Burnt image problem on 23" Display solved?????

We had this problem on a new 23" Apple Cinema Display. We tried it on several machines and various resets etc but no difference.
We put it in the car and took it to demonstrate the fault. When we arrived the fault had was not there and has yet to reappear. It seems that driving the monitor in its box for 60 miles on the hottest day of the year so far (in the UK) has solved the problem for the time being.
Go figure.
Jonathan

Well if it was hot and you took it outside, maybe you just gave it a chance to clear that notorious fog out of it's head:)
PS Youdo understand how Murphy's law works right?

Similar Messages

  • Problem with daemons start display [SOLVED]

    Hello,
    I have a problem with the display of daemons startup, i'm not sure what could be wrong, here's a screenshot taken y fbgrab
    rc.conf -> http://arch.pastebin.com/618485

    _Gandalf_ wrote:Just edited mkinitramfs.conf and added my resolution and of course regenerated the archck image, this worked...
    When adding the resolution and theme to mkinitramfs.conf, does it need to be presented in quotes (as shown below) or without quotes?:
    Or does it make a difference??
    # Add a theme to enable fbsplash, Try 'darch', it's included in the gensplashutils.
    FBSPLASH_THEME="darch"
    # Resolution to use, 1024x768 will be used if left blank. Format is '1024x768'
    FBSPLASH_RES="1024x768"

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • Problem in Retrieve Image from DB and display in the JSP page

    Hi All,
    I did one JSP Program for retriveing image from DB and display in the JSP Page. But when i run this i m getting "String Value" output. Here i have given my Program and the output. Please any one help to this issue.
    Database Used : MS Access
    DSN Name : image
    Table Name: image
    Image Format: bmp
    Output : 1973956
    Sample Program:_
    <%@ page contentType="text/html;charset=windows-1252"%>
    <%@ page import="java.io.*" %>
    <%
         try{
              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
              Connection conn = DriverManager.getConnection("jdbc:odbc:image");
              Statement st = conn.createStatement();
              ResultSet rs = st.executeQuery("SELECT images FROM image");
              String imgLen="";
              if(rs.next()){
                   imgLen = rs.getString(1);
                   out.println(imgLen.length());
              if(rs.next()){
                   int len = imgLen.length();
                   byte [] rb = new byte[len];
                   InputStream readImg = rs.getBinaryStream(1);
                   int index=readImg.read(rb, 0, len);
                   System.out.println("index"+index);
                   st.close();
                   response.reset();
                   response.setContentType("image/jpg");
                   response.getOutputStream().write(rb,0,len);
                   response.getOutputStream().flush();
         }catch(Exception ee){
              out.println(ee);
    %>
    Thanks,
    Senthilkumar S

    vishruta wrote:
    <%
    %>Using scriptlets is asking for trouble. Java code belongs in Java classes. Use a Servlet.
                   out.println(imgLen.length());Your JSP was supposed to write an image to the output and you wrote some irrelevant strings to the output before? This will corrupt the image. It's like opening the image in a text editor and adding some characters before to it.
                   byte [] rb = new byte[len];Memory hogging. Don't do that.
              out.println(ee);You should be throwing exceptions and at least printing its trace, not sending its toString() to the output.
    You may find this article useful to get an idea how this kind of stuff ought to work: [http://balusc.blogspot.com/2007/04/imageservlet.html].

  • Image/content cannot be display in email after ISO 7

    Image/content cannot be displayed in email for iPhone 4 after update ISO 7

    Gary,
    Thanks so much for your help!
    The facebook link is now working for the client...unfortunately the Paypal link does not.
    After testing it on other Windows machines with no problems, I am starting to speculate that it is something unique to her setup. I'll have to keep testing I guess and see if any other errors come up.
    Thanks again Gary for the very helpful suggestion that solved at least one of my problems!

