Burning with Itunes error - Error 2380

Well to start I am only having problems burning with itunes, Nero7, windows media player, everything but itunes burns cds like a champ... Infact I have am finishing my 160th burned CD as I write this have yet to get a single coaster. I am running my dvd/cd burner off one of my sata ports while I have 2 dvd drives off my IDE port.
Any help, comments and suggestions is appreciated.
I have tried the following:
1. uninstall and reinstall itunes (that was a huge mess but still no go)
2. Blank disk in and try the CD/DVD Diagnostics (see below please)
3. Completely remove and reinstall all 3 optical drives including the drivers.
**Diagnostics**
Microsoft Windows XP Professional x64 Edition Service Pack 1 (Build 3790)
System manufacturer System Product Name
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce 6600\GeForce 6600
IDE\DiskWDCWD2500KS-00MJB0____________________02.01C03, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SH-16A7S__________________WS04___, Bus Type ATA, Bus Address [1,0]
SCSI\CdRomSONY___DVD-ROM_DDU1615GYS1, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomTSSTcorpCDW/DVD_SH-M522CTS07, Bus Type SCSI, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
*Additional Computer specs* (doubt you need this but here you go)
Asus PB5 deluxe w/ wifi motherboard (Bios is current)
Intel E6600 Core 2 Duo (overclocked 4.125)
G-skill memory 3gb (PC-800)
Western Digital HDs (2.2 terabytes)
Multi OS running *Linux, Win xp x64, Vista Rc1(about to wipe awaiting upgrade launch)
Custom build   Other OS   Windows Xp x64 Pro - Overclock custom build

Just to point out the TssT is a samsung cd burner and the Lite-on is a cd/dvd burner and neither will work with itunes but i can burn on both but my preference is the lite-on burner due to its lower error rate and it has lightscribe also.

Similar Messages

  • HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

    I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

    I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

  • TS3694 I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • My ipad will no longer sync with itunes error -54

    my ipad fails when attempting to sync.  starts then comes back and says unknown error -54

    Hi Siboard100,
    Welcome to the Support Communities!
    Here are a few more troubleshooting steps that you can try:
    Sign out of your iTunes Store account:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    Restart and/or reset your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Try syncing again with iTunes - here are the links for Mac and PC:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Cheers,
    Judy

  • Ipod Touch won't sync with Itunes (error 45054)

    Trying to sync an used Ipod Touch -- All data /settings have been erased. Computer recognizes but unable to sync with ITunes -- notes error 45054.

    I Appreciate your responding to my inquiry but as all those answers were for Mac, I was discouraged.
    I'm on the cutting edge of stupid trying to translate the same problem to Windows from Instructions for a Mac use.

  • My ipod will not sync with itunes error 50

    I recently have been unable to successfully sync my ipod touch with any of the new music that I purchased.  I have been getting an error -50 and have not been able to resolve.  I restored without success in fact most of my music did not sync

    Have you done the troubleshooting in this Apple support document for starters? If not, it would be a good place to start.
    iTunes: Error 13019 during sync
    B-rock

  • When trying to sync with itunes error message reads Apple mobile device not started.  I pod turns on but does not connect to itunes

    When I try to sync my ipod with itunes I get an error message which tells me Apple mobile device is not started.

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

  • Iphone problem with itunes error 1603 on restore

    I allowed my iphone battery to fully discharge and upon recharging got the error message with a large exclamation mark “please connect to itunes”. When I connected to itunes I was told that the phone was in recovery mode and needed to be reloaded. Itunes went out and downloaded the new firmware and began the install process after I approved the input screen that said it would wipe out all my data. 1/3 of the way through the process I received a message box that told me the process had failed to restore the iphone for an unknown error (number 1603).
    After looking online and calling ATT as well as Apple the best solution I received was to send the iphone in for replacement (i am 5 hours from an apple store). After fiddling around I have managed to solve the problem on my own.
    After trying everything else with no results, I pulled the SIM card out of the iphone and plugged the iphone into my computer. Itunes then reloaded the software and firmware successfully. I then put the SIM card back in and synced it up with itunes and it asked me to confirm the resync. Afterwards it just worked fine.
    My iphone works again!

    "1- suddenly my iPhone 5 lost mobile company signal and word searching appears instead but no signal for the hole day so I changed the sim with other provider and since it gave me the same result I searched the web and the seems no solution other than restore.
    I did restore and update to iOS 7.0.4 but at the restore takes at the last 1% in the last moment of restore it will take loooong time then gave me error 3. And now for more than a month the iPhone stuck with recovery logo. Almost I tried every trick in the book . Change USB cable, port, PC. PC with other OS . Even freezing the iPhone as I read here noooooo result the same happened again and again."
    I have exactly the same problem with my iPhone 5s!

