Burning video onto DVD

how do you burn video onto DVD? pretty simple question... hopefully!
thanks

Hi I read your instructions but I am not too bright with computers i inserted my dvd but where are the files and how do I get them and drag them to what icon?? Sorry like I said not to computer litterate

Similar Messages

How do I burn video onto disc so it can play on t.v.

how do I burn video onto disc so it can be viewed on T.V.

That is what iDVD is for.
If you have it:
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf
Previewing before burning:
http://support.apple.com/kb/PH5447
If you don't:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673

I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share. Thanks for any help.

I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share. Thanks for any help.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

How do I burn my videos onto dvd

I tried burning a video playlist onto DVD afterwards I tried playing it but the files could not be read. Please Help!

Movies and TV Shows purchased from iTunes Store cannot be burned to DVD in a format readable by traditional DVD Players. you are only able to burn them as data, readable by other iTunes capable computers.
EE

Burning videos onto a DVD

I bought the first season of the TV show LOST assuming I could burn it onto a DVD. I have a DVD burner and blank DVD's but I can't figure out how to burn the shows. Does itunes allow that?

Gentlemen, Welcome to the Apple Discussions!
From the Apple Knowledge Base:
Videos purchased from the iTunes Music Store have FairPlay digital rights management embedded in the files and are in a format that can be readily synced to a Fifth Generation iPod. Just like with music you purchase from the iTunes Music Store, you own the videos you purchase. You can authorize up to five computers to play purchased videos, and you can sync the video to as many iPods as you like. iPod can contain purchased content from up to five accounts; iTunes will not allow you to add data from a sixth account to iPod.
http://docs.info.apple.com/article.html?artnum=301461
What this means in relation to your questions is that you can
b and should
back up the videos you've purchased from iTMS.
One method of doing so is to burn the files to a DVD as a Data disc. But you will only be able to view them on an iPod or an authorized computer.
You cannot burn them to a DVD for playing on your home entertainment set-up, though ... unless that set-up includes an authorized computer. You would not probably want to do so anyways since the videos have a resolution of only 320 x 240 pixels and watching them on a full size screen (or medium size screen for that matter) would not be the optimum viewing experience.

Burning uploaded video onto DVD

Sorry to be a dolt... Using a fancy cable from my Sony Handycam, I have uploaded a few hours of home video onto my MacBook Pro and have been looking through it in iMovie. But I can't seem to locate the function that stitches together various pieces and then burns them onto a recordable DVD. Just not finding this in the iMovie menu options properly. What I need is probably a basic iMovie functionality tutorial, but maybe a quick answer will point the way.
I also paid for Apple's Final Cut Express app when I bought the MacBook in 2008, thinking I would eventually do some more advanced video editing, and it's on the machine but I haven't even looked at it yet. Final Cut is more than I need at this stage and if I can't even manage the most basic aspects of iMovie, well..
thanks, Will

Hi Will
In iMovie, you essentially need to start a new project, and then drag your event clips into it. There are some pretty good tutorials on the iLife site - for iMovie...
http://www.apple.com/ilife/tutorials/#imovie
(The first tutorial shows you how to add events to a project.)
...and iDVD, which you would use to create a DVD.
http://www.apple.com/ilife/tutorials/#idvd
Post back if you have more specific problems!
Matt

Burning video to dvd

Once you have recorded HD video with the ipod 4g, is there a way to burn it to dvd? And can the ipod 4g be connected to a big screen tv? I have an ipod dock with the audio/video cables going into my tv, does the ipod 4g work with it?

If you have a dvd recorder you can hook the computer up to the dvd player play the video on the computer and record using the dvd recorder.
To put it in IDVD use handbrake to rip the dvd you just recorded into mp4, convert it to quicktime (using imovie), and then drag the finished Imovie onto the menu in IDVD.

Burn files onto DVD

Can someone explain how to burn files onto a blank DVD, please? I have iMac with Lion and DVD-RW. When I insert the DVD, no icon appears on my desktop. If I go into the disk utility, the disk shows up there. Then I click BURN, and a window opens up for me to select files. But all the files are grayed out and non-functional. What am I doing wrong?

Please read:
http://docs.info.apple.com/article.html?path=mac/10.4/en/mh854.html
and here is a good video tutorial:
http://www.videojug.com/film/how-to-burn-a-dvd-on-a-mac

Transferring VHS Video onto DVD via Macbook

Hi
I've been given a large project and need some (simple) help.
Its to transfer about 40 VHS tapes onto CD,s.
Help please as How/what do I need/ is there any step by step instructions?
Thanks

