Burnt CD volume on playback not consistent

Can anybody help me with a setting that might be wrong... when I play back my burnt CD's, the colume of songs is not the same. I have my "sound enhancer" turned on but it doesn't seem to do anything... any suggetions?

It'll play fine for a few seconds depeding on the song and then the volume starts lowering then back to normal, and repeats throughout every song.

Similar Messages

Playback not consistent on different computers

I have used Captivate 4 to create a flash presentation. I created the presentation by importing a PowerPoint file with animations as well as imported audio files. I then synchronized the audio with the animation.
The presentation plays perfectly on my computer, but every other computer in my company plays the presentation out of sync. Has anyone else experienced this problem?
Any help would be greatly appreciated.
Thank you,
Jay

Sorry, only certain preferences are synced between computers. This does not yet include toolbar customizations. We're planning to add the ability to sync add-ons and more preferences in future versions of Firefox.

Sound levels not consistent

On my iphone 4S (and on my older 3Gs), i've noticed that sound effect levels (email alerts, SMS alerts, screen locking) are not consistent. Sometimes they are louder than other times, and sometimes they're not happening at all. I've got the volume up all the way too.
anyone else?

Turn on Sound Check.
Run iVolume.
That's all there is to it.
*Can anyone tell me if I can run iVolume even though iTunes does not seem to adjust the volume using sound check.*
iVolume is an application itself. It integrates with iTunes a bit it does not alter iTunes at all. It simply analyzes the sound file and stores the info in the sound file.
Run iVolume on some songs, then turn Sound Check On and Off.
If they sound different, it works.
Not all songs will change a lot.

Data Package is not consistent error

Hi All,
We have a Bex issue the screenshot of which is given in the link below. We have an info cube which has huge data volume. We load it very frequently (every hour from 2 sources). This info cube has been loading from say last 5 years. We stopped compressing the data about an year ago for some reason. We are thinking of compressing the data sometime soon. All of a sudden, users are getting the error shown in the link below more frequently. No much information is available at Service Market place about this issue. Can somebody please throw some light on this?
[Error Screenshot|https://photos-1.dropbox.com/i/l/orsd6TKDlIBVoH4JO79GWQAPNFPlTa88QJ0zkV7Lcc0/53945346/1324418400/3799537/Bex%20Error.JPG#1]
Thanks and Regards
Subray Hegde

Hi Deepak,
I am not able to attach a screenshot. Somebody directed me to servimg.com but, I do not know how to create an account in this site. The error reads like this:
"Error Aggregates of <Infocube> were compressed. Data package is not consistent. Error. Error while reading data; navigation possible.".
Thanks and Regards
Subray Hegde

My Ipod nano automatically reduces the volume and does not hold my attempts to increase the volume. Help!

My Ipod nana automatically reduces the volume and does not hold my attempts to increase the sound. Help.

There is a Volume Limit setting on the iPod. From the main screen
Settings -> Playback -> Volume Limit
You can check that setting to see if it set too low.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

Airport Extreme Not Consistently Assigning DHCP

I am using a relatively new (within the last year) Airport Extreme as the primary router on my home network. Connected directly to the router is a GigE switch, an AT&T Microcell, and another router - an Aruba RAP which creates a secure VPN for my home/remote office network. The connection to my Apple desktop is made through the GigE switch, as are three additional wired connections to other devices in my home, including two Apple TV's and (hopefully) two Airport Expresses.
I recently discovered when trying to configure a new Airport Express to extend my wireless network over ethernet (roaiming network) that my Airport extreme is not consistently assigning the IP addresses within it's defined DHCP range (10.0.1.0 - 10.0.1.200). About half of the time devices on the network are getting a default 169.254.x.x IP address, which (in the case of my desktop) results in an 'self assigned IP' error within the network settings. I can reboot my apple desktop and the next time it gets a correct 10.0.1.1 address. Reboot again, it defaults back to a 169 address - and so on. It doesnt seem to make any difference if I connect my desktop directly to the Extreme, or, if I connect it through the GigE switch. And, every time I get a 'self assigned IP' I have no connectivity beyond the Extreme (no internet), and I'm forced to use my wireless/Airport connection.
Another problem here is that the Expresses both expect to receive 10.x IP addresses and when they don't get one, they basically become pretty $100 paperweights when connected over ethernet. Also, if you try to configure a new Express without the 10.x address it expects to be assigned (and defaults to a 169.x), the Airport Utility will no longer 'find' the Express once the Express auto-restarts and the update will fail. I learned this after spending two hours on the phone with Apple support yesterday - during which they were able to get my first generation Express configured, but, not my 24-hour old second Generation Express, which continues to act only as a paperweight. Oddly enough, everything works perfectly well if I use only wireless connections to the Extreme - there are no IP problems and everything works correctly. Unfortunately, I want to use wired connections for all my devices (expresses, Apple TV's) because we stream alot of audio and video.
Is my Extreme not working correctly? Does anyone think it's problematic to have a second router (the Aruba) connected behind the Extreme? I suppose I could force some components to use only specific IP's, but, that sounds like a pain. If the Aruba is problematic, I would also consider a second internet connection, or, finding some way to split home IP traffic vs work IP traffic.
Thoughts?

