Burning Problems - How many filters am I supposed to have?

I have been working with PAC with trying to solve my issues and he mentioned that I only have one lower filter. I have reinstalled itunes and followed the change reg. instuctions, which deletes the lower filter. Am I supposed to have two lower filters? Should I be adding on to the registry?
My other post with all of this info is PAC can you help me.
Thanks!

I can't believe more people haven't complained about this and that there is no answer or the famous "workaround". I have had to reset all my ring tone assignments at least a dozen times over the past year. This is a replacement phone, and has happened many times on either. Was using Outlook 2003 pop mail until recently and now Outlook 2003 in exchange. In both cases, the special individual ring assignments hang around for a while but eventually, sure as shootin, they all return to the default and each must be reprogrammed.
Well, guess what? I give the f... up. I have finally been beaten. I am NOT going to reprogram all of them again "hoping for the best" from an Apple product only to be played the fool. I'll just pretend it's yet another feature shortcoming. After spending over a year with the phone, I can safely say, nothing on this phone works properly, nothing.
Message was edited by: Richard Caughlan

Similar Messages

Where is the serial number on the lightroom cd or box? how many digits is it supposed to be?

where is the serial number on the lightroom CD or box, how many digits is it supposed to be?

If you got it from B&H photo they will correct the problem. Probably way easier to deal with than Adobe. I have used them for years. There used to be (I think still is) a guy at B&H and took care of problems.
Henry Posner [email protected] so next time you call you may want to ask to contact him.

Is there a limit to how many MS personalized domains you can have under one live account?

Microsoft personalized domain names for anywhere access
I have setup two separate essentials servers “anywhere Access” using my own Live ID account.
Server1.remotewebaccess.com and server2.remotewebaccess.com Both work perfectly.
Is there a limit to how many MS personalized domains you can have under one live account?
Staple Bench Computers

I think it is five
Grey

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes??????

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes?

As jules says, your rate (currently at least) may be slow.
If it used to be good I wonder is your ISP is slowing ('throttling') your speed after you've used so many GB of a quota each day or month - check what they think you should be getting as a download speed.
While Apple's servers do occasionally play up, it's generally the ISP being slow not Apple.
If you're using Google's DNS servers that has caused issues for some.
Recommended speeds for near instant playback:
SD         2.5Mbps
720p      6 Mbps
1080p    8 Mbps
Is your speed test from somewhere like speedtest.net?
It might be helpful to post Mbps to ensure we/you are not confusing speeds by using different units to those measured.
AC

In How Many ways or Techinques used to have relation beween two factables which dont have common dimesions

Hi folks,
In How Many ways or Techinques used to have relation beween two factables which dont have common dimesions
or
how to establish relation beween two factables.
Thanks
Ravindra KAvali

Hi kavali1985,
According to your description, you want to build relationship between two fact tables without common dimension. Right?
In Analysis Services, to build relationship between two fact tables, at least you need to have "common" column in both tables which can link these two tables. If so, we can create a fact dimension based on one fact table, then build the relationship
with the other fact table. Please refer to link below:
Defining a Fact Relationship
Best Regards,
Simon Hou
TechNet Community Support

How many structures can a BEx report have?

Hi All,
How many structures can a BEx report have?
Is there any limit to that.
Thanks

Hi
we can create two structures in the querl level.
we can able to create two structures on rows but on columns it allows only one structure.
key figures can be included in characteristics. characterstics can't be included in the keyfigures.
we can save the structure as global and locally.
from query performance point of view its not recomemnded to create the structure.
it decreasse the query performance.
it may help you.
bye,
kumar.

How many max connections opened do you have?

Hello!
I've read so many answers to these questions that, i don't really know what is the correct one. So, i would like to know what do you have. Here they are:
1- How many max connections per torrent do you have set up?
2- How many max opened connections do you have in mldonkey (or similar)?
Thanks!
Last edited by dienadel (2007-03-08 08:25:36)

AFAIK it's arround (total connections):
- <5 for RTC
- <100 for slow ADSL
- <500 for medium ADSL
- ~1000 for high-speed ADSL (and max on Windows lol) ; went up to over 1500, without positive change.
I use rtorrent & have a limit of <100 connections per torrent (4 leechers max per torrent so they get something)

HT2729 how do i find out how many GB's of music I have in iTunes

How do I find out how many GB's of music I have on iTunes?

View > Show Status Bar, and the number will appear at the bottom.

My FaceTime icon in dock is not showing when and how many calls I have missed (similar to the email system where it shows how many emails (on the stamp icon) have been received

My Face Time icon in dock does not show how many calls I have missed. It should show the number similar to the email system(a red number appears on the stamp icon). How can I rectify this problem?

Hey michelefromuk,
Thanks for using Apple Support Communities.
Mac Basics: Notifications keep you informed
http://support.apple.com/kb/ht5362
Check or uncheck "Badge app icon" option to show badges on the icon of the app in the Dock.
Have a nice day,
Mario

How many radios does the 2600 AP have?

