Burning to thrid party drive

I can't find option to change DVD drive in iDVD6 preferences.
Someone please tell me how to burn DVD within iDVD6 using thrid party burner. It should be simple . . .
Thanks.

Hold down the Control key when you click the Burn icon.

Similar Messages

What third party drive do I use to connect my umi-7764 to a phytron stepper motor (zss66)

I would like to connect my phytron stepper motor (zss66) to my UMI-7764, do I need a third party drive ?
And if i need one, which one ?
Thank !
Seb (I am french so if you want to aswer french, let's go )

Sebastien,
l'UMI 7764 n'est qu'un bloc de connexion. En aucun cas celui ci ne délivre de puissance. Donc il vous faudra nécessaire un bloc puissance entre l'UMI et votre moteur. L'UMI 7764 ne délivre aucune puissance.
(N'oubbliez pas d'aimenter l'UMI avec une alimentation 5V externe. Ce 5V est à connecter sur le connecteur situé au debut du boitier).
National Instruments fourni des drives (MID 76XX)dont les specs sont limités en courant. (Elles sont affiché dans le lien ci dessous). Dans le cas de l'utilisation d'un drive NI, il n'est plus nécessaire d'utiliser l'UMI 7764.
Le choix de votre drive se fera en fonction du nombre de phase de votre stepper, et de son courant nominal.
Voici un lien sur lequel vous trouverez une liste de drive pour stepper. (Voir
le bas de la page web)
http://www.ni.com/devzone/advisors/motion/driveadvisor.htm
Je ne connais pas les spec de votre stepper, mais si vous désirez l'utiliser avec un UMI 7764, le plus simple serait de contacter la fbricant de ce moteur, et d'obtenir une liste de drive que celui conseille.
Raphael TILLET
Ingénieur Application
NI FRANCE
Cordialement,
Raphael T

FI Changes for HR Payroll Integration with Thrid party Payroll Software

Hi
I am looking for information the SAP FI activities/ Changes to be done for enabling SAP HR Payroll integration with third party payroll softwares. Can you give some issues you might have encounter and any recommended thrid party payroll softwares. Highly appreciate any documentation on the same.
Regards,
Vic

Download all the files into Execel, hope after tht u can change it to CSV.... To download HR MASTER DATA use Ad-Hoc qqry. Else use SE11, SE12 or SE16 to download IT wise. PA starts with PA0000 ets OM starts with HRP1000. Hope through this u can download and send to 3rd party system....
In std we are having an option for 3rd part PY transfer. Check this if help
SPRO>CROSS APPLICATION COMPONENTS>PREDEFINED ALE BUSINESS PROCESS> HUMAN RESOURCES>HR EXTERNAL SYSTEM

Thrid Party DLL File

Hi,
How to use Thrid Party DLL File through Java Access Bridge or Any other way.
Thanks

You should find the information at http://java.sun.com/products/accessbridge/docs/index.html

Intersense Inertiacube, IC3, ITrax2, InterTrax2 -- third party driver for Labview

Hi,
I've been attempting to use the third party driver located at:
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=1540162FC7953043E0440003BA7CCD...
to communicate with an Intersense Inertiacube via Labview 8.2. It does work, but it causes sporadic Labview crashes as well. Typically Labview will crash in one of the following scenarios (in order of frequency):
- upon editing any VI after running and successfully stopping the Intersense communicating VI
- upon stopping the Intersense communicating VI (not the halt button, but a healthy stop)
- upon starting the Intersense communicating VI (very rare, and typically only after several successful starts/stops of the VI)
My hunch is that this is a memory management issue related to the third party DLL wrapper (isense_dll_wrapper.dll). Does anyone have any experience with this? Anyone know the history of who wrote the wrapper? Is the source code available? Is there a way of having the DLL open/run in its own memory space, separate from Labview's memory space?
Is there a way of having the VI run in a separate memory space from the rest of Labview (so at least if it does crash it won't take all of Labview with it)?
Thanks for your time,
~ Jay

If anyone knows how to contact Sacha Emery, ATE Systems Engineer @ NI, he may have more information regarding this. (He may even have the DLL wrapper source code.) His name is in the ITrax2 Readme.txt file as the creator.
~ Jay

Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

Dear community,
This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
Hau Nguyen.

Dear Community,
I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
Hau Nguyen.

Burning to external CD drives - is it possible?

Hi there
Does iTunes support burning to external CD drives?
I could be wrong but I think read somewhere that this is not possible. I hope you can correct me as I'm looking for a faster burner with LightScribe feature.
Many thanks

Yes some do, at least modern versions (really old ones wouldn't and you had to use a utility called patchburn). See bullet #3 on this page...
http://docs.info.apple.com/article.html?path=iTunesMac/7.3/en/576x.html
Patrick

Is it possible to burn music to thumb drive?

Is it possible to burn music to thumb drive?

Jaywalt,
Adding files to a thumb drive does not require burning, only copying.
The easiest way is to insert the drive into a USB port, highlight the tracks you want in iTunes, and then drag them to the thumb drive.
If you normally run iTunes in full screen mode, make it smaller so that you can do the drag.

My Mac OSX is coming up with error message when i try to write a disc "The disc can't be burned because the disc drive is not accessible (error code 0x80020020)." Same also when I tried my external disc writer-any clues?

My Mac OSX (version 10.7.5) is coming up with error message when I try to write a disc "The disc can’t be burned because the disc drive is not accessible (error code 0x80020020)." I have tried several discs with the same message - Same also when I tried my external disc writer. Both disc drives will read my discs that have music or photos on it, it just won't write any new discs - any clues?