I've been doing some research and it appears the 'self assigned IP' address is a common problem in the Apple support community. And, for what it's worth, it appears an inability to isolate or accurately troubleshoot the problem - by users or Apple tech support - is a recurring theme. I totally understand that no two home networks are exactly alike (different ISPs, switches, configurations, etc.), but, after being a die-hard PC user for my entire life I can honestly say I never encountered anything like this while using my PC. I'm not about to trash my Mac, but, the Apple 'ease of use' selling point is quickly losing it's lustre.
I got into this mess because I added a GigE switch to my network. Rather than buy a different switch (a tactic which assumes my problems are being caused by the switch) I'm inclined to buy another Airport Extreme and try daisy-chaining them together to overcome the reason I bought the GigE switch in the first place, which is not enough ethernet ports on the Extreme. That, or I'll spend a weekend in my attic re-wiring my home network to daisy-chain my two Express devices together instead of requiring individual connections to my router. My experience with Apple hardware thus far is that it prefers to 'play nice' with other Apple hardware over non-Apple hardware. It could be $100 error on my end (or, a weekend of not doing yardwork), but, I think it's the best shot. Other possible fixes, including manually assigned IP-addresses, put too much emphasis on software and network configuration - which (by my non-scentific analysis), are two areas even harder to troubleshoot.
I'll let you know how it goes.
Mh
Post Script - Dear Apple: please find a way to significantly increase the number of ethernet ports on your Airport Extreme Router. Thank you.

GR/IR Clearing Account 2..... Not Consistent

SAP Experts,
I blocked GR/IR clearing account temporarely while I updated the open line item field. It turns out that after I finish running the program and unblocked the account. Receiving ca no longer receeive into teh account it says "G/L Accuont 2...... Not Consistent"
Does anyone knows what could possibly be?

I was able to go into IMG bring the field " Only Balances in Local Currency" then went into account brought it to a "ZERO Balance" with TCODE FB50. Went into FS00 and updated field. Then reversed entry, and it works fine.

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Head phone volume controls are not working after updating to ios 6.1 y?

head phone volume controls are not working after updating to ios 6.1 y?

I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

Business partner of organizational unit is not consistent

Hi,
Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
Business Partner of organizational unit XXXXXXX is not consistent
User cannot be repaired becasue the organizational unit contains errors
When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
Similarly, the the organizational unit check is also showing as green.
System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
Any help is highly appreciated.
Thanks & Regards,
Aswini

Hi Aswini,
There are some possibilities to raise these kind of errors messages:
1) User with inconsistent data.
Please, check the instructions described in the following notes:
597475 - Repair users with inconsistent address data
-> use the report B_REPAIR_EBP_USER_2 to make the user consistent.
419423 - Repairing incorrect EBP users
350129 - Creating business partner for organizational unit
When you create the Org Units have you fully completed the address
data, e.g post coe, telephone/fax number etc..
If not, please enter a full address, save the data and see if this
generates the Business Partner.
Remember, that you can delete this user and create a new user.
2) Error in the positions after HR replication
Please, implement the following notes and retest the scenario:
1056873 - Incorrect SRM users after HR distribution
1016450 - Replication of persons deletes positions in SRM
After implementing these notes you should send the employee
corresponsing to the user in error with his position (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods.
3) the user was deleted and a new was created and during these two
actions the user opened documents. So, in this case, the new user
becomes inconsistent
If the user is deleted from SU01 still the BP and S which is related to
that user will be retained (we can see this in PPOMA_BBP) transaction.
In this case we can create the user again using SU01 and can be attached
with the old 'S' and 'BP'.
2. If the user is completed deleted ie., all relations BP and S.
The new user has created.
In this case if the new user is corrupted we can delete this
user (since the new user doesn't create any documents so far). But the
old documents should refer to the new BP related to the new user.
========================
Also, another option would be to follow the below instructions
After applying the notes 1056873 & 1016450, send the employees
corresponding to the users in errors with their positions (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods,
using evaluation path A008) ? If not, please do this and it must repair
the SRM users. Please test and give me the feedback.
Hope this helps,
Kind Regards,
Matthew