  • Photoshop has encountered a problem with the display driver

    I rummaged around in here looking at opengl topics and others associated with the above error, but I'm not seeing what I'm encountering (or I am and I don't recognize it!).....
    I bought CS4 a week or so ago, and installed it on a system running XP32 with service pack 3, 4GB of ram withe the /3GB switch set, nVidia 8600 GT card (which according to the list is supported), and multiple spindles for images, scratch, applications, and so on. I found other topics earlier so I downloaded the most recent drivers for my video card.
    I'm not crashing and burning, but I'm getting some messages...
    I opened an image, and while working on it I wanted to do a transform/warp. I got the message that Photoshop couldn't perform the operation because there wasn't enough memory. It didn't crash but I had to shut down CS4 and restart it to do the warp.
    Most recently I opened a couple images for a panorama, and while doing the merge I got the message that "Photoshop has encountered a problem with the display driver and has temporarily disabled gpu enhancements." It tells me to check for the latest drivers - I've ALREADY got the lastest drivers. Again, no crash, just the warning. It completed the panorama.
    There have been a couple other occurrences of messages of this type, so I'm curious if there's some set of preferences or system settting I need to adjust to optimize things? I've alrady adjusted the nVidia settings because I also run Lightroom and they're having problems too.
    I've read the tech notes for the video and such and didn't find any set of optimizations there so is there a set of adjustments beyond the preferences that needs to be adjusted to improve memory and video performance? And if so, can someone point me to them.

    As I understand it (suspect at best) XP32 can address 4 gig of memory. the /3gb switch lets the applications get at 3 gig of that. If my video card takes the first 256MB, and XP is guaranteed the other 750 of the 1st gig, and in the CS4 performance preferences I should be giving it from 1462 - 1895 MB (I've given it around 1890), that leaves me with another gig or so... Is that limited to applications or can XP use it? In any case, I'm not crashing, I just get the message every so often about being out of memory. I don't recall ever seeing this with CS3, but new version, new oddities...

  • Photoshop CS5.1 Crashes Upon Opening: "Photoshop has encountered a problem with the display driver-"

    Every time I try to open photoshop I get a window that pops up and says:
    "Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements.  Check the video card manufacturer's website for the latest software.
    GPU enhancements can be enable in the Performance panel of Preferences."
    Then windows shuts the program down.  The details of the problem are:
    "Files that help describe the problem:
      C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
      C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
      C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
    I'm on a custom Asus
    I'm using Win7 Home Premium 64-bit
    16GB RAM
    Nvidia Geforce GTX 560 2GB video card
    Intel i7 core 2.2 GHz
    12 GB of memory
    The error happens so quickly that I don't have time to do anything.  Please help.  >.<  I've been on hold for *checks phone* 2 hours exactly.  Wow.  It is a legit copy and was working last month with no trouble.  I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
    Thanks in advance!

    It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open.  Not sure how it did that but I am grateful.  I still get the error when I open Photoshop up but at least it hasn't crashed yet.  At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program.  In case you still need it:
    Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 2394 MHz
    Built-in memory: 16361 MB
    Free memory: 13322 MB
    Memory available to Photoshop: 14694 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Disabled.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Crash File: Detected.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 560M
    Driver Version: 9.18.13.697
    Driver Date: 20121002000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 560M
    Video Card Memory: -2047 MB
    Serial number: 92628077745082451425
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
    Temporary file path: C:\Users\Owner\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 931.4G, 511.4G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
       AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265  
       AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
       AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
       AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
       AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
       ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20  
       aif_core.dll   AIF   2.0   53.422628
       aif_ogl.dll   AIF   2.0   53.422628
       amtlib.dll   AMTLib (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
       AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
       Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
       BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
       data_flow.dll   AIF   2.0   53.422628
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
       FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_flow.dll   AIF   2.0   53.422628
       image_runtime.dll   AIF   2.0   53.422628
       JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1263  
       MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS5.1   CS5.1  
       Plugin.dll   Adobe Photoshop CS5   CS5  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.5.0.232  
       PSArt.dll   Adobe Photoshop CS5.1   CS5.1  
       PSViews.dll   Adobe Photoshop CS5.1   CS5.1  
       SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
       tbb.dll   Threading Building Blocks   2, 1, 2009, 0201  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
       wu3d.dll   U3D Writer   9.3.0.113  
    Installed plug-ins:
       3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 6.7
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Color Halftone 12.0.2
       Colored Pencil 12.0
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Craquelure 12.0
       Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       De-Interlace 12.0.2
       Dicom 12.0
       Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Embed Watermark 4.0
       Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Extrude 12.0.2
       FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Grain 12.0
       Graphic Pen 12.0
       Halftone Pattern 12.0
       HDRMergeUI 12.0
       IFF Format 12.0.2
       Ink Outlines 12.0
       JPEG 2000 2.0
       Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Lens Blur 12.0
       Lens Correction 12.0.2
       Lens Flare 12.0.2
       Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Liquify 12.0.1
       Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mezzotint 12.0.2
       Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mosaic Tiles 12.0
       Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Neon Glow 12.0
       Note Paper 12.0
       NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Ocean Ripple 12.0
       OpenEXR 12.0.2
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Paths to Illustrator 12.0.2
       PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Photocopy 12.0
       Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Pinch 12.0.2
       Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Poster Edges 12.0
       Radial Blur 12.0.2
       Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.1
       Shear 12.0.2
       Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Sumi-e 12.0
       Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Targa 12.0.2
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Underpainting 12.0
       Vanishing Point 12.0
       Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Wind 12.0.2
       Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       ZigZag 12.0.2
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
    Installed TWAIN devices: NONE

