Burning to DVD, now getting error message. What do i do?ng t
I use Verbatim DVDs as I've always done to burn my DVD's. I think a few weeks ago I may have turned off the "verify" discs after burning option thought I can't seem to find how I did it or how to turn it back on.
I'm not sure if my current problem is related to this but I am receiving this error message after burning most DVDs:
"This disc could not be verified and might be unreliable. Try again using a new, blank disc. (error code 0x80020063."
When I go into the DVDs, all of the files are there (typically video clips I am burning) but some of them will not let me fast forward or jump ahead when watching the videos (which I need to do). I must sit and watch the entire video clip. If I try to fast forward or jump forward, the video clock will run but the video stays where it was. It's quite frustrating.
One more thing, I have tried burning at 1x (a slower speed) and no difference.
Is there a setting I need to turn back on to verify these discs? Any other suggestions?
Thanks.
Message was edited by: Clayton Rhoades
I just dropped into the forums to see if other people were getting the DVD burning verification error (Error code 0x80020063). I've been holding off on the Tiger to Leopard upgrade until very recently. All of my must-have apps were anecdotally stable and I was under the impression that 10.5 was too. Apparently reliable DVD burning is Tiger only, at least on my systems.
We've been burning Taiyo Yuden DVD's almost daily with Tiger with incredibly low failure rates. After what seemed to be a smooth upgrade of a Mac Pro tower & 2 MacBook Pro laptops (one is a Core Duo and the other is a Core 2 Duo) I've spent the entire afternoon troubleshooting until I ended up here. Some searching on the board leads me to conclude that this will be a bigger headache than I imagined.
I've done all the obvious stuff (varied the burn speed, moved the files to a different drive, reset PRAM & SMC, used a different account, deleted finder.plist, tried repairing the system with DU on the Leopard install disc and then I tried burning on different computers with different media). What I'm finding is that over 50% of my DVD's are throwing the error code during verification across 3 different models all running Leopard 10.5.2. CD burning seems to work as before (but we don't use this as much so ?). I saw that some people had posted that closing the finder window helped, but that didn't improve my overall failure rate. The DVD's appear (indentical byte size and item numbers) to be burned correctly and usable, but I need to be sure so I can't trust them.
We need reliable DVD burning for our business and this is a real problem. I was going to trudge over to the Apple store, but it doesn't sound like there's a real fix yet.
Similar Messages
-
With PRE 8 when I try toExport & burn a DVD, I get error code 150:30
With PRE 8 when I try to Export & burn a DVD, I get error code 150:30
What is wrong?
Thanks, Tom
My Laptop is
Dell Studio 17 Laptop PCS17HN
Windows 7 Home Premium
Processor Intel® Core™ i7-720QM Quad Core Processor 1.6GHz
6GB, DDR3, 1333MHz, 2 DIMM
(2) 500 GB Dual SATA Hard Drive (7200rpm) - lots space available
1GB ATI Mobility Radeon™ HD 4650v + TV Tuner
17.3” HD+ (900p) Bright LED Display with TrueLife™ and Camera/Facial Recognition SW
Dell Wireless 365 Bluetooth Internal (2.1) [$20.00]
8X DVD+/-RW Dual Layer Drive8X DVD+/-RW Dual Layer Drive
+ Roxio Easy CD & DVD Burning - Enhanced Burn/Authoring
Soundblaster X-Fi Hi Def Audio - Software EnabledPlease work through the troubleshooting steps in the FAQs to the right of this forum.
http://forums.adobe.com/thread/415318?tstart=30
If you'll tell us in as much detail as possible the results of each step, we'll likely be able to diagnose your problem and recommend solutions. -
trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck
The burn failed because of a medium write error. Tried different speeds with no luck
Then try to use a different brand of DVD or at least a different batch of DVD. The disk may be defective. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciatedHi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
CUSTINVOICETRANS.INVOICEDATE
FROM SALESTABLE INNER JOIN
CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2) -
Trying to burn a cd and getting error message 4260 help?
