Bus. Intelli. Std One: Part 1 of 2 - biseone_windows_x86_101321_dvd.z01

i've downloaded this file three times, when unzipped it always shows following message :
X The Compressed (zipped) Folder is invalid or corrupted.
someone at oracle pls re-check your uploaded file..

I faced a similar problem..The files to be downloaded are huge and many a times you will find it difficult to open/unzip them after downloading both the files. My suggestion is to download both the files using some Download Manager like the one provided from Sun or Download Accelerator Plus. I used the latter and I didn't face any problem. Hope this helps.
Thanks.

Similar Messages

  • Can I ask for a replace meant of iMac since yjere is a failure of one part every month. Last month lcd replied now optical drive.

    Can I ask for a replace meant of iMac since yjere is a failure of one part every month. Last month lcd replied now optical drive.
    Imac 27".
    i do not like the idea of repairing every month.
    Feel the imacs supplied to India are sub standard ones

    Folks have reported that the Apple policy is three major component failures and the Mac is replaced. For the first two the Mac is repaired. Apple would not risk alienating its customers from one of the most populated nations in the world, so its time to stop the "discriminating against the poor Indians and selling us sub-standard Macs" routine. Occasionally the universe aligns just right for there to be a Mac lemon. Folks in every country have experienced lemons. It is the hazard of manufacturing millions of Macs with even more millions of parts, all produced by different parts suppliers. And it is why the manufacturer's warranty exists.
    Speak to the vender about a replacement. If necessary call Apple Care and request that your warranty service call be escalated to Customer Relations. Politely, but firmly, explain the situation and stand your ground that the solution to make you a happy customer is to have the Mac replaced. Don't make threats, mention lawyers or claim that Apple discriminates against Indians. If you do, you will have lost your case and Apple will then work with you from a distance and follow it policies and procedures to the letter, regardless of whether it makes you happy.

  • How can I delete only one part of my xml file?

    Hello,
    I stored more than 100 users in only one xmltype column. For instance
    Create table agro(users XMLTYPE);
    ... and I inserted all users inside
    INSERT INTO agro values(XMLTYPE
    ('<?xml version="1.0" encoding="ISO-8859-1"?>
    <authentication><users><user>
    <name>cocoon</name>
    <password>cocoon</password>
    <role>admin</role>
    <title>Mr.</title>
    <firstname>Walter</firstname>
    <lastname>Cocoon</lastname>
    <company />
    <street />
    <zipcode />
    <city />
    <country>DE</country>
    <phone />
    <fax />
    <email />
    <bankid />
    <bankname />
    <accountid />
    </user>
    ... another user, etc.
    </users></authentication>'));
    Now I tried to delete only one part of this file. For example all persons with the name"cocoon".
    I used for this target the following statement:
    DELETE FROM agro agro
    WHERE agro.users.extract('authentication/users/user/text()').getStringVal()= 'cocoon';
    When I execute this statement, Oracle DB delete all users and not only with the name "Cocoon".
    How can I delete only one part of my xml file?
    Kind Regards
    M R

    This the expected behavoir. You uploaded a document containing multiple users and then asked XML DB to delete any documnet that contained a user with the name in question. The problem here is that you are creating a mega document that contains an aggregation of user documents but then trying to work with individual user documents. This is a bad idea.
    In general XML does not understand the concept of a collection of documents. It can only operate on one document at a time. Hence the tendancy to aggregate individual documents into a single larger document. Once you have an XML database, you can perform operations on collections of document, as easily as you can perform operations on individual documents, so the need to aggregate the individual documents together disappears.
    If you store each user document as a seperate document then your delete will work as expected.

  • Can I move just one part of a letter???

    Hi,
    Is it possible to move a piece of a letter from some text? I love the look of a particular font I am using, but I would like to move just one part of one letter up a little (just this once in this particular design).
    How can I do this? (See that bit of the n? I want to move it up.)
    THANKS!
    Magda

    Magda,
    You cannot simply change the letter while it is live Type; that requires your editing the font, which is possible with other applications.
    For individual instances, you may Type>Create Outlines, Direct Select the part, and move it.

  • Netbeans creating wsdl file having message with more than one part...