  • Image problem in V4.0

    Hi,
    Previously I had lots of problems with showing a BLOB image from a table
    in a report using the apex_util.get_blob_file_src function.
    Varad put me right on several ocassions: see the thread at
    Confusion with get_blob_file_src
    Eventually everything went well, and I got my images of a specific size on the screen.
    In the last month or two, the host database that I rent went up from version ten to version
    eleven, and the apex version changed too from 3.2.1 to some version of 4.
    I've only now discovered that the images don't display any more. I've re-read the thread
    mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
    so my current guess is that something has changed when Apex went to its new version.
    Can anyone point me in the right direction regarding Image problems in version 4 ?
    I guess I'm not the first to experience such issues, and a checklist of things to try would
    be most welcome.
    I've done a View->Source on the page that doesn't work, and the issue with a missing value
    for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
    src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
    Suggestions welcomed please; thankyou in advance.
    Mungo

    Hi Folks,
    I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
    post it here.
    I read various other threads and stumbled across:
    PDF viewing with  apex_util.get_blob_file_src not working with 4.0
    PDF viewing with  apex_util.get_blob_file_src not working with 4.0 &# 4404695
    That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
    an "Automated Row PROCESSING" process too.
    I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
    Automated Row Fetch process and the damn thing worked!
    Haven't got a clue why on earth either of these are requirements on a page that is selecting data
    from the database - I don't understand where such processes are called in the big scheme of things.
    That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
    Happy to be corrected on any points.
    Regards until the next crisis...
    Mungo :-)
    P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
    reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
    Suggestions?
    Edited by: MungoHenning on Sep 15, 2010 1:39 PM

  • Need help with image upload and preview display

    hi guys,
    I'm trying to upload image and then display it as a preview, but when upload form submits to the same page image placeholder does not refreshes it's source and displays the same image as before.
    Image 4.jpg already exists.
    I upload it with nameConflict = "overwrite"
    upload form points to the same page, therefore page reloads
    In IE image placeholder does not display the new image, but shows the old one until I refresh the page with F5 and resend information, however if checked, image in the file is already different.
    In Firefox, sometimes it works and image refreshes, sometimes not.
    any help would be greatly appreciated!
    cheers,
    Simon

    Hi Daverms,
    With your code you suggest to not only upload the image but make a database entry too. However my intention is to firstly upload the file, and show a preview. Then if user is satisfied with what he sees, he presses "aprove" button and therefore makes a datase entry. Then the photo number will increase by one.
    Until user is not aproving the photo he can upload any image again and again, but the new image will be always given the same name (example 4.jpg) and overwriting the old one.
    I believe the problem persists because browsers are loading image with the same name from the cache, and not from the actual location. Therefore when I refresh the page it catches the correct image.
    If I follow your code, every time I upload the image, name of it is different, therefore browser cannot find it in the cache and is forced to load one from the server.
    I wonder is there any way to avoid this cache problem?
    cheers,
    Simon

  • Problem with a display lighting

    Problem with a display lightring. What is it and how can I solve it?
    Thanks!
    Mikhail

    suppose the table is itab with columns A and B,
    so ur data is like wa-A and wa-B.
    now use a table node to loop at itab into wa.
    now create two rows with line type having single column.
    loop
    ROW1 -
    print wa-A
    ROW2
    print wa-B.
    endloop.
    this way u'll get ur data vertically

  • In Answers Chart Images can't be displayed

    Installed BIEE 10.1.3.3.2, run demo, in Answers the chart images can not be displayed.