I am trying to burn a cd in ITunes and getting error message 4260 help please
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
I down loaded latest version and get error message when I launch it. Error message is entitled XUL Runner and says - Error: Platform version 1.9.2.12 is not compatible with miniversion >= 1.9.2.10 maxversion <= 1.9.2.19 and it won't launch. I can launch if I use Run Outside of Sandbox option, but I cannot navigate my home page on yahoo. What happened? Please send fix. Thanks, [email protected]
Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Using IMovie, I get error 2135 when trying to burn to a DVD. Actually, it is during the preparation stage. Never got this before Whats the problem? Thanks
Hi
You must tell more
• Error 2125 - I recognize - but -2135 is new to me
The other is in regard to Movie Length in TIME + MENU time - as this is the limiting factor in iDVD (not GBs or other just time)
a. How many movies
b. duration of each movie
c. Menu selected
d. Is MENU still and silent - or animating and with audio (Takes lot's of the movie time)
e. Encoding quality selected in iDVD
f. HOW did You go from iMovie to iDVD
g. What version of iMovie and iDVD are You using
h. FREE Space on Start-Up (Mac OS) Hard Disk - HOW MUCH
As You see there are lot's of info needed to be of any relevant help
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W -
I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
My Compaq presariocq62's fan isn't making a sound at all and i keep getting error message what do i
i have been using my compaq presaro for about 6 months and the fan stopped working all of a sudden every time turn on my computer get an error message and it has the reason as system fan (90D) so dd some looking nto what i could do and i went on Compaq.com and t keeps leading me here so i thought i would try the forums do u guys have any suggestions?
See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417 -
I shut down and did a restart. uninstalled and reinstalled and still get the error message "firefox quit unexpectedly" and there is no response to the reopen button
There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].
-
DVD-Rs no longer load, DVD+Rs get error message
Hi everyone, I'm having some trouble with my Superdrive. Long story short, ever since I tried to use a DVD+R in the drive it's stopped recognizing DVD-Rs (spits them out without even loading them into the finder) and it refuses to burn DVD+Rs (I get an error code, 0x8002006E).
What I've tried up until now: Reparing permissions (several times, both in a normal session and from the Tiger DVD), running TechTool Deluxe (just got it, no idea what it can really do), and giving the computer some time to adjust its attitude.
Is there any way to get at least one of these types of blank media to work in my drive? This is extremely frustrating.
iMac G5 (iSight) Mac OS X (10.4.8)Make sure the DVDs are clean, not scratched and or smudged.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Try another brand.
Since you indicate that you previously had no problems using DVD+Rs maybe your drive needs cleaning. Cleaning kits are available from any store that sells CD/DVDs.
You can also check out your Mac OS Help Menu for DVD troubleshooting tips and/or solutions. Just type dvd in the search field.
If none of the above works hopefully, you are still under warranty and/or have AppleCare.
If not, then the following links may be of some interest. You are not alone.............
SuperDrive Spits dvd's off the desk
CD drive spits out cds
CD falls out -
I am using Win & Home edition / Mozilla Firefox on my HP laptop. On Oct 8 I used Lightroom to export images to Facebook. Now when I try to repeat this, authentication fails as The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (lightroom) isn't associated with any program or is not allowed in this context.
The export process was working, but isn't now. I have ben having problems with Firefox - I wasn't able to retain the settings for opening with my own Homepage (kept going back to Firefox default. So I have done a reset. Seems that this has somehow disrupted the authentication process. Can you help please.I just dropped into the forums to see if other people were getting the DVD burning verification error (Error code 0x80020063). I've been holding off on the Tiger to Leopard upgrade until very recently. All of my must-have apps were anecdotally stable and I was under the impression that 10.5 was too. Apparently reliable DVD burning is Tiger only, at least on my systems.
