Bursting program errors when no data - Check output before bursting

Hello experts,
I have a XML Publisher Report with a Data Template + Bursting Control File.
This works perfectly when there is data.
But, when there is no data, main concurrent program completes successfully but the Bursting concurrent Program errors.
This is mainly because I am selecting the email address dynamically based on the data.
+ Is there a way I can check the xml output before submitting bursting program from PL/SQL package.
Log file does not show any error:
Here is the content of the log file for reference:
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 09-OCT-2012 11:38:06
XML/BI Publisher Version : 5.6.3
Updating request description
Retrieving XML request information
Preparing parameters
Set Bursting parameters..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=2669035, user-variable:cp:language=en, user-variable:cp:responsibility=25182, user-variable.OA_MEDIA=http://hcc-928.hullcc.gov.uk:8045/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=, user-variable:cp:parent_request_id=2669035, user-variable:cp:locale=en-US, user-variable:cp:user=DURBHAKAV01, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=2669036, user-variable:cp:org_id=83, user-variable:cp:reportdescription=XXHCC OLM Course Confirmation Letter}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Thanks
Vinod
Edited by: Vinod on Oct 15, 2012 1:52 PM

Follow up update:
I have applied the patch 8594771 ( p8594771_11i_GENERIC) but there is no difference.
Error still exists.
Checked the OPP log but not much help there.
OPP logfile shows this error:
org.xml.sax.SAXParseException: <Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
Any inputs??
Thanks,
Vinod

Similar Messages

Bursting program errors and last info on log file is: Start bursting proces

Hi,
I am new to bursting concepts. I created bursting file for the invoice and invoice program runs and calls the burst program and burst program errors.
Can you help? I have set the temp directory as /var/tmp
XML/BI Publisher Version : 5.6.3
Request ID: 16757790
All Parameters: ReportRequestID=16757789:DebugFlag=Y
Report Req ID: 16757789
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ODBTST
Preparing parameters
null output =/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757790.out
inputfilename =/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757789.out
Data XML File:/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757789.out
Set Bursting parameters..
Temp. Directory:/var/tmp
[102110_093551746][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[102110_093551752][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.3 of 9 Barcode.normal.normal=truetype./usr/local/oracle/fonts/3OF9.TTF, system-temp-dir=/u01/oracle/devcomn/temp, user-variable:cp:parent_request_id=16757789, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=16757790, user-variable.OA_MEDIA=http://oapdev.pdcorp.com:8001/OA_MEDIA, font.GnuMICR.normal.normal=truetype./usr/local/oracle/fonts/GnuMICR.ttf, user-variable:cp:org_id=81, user-variable:cp:DebugFlag=Y, user-variable:cp:responsibility=50290, user-variable:cp:user=NATHANV, user-variable:cp:reportdescription=PD Invoice Burst, user-variable:cp:language=en, user-variable:cp:ReportRequestID=16757789, font.Free 3 of 9 Extended.normal.normal=truetype./usr/local/oracle/fonts/FRE3OF9X.TTF, user-variable:cp:locale=en-US, user-variable:cp:territory=US}
Start bursting process..
Start of log messages from FND_FILE
End of log messages from FND_FILE
---------------------------------------------------------------------------

i have few BG jobs running at backend, but i dont think that could be a problem. I have these jobs running
ESH_IX_PROCESS_CP_20100621051308
EU_PUT
EU_REORG
RPTMC_CREATE_CHANGEPOINT_AUTH
i cancelled the last one and first job is for trex indexing for changed object i SAP hR master data. middle two i dont know the purpose.
do you think these could be problem?
Mani

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". The data type is "D" in the dataset, but "C" in the program.
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
 Jaume Saumell
Message was edited by:
 Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Windows 7: CS6: Getting a Program Error when flipping foreground and background colors

Yesterday, I started getting an error when trying to set the default colors and then flipping them. I also get a program error when I try to click on the foreground color and manually assigning it with white.
This is a Windows 7 Ultimate, with PS CS6.
I closed the program twice and ran into the same problem, then rebooted and got the same errors. As far as I can tell, this is the only tool or feature acting up, other than the actions which have this step in them.
Looking for an easy fix first, of course. Like maybe deleting the Prefs file? Mac people seem to have to do that regularly.
But, if nothing works, will I need to uninstall PS and reinstall it? Would that also mean I'd have to install all of my filter packages again, too?
Thanks in advance,
M. Jackson

Noel,
To date, I have only restarted PS, and only rebooted and restarted PS.
I have not done any other steps. I am open to anything that keeps me from having to reload, mainly because of all of the filters, presets, actions, and so forth I'd have to find to reload from scratch.
And, please note, I am on a PC. The Command-Shift-Option is a Mac command. I assume, on a PC that would be Control-Shift-Alt?
Thanks again,
Mike Jackson

Error when sending data request

Hi All,
   i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
   rfc to source system successful showing with ash status
   data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
    it is showing technical status with red as processing overdue
                       processing step call to source system
   so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.

Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear

Error when getting data (RSDRI_CUBE_READ) - RSCRM_BAPI

Hello Gurus,
 I am getting a error when I try to create a extract using RSCRM_BAPI using Process Chain.
 I created a job and used that in the Process Chain, Once I run the Process Chain it is executing and
 the job is deleted and the extract gives me this error in the Monitor.
 Error Message - Error when getting data (RSDRI_CUBE_READ)
 If I run manually I am able to see the extracted records.
 Please help.
Regards,
Raj

Hi,
"Unknown error when executing MDX" is msg number BRAINOLAPAPI012.
Check out these 3 SAP notes:
1091523 MDX: System error in connection with named sets
1252372 OLE DB for OLAP: Additional corrctions for new MDX parser
1282785 MDX: System error "Invalid MDX command with <internal>
Also test in transaction MDXTEST to see if your statements are syntactically correct.
Rgds,
Colum

Activating DemoContent: Error when reading data target

I'm trying to activate the SAP Demo cube Purchasing Data (0D_PU_C01). The Grouping Mode is set to In Dataflow Before and Afterwards.
When I simulate installation, I get the error message Error when reading data target 0D_PU_C01 (Message no. RSAU126) in the logs (although in the Collection Area the Simulation Result column is marked with a green check).
I could find only 2 notes related to this error in the SAP Service Marketplace. SAP note nr. 540873 is about the BW indexing job. Note nr. 587796 (Error in after import of update rules) seams more appropriate, however not thoroughly right. In fact it refers to BW 3.1 Content or BW 3.0B.
My system version instead is:
BI_CONT 353
SAP_BW 350
The very same problem occurs when I try to activate the SAP Demo Sales and Distribution.
Any suggestion?
Thanks, Davide

Ok, it worked! Now however I have some more doubts.
1. I can't find the InfoObjects (e.g. 0D_GR_QTY, 0D_PLANT, 0D_MATERIAL, etc.) anywhere in Modeling -> InfoObjects, even if:
a) I can find them under the InfoSource tree of the SAP Demo Application Component
b) they appear activated in Business Content
What's going on?
2. The newly activated Purchasing Data cube has been added to the Unassigned Nodes InfoArea, and not to a newly created SAP Demo Purchasing (0D_MMPUR) InfoArea, similarly to the structure I saw when collecting the InfoProvider in Business Content. Is this the normal behaviour?
3. No DataSource has been assigned to any of the InfoSources. I read at:
http://help.sap.com/saphelp_erp2004/helpdata/en/43/57df37463a126ae10000009b38f842/content.htm
that the SAP Demo Source System will be used. What I can't understand is if I need to manually create and select this Source System. I thought it would be automatically created and assigned during the Business Content's cube activation. This is not the case. What steps would I have needed to perform?
Davide

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Color picker does not work, " program error when I click, photoshop cc

I am user of photoshiop cc and it worked fine until several days ago but suddenly it shows " program error " when I click color picker, and I can not use changing color. Please help me to resolve this issue.

There was a bug with photoshop CC concerning the color picker and its swatches. Make sure you have the latest version and then if it still exists, reset your tools in the upper left hand corner which would be the very first icon in the top tool bar. That should fix it. If not let us know and maybe someone can think of something else.

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error when reading data from socket

Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?

Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

IR webclient: error when uncompressing data retrieved: *Data Error*!

A small (?) number of IR webclient 931 installations we notice the next error when processing: " error when uncompressing data retrieved: *Data Error*! " It does not seem to be user or permission/provision related.
Does anyone have an idea how to solve it. Reinstalling the IR webclient does not solve it.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

Error when using data postion delay

I obtained this error when using data position delay. Can anyone please
tell me the reason why I can not configure the delay to be between 0.7
and 0.8.
Possible reason(s):
Driver Status: (Hex 0xBFFA403F) Unable to configure requested delay property given the current clock rate.
Ensure that the delay value specified is within the valid range for the
frequency specified or do not configure property for delay operation.
Device: PXI1Slot2
Property: Data Position
Sample Rate: 40000000.0
Requested Value: 0.71875
Supported Values: 0.000 through 0.200, 0.300 through 0.700, 0.800 through 1.000,
Status Code: -219401

Timothy,
The 656x devices have a limit on the available data delay values based
on frequency. Between 25MHz and 50MHz there are "holes" in the
available delay range. Above 50MHz, the full 0 to 1 data delay is
valid. If you look in the specifications installed with NI HSDIO
for the NI 656x, on page 7, Figure 1, there is an illustration showing
how to compute what the valid range is for the frequency of interest.
For example, at 40MHz, valid values are:
0 to 0.2
0.3 to 0.7
0.8 to 1
In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges.

Bursting program errors when no data - Check output before bursting

Similar Messages

Maybe you are looking for