Burning problems with Toshiba A505-S6972

Lately I've been havint troubles burning Dual Layer discs..
mostly it's around 50%, but sometimes it stops at 5% or 10%.
I know it's not the file, because sometimes it cán burn the same imago to a disc..
I use the newest Imgburn application to burn my ISO-files to Verbatim Dual Layer discs,
which should be the highest quality Dual Layers available, so I have heard.
I'll put the screens I get in the Attachments!
Thanks for any help you can give me!
PS: I also tried finding a firmware update for the drive, but I couldn't find one at all!
Attachments:
Verbatim Fout met branden.jpg ‏198 KB
Verbatim Fout met branden2.jpg ‏188 KB

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Similar Messages

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
I marked the option to verify dvd after burning.
I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
On windows error report i find this error:
and this alert:
+ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
I see this solution by upgrading firmware for different models of cd/dvd-rw units
http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
but not about the model I have.
i have:
TOSHIBA Recovery Media Creator version: 3.1.02.55065006
windows 8.1 x64.
there is a solution?
is a known problem?
thanks
Elena

> I don't have a free usb drive to test the usb mode.
I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
Please check also this different procedure described in this Toshiba HowTO
[How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
Feedback is greatly appreaciated

Boot-up problem with Toshiba L505-S6955

I had downloaded YouSendIt client, internet was a bit slow, thought I'd re-boot the computer.
But when I turned it back on, it hits the Toshiba splash screen, then goes to a blank screen with a large static cursor in the upper left hand corner.
It doesn't go any further than that.
I tried Toshiba boot-up disks, but it still doesn't boot up.
Any suggestions?

Not a solution, and I have no idea why the Racovery CD won't boot, but the blinking cursor in the upper left sounds like a problem with the HD. I have seen that when the boot files are corrupted, and maybe when there was a problem with a cable.
Quick thing to try would be to pop the hard drive out and back in a couple times, sometimes it's just a simple matter of the connection between the HD and the computer. If that doesn't help, then it's likely that the drive has died.

Brightness auto adjusting problem with Toshiba 39l22U.

I own a Toshiba 39 inch LED 60hz 1080p hdtv (Model 39l22u), and I've had nothing but problems for months. I bought it back in January of this year for 400$ at BB and I initially had no problem with it, I thought that once I figured out the best picture I'd be satisfied, so I never bothered to return it. My problem isn't the picture detail, it's actually really nice on Bluray movies. My problem is something else. The brightness sort of adjusts when you move your camera angle around in video games. Unfortunately not many own this tv and the ones that have it and reviewed it said it's fantastic and has no problems, not a single mention of this.
The overall brightness of the TV adjusts to what you're looking at in game. For example, looking down at a road on Grand Theft Auto V the road gets brighter and the sky gets darker, then when I look up the road gets a bit darker while the sky gets brighter. While driving in a car at fast speeds can be an eyesore because the camera is moving and the brightness is adjusting a lot. It's like the TV is auto adjusting the brightness for some reason.
I also had another problem, but I was able to solve it. Dark areas would dim when the camera's in motion then go back to normal when you stop moving the camera angle in games. This was solved by turning the brightness up and it disappeared. So naturally I thought that maybe by turning up or down on things like the backlight, contrast, gamma etc that maybe this would go away, but it's still there.
This TV doesn't have many extra settings when it comes to Picture. Aside from the basics you have Dynamic Contrast and Dynamic Lighting, nether of which cause this problem as it still happens when I turn both of these off. There's no energy saving feature aside from powering down when not in use for a period of time. I'm stumped here, ether my TV is faulty or there's some sort of auto brightness adjust built into the TV that you can't change. I've also tried every different setting in my Xbox 360's display settings, but it's still the same problem.
Unfortunately I can't find out much about this TV, only a few reviews in which people say the TV is great. Which makes me think my TV is faulty.
Is my TV faulty? Or Is there something that could be causing this? Any ideas on what the problem could be?

