Bursted Output does not show the data.

I have bursted a report to shared location. The output file gets bursted to the destinated location but it is empty without data.when i click view i am able to see the output with data. i have split the data and delivered to 3 folders in shared drive. am getting the empty
files in all 3 folders.
am using BIP 10.1.3.3.1 version.
Kindly help me in resolving this issue.
Regards,
Vinoth.

10.1.3.3.1 version is very old version, I would suggest to try against latest version.

Similar Messages

REUSE_ALV_GRID_DISPLAY does not show the data

Hello,
I have created a report which show the alv through REUSE_ALV_GRID_DISPLAY.
It is working fine on my development server and show the data too. but when it was transported to the production , ALV is showing, but no data in tha alv.
I check the data in the internal table , Data is available but it still not shown..

PERFORM create_field_catalog.
* display ALV Grid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = sy-repid
      i_callback_user_command = k_double_click
      it_fieldcat             = gi_field_cat
      i_default               = k_x
      i_save                  = k_a
      i_grid_title            = text-015
    TABLES
      t_outtab                = gi_woplo
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE i270(zcg340). "Problem occured in Creating ALV.
ENDIF.
I have check the transport too, there is no change in the table field nor in any code in the production .
But for the layout there is layout set to Default.. ..

Nokia N8 Calendar Does not Show the Dates????

Hi,
I am noticing this issue from the past couple of weeks and probably after the last update.
When I open the calendar Icon, the dates do not load on the phone. It just doesnt show any dates?
Also if a reminder is past, it shows a past reminder and the reminder also doesnt open up.
Whenever I do the hard re-boot i.e keep the power button pressed till it vibrates three times and shuts and re-starts, then initially the calendar shows the dates, but again after sometime if I have to open the calendar, it doesnt show the dates at all, and goes back to the same issue.
Please advise a good solutiong to this problem as a hard re-boot or a re-start or even re-setting the factory settings did not work
Thanks

Someone from the Nokia forum please respond to this as I am facing this issue too from quite sometime now. Its exactly he same.

SelectOneMenu does not show the data from the backing bean

Here is my code:

<h:inputText id="dir"
value="#{myBean.sourceDirectory}"/>

<h:commandButton value="fetch"
actionListener="#{myBean.processFetch}" />

<h:selectOneMenu value="#{myBean.selection}">
<f:selectItems value="#{myBean.dirs}"/>
</h:selectOneMenu>
public class MyBean{
private String sourceDirectory;
private ArrayList<SelectItem> dirs;
public String getSourceDirectory(){
return sourceDirectory;
public void setSourceDirectory(String newDir){
this.sourceDirectory = newDir;
public ArrayList<SelectItem> getDirs(){
return dirs;
public void setDirs(ArrayList<SelectItem> newDirs){
this.dirs = newDirs;
public void processFetch(ActionEvent e){
//For this example, we return some hard coded values
dirs = new ArrayList<SelectItem>();
SelectItem s1 = new SelectItem();
s1.setLabel(sourceDir + "_1");
SelectItem s2 = new SelectItem();
s2.setLabel(sourceDir + "_2");
SelectItem s3 = new SelectItem();
s3.setLabel(sourceDir + "_3");
SelectItem s4 = new SelectItem();
s4.setLabel(sourceDir + "_4");
dirs.add(s1);
dirs.add(s2);
dirs.add(s3);
dirs.add(s4);
When I run the above code, I notice that the first time, (and the only time), if I hit the "fetch" button the data in the drop-down menu does get refreshed.
Subsequently, it does not change. I am not sure what I am doing wrong.
Can someone help me?

Hi,
In order to use the JDBC persistence store you have to use a non XA JDBC driver for your Data Source.
http://docs.oracle.com/cd/E23943_01/web.1111/e13701/store.htm#CNFGD221
Point-13). When configuring a connection pool to use with WebLogic JMS JDBC Store, use non-XA database drivers.
http://middlewaremagic.com/weblogic/?p=586
Hope it helps

Peristent Store does not show the Data Source in Wenlogic 12.1.3

Hi All,
I have installed WebLogic 12.1.3 on my windows machine using Java 8 and am trying to configure the Data Source and Persistent Store (of JDBC type).
I'm able to create a Generic Data Source of type - *Oracle's Driver (Thin) for Instance connections;Versions:Any. The test connection also was successful.
When i proceed with the creation of a Persistent Store - JDBC type, the Data Source created is not getting populated in the drop down across Data Source label.
Any suggestions as to why this is happening?? or What needs to be done by me to fix this issue?
I'm unable to proceed further with my configuration due to this.

Hi,
In order to use the JDBC persistence store you have to use a non XA JDBC driver for your Data Source.
http://docs.oracle.com/cd/E23943_01/web.1111/e13701/store.htm#CNFGD221
Point-13). When configuring a connection pool to use with WebLogic JMS JDBC Store, use non-XA database drivers.
http://middlewaremagic.com/weblogic/?p=586
Hope it helps

Text box does not display the date??

I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
Thanks

Its a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram.

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

Not showing the Data in VC application

Hi I have developed the application in VC.
It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
Next day after i run the application , it is not showing the data. displaying the message .
"No Data Found".
But when i run the BAPI at the back end R/3 it is giving the data properly.
Can u tell me what might be the problem
REgards
Vijay

Hi Krishna,
check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
Check it with external debugging of the BAPI, when you can reconstruct the error.
Best Regards,
Marcel

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

BBP_MON_SC : does not show the details of the Shopping cart

Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.

Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers.

Bursted Output does not show the data.

Similar Messages

Maybe you are looking for