Hi All,
My question relates to how many clients can be connected to a 2600 series AP. The documentation states 200 clients per radio and the AP has three radios. However when my AP gets to 200 it rejects further clients with the following log:
Thu May 9 15:40:22 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients falls below max limit number:200. Failure Cause:Clear Maximum Client Limit Reached in this AP WLAN..
Line 72: 71 Thu May 9 15:40:10 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients exceeds max limit number:1. Failure Cause:Maximum Client Limit Reached in this AP WLAN..
I see this exact message many times and each time the radio mac address is the same and the number of clients connected is 199. The same mac address is used for both 2.4ghz and 5ghz so does this AP have a single logical radio covering both 2.4 and 5ghz frequency ranges and is the limit for all connected clients 200?
When viewing the AP details under the Wireless tab it only lists one mac address for each AP for both 2.4ghz and 5ghz frequencies.
Please only reply if you know the answer
Thanks in advance

Thanks for all your responses.
Scott, you noted a max client limit of 1 which I'm guessing you've got from the log entry
Line 72: 71 Thu May 9 15:40:10 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients exceeds max limit number:1. Failure Cause:Maximum Client Limit Reached in this AP WLAN..
The limit 1 refers to how many clients over the max limit failed. As a log is created for each failure every entry will be 1.
Our problem is we have 200 client devices in a charging rack near a single AP. Whilst they are charging and turned on they consume very little bandwidth. These devices are not PCs or laptops and consume very little bandwidth when they're in use and this is confirmed by the switch interface reporting throughputs of about 5Mbps for all devices on the wifi network which consists of 11 APs and a single WLC.
I will try and limit the number of clients per AP down to 100 for the AP at the charging rack and 60 for all other APs and see how we go.

How many DMA Channels does my device have?

I would like to know how I can find out (progammatically) how many DMA channels my device has. I am using the DAQmx driver. Other than with the traditional DAQ I can't find out anything about my device but the "type" and the "serial number". Where can I get some more details about the device (not in the MAX - I want to know it in my program) with DAQmx?
My intention is to find out how many DMA Channels the device has and depending on how many Channels I need - I am using "interrupts" instead of DMA.
Somewhere in the KB of Ni was written that the NI-DAQ 6.9.... realizes automatically how many DMA Channels are available and how many I would need - and so he takes "interrupts" for the rest.
It seems that they did a "step bac
kwards" because with the NI-DAQ 7.2 it doesn't work automatically if I need DAQmx VI's.
Does somebody know anything that would help me to solve this problem?
Thanks.

Sorry! I posted my first revision of the answer.
Here is what I meant to say:
Hello,
According to this KnowledgeBase, DAQmx and Traditional DAQ behave the same. Are you seeing something different?
As far as a workaround goes, all you have to do is trap the No DMA error. This error should be -200251. So in software, if you receive error -200251, then you need to configure the board to use interrupts, and then start the task again.
How to configure the board for interrupts differs from the four different DAQmx API�s (C, C++, DotNET, and LabVIEW). If you are unclear about how to do this in your environment, please let us know, and we can find
out.
Best regards,
Justin T.
National Instruments

How many view/FML files can I have?

Guys,
We are running Tux 6.5 and in the process of combining multiple applications,
we have in excess of 100 view files lined up in our VIEWFILES32 environment variable.
Is there a limit on how many we can have? How about FMLs?
Thanks,
Ed Blank

I don't believe there is any limit beyond the limit on the size of an environment
variable or the memory of the process. I did see a problem reported on VMS, but if
you are not on VMS, I wouldn't worry.
Compiled Viewfiles can be concatenated if you like.
This is just based on a quick look at the code, so I'm not promising that the
above is correct. Maybe someone wants to try it and let us know.
Eb Blank wrote:
Guys,
We are running Tux 6.5 and in the process of combining multiple applications,
we have in excess of 100 view files lined up in our VIEWFILES32 environment variable.
Is there a limit on how many we can have? How about FMLs?
Thanks,
Ed Blank

How many porgams (or pages) can you have on your ITouch?

Hello,
I have a 32GB Touch with the newest software i think 2.1, and have purchased a lot of programs/games and such. I noticed when i installed over 144 apps on it the new ones i install do not show up. I have 9 pages on it, can you have more then 9 pages or have more the 144 apps installed at one time? When i purchase one on itunes or on th touch it looks like they dont install because i can not turn to the 10th page on the touch but if i delete an app and power it off and power it back on it will appear in the area where i deleted the previous app...So is the a limit on how many programs you can have on the touch? Or is something going on? Ive tried reinstalling everything and starting from scratch but it does the same thing everytime...So any ideas? Thanks in advance

exactly when you say "most" that isn't all, and we should have the ability to install all the apps/games that we want...I don't want to have to decide before I go out or on a trip which games i think i might wanna play...I think apple really needs to change its thinking on this. All other platforms of PDA type devices do not limit you on how many applications you can have installed, its only limited on the amount of storage you have. So if we have 32GB of storage we should be able to use that amount for more apps

How many pages can a PDF form have?

I'm about to reformat a word document into a PDF form. The document is over 50 pages long and may include simple form fields to large areas of text that can be entered and also various check boxes. Is there a limit to how many fields you can have in one document? Also with such a long document, may there be issues with users, editing and saving?
Thanks for any insight before I begin this project.

There's no specific limit. But if you are talking thousands of form fields you could see poor performance.
Be sure you are fully aware of the limitations in Adobe Reader if you intend the form to be used by Adobe Reader. ASSUME NOTHING. For instance, many people have come a cropper by assuming that Reader will be able to just save filled in forms.

How many Bus Catalyst sites can I have with my Creative Cloud subscription?

I have a creative cloud subscription with all products. I also created one bus catalyst server site. How many bus catalyst server sites may I have with my single subscription?
Thanks.
Dawn

It is five, but there is no email offered with these sites. You must upgrade to (paid) basic "+" to have email.

Burning Problems - How many filters am I supposed to have?

Similar Messages

Maybe you are looking for