I'm unfamiliar with that problem. If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Burning problem with gneux.exe

hi, this is the problem with gui can any body suggest me how to download a file with name c:\program Files \sap\frontend\sapgui\gneux.exe its very urgent pls respond immediately

Hi,
Do you have the installation CD with you ?
Regards
Sunil

Problem with toshiba 1405-S151 will not boot up.

Hello everyone!
Just wanted to hey! and introduce my self, I have 2 Toshiba aptops, a 1405-S151, and my newest L355-S7905, but my problem is with S151. Lights come on fans runs,but will not boot up bought a new harddrive old one shut down.
Can some one help?

It sounds like a hardware problem since you are getting no boot, no video and no DVD eject. Make sure that this is a computer problem and not something else. Remove ALL attached devices to the computer, including printers, USB devices, external keyboard and mouse. Remove the main battery. Remove one of the RAM memory modules, so that there is only one RAM memory module in the computer. Try turning on the computer. If there is still no boot and no video, exchange the RAM module and try again. If it still doesn't work, disconnect the power cord, reinstall the main battery and try powering on computer using just battery power. If the computer still doesn't work, you are looking at having the computer fixed at Toshiba-authorized repair center. There is a listing for the repair centers on this website. If there are no repair centers in your area, you can always call the Toshiba Call Center at 800-457-7777 and arrange to have the computer sent to Toshiba's repair depot.

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

DVD Burner problem with P965 Platinum

I have had on going issue with my DVD burner. When i try to play or esp burn a DVD the whole PC slows down and i am unable to open or run any other applications. The Burner is connected via IDE cable and i have tried 2 other DVD Burners with all the same result. When i play a DVD the picture jitters and when i burn a DVD the burn rate is about 10 x slower than my other PC. It comes across as if there is a data transfer problem, not sure though.
Could this be a bios issue or maybe a faulty IDE port on the MOB ???
My system
MSI P965 Platinum
Intel Core 2 Duo E6600
2 x 1GB DDR2 800mhz RAM
Leadtek 8800GTS 640mb G/C
W.D SATA II 320GB HDD
ASUS DRW-1612BL DVD Burner

I would also like to add that, this fix has also fixed my Lan input port. I built this PC about 3 weeks ago and from day one the Lan connection would come up with that "Limited or no connectivity" issue. So I thought it was a faulty Lan port so I went and bought a PCI Lan card to fix that issue.
But as soon as i applied this fix, I noticed the network connection popped up so I tried it out and the damn thing now works.
Extremely Happy
cheers

Still problems with Toshiba Bluetooth Adapter under Windows 7

Hey there, it's me once again.
I refer to my thread "Bluetooth Problem under Windows 7":
I thought after the solution from bluecat my problem was solved. But it's not really.
After installing the Windows Hotfix, it worked just shortly. But now the problem is the same.
When I delete the Toshiba Bluetooth Stack and try to work with the Windows Bluetooth Manager, I see, that the Bluetooth icon is coming an going on the task bar. In device manager I said Windows, that it doesn't shut down the device to save energy. But I think the device is turned on and off and on and off...
I really have absolutely no idea what the problem is, but I am becoming terribly angry.
Details:
Windows 7
Dell Wireless Bluetooth Internal Adapter 350 (but it's made by Toshiba)
Drivers tried out: Vista Profile Pack from Dell Homepage (no stack installed, just driver) / Toshiba Bluetooth Stack (the latest version)
This is the old Thread:
Dear all
Just as I installed Windows 7, my Bluetooth mouse and keyboard don't work fine.
I use the Dell Wireless 350 Bluetooth Internal Adapter, Logitech MX1000 mouse and keyboard and Toshiba Bluetooth Stack 8.00.02.
To connect the devices with my Computer, I firstly must disconnect the Bluetooth adapter by pushing Fn + F2 on my Dell i9400, after re-connecting I can search and connect the devices correctly. They work fine as long as the notebook is running.
After rebooting the notebook, the devices don't work anymore. They are still listed in Bluetooth Stack as known, but not as connected. Therefore I have to disconnect the Bluetooth adapter another time and re-connect it to be able to connect the two devices.
I firstly thought, that it's a Windows problem. I thought that Windows is able to put down the adapter to save some energy. But when I go to the Device Manager, there is no box for this option as known from other devices (f.e. USB-Ports). So this is not the problem. I think the problem is something else, maybe done by the Bluetooth Stack.
Under Windows XP this all worked perfectly. I used the same hardware and also the Bluetooth Stack by Toshiba (downloaded on the Dell Homepage).
Anyone some ideas?
Thanks!
Daevu