    Hi,
    I am using netbeans 6.0.1. I made an xml schema, then I wanted to make an wsdl that uses that schema.
    I wanted to put in a message more parts(3), and it would not let me. Then, i made the message with just one part, and added the other parts afterwards.
    But now, when I try to make a web service from that wsdl, it says that there is no service in the specified wsdl file.
    And if i let that message with just one part, it will make the Web Service.
    here is the xml schema and the wsdl file:
    XML Schema:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    targetNamespace="http://xml.netbeans.org/schema/Abruf38"
    xmlns:tns="http://xml.netbeans.org/schema/Abruf38"
    elementFormDefault="qualified">
    <xsd:complexType name="FormRequest">
    <xsd:sequence>
    <xsd:element name="newRequest" type="xsd:boolean"/>
    <xsd:element name="requestNumber" type="xsd:int"/>
    <xsd:element name="vehicleClass" type="xsd:string"/>
    <xsd:element name="vehiclesNumber" type="xsd:int"/>
    <xsd:element name="prefferedType" type="xsd:string"/>
    <xsd:element name="kombi" type="xsd:boolean"/>
    <xsd:element name="usageMission" type="xsd:boolean"/>
    <xsd:element name="usageEducation" type="xsd:boolean"/>
    <xsd:element name="usageGeneral" type="xsd:boolean"/>
    <xsd:element name="usageOthers" type="xsd:string"/>
    <xsd:element name="eqVehicle" type="xsd:boolean"/>
    <xsd:element name="eqDangerous" type="xsd:boolean"/>
    <xsd:element name="eqPlaneSpriegel" type="xsd:boolean"/>
    <xsd:element name="eqBegrstll" type="xsd:boolean"/>
    <xsd:element name="eqMSitzBTruck" type="xsd:boolean"/>
    <xsd:element name="eqVerzurrAusst" type="xsd:boolean"/>
    <xsd:element name="eqOthers" type="xsd:string"/>
    <xsd:element name="bringService" type="xsd:boolean"/>
    <xsd:element name="holService" type="xsd:boolean"/>
    <xsd:element name="chauffService" type="xsd:boolean"/>
    <xsd:element name="otherService1" type="xsd:string"/>
    <xsd:element name="otherService1Chk" type="xsd:boolean"/>
    <xsd:element name="otherService2" type="xsd:string"/>
    <xsd:element name="otherService2Chk" type="xsd:boolean"/>
    <xsd:element name="otherService3" type="xsd:string"/>
    <xsd:element name="otherService3Chk" type="xsd:boolean"/>
    <xsd:element name="activity" type="xsd:string"/>
    <xsd:element name="costPayer" type="xsd:string"/>
    <xsd:element name="costCenter" type="xsd:string"/>
    <xsd:element name="vehicleCost" type="xsd:float"/>
    <xsd:element name="chauffServiceCost" type="xsd:float"/>
    <xsd:element name="holBringServiceCost" type="xsd:float"/>
    <xsd:element name="totalCost" type="xsd:float"/>
    <xsd:element name="tripPurpose" type="xsd:string"/>
    <xsd:element name="fixTermin" type="xsd:boolean"/>
    <xsd:element name="justificationFix" type="xsd:string"/>
    <xsd:element name="requestID" type="xsd:string"/>
    <xsd:element name="rentalPeriod" type="tns:RentalPeriod"/>
    <xsd:element name="carPool" type="tns:CarPool"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="CarPool">
    <xsd:sequence>
    <xsd:element name="poolID" type="xsd:string"/>
    <xsd:element name="poolName" type="xsd:string"/>
    <xsd:element name="orgNumber" type="xsd:string"/>
    <xsd:element name="vehicle" maxOccurs="unbounded" type="tns:Vehicle"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="RentalPeriod">
    <xsd:sequence>
    <xsd:element name="rentalPeriodID" type="xsd:string"/>
    <xsd:element name="startDate" type="xsd:date"/>
    <xsd:element name="endDate" type="xsd:date"/>
    <xsd:element name="startTime" type="xsd:time"/>
    <xsd:element name="endTime" type="xsd:time"/>
    <xsd:element name="startLocation" type="xsd:string"/>
    <xsd:element name="endLocation" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Vehicle">
    <xsd:sequence>
    <xsd:element name="vehicleID" type="xsd:string"/>
    <xsd:element name="vehicleClass" type="xsd:string"/>
    <xsd:element name="vehicleRegisterNo" type="xsd:int"/>
    <xsd:element name="vehicleType" type="xsd:string"/>
    <xsd:element name="seatsNumber" type="xsd:int"/>
    <xsd:element name="cost" type="xsd:float"/>
    <xsd:element name="available" type="xsd:boolean"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Contact">
    <xsd:sequence>
    <xsd:element name="contactID" type="xsd:string"/>
    <xsd:element name="contactName" type="xsd:string"/>
    <xsd:element name="telNumber" type="xsd:int"/>
    <xsd:element name="faxNumber" type="xsd:int"/>
    <xsd:element name="loNo" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Person">
