certified Master: SQL Server 2008
Feel free to contact me through
My Blog or
Twitter. Become a
SQLskills Insider!
Please click the Mark as Answer button if a post solves your problem! -
Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
YeahOK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
P.S.
This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.
Maybe you are looking for
-
Hot to retrieve an authenticated user for JCA in a repository service?
Hi, I implemented a repository service wich calls an ABAP Functionmodule via JCA and RFC. This connection has to be build up with the current logged in user. But how can I get an authenticated ep6-user in the repository service received-event? Or is
-
Wha wha wha?? Can only access https sites, not http?
This is odd. I don't have a firewall. I can get on https but not http. Software Update also doesn't work, nor does anything iTunes does that needs the internet. Also, I suddenly need to type in an administrator password any time I modify or move anyt
-
Hi Gurus, I want to create some custom buttons on Runtime Prompts (like Add, Remove etc)? How I create Custom button and associate to the Business Rule? Thanks & Regards, Sravan Kumar.
-
SQLLDR Command line arg question.
Is there a way to override , from the command line, the table_name of the ... INTO TABLE table_name ... clause of SQLLDR's LOAD statement? ie. If my control file looked like this ... LOAD DATA INFILE * APPEND INTO TABLE my_table_1 could I have data l
-
Sending multiple photos with iOS4
Am I missing something here or does the latest update NOT let you send multiple photos anymore? Kinda annoying that they took that feature away.