GL Account not consistent

Hi
When we are processing MIGO for a PO we are getting error message GL ac so and so in not consistent and if I double click on that message below detial message is getting displayed:
This line item carries the "W" posting line identification. The master record for GL Account 2150000 in company code 1000 must have the "balance only in local currency " indicator if the W identifier is set.
What is "W" posting line identification. Please let me know the solution for this issue
Regards
Padma.

Hi,
As this error is pertaining to GL master check this account under FS00 and tick "only balance in local currency" as it is your GR/IR clearing account which should be managed as open item basis.
Moreover, also make sure field status to this GL (for line item) and of account group (obd4) are in sync.
In OBYC, you have assigned this account under your wrx i.e. GR/IR clearing.
Hope above will help you.
Regards,
Valay Pandya

Metadata of Controller EMPTYVIEW Is Not Consistent.

Hi,
After upgrading NW04s from SP07 to SP11, one of my web dynpro for ABAP application gives the following error on execution.
I am also getting a system dump. I have checked all the necessary services in SICF & most of the required services are active. Does any one have some idea of how I can resolve this error.
Error when processing your request
What has happened?
The URL http://ustca644.kcc.com:8086/sap/bc/webdynpro/sap/zvmkc_tsvm_main/ was not called due to an error.
Note
The following error text was processed in the system PGW : Metadata of Controller >EMPTYVIEW< Is Not
Consistent. "View Controller" Does Not Contain a "View"
The error occurred on the application server ustca644_PGW_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONTROLLER_KIND_TO_TEXT of program CL_WDY_RG_META_SERVICE========CP
Method: CONSTRUCTOR of program CL_WDY_RG_CONTROLLER==========CP
Method: GET_CONTROLLER_PARTS of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE_COMPONENT of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program SAPLWDR_RUNTIME_REPOSITORY
Function: WDR_SAVE_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program CL_WDR_RR_DB==================CP
Function: WDY_WB_GENERATE_INTERNAL of program SAPLWDY_WB_ACTIVATION_SERVICES
Function: WDY_WB_GENERATE of program SAPLWDY_WB_ACTIVATION_SERVICES
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system
PGW in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on
the application server ustca644_PGW_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work
process 0 in transaction ST11 on the application server ustca644_PGW_20 . In some situations, you may also need to analyze
the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: C14216 -l: E -s: PGW -i: ustca644_PGW_20 -w: 0 -d: 20070222 -t: 222514 -v: RABAX_STATE -e:
UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
System Dump
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDY_RG_MD
Date and Time          02/22/2007 22:25:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WDY_RG_MD' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDY_RG_META_SERVICE========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDY_RG_MD', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Metadata of Controller >EMPTYVIEW< Is Not Consistent. "View Controller" Does
Not Contain a "View"
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WDY_RG_MD"
"CL_WDY_RG_META_SERVICE========CP" or "CL_WDY_RG_META_SERVICE========CM001"
"CONTROLLER_KIND_TO_TEXT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ustca644"
Network address...... "165.28.85.39"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PGWA"
Database type..... "DB2"
Database name..... "PGW"
Database user ID.. "SAPR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 30 2006 00:08:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "DB2CLI.DLL 08.02.0003 "
Patch level. 83
Patch text.. " "
Database............. "DB2 for OS/390 7.1, DB2 for OS/390 8.1, DB2 for OS/390
9.1"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 0
MM Used. 12837904
MM Free. 3918160
User and Transaction
Client.............. 400
User................ "C14216"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDY_RG_META_SERVICE========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "165.28.239.30"
Caller Port........... 8086