We've been burning Taiyo Yuden DVD's almost daily with Tiger with incredibly low failure rates. After what seemed to be a smooth upgrade of a Mac Pro tower & 2 MacBook Pro laptops (one is a Core Duo and the other is a Core 2 Duo) I've spent the entire afternoon troubleshooting until I ended up here. Some searching on the board leads me to conclude that this will be a bigger headache than I imagined.
I've done all the obvious stuff (varied the burn speed, moved the files to a different drive, reset PRAM & SMC, used a different account, deleted finder.plist, tried repairing the system with DU on the Leopard install disc and then I tried burning on different computers with different media). What I'm finding is that over 50% of my DVD's are throwing the error code during verification across 3 different models all running Leopard 10.5.2. CD burning seems to work as before (but we don't use this as much so ?). I saw that some people had posted that closing the finder window helped, but that didn't improve my overall failure rate. The DVD's appear (indentical byte size and item numbers) to be burned correctly and usable, but I need to be sure so I can't trust them.
We need reliable DVD burning for our business and this is a real problem. I was going to trudge over to the Apple store, but it doesn't sound like there's a real fix yet. -
Updated iPad to ios5, now getting error message
Just updated iPad to ios5 today. Now when plugging into my wired Apple iPad Keyboard Dock, I get the "accessory not supported for charging" message. Advice please.
First of all: before you upgrade, always make a backup of your device in iTunes!
The following happens when upgrading to iOS 5 (this is different from previous system upgrades!):
The installer creates automatically a restore file
Then a clean system is installed on your device, all your data will be removed. Don't panic, this will be ok later on.
When the os is updated you get a few configuration questions (i.e. language settings).
At one point you're given a choice:
configure device as a new device
restore from iCloud
restore from iTunes
Unless you want to start all over, choose the third option.
All your settings will be restored at first and your device will restart.
Now comes the tricky bit: After restart your device will work fine as if the process is finished. i.e. you can send and recieve mails. At this point you will not see the apps you had installed, also you're photo's and movies will not be on your device. (I was fooled buy this one at first too)
Do not disconnect your device or quit iTunes! In the background iTunes is still restoring the rest of your data. (Switch to iTunes and you'll see the progress.) This can take some time, depending on how much apps you had installed. One by one you'll see apps appearing on your device. You can't use the untill the whole restore is finished.
When all apps are back, your photo's and video's will be restored.
So please be patient. It took me more than an hour to get everything back in place.
The only small annoyance: there are new Apple-apps added to the homescreen. They're 'pushed' to the second screen by your own homescreen apps, leaving your second screen almost empty. Now you only have to rearrange the apps on the second screen.
If all turns out bad, because you unplugged your device too early, go back to your restore file you made yourself before upgrade. (You did do that, didn't you?) and start the process all over. -
Need help to get itunes running on my PC so that I can back up my iphone.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Best printing protocol for hp Laserjet printer?
I have a small office network of 12 computers running 10.4.11 and 10.5.6 and 2 hp Laserjet printers. I have historically used Bonjour to set-up the printers, but have found that periodically the users cannot print because the printer cannot be found.
-
Can no longer connect my MBP to a local file server
I can no longer connect to a particular computer on my local network from my MBP(Mid 2010 running 10.6.6). I am trying to connect to a Mac G4 tower running 10.4.11. This has worked in the past but now does not. An older MBP(Mid 2007 running 10.6.6) h
-
If a refund isn't available, any idea how to complete the download? Thanks
-
Photoshop CS3 editing does not work in LR 2.0
Just upgraded to LR 2.0 and did the data base conversion everything works just fine. Btw, I did keep the LR 1.4 installed because I wanted to make sure I have a fallback in case I have a problem with LR 2.0. I do however have a problem. I cannot edit
-
Replicating Legal Entity, Business Group, Ledger setting in same instance
Hi, I wonder, why iSetup doesnot support to replicate the LE, BG, IO and Ledger settings in the same instance? (i.e. Transform functionality is not available for BG, LE , Ledger and Inventory Org) Still iSetup allows me to replicate Operating Unit al