Burning to a dual layer DVD

Hello,
I've just finished a project that I want to take to a facility to have copies made. I've been told in the past that using a DVD-R can create problems with the copies when used in certain DVD players. I'm running DVD SP2 and I can't seem to get the program to accept anything but a DVD-R. Is this a preferences issue or should I take the actual Video and Audio TS and burn it straight to the dual layer DVD? Would appreciate any help?
John
PowerMac G4 Mac OS X (10.4.6)

It could be a hardware and/or software problem.
As far as Dual-Layer disks go ... I don't think they were around in the DVDSP 2 days... that's too long ago for me to know (without searching, and searching is your friend in this case).
Also your G4 might only have a DVD-R drive and that might be why DVD SP is only accepting DVD-R's. You most likely don't even have a Dual-Layer DVD drive unless you installed one later on in your G4.
How large is the Video_TS folder? You'd only need to burn it to a Dual Layer if it's >4.7gigs and even if it is you need to create a Dual-Layer break point in DVDSP to tell the disk when to switch over to the other layer on the disk. Or if it's just over 4.7 gigs (approx.) you can try and re-compress it and see if you can fit it onto one disk (which may be better for compatability issues, something you seem to be concerned about) - you may end up having more problems w/ Dual-Layers and players compared to DVD-R's and players.
Good Luck

Similar Messages

Unable to Burn Anything to Dual Layer DVD

Greetings,
I have a new Memorex MRX-530LE dual layer burner, and I have verified that I do have the latest firmware from the manufacturer.
I am able to burn dual-layer DVDs with no difficulty using NERO. I am unable to burn a dual-layer DVD backup with iTunes 8. I have verified this with two different brands of DVD+R9 (DL) media, and I have verified that I am easily able to burn backups using single-layer DVD-5 media.
Can anyone verify whether iTunes 8 supports dual-layer at all? I have searched the forum and find nothing more recent than 2006, and am hoping that others have now experienced my situation, since DL media and burners are common today.
Best regards and thanks in advance,
Scott

Hi. I am having the same problem. I have already done one backup and I want to do an incremental backup, but when I insert the DL+ disc it tells me that I will need 14 disc. My itunes is only 6.5 gigs?
I think it's a bug.
dedit

IDVD ejects disc during burning process of Dual Layer DVD

Hi,
I am trying to burn a 3hr iMovie project of a recent holiday trip. Due to its size, it therefore needs to go on a Dual Disc DVD. I intend to burn 8 copies, one for each member of the holiday.
I successfully burned the first disc in iDVD, however since then, the disc prematurely ejects at the "Multiplexing and Burning" stage, (At the 'Writing Lead In' stage within this) ,usually with 31mins remaining
I am burning at 4x , I have 27GB free space and I am using AONE Plus DVDs. I have read many discussions on here about buying Verbatim DVD-R's which i can do, but with the first dvd burning successfully, I would prefer to try other options before I commit to purchase..
Thanks in advance for any help you can give me
Max

Hi again,
I purchased a pack of Verbatim DVD-R DL Discs, tried the iDVD route and it ejected at the burning and multiplexing stage again. Not only this, but after burning and trying that same failed disc again, it actually contains part of the project, so this disc is now unusable.
After this I went the Disc Utility option as you advised and successfully got to the end until the 'closing session' section. Here, it continues to load and says it is 'closing the session' and i can hear my Disc drive spinning away, stopping, then starting to spin again (this continues to happen forever and ever)
Any suggestions at this stage would be great as i'm truly at a lost cause now..
Thanks
Max

Cannot burn photos to dual-layer DVD

I'm trying to use iPhoto's Share->Burn menu, on a recent Mac Pro. It doesn't get far before failing the burn (I don't think it burns any data at all).
The error I get is:
Burn Failed
The burn to the OPTIARC DVD RW AD-7170A drive failed. Double Layer transition point has already been specified; it cannot be changed.
<<
I have rebooted and tried three DVD+R DL discs of two different brands.
No idea what to look at next. Help!

Hi. I am having the same problem. I have already done one backup and I want to do an incremental backup, but when I insert the DL+ disc it tells me that I will need 14 disc. My itunes is only 6.5 gigs?
I think it's a bug.
dedit

Can iTunes 8 burn to a dual layer DVD?

Since I'm having issues with my iPod, Mac internal drive, and Time Machine, I'm wanting to start making backup copies of all my music. Before I make coasters out of my DL DVDs, I'm wanting to know if iTunes can even burn to a DL disk? I would use Toast, but it complains about the music I purchased.
FYI, I could care less if the disk is playable on a regular DVD player. I'm only wanting the storage space in case something happens to the original files.
TIA!