Hey there
Yesterday I made Format C: and installed Windows 7 new.
I did not install any bluetooth driver for my Dell Wireless 350 Bluetooth Adapter (made by Toshiba).
And now: The mouse and the keyboard are working. I even do not see them anywhere in my system, but they are working.
There is no bluetooth adapter in my device manager and I had not to connect the mouse and the keyboard with my computer. It's simply working without doing anything.
I don't understand this...
Is this a save connection?
What I've tried already:
-> Installing newest Bluetooth Stack from Toshiba. Problem seen in the message above. I also installed the MS Hotfix. Same problem.
-> Installing "Vista Profile Pack" from Dell Homepage, recommended for my notebook and Windows Vista. There is no stack installed. So I had to connect the mouse and keyboard via Windows Bluetooth Manager. But the adapter was made on and off by windows, the icon in the taskbar came and went and came and went. Connection is 1 minute good, then some seconds away. Not possible to work with the mouse.
And now without installing any driver it's working. Am I stupid?
Daevu

Burn problems with audio encoding

I have a 1hr 40 min movie that I've converted to QT and put into iMovie. I then put in several songs at different places and rendered and burned it. After burning a few more copies, it unexpectedly froze while something about "encoding audio" was in the window. This is curious b/c the rendering process had already taken place.
Went back in, re-loaded all the songs, re-rendered the movie and burned one copy. At the end of this burn, it ejected the disc, then froze with a message like "finishing copying" or something like that, and wouldn't make any more copies.
When I open the iDVD project again, it now will process the menus, but as soon as it gets to processing the movie, it freezes and indicates it's trying to render the audio.
Anybody have any clues? I'm beginning to think it's a hardware issue, maybe my logic board?
Thanks.

The problem is in making multiple copies once all the rendering has been done and it's just in burn mode.
Create a disk image and burn from that.
File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Strange Problem with Toshiba Express Media Player on Satellite M115-S3094

I'm experiencing a strange problem in my Toshiba M115-S3094, which was pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.
I had previously done a clean Vista installation on it, and then I decided to revert back to XP with my recovery DVD. I did the same procedures of first installing Express Media Player from Backup (which I made when i purchased the laptop) and then installing XP from Windows XP recovery DVD from Toshiba.
The steps included:
1- Deleted partitions from Express media player recovery disk
2- Installed express media player
3- Recovered Xp from Recovery DVD, by selecting "Recover without changing Partitions" (there is no expert mode)
Everything went very well (i.e. the installation)......But now after shutting down my laptop as I press the Express Media Center button, the "Express Media Player" logo appears on the screen after loading for 5 seconds laptop shutdowns,
I tried to open it again and again but the logo appears for 5 seconds and then my laptop shutdown....
Laptop works fine when I logon to windows by pressing power button.
Can anyone help on this strange issue..?

Hi Jaba
Thnx for reply.
Now i would answer the questions asked by you and try to clear you confusion,
Yes, Express Media Player was previously installed on my machine, and I have used it, it was perfectly working.
About installation of Media Player, The whole story is that, firstly i wasnt known about how to make a Toshiba express media player recovery cd through windows, so downloaded an ISO of the media player from a forum and install media player by first deleting partitions.
After that I can again installed xp through recovery dvd and choose the option "out of box" state and then selected "install without changing partitions"
After a successfull recovery, I shutdown my pc and pressed the media player button, the media player logo appeared for 5 seconds and then my laptop shutsdown, this is happening all the time when i start my laptop by the Express media player button.
After this I read somewhere how to create a backup recovery cd for Express media player, So i run the recovery disk creater and made a backup of Toshiba Express media player.
After doing the above procedure I again formated my hard drive through recovery dvd and selecting the option "Delete partitions and overwrite sectors". When this was finished, i booted my laptop with the newly made recovery cd for express player, after selecting English as my language, This it what said:
"Installation Error" An error occured due to wrong system ID or unsufficient space on hard drive, press escape to quit.
THE ABOVE IS THE WHOLE PROCESS IN COMPLETE DETAIL.
AND JAMA,
About the link you provided, it says that on the Recovery dvd select the option for "Expert Mode", but in my recovery dvd (for Toshiba M115- S3094) there is no such option as expert mode, there are only two options
1- Restore laptop to "out of box" state
2- Format Hard Drive