    Hi,
    I am having this problem too, installing the ActiveX component hasn't fixed this for me. Everything else works fine but when I try and display a chart the image just displays a red cross?
    Any help would be much appreciated,
    John

  • Strange short-term persistent image problem

    Hello,
    I'm well aware of the typical image persistence problem, where an image can stay "burned in" after the monitor displays the same thing for hours on end.
    I have a much shorter-term persistent image problem. Let's say I open a web-page, leave it open for 10 seconds and then open a new window in Safari (thus getting a pure white page). Well when that happens, the previous web-page is still shadowed on the new white.
    30 seconds later it has faded, but then the same thing will happen again with anything else that's displayed.
    Any ideas?
    thanks
    Loa

    Huh, now I'm really stumped. The cyan border is also present in FCE once I render, but it doesn't seem to happen for each instance when the paper image is used. Did you import the paper image as a .gif or something else? And did you add any filters to it? Did you also add any effects? The only I'm using with the paper image is the page peel and I have not tried any other effects to see if the cyan effect comes up.
    I've put a screen capture of my FCE project showing the cyan border present in the canvas as my movie is playing. Its on my idisk as FCE movie problem.tiff
    http://idisk.mac.com/gindacu-Public?view=web
    Thanks again for the help.

  • Image deletion won't display in browser

    Hey everyone, simplly put I am displaying a picture I have created to the user, after it is displayed I wish to delete it from my drive, the only problem is that the image is deleted before it is displayed, i want it the other way round.
    I have created a servlet program which creates the image and sends it to a jsp page where it is displayed. After the code that displays the image executes I create a class where I delete the file. In a perfect world the image would still be displayed in the browser as the file is deleted behind the scenes but in this case the code to delete it deletes it before it is displayed, I have tried a few things including putting the thread to sleep for a few seconds and then deleteing the file, all to no avail. Any ideas?
    thanks

    Putting the servlet to sleep won't help.
    The request for the image is made seperately to the servlet call.
    The browser can only request the image once it has received the html page.
    Obviously it needs time to receive the html page, send a request back for the image, and then have time to download it before you delete it.
    I think the best method would be to schedule a process that deletes image files from a directory (for example) every five minutes (based on their timestamp of file.lastModified() so you don't delete any current ones)
    Good luck,
    evnafets

  • Passwords and images problem

    Firefox image problem. In Firefox 3.6.12, every time I save an image that's already displayed on my screen, I see "one active download" appear in the bottom right of Firefox's window and the same image is also listed in downloads. The problem is that Firefox doing that uses more bandwidth. How do I set Firefox so that when I save an image, instead of that image getting re-downloaded from where it's stored on the internet, it's copied from wherever Firefox has it stored to display it so Firefox doesn't use as much bandwidth? Tools/options/advanced/network/offline storage is set to 50mb.
    Firefox password problem. Tools/options/security/passwords has "remember passwords for sites" checked and there is nothing in my exceptions list. But Firefox keeps forgetting passwords, usually after restarting Firefox and or my whole system and on some sites, I don't even get asked "do you want to remember..." How do I fix this?
    I do have CCleaner and it's set to run at startup, but all the boxes for Firefox are unchecked, so it's not the cause of either problem.

    @cor-el
    OK, I'll give that extension a try and see what happens, thanx! :-)
    @venemovil
    I right click and either select "save image as" or if I want to save an image to more than one location, I select "view image" and then use ctrl+s. Both results in Firefox re-downloading the image as I described above. It happens on every site I visit.
    The password problem never happened before, but I will try disabling my extensions one at a time and see if it happens only whan a particular extension is turned on.
    This is a screenshot of the extensions I do have installed.
    http://i273.photobucket.com/albums/jj216/Moonbarker/Clipboard01.jpg
    I've also noticed that Firefox is forgetting what sites I've visited recently (I type in part of the url of sites I've visited sometimes as recently as a few hours ago and the entire url isn't in the suggested list) and I keep having to put the Fire FTP Button back in the toolbar (next to the home/stop/reload/back-forward buttons). That may be related to the pasword problem. I don't know.

  • After updating to OS X 10.8.3, remote images fail to be displayed in Mail

    After updating to OS X 10.8.3, images fail to be displayed in Mail regardless of setting in "Display remote images in HTML messages".
    Any clue ?

    I'm also having this problem.  Help?

Maybe you are looking for