What I just did: I took a 6GB+ playlist and clicked on "Burn Disc". Inserted a DL-DVD, and it gave me a warning about how this was a DVD and probably wouldn't be playable on machines. I said OK. There was never any step where single-layer vs double-layer came up: as someone said above, it just knows. It began burning and warned it would take up to an hour, then about 15 minutes later it was done.
So basically it's just like when you burn a CD, but instead of clicking the CD button, click the bottom one that says "Data CD or DVD" (or something like that). Worked without issues with a DL-DVD, which is nice because I've been unable to use DL-DVDs with some other Mac software, and iTunes has been unable to recognize longer CDs (100 minute ones), on my system at least.
Note: I believe that burnt data discs don't include playlist data, so if you re-import from these backups, things like play counts are lost.

Super Drive / Dual Layer DVD's

Can a Super Drive in a Power Mac G4 Burn the new Dual Layer DVD's ? If not, what do I use to get more capacity than the standard 4.7 gig DVD's.
Thanks
WM-300

Hi-
The info I relayed, was in regard to the DVR- 109, not the DVR-111......poor proof reading on my part. You will notice the link (in my second post), and intended recommendation, was to the DVR-109. This drive needs a flash to reach full potential, made possible by Las Vegas' utility:
http://lasvegas.rpc1.org/
The DVR-111 needs no firmware flashing, except to alter media support, or remove region code restrictions.
Sorry to have caused any confusion ......... at least wm300 figured out what I was getting on about.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 1.62gbRAM, 120gb+160gb HD, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, LaCie 160gb, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

DVD RW DW-U10A won't read burned Dual Layer DVD

My friend created a dual layer dvd for me on his PC. I put it in my G5 and after about 15 seconds of the drive trying to read the dist it just gets spit out. It won't mount or anything.
Why is this happening? I've never had problems reading discs created on a PC. Is my drive incompatible with DVD DL+R media?

Hi,
I've been having a similar issues since not long ago. I think it coincides with Apple,s last security update (although I can't swear the 2 are connected).
I have a dual core 2GHz PowerMac G5 with a Pioneer DVD-R 110D Dual Layer.
I'm burning Dual Layers medias with Toast 7 (DATA, DVD-VIDEOS ETC). They all mount fine after and I can read the files etc. However if I insert the discs a few day slater, about 50% of them won't mount and are rejected without any error message!
Anyone else has this problem?

Sense Error Message when trying to burn Dual-Layer DVDs?

Hey all,
I am trying to burn a dual-layer DVD disc with the internal drive in my MacBook Pro.
I am getting the same error message from Toast each time I try to burn a disc. I get no response from Disk Utility (it just says "waiting for the disc drive") and Finder doesn't recognize the dual-layer disc when I try to burn in Finder.
I've heard that it may be a media issue, so I've tried with every single brand of DVDs that I can get my hands on. So far, I've tried Verbatim, Sony, and Memorex. I can't find any other brands of media, even at Best Buy?
I've heard that it may be a security update that might have caused this issue. System Profiler says that my machine can burn both DVD+R DL and DVD-R DL.
What is going on?!??

Welcome to Apple Support Communities
The two most common suggestions are (a) try other media, which you've done (and Verbatim normally work) and (b) run a DVD Lens Cleaner disc through it to see if some dirt or dust on the lens it causing the problem. If this doesn't fix it then it sounds like a hardware fault and best to let Apple check it out.

IDVD refuses to burn lengthy video even though it's set to dual-layer DVD.

*"Your project exceeds the maximum content duration. To burn this project, remove some content."*
Project:
*- total project duration: 164:10 minutes*
*- total project capacity: 5.208 GB (max. available: 4.172 GB)*
Menus:
*- number of menus in project: 2 menus*
*- total menu duration: 1:10 minutes*
*- total menu capacity: 54.240 MB*
Movies:
*- total movies duration: 163:00 minutes*
*- total movies capacity: 5.155 GB*
This should fit quite snug on a dual-layer DVD, which I've gone to the preferences and changed to do so. It won't even let me make a disc image.

What encoding mode / bit rate is it set at?
I strongly suggest not exceeding 120 mins. (2 hours) max unless you opt to use a 3rd party app like Roxio Toast's Fit to DVD option.

How can I get a dual layer DVD+R to burn properly?

I can not get a dual layer DVD+R to burn properly. The disk pops out before it's finished, usually at the end of the multiplexing stage. iDVD seems to think the disk is still burning for about 20 more minutes although the box says "done". I tried it with an external DVD burner with the same result. I'm running the latest iDVD version available on a MacBook Pro running Lion. Any ideas out there?