Universal Resource Id. "/sap/bc/webdynpro/sap/zvmkc_tsvm_main/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDY_RG_META_SERVICE========CP" -
in "CONTROLLER_KIND_TO_TEXT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 20
of the (Include) program "CL_WDY_RG_META_SERVICE========CM001".
Source Code Extract
Line
SourceCde
1
method CONTROLLER_KIND_TO_TEXT .
2
3
data:
4
cref_View type ref to cl_wdy_md_view,
5
ctlr_Type type Wdy_Md_Controller_Type.
6
7
ctlr_Type = controller->get_type( ).
8
9
case ctlr_Type.
10
11
when wdyn_ctlr_type_custom.
12
controller_type_as_text = 'CUSTOM'.
13
14
when wdyn_ctlr_type_view.
15
controller_type_as_text = 'VIEW'.
16
if ( ABAP_FALSE eq Controller->Has_View( ) ).
17
" view controller must have a view
18
gi_Cx_Text = Controller->Get_Name( ).
19
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
>>>>>
raise exception type Cx_Wdy_Rg_Md
21
exporting
22
TextId =     Cx_Wdy_Rg_Md=>Controller_Data
23
Controller = gi_Cx_Text
24
Reason =     gi_Cx_Hint.
25
26
else.
27
gi_Cx_Text = Controller->Get_Name( ).
28
if ( gi_Cx_Text eq 'EMPTYVIEW' ).
29
return.
30
endif.
31
32
" sanity check against illegal CL_WDY_MD_EMPTY_VIEW
33
try.
34
cref_View ?= Controller->Get_View( ).
35
if ( cref_View is initial ).
36
gi_Cx_Text = Controller->Get_Name( ).
37
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
38
raise exception type CX_Wdy_Rg_Md
39
exporting
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
2
SY-DBCNT
0
SY-FDPOS
7
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070222
SY-UZEIT
222514
SY-XPROG
SY-XFORM
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
22 METHOD       CL_WDY_RG_META_SERVICE========CP    CL_WDY_RG_META_SERVICE========CM001    20
CL_WDY_RG_META_SERVICE=>CONTROLLER_KIND_TO_TEXT
21 METHOD       CL_WDY_RG_CONTROLLER==========CP    CL_WDY_RG_CONTROLLER==========CM001    25
CL_WDY_RG_CONTROLLER=>CONSTRUCTOR
20 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11            684
LCL_SAVE_REPOSITORY=>GET_CONTROLLER_PARTS
19 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             91
LCL_SAVE_REPOSITORY=>SAVE_COMPONENT
18 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             29
LCL_SAVE_REPOSITORY=>SAVE
17 FUNCTION     SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYU02             27
WDR_SAVE_REPOSITORY
16 METHOD       CL_WDR_RR_DB==================CP    CL_WDR_RR_DB==================CM002     3
CL_WDR_RR_DB=>SAVE
15 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU04        279
WDY_WB_GENERATE_INTERNAL
14 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU01         84
WDY_WB_GENERATE
13 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF12             77
LCL_REPOSITORY=>CONSTRUCTOR
12 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01             17
LCL_COMPONENT=>CONSTRUCTOR
11 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            669
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~GET_USED_COMPONENT
10 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            245
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~CREATE_COMPONENT_USAGE
9 METHOD       CL_WDR_MESSAGE_WINDOW=========CP    CL_WDR_MESSAGE_WINDOW=========CM001    30
CL_WDR_MESSAGE_WINDOW=>CONSTRUCTOR
8 METHOD       CL_WDR_APPLICATION_WINDOW=====CP    CL_WDR_APPLICATION_WINDOW=====CM00K     6
CL_WDR_APPLICATION_WINDOW=>INITIALIZE
7 METHOD       CL_WDR_CLIENT_COMPONENT=======CP    CL_WDR_CLIENT_COMPONENT=======CM004    59
CL_WDR_CLIENT_COMPONENT=>DISPLAY_TOPLEVEL_COMPONENT
6 METHOD       CL_WDR_CLIENT_APPLICATION=====CP    CL_WDR_CLIENT_APPLICATION=====CM00L    30
CL_WDR_CLIENT_APPLICATION=>INIT
5 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    40
CL_WDR_MAIN_TASK=>EXECUTE
4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    69
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM00I   524
CL_HTTP_SERVER=>EXECUTE_REQUEST
2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                      929
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
%_HTTP_START

Hi Kim,
Please try the following:
Try to reactivate the component
If this does not help, please create an OSS ticket and the SAP colleagues will help you to fix the problem. Please add exact information about the component and open a connection to your system.
Ciao, Regina

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

Burnt CD volume on playback not consistent

Similar Messages

Maybe you are looking for