Hi Nigel
First, please be clear about exactly what you need to do. You need to transfer video from VHS, but if you need to burn video to a playable disk, you need to create DVDs, not CDs (which are for audio or data only). If you're unsure about this, check with the person who gave you the project.
Next, you need a VHS video player with video outputs. It's most likely that you'll have RCA-style "composite" video, which is a yellow connector, along with red and white connectors for the audio. You may also have an S-video connector, which is a round multi-pin socket. If it's a newer VCR, you might even have component video, which is a series of three red, blue and green sockets.
The third part of the equation is getting that video into your computer. With a MacBook, you don't have any kind of video-in socket, and even if you had a Mac Pro desktop, you would still need to purchase a video capture card to get the video in.
However, Macs (except for the very newest MacBooks) all have Firewire ports, which is an industry-accepted way to import video. If you have a video generating device plugged into your Firewire port, you will be able very easily to pull it into iMovie, or Final Cut (Express or Studio). So if you can borrow/rent a device to convert the video to a Firewire signal, that's the best solution. You can use a digital camcorder that has composite video in and Firewire out (usually the most readily available solution), and any professional "video deck" will also do this for you. There are conversion boxes available, but they are quite an investment if you have to buy them.
Matt
Message was edited by: Matt Clifton

Burning movies onto DVD

I have some movies on my MBP and want to write them onto DVD so I can play them on my DVD player. They are played through quicktime on my MBP, if I burn them to DVD will they just automatically play through my DVD player or do I have to do something else?
Also, what kind of DVD format do I need?

RW discs is an option but not all DVD players can read them, usuallt the cheap ones (cheaper the better) can read them but the expensive ones can't.
You will have to try it and find out if your DVD player can read/play them without skipping parts or messing up the sound.
Toast will encode the avi or any other file to DVD format and uses the entire DVD space. Toast compresses the movie using all the space it has to keep the best quality, putting more than 1 movie on a single disc is possible if you drag multiple files into Toast's Video section and it will give you the option to make a DVD menu and everything but the quality will get poor.
Best is: 1 disc for 1 movie
Don't be sorry for asking questions that's what the forums are for !
We all had to learn one way or another, why not on a forum

Burning slideshow onto dvd

I'm trying to burn a iphoto slideshow onto a maxel dvd-r (4.7 GB 16x). The disk is ejecting after the "multiplexing and burning" is done. I tried to save the disk as a disk image and burn from my desktop but the it doesn't let me select the disk image (icon is "grayed"). I'm sure I'm doing something wrong... (I'm working from a MacBook Pro, 10.7.3, software... seems to be up-to-date)
help?

Hi
So - Save as a DiskImage - result's in an icon on DeskTop ?
If You double click on it - Nothing happens ? or does a new icon of a hard disk pop-up ?
If it does - then open/start DVD-tool and play it - Does this work or not ?
I use
• Verbatim DVDs (only)
• DVD-R (only)
• set down burn speed to x2 or x4 - as x16 results in to many Burn Errors for my liking
Multiplex Error
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How to burn movie onto DVD???

I have made a movie that is about 5 minutes long. All I want to do is burn it onto a DVD so that it plays like a typical DVD movie. In other words, when I insert the DVD into a computer or DVD player, it just plays.
I tried making a Quicktime movie out of it at full quality but when I burned it onto a DVD, all of the text in the titles came out badly jagged. I tried sharing it with iDVD but it wanted me to create themes and other stuff that was way more complex than I wanted.
How do I burn my movie onto a DVD so that it just starts playing on a DVD player or on a computer?
Thank you!

It sounds like you have a burning application besides iDVD. You can skip the Export step by using the existing Quicktime version of your movie to see if that helps your titles (right click your iMovie and Show Package Contents; look in the Shared/iDVD folder and drag that Quicktime movie to the menu area of Roxio Toast or whatever you're using). Small fonts with curly elements don't work well; try a san serif font like Arial or Helvetica and make it large.
Converting video into a format for set-top players is fairly complex work for the computer and some of that requires user decision-making. One idea is to get one of the "Missing Manual" series by David Pogue. You'll get lots of ideas and his explanations are decent. A number of people post here wanting an autoplay DVD -- iDVD can do that, but menus can add another level of enjoyment to your project.
John

What is the easiest way to burn imovies onto DVD's. I want to burn more than one movie onto DVD as I create. Can I continue to burn onto the same DVD as the movies are created?

What is the easiest way to burn my imovies onto DVD's? I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full! Is this possible?

You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

Burning Video to DVD or VCD

Is it possible to export/burn downloaded videos to DVD for viewing on a standard DVD player. I would like to watch TV episodes on my TV without having to connect it to the iMac (if that would even work.)

Unfortunately not. The DRM on the videos you buy from the iTunes Store does not allow this. You may burn the videos to Data disc.

Burning photos onto dvd, loses the original date and time of photo

I'm trying to burn some photos onto dvd, but it marks all the files 'created date' and 'modified date' as today, rather than keeping the original date and time that the picture was taken. Is there a way around this?

Looks like that error is associated with bad or incompatible media. See this thread:
http://discussions.apple.com/thread.jspa?messageID=1738737
Regards,
Captfred

Burning video onto DVD

Similar Messages

Maybe you are looking for