Burning video DVD's from any program doesn't work anymore... help!

Here's the situation:
I have tried to burn a DVD in idvd and Popcorn, both failed.
Error message in IDVD was:
idvd: errors were found during the burning process
then... there was a problem during multiplexing/burning
Popcorn reported:
Drive error:
The drive reported an error
Sense Key = Medium Error
Sense Code = 0x73, 0x03
I also tried using popcorn to burn from a disk image. I can create a disk image in idvd, but burning from a disk image failed.
I tried a different video, just in case my files were corrupted. No go.
I tried a different user. No go.
I used disk utility, emptied caches and still nothing.
Then I tried using the finder to burn just data onto the DVD. That worked.
The media is Maxell DVD-R 16X.
Please Help!!!!! I am out of warrantee and am not sure what to do here.

Ditto to the above (slower media may help). Maxell is great media but i'd also try Verbatim DVD-R Minus media....just to see if it works any better.

Similar Messages

Setting proxy from installation program doesn't work

I think I found a bug in installation program.
When I go to setup network in installation program, choose not to use dhcp and then setup the proxy configuration there it doesn't work.
I know it's not a network problem or anything because I managed to install fine after going to another VC and using export http_proxy="myproxyip:port" and export ftp_proxy="myproxyip:port" and then returned to installation program on VC1.

The best thing to do when you think you found a bug is to post in the bug tracker. Things have a tendency to get lost in the forums very quickly, as well a number of Arch developers don't come into the forums at all.

Whatsapp notifications doesn't work anymore, help please

Hello everyone,
I have a problem with my Whatsapp application on my Iphone 4. Since 1 week now I do not receive any push notification for new messages and I have to open the app to receive them. Moreover, all my notifications settings are "on" to accept Whatsapp notifications (on whatsapp and on the phone settings).
I tried to reinstalled Whatsapp, delete everything from my iPhone and then restore my data with the backup on my computer but it did not change anything, I still can't receive any notification, unless I open the application. However, I noticed that I can receive notifications when I've just closed the app (within 2-3 minutes) but after that, nothing anymore... Very strange.
Does anyone have an idea why? And any suggestions to try fix this problem?
For info, I'm using an Iphone 4, iOS 7.1.2, Whatsapp 2.11.8
Thanks everyone,
Charlotte

HI,
FINALLY FOUND THE SOLUTION :
SAVE ALL YOUR PHOTOS ON YOUR PC WITH CAMERA SCANNER, SAVE ALL YOUR CONTACTS / NOTES / REMINDERS TO ICLOUD.
THEN DO "ERASE CONTENT FROM IPHONE" IN THE RESET OPTION.
WHEN THE IPHONE RESTARTS, SELECT "CONFIGURE AS NEW IPHONE", AND GO THROUGH THE PROCESS OF STARTING UP.
ONCE ON HOME SCREEN, INSTALL WHATSAPP AGAIN FROM APP STORE AND VOILA, IT WORKS FINE. NOTIFICATIONS AND ALL.
GET YOUR CONTACTS BACK FROM ICLOUD, GET YOUR MUSIC BACK FROM ITUNES.
INSTALL ALL YOUR APPS AGAIN FROM SCRATCH. ;(
THATS THE ONLY SOLUTION TILL NOW.
REGARDS,
DANI.

My Ipod touch 2nd gen. was working fine but when I tried to charge from my PC the Ipod start getting too hot and the screen turn black and doesn't work anymore.Maybe is burn?

My Ipod touch 2nd generation was working fine until I tried to charge again from my PC,when I connected the Ipod was getting too hot and smelling like burn cable,the screen turn black and doesn't work anymore. any ideas about what happen?

You can try here:
iPod touch: Hardware troubleshooting
However, from your discription, I suspect that something is broken. Maybe a dead battery. In that case. I would make an appointment at the Genius Bar of an Apple store and see what they say.

How to burn a DVD-R from a .img w/ DVD@ccess?