Hi
Free space on Start-Up (Mac OS) Hard Disk - How much ?
• for SD-Video and SL-DVD - I never go under 25Gb
• for DL-DVD I would guess that 50Gb free is safe
• if HD-material is used (needs space to be downscaled to SD-Vide0 as this is DVD standard) - 4-5 times more
Yours Bengt W

Media write error for dual layer DVD burn

I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
Does anyone have a suggestion on how I can fix this?
Thanks

I am using Memorex DVD +R DL disks.
Try Verbatim DVD+R DL discs.

Burnning dual layer dvd Encore CS5.5 errors out.

Here is the greatest error I have ever seen.
I got to burn a dual layer dvd transcoded from AVCHD 1080i with fallowing settings.
Edited footage in PPro and send to Encore via Dynamic link, created dvd project using Mpeg2 with 9mbps, Dolby 192 for Audio.
File size to be burned on dvd is 5.67gb, aprox 1 hour 10 min transcoded with 9mbps, 720x40 wide screen, audio is 192kbps Dolby.
There are three menus one is main and tow sceen selection menus, noting fancy everything as default. menus linked as usual nothing fancy and and it is very basic.
All assets, that used for motion menus and main video is transcoded fine, but when it gets to put dvd together I get this error
Encore starts organizing videos for disk and after that it gets to this above and thats it. Press ok Build progress box gives fail message and option to Ok it. After pressing Ok button this box goes away to build panel.
I have tried to change an Automatic layer break to manual still get the same error, I have tried a custom layer break and still get the same error again, I have tried dvd, and an image, and folder for dvd, still the same error there to. I have redone project from scratch and still got the same result.
However previously I have burned many Dual layer dvds using the same method described, and same settings described, and never had this problem.
Nothing on the PS was changed except the updates installed regularly.
Anybody have any Idea what is this all about? Because I just burned 16 Blu Ray discs, and 16 Dual layer discs on one of the project, and next one a day latter this happens.

I'm having the same problem. not once did it, the encore was automatically break in the case of dual layer dvd. now he does not. I mark the box DUAL LAYER 8.54gb, do DVD disc or image or folder, or change the marking of the layer break from automatic tomanual, and it does not. in the end he always gives the message: duallayer requerid.
wanted to know how to do this manually break, because even in the manual or here on the website of adobe, has no suchinformation. does not show clearly how to manually break. please if someone can give a help, thank you.

Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault?

When I spoke to a person about upgrading from Premiere Elements 10 to 12, I specifically asked if the program could burn DUAL LAYER 8.5 dvds and I was told that it could. That is the ONLY reason that I upgraded. Since recording in full HD the files are larger. I video plays for local theaters. I have been trying to burn a disk that is 7.5GB (2 hours 15 minutes). I bought RIDATA -RDL 4x 8.5GB disks. Then had a dual layer burner installed in my computer. Premiere Element dialog "incompatible disk" The RITDATA says the problem is Adobe, the Geek Squad says the problem is Adobe.
SO ANSWER THIS QUESTION: Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault? I am trying to burn 18 copies of this video (no copyright infringements) and don't tell me to to divide it into 3 disks.

drowning
Can Adobe Premiere Elements 12 burn a dual layer dvd disk?
Short answer: Yes.
What are you burning to DVD disc - DVD-VIDEO on DVD disc or AVCHD format on DVD?
Does your DVD CD burner support double layer single sided discs?
Premiere Elements is supposed to (been there and done that....)
1. burn to Folder (8.5) for Publish+Share/Disc/DVD and Publish+Share/Disc/AVCHD
(you take the VIDEO_TS for the former and BDMV Folder in the latter to a program like ImgBurn
for the actual burn to the DVD double layer single sided disc)
2. burn to disc 8.5 GB/240 minutes
Have you gone the burn to folder Folder (8.5 GB) route?
Have you tried another brand of disc in spite of by the disc manufacturer and the Geek Squad are telling you?
A double layer single sided disc is labelled 8.5 GB/240 minutes. In reality, that 8.5 GB is 7.95 GB. Where are you
coming up with 7.5 GB for your disc? Was that due to typing glitch?
Please review and consider. Any questions, please do not hesitate to ask.
ATR
Add On..Have you updated 12 to the 12.1 Update yet? If not, please do so using the opened project's Help Menu/Update.
This is not Adobe. Rather user to user.

Dual layer DVD will not play after iDVD burning

Hi All,
I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
That part I don't understand.
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Help with burning large project on dual layer DVD

Hi need help please.
I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
is this caused by the break in the layer and what can I do to correct it or to get it better.
thanks
Darren

Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

Burning to a dual layer DVD

Similar Messages

Maybe you are looking for