Burning to DVD with Timecode on screen?

Is there any way of having the timecode shown on screen when exporting a finished project?
Either in a quicktime movie/converstion or in iDVD so when you watch the movie or DVD the timecode is on the screen?

Hi Craig,
Try Piero's excellent FCE Timecode Display filter
He has written a number of very useful filters. Take a look at QuarterPIP too.

Similar Messages

Burning a DVD with m4v music videos purchased from iTunes

Instead of buying Apple TV, I would like to burn a DVD with my collection of music videos purchased on iTunes. Most of them are Protected MPEG-4 video files, having the extension .m4v
My question what I need to do to burn a DVD with these files, without loosing the quality and maintaining the video's aspect ratio? I don't mind to upgrade my iDVD programme to the version of 2008 and QuickTime to the version of Pro, if that will help to resolve my problem. Currently iDVD 6 does not support the protected m4v files, hence I can't burn them into a DVD for watching on TV screen. Your advice is highly appreciated.

This is from the Terms of Service page for iTunes. The bottom line is that you can't burn the videos to DVD.
10. Purchase or Rental of Apple Content
Usage Rules
Your use of the Products is conditioned upon your prior acceptance of the terms of this Agreement.
(I edited out the sections that do not pertain to your question.)
(vi) You shall not be entitled to burn video Products or ring tone Products.
The complete document can be found at http://www.apple.com/legal/itunes/us/service.html. If you live in a country other that the United States, you will have to get the document that applies to you.
Message was edited by: Glo H

Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

Burning a DVD with Final Cut Pro X stops at 95%, why ?

Stops completely? Mine stopped at 95% for quite a few minutes then finished. This is usually the time in the process where the lead out is being burned and it will not show progress for some time. If it is taking more than 10 to 15 minutes from that point you may have another problem.
stephen

HOW to Burning A dvd with 5.1 audio AND WATCH IT AT HOME ?

I have had I nightmare with the compressor application trying to burn 5.1 audio and the film together had no luck . I wonder what does a guy do to listen to 5.1 files in his home cinema set up ? I know that I can bounce the 5.1 audio into the film in logic but can I burn a dvd with the 5.1 audio and film and take it home and listen to what I have done in a non studio environment ?
Would much appreciate some help on this cause frustration is not the word to discribe me going nuts for like 5 hours trying to figure out how that non musical program works .
Thanks for any feedback ...

Ah, got it.
Since you have Compressor I would guess you also have DVD Studio Pro. Anyway a quick movie showing how to do it. Drag the m2v and audio into the asset bin (you will see it in the lower left of the movie) then it goes through the steps. Note the audio and video streams are not the same length, I just threw it together quickly to show you. Of course menus can be fanbcier and all the rest and there may be some gotchas in the details, but it will generally work. Also make sure to set a First Play for the disc. Usually it is good to have a small couple seconds of black frames or warning on a track before jumping off to the next thing, and you can set the Track to be first play in this case if you like. try to use good media (DVD-R/+R) brands like Taiyo Yuden, cheaper media can cause issues.
http://www.dvdstepbystep.com/quick.mov
Well there are alot of things to take into consideration, but that should give you a good jump start

Will iDVD burn a dvd with surround sound?

I have a quicktime movie with surround sound I'd like to burn to a DVD. Will iDVD burn this and keep the surround intact?
If not, will the latest Toast do this?
If not, are there any other OSX apps that will burn a dvd with surround, preferably a cheap one? I know DVDSP will do it, but that's overkill for burning one disc.
Power Mac G5 quad 2.5 and Mini duo 1.66 Mac OS X (10.4.7)

Hey don't get me wrong, dolby digital surround is way
better than ProLogic, but give the dudes credit that
came up with ProLogic in the pre-dolby digital days
some credit, it is "true" surround.
Sure, it is surround, but it's not the same as having four separate channels. There are limitations to what you can encode, and you can end up with unintended issues on both stereo and surround material. It was a cool invention that was a big improvement on stereo, but it just isn't the same as actually having the channels. It just isn't "four true distinct signals" - it simply can't reproduce everything four true distinct signals can.
I should have said I need actual discrete channels.

How can I reclaim memory/storage so I can burn a DVD with iDVD?

How can I reclaim memory/storage so I can burn a DVD with iDVD?

Move your iPhoto Library and/or your iTunes library to and external HD that is formatted OS X Extended (journaled) and run them from there. Be sure to try the libraries on the EHD before you delete them from the boot drive.
This should easily free up the 25 GB minimum needed for iDVD to create and burn video DVD efficiently.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I burn my DVD with Toast 11?