My authored DVD has a pdf document that launches from a menu. The pdf sits alongside the VIDEO TS folder on the DVD. After formatting an image file w/ DVDSP 3, and opening the image, I'd like to burn a DVD-R from these files. I checked Toast, but it will only burn the VIDEO TS folder. Is there a way to burn a DVD-R using all the files that the .img opens?
Thanx in avance!

Toast is more than capable of burning the entire lot - I use it regularly to do so... give it the disc image and it should create the DVD for you.
If necessary, make sure that it is set to create a UDF disc and drop the V_TS, A_TS and .pdf file into the Toast window manually... then burn that.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

I have a MacBook Pro...I am having issues with being able to highlight any text from any program...it works intermittently...and then not at all...any suggestions?

I have a MacBook Pro...I am having issues with being able to highlight text from different programs. It works intermittenantly and then sometimes not at all. Went to where bought it today and tested one of their MacBook Pro's and it was working fine. Any suggestions?

I have a MacBook Pro...I am having issues with being able to highlight text from different programs. It works intermittenantly and then sometimes not at all. Went to where bought it today and tested one of their MacBook Pro's and it was working fine. Any suggestions?

Printing directly to adobe from any program

i have seen where you can print to adobe directly from any program. it does not show up as a printer in "printers and faxes" but does show up in your print options in the program you want to print from. can anyone help me to set this up? i am using windows xp home on an acer 3502lci laptop.

This is the free Reader forum.
You may want to go to the appropriate Acrobat forum for your OS (assuming you have Acrobat).

DVD error after burning Video DVDs

Hello anyone,
I am using my T500 with WinXP SP2 as an mobile editing system. Unfortunately I experienced some problems burning Video DVDs on the installed HL-DT-ST DVDRAM GSA-U20N drive. Eventhough the final DVDs work sofar on all PCs and Apple systems that I have tested but they don't work on some standalone DVD Players. The same disc image, burned on a different PC produces correct DVDs though. I update the drive's firmware but no difference, lowered the speed again no difference. Used NERO 6 and cloneDVD same poor result.
Would appreciate help
thanks in advance

when you say different PC, did you burn it in a PC dvd burner or a laptop dvd burner??? Have you tried to change the brand of the dvd burnable to see whether it might solve the problem??
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

Possibly. See this Web page.
By the way, you seem to have been misled by the poor field labeling of this forum software into trying to type your entire post into the "subject" field. Next time you might want to type just a short summary of your post into that field.

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

Hello,
I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
The
access to the SD-Card on the MCB2400 works in other cases finde, if I
try to read from a text-file it works without any problems.
Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
I have noticed that there is also a problem
with the reading of textfiles. If the sice of the file is about 100Byte
it doesn´t work anymore, too. I can´t understand it, because I read
always just one Byte. And even if the implementation in Labview is so
bad that it allways reads the total file in the ram it sould work. The
MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
work.
But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
bye & thanks
amin
Solved!
Go to Solution.
Attachments:
SD_Card_Read-test.vi ‏12 KB

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

In my dock there was this weird program called "tutorial". While throwing away this program I had to fill in my password. Afterwards I tried to change my password, but my old password doesn't work anymore. Who can help?

In my dock there was this weird program called "tutorial". While throwing away this program I had to fill in my password. Afterwards I tried to change my password, but my old password doesn't work anymore. Who can help?

What was this program for, or did you just assume it's something you shouldn't have and therefore arbitrarily decide to "throw it away"? Exactly how did you supposedly throw it away?
If you didn't change your administrator password, there's no reason it shouldn't work now, so that suggests you did something else, or changed it and then forgot what it was.
You can't recover that password; you can only change it. To do that, you would need to boot from your Snow Leopard DVD, choose your language, then choose Reset Password from the Utilities menu in the top menu bar.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Burning video DVD's from any program doesn't work anymore... help!

Similar Messages

Maybe you are looking for