A lot of burning problems with ITunes 6.. Where Can I Get ITunes 4 back?

Hello!
Few weeks ago I've installed ITunes 6 on my new pc.
At this point of time I could burn CDs, but the soundcheck didn't work. I've inserted a blanc disc and selected the playlist. But then the Burn- Button didn't get yellow. So I clicked on it and the CD was directly burned without aligning the volumes of the songs..
The second problem occured today. I've reinstalled iTunes 6 and now the message 'disc recorder not found' appears each time, when I wanna burn a disc.
What does It Mean?
Is It possible to switch back to iTunes 4. There I hadn't any problems..
[sorry my english is not soo good]

Kcrusso wrote:
my Macbook Pro will not update to 11.4.
Why not?
Apple menu > Software update.
or here -> https://secure-appldnld.apple.com/iTunes11/031-07683.20140923.rewr3/iTunes11.4.d mg

***PLEASE REPLY***problem with toshiba bulletin board

Hi...
I posted a thread ...and for five days no one reply to me ?
please help me with this:
The icons in toshiba bulletin board program disappear ??
I uninstall it but it's same
you can see it:
http://yfrog.com/4rproblemep
my regards

you actually need to put back the icons dragging them back to the bulletin.
Toshiba Bulletin Board
oOo
*Read EULA before installing any software.
√

Problem with Toshiba A205-S4617

Problem Description
The computer freezes up randomly, not allowing any kind of action, just shutting down with the on/off button.
This happens in safe mode too.
It has the particularity that one can not turn on/shut down/Log off, if the computer is connected to the power source (i.e. to turn on or shut down the computer I must unplug the "charger" or else it will hang up as I explain earlier)
- During Turn on
It goes from the green loading bar in black screen that says Microsoft Corporation to a black screen and stays there, sometimes even gets to the welcome screen where one inserts the password, but that's how far it goes, does notgoes further than that.
- During Shut down
Closes all running programs and icons on desk desappear, closes the windows explorer getting ready to shut down and hangs up right there.
All this problems are present too removing battery and working without it, connected to power source obviously.
Attempted Solutions
- Upgraded from Windows Vista Home Premium (O.S. by defect) to Windows 7 thinking that the problem could be in the O.S. and changing to a new one could solve the problem.
(Problem not solved)
- Downgraded to the Windows Vista Home Premium again with the recovery factory disk, bringing the computer to the original configuration (out of the box state)
(Problem not solved)
- Used several repairing software, registry repair, debug, antispyware, drivers upgrade, defrag, HDD check, etc. such as "Advanced SystemCare Profrom Iobit, "Power Suite" from Uniblue)
(Problem not solved)
- Thinking it could be a communication problem between hardware and that maybe a bios software upgrade could hold the solution, I upgraded it.
(Problem not solved)
At this point I don't know what else to do.
Can someone give me a hand so I can at least know what the problem is?
The computer model is A205-s4617 I have not changed or added anything on hardware

Satellite A205-S4617
The computer freezes up randomly..
..with the recovery factory disk, bringing the computer to the original configuration (out of the box state) (Problem not solved)
If it happens just after restoring the hard disk to its original contents, then it's surely due to a hardware malfunction.
Test the memory.
How do I know if my computer has a memory problem?
-Jerry

Burning problems with Toshiba A505-S6972

Similar Messages

Maybe you are looking for