Hi Klaus1
So, I tried all the suggestions and followed the links - all to no avail.
as you can see, (screenshot below) my iMac is a 21.5 inch late 2009 model which isn't showing in the updates listed above
My system report shows that my Mac has the following:
I reset the PRAM and the SMC - still have the same error message when I try to burn discs. I've used both CD's and DVD's and tried with my external Discwriter too.
Any further suggestions??

The burn to the superdrive drive failed. the burn failed because of a medium write error.

Hello, I have an IMAC (OS X version 10.8.3)
And when I put a blank disc (dvd+R 8.5gb DL), it's not even shown in Finder!
So, well, when I try to burn any files on it, it says:
"the burn to the SuperDrive drive failed. the burn failed because of a medium write error."
Please, help to solve my problem. I'm Russian & and it's really hard to find any help on Russian apple forums.
(Hardware of the disc burning):
HL-DT-ST DVDRW GA11N:
Firmware Revision:          JA18
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          x2.4, x4, x8

Or take your Mac to a Apple store and have the built in drive replaced.
Having Apple replace the built in drive is around $120.
Buying a aftermarket external DVD drive is around $30.
You make the choice.
ipopon wrote:
I think i'll try a Verbatim DVD soon...
and if it doesn't work, the only way is to buy an external drive...

Thrid party application wont delete in trash- comes back

i have downloaded a thrid party applciation named 4easy dvd ripper; the free version . I tried to get rid of it by droping in into the trash but not all files deleted.. I had to search for every single file that went with it ... The problem is that the actul application that opens up the download box wont erase from my mac. It comes back evry time i place it in the trash.. the trash will take the .dmg application but once i try to delete form the trash it pop back to Doenloads. How can i get rid of thing .. please help

I think i found a solution ... I had to use the secure empty trash option under finder to completely erase it off otherwise if you try to empty the trash using the regular "empty trash" option the item would disappear from trash and would come back to the mac download folder agian ! ... Thanks for the advice though.

Disabling a Third Party Drive/Motor thru a Relay

I can’t seem to get my INHOUT signal to disable my drive/motor. I have the PCI-7342 Stepper/Servo Motion Controller with the UMI-7764 connected to a third party drive and servo motor. My third party drive requires a constant 24 volt signal to enable my drive/motor. I have the INHOUT connected to a relay in order to control this 24 volt signal. When there is 5 volts at my relay this will enable my drive, when the 5 volts goes low then my drive will be disabled. I have the drive wired up per the attached schematic. Any suggestions would be appreciated.
Thanks,
Nick Argyros
[email protected]
Nick Argyros
Interconnect Devices Inc.
Electrical Test Engeiner
[email protected]
Attachments:
Motor Wiring Diagram.pdf ‏131 KB

If you use the source current of the INH output it probably will not be able to drive a 5V relay. Jochen's calculations are valid for the limiting current, i.e. the current where the output voltage will be zero. With a resistive output the output voltage will depend on the current needed by the relay coil and will never reach 5V.
It is better practice to use the 64mA sink capability of the INH output. But of course in this case the relay will be activated when the output is low. In your case you may wire the relay between +5V (do NOT use the +5V pin of the 734x connector!!! - you may use a +5V terminal of the UMI box provided your UMI power supply can supply the UMI box plus the relay current) and INH, and use the N.O. contact of the relay.
If this is not desired I would suggest to add an extra output transistor (any small signal transistor can sink 100mA or more) connected as an inverter or a driver IC such as an ULN2803. A single transistor has a saturation voltage of less than 0.5V, and most, if not all, relays rated at 5VDC will switch reliably at 4.5V. Check the relay specs for the 'must on' voltage.
Never, I said NEVER, connect a relay to a semiconductor device without a snubber diode. The diode should be connected across the coil terminals (and close to them), with the cathode to the (+) terminal. It will short the inducted high voltage when the relay is de-energized. Some relays have integrated snubber diodes.
Also, I see from your diagram that the emergency switch can be operated at a certain relay position only. At least in Germany this would be illegal since the emergency switch has to be independent from any other control circuitry.

I updated iPhoto and now can not burn a cd on iPhoto. I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc. I am recieving the follwing message:
The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
I have tried to do a SMC Reset and PRAM reset and it still will not work. Before the update I was burning pics onto the same dics with no problem.
Any suggestions on what to do?
Thanks!

Hey MGRUBE,
Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
Disc Burning Quick Assist
http://support.apple.com/kb/ht1152
Thanks,
Matt M.

LENOVO IBM Thinkpad Multi-burner Plus Ultrabay slim Drive P/N: 73P3342

Can you tell me if the multi-burner plus Ultrabay slim drive P/N 73P3342 is compatible with a ThinkPad 600X (Type 2645-4eu)?

Welcome to the forum.
Unfortunately, the answer to your question is : No, it's not compatible.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

ADF BC Business components and Thrid party JDBC Driver

Hello all
I am using JT400.jar file to connect to AS/400 data base in my JSF/ADF Application.
We are using shared library for all non oracle jar files . and my application fails with error message
## Detail 0 ##
java.sql.SQLException: No suitable driver
During runtime. even though i am importing the required jar files from shared library settings in server.xml / application.xml
When i don't have the entry in shared library for this jar file it will fail during deployment time it self, but with shared library link it works during deployment but fails during runtime
it will work during runtime if i add my jar file to BC4J/lib folder. but team responsible for mintaining application server don't accept adding non oracle jar files to oracle installation folders
Any Advise
Thanks

The ADF BC runtime library JAR files are in the BC4J/lib directory.
The ADF/BC4J runtime JAR files may also be included in the ADF/BC application by copying the files to the WEB-INF/lib directory of the ADF BC application.

Burning to thrid party drive

Similar Messages

Maybe you are looking for