  • Restore with iTunes error

    ATV displayed on TV the connect to iTunes with usb icon along with rapidly flashing led, during software update. Connected ATV to pc with micro usb. iTunes does recognize ATV and will allow download to begin. Download timer will indicate anywhere between 15 and 120 hours to complete. Always ends with unknown error message. Tried multiple times. Note: led flashes rapidly whenever power is applied.

    That can usually mean there is an issue with security software  installed on your system
    http://support.apple.com/kb/TS3125

  • IPad mini will not sync with iTunes , error-54. Help me

    Help me, Ipad will not sync with itunes .  Keeps saying error iTunes cannot sync ipad Error (-54)

    Hi SBonner,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Judy

  • Can't play CD's I burned with iTunes

    Hi guys wonder if anyone can help me - I burned a couple of CD's with iTunes to play in my car, one of them won't work at all - it just comes up error. The other one works every now and then.
    I don't think it's the changer system as I can usually play CD-R's and I don't think it's the disc slot as if I swap them round they still won't play.
    Is it a mistake I have made in burning them?
    Any help welcome - thanks in advance xx

    Could be a settings issue. Some cars do not recognize mp3 CDs, you may have made a disc full og mp3 files. Might have put AAC files onto disc, this also might not work in car.

  • Why doesn't CD burned with iTunes open with track data in iTunes on another computer?

    I brought an album of 11 original songs in cda format into iTunes - I then addeded all the data to each song - artist composer genre etc.  and burned an audio CD from the playlist.  When I play it in the car CD player it displays the song names.  When I load it back into iTunes on my computer all the data shows.  When I load it into another computer with iTunes - all it shows is the original file names ie Track01 Track02 etc.  How come?

    Thing that baffles me is that the CD opensin itunes in the computer that created it displaying the full data - but shows track numbers only on another computer - when opened in itunes. 
    On the computer that created it, the info is stored in a file, not on the CD itself.
    Here is more info:
    How iTunes remembers audio CDs

  • Missing ID3 Tags on MP3 CD burned with iTunes

    I have a Sony CD Player in my car. This Player supports mp3 CD's. To Burn such CD's with iTunes is not the Problem.
    iTunes seems not to set the ID3-Tag in it's Libary. Is it possible to set the iTunes-Libary-Informations (as they are displayed on my Screen) as ID3 Tags to the Files ? Are there Risks within ?

    Ooops. You just created a lot of work by erasing the tag info.
    I think there are some scripts out there that can fill in ID3 tags based on file names.
    This page is from an apple discussions regular poster:
    http://samsoft.org.uk/iTunes/scripts.asp
    You could try the "TagFromFilename" script.
    For future, itunes does not have the ability to update tag info like Windows Media Player does. I suppose you could see what WMP will do, before trying that script.
    Since I haven't used either one to do this, I can't say how well either works.

  • Can't burn with iTunes 8.2 or 9.0-- songs sound fuzzy

    Recently, when i bought my iPod Touch, I was instructed to update to iTunes 8.2; upon doing so, I found I could no longer burn CDs; the songs all sounded fuzzy. Today, I updated to iTunes 9.0, and the same thing happened: the songs all sounded fuzzy on the burned CD.
    Other things you should know:
    (1) I tried to burn a CD using Windows Media Player; those songs sound fine. Thus, I have reasonable assurance the problem is with iTunes.
    (2) For some reason, I have no problem burning CDs with my laptop (which I also updated to iTunes 8.2).
    Can someone help me out with this? (And please don't say to download it again. I downloaded 8.2 twice and now 9.0 once, and nothing has improved.)
    Thank you for your anticipated assistance.
    MRD

    Fuzz or static on iTunes-burned audio CDs can often be corrected by burning at a lower speed, such as 2x.

  • Trouble burning with itunes

    when I try and burn a disk itunes says no recording
    software found. Everytime I start up itunes it says thr drivers associated with burning are missing. It ask me to
    reinstall the software which I do and I have the same
    problem. I have other burning software but cant burn any
    itunes Ive purchased do to the formatt. Any help would be greatly appreciated.
    hp   Windows XP  

    You'll probably have better luck over in the importing & burning forums - this it the area for music store questions.
    Importing & Burning in iTunes for Windows
    http://discussions.apple.com/forum.jspa?forumID=791&start=0

Maybe you are looking for