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?

no need for Toast ..
tell iDVD to create a disk-image
transfer dmg to othe Mac
launch the Disk Utility, burn that dmg .......

Error when tryying to burn ny dvd with Encore

I am getting a error when tryying to burn ny dvd with Encore
PCG "baseball_and_more" has an error at 00;00;00.
Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
Anyone know what this is due to?
If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

First, back on the main page http://forums.adobe.com/community/encore enter
pcg
into the SMALL forum search window on the right and read previous discussions
Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

How to burn a DVD with two audio track?

There is a projet with the original video and a second audio track with music. I want to burn a DVD with both audio tracks. When playing the DVD you should be able to select audio track 1 (the original sound) or audio track 2 (the music). With Adobe Encore DVD it was easy to configure the two audio tracks and burn the DVD. It is posible to do the same from Adobe Premier Elements 11?
Thanks,
Jordi

Welcome to the forum.
Unfortunately, PrE does not allow for supplemental Audio Tracks, when authoring.
I use Adobe Encore for this, but it is only available bundled with Premiere Pro. I do not know if some other, third party, full-featured authoring apps., like Sony's DVD Architect can do that, but I would suspect that they can. The specifications for DVD Architect should have that information, and as it's quite common in full-featured authoring apps., I anticipate that it has that capability.
If you do go with that program, our MOD, Steve Grisetti, has written a very good book on DVD Architect, and it's available at Muvipix.com.
Good luck,
Hunt

How to Burning A dvd with 5.1 audio ?

I have had I nightmare with the compressor application trying to burn 5.1 audio and the film together had no luck . I wonder what does a guy do to listen to 5.1 files in his home cinema set up ? I know that I can bounce the 5.1 audio into the film in logic but have can I burn a dvd with the 5.1 audio and film and take it home and listen to what I have done in a none studio environment ?
Would much appreciate some help on this cause frustration is not the word to discribe me going nuts for like 5 hours trying to figure out how that none musical program works .....
Thanks for any feedback ...

You need Final Cut Studio to burn 5.1 on mac. (DVD Studio Pro, to be specific)
Yes, IMO Apple really sells Logic users short on 5.1. Sure you can author, but no delivery platform unless you pony up $$$ for FCS.

I need to burn a DVD with a menu and everything but I don't have iDVD. Help please? I bought my iMac in March 2012.

I need to burn a DVD with a menu and everything, but I don't have iDVD. I bought my iMac from an Apple store in March 2012. Help please?

You may be able to find iDVD as part of the iLife 11 Retail Package. It is no longer sold by Apple, but you may find it on eBay or Amazon.
Other options include Toast from Roxio.
See here for more discussion of the options.
https://discussions.apple.com/docs/DOC-3711

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

Best export options in QuickTime Pro to burn a dvd with?

I'm trying without luck to establish a workflow where i edit original content (combine image and sound, add credits) in QuickTime Pro then i need to burn the resulting movie to a dvd. This seems near to impossible.
I have finally figured out i need third party software to do more converting before it can be burned (i worry that every conversion robs a bit more quality - i had to do conversions initially to get my content from dvd given to me by the videographer or from my VHS-to-DVD converter into QT Pro, what a pain!). So i've got something called DVDFlick to convert into ISO image containing VOB structure, then use ImgBurn to actually burn the ISO image to cd, to get a playable dvd.
What i can't figure out is what is the proper format to export out of QT Pro? I tried DV/DVPRO and AVI both, but those resulted ultimately in audio skips on my commercial dvd players, as well as a movie that won't play the audio in Windows Media Player, but will in other DVD software players.
I was under the impression i needed to export as MPEG-2, but i can't find that anywhere in QT Pro export options. I notice there is an MPEG-2 add-on for Windows from Apple Store, but it only talks about playback from dvd, not going in the opposite direction like i am, where i want to save as MPEG-2 from Quicktime Pro. Please help make sense of all this
-steve

Sorry, but you cannot export from QuickTime as MPEG-2. As you discovered, the MPEG-2 Playback Component is, as the name implies, for playback only. You'll need to work with the developer of your DVD creation software to determine why you're getting audio skips. Normally a DV export works well, but as they say, your mileage may vary. Any export will depend on the quality of the source media. You may need to look into different software for creating and burning your DVDs if DVDFlick continues to give you problems.
Regards.

Burning to DVD with Timecode on screen?

Similar Messages

Maybe you are looking for