    <xsd:sequence>
    <xsd:element name="personID"/>
    <xsd:element name="department" type="xsd:string"/>
    <xsd:element name="serviceNumber" type="xsd:int"/>
    <xsd:element name="contact" type="tns:Contact"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Department">
    <xsd:sequence>
    <xsd:element name="departmentID" type="xsd:string"/>
    <xsd:element name="fundsDepartment" type="xsd:string"/>
    <xsd:element name="mvwdst" type="xsd:int"/>
    <xsd:element name="distributionNumber" type="xsd:int"/>
    <xsd:element name="contact" type="tns:Contact"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:element name="formRequestElement" type="tns:FormRequest"/>
    <xsd:element name="personElement" type="tns:Person"/>
    <xsd:element name="departmentElement" type="tns:Department"/>
    <xsd:element name="vehicle" type="tns:Vehicle"/>
    <xsd:element name="loadFormReturn" type="xsd:boolean"/>
    <xsd:element name="editFormReturn" type="xsd:boolean"/>
    </xsd:schema>
    Wsdl File:
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="userWS" targetNamespace="http://j2ee.netbeans.org/wsdl/userWS"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://xml.netbeans.org/schema/Abruf38" xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype" xmlns:tns="http://j2ee.netbeans.org/wsdl/userWS" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types>
    <xsd:schema targetNamespace="http://j2ee.netbeans.org/wsdl/userWS">
    <xsd:import namespace="http://xml.netbeans.org/schema/Abruf38" schemaLocation="Abruf38.xsd"/>
    </xsd:schema>
    </types>
    <message name="loadFormRequest">
    <part name="formRequest" element="ns:formRequestElement"/>
    <part name="person" element="ns:personElement"/>
    <part name="department" element="ns:departmentElement"/>
    </message>
    <message name="loadFormReply">
    <part name="retVal" element="ns:loadFormReturn"/>
    </message>
    <portType name="userWSPortType">
    <operation name="loadForm">
    <input name="input1" message="tns:loadFormRequest"></input>
    <output name="output1" message="tns:loadFormReply"/>
    </operation>
    </portType>
    <binding name="userWSBinding" type="tns:userWSPortType">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="loadForm">
    <soap:operation/>
    <input name="input1">
    <soap:body use="literal"/>
    </input>
    <output name="output1">
    <soap:body use="literal"/>
    </output>
    </operation>
    </binding>
    <service name="userWSService">
    <port name="userWSPort" binding="tns:userWSBinding">
    <soap:address location="http://localhost:18181/userWSService/userWSPort"/>
    </port>
    </service>
    <plnk:partnerLinkType name="userWS1">
    <!-- A partner link type is automatically generated when a new port type is added. Partner link types are used by BPEL processes.
    In a BPEL process, a partner link represents the interaction between the BPEL process and a partner service. Each partner link is associated with a partner link type.
    A partner link type characterizes the conversational relationship between two services. The partner link type can have one or two roles.-->
    <plnk:role name="userWSPortTypeRole" portType="tns:userWSPortType"/>
    </plnk:partnerLinkType>
    </definitions>
    The message that Netbeans says when trying to put more parts to the message is:
    WS-I Basic Profile Rule R2210: If a document-literal binding in a DESCRIPTION does not specify the parts attribute on a soapbind:body element, the corresponding abstract wsdl:message MUST define zero or one wsdl:parts.
    Please...I am desperate, cause I am pressed by time!
    Can anyone tell me how can I make it work. Cause it is very common to use a Web service operation that has more than ONE parameter.
    I am waiting for your replys!

    Hi,
    Change the <soap:binding style="document"... to <soap:binding style="rpc"... and see if that works.
    I'm not sure how to get <soap:binding style="document"... working yet - I'm not that experienced in web services yet.
    Hope this helps and is not too late.
    Regards,
    Greg Nye

  • I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

    I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

    In your library, right-click the song you want to edit.
    select "get info".
    go to "options" and select the start and stop times for your first section of the song.
    click "OK".
    Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
    The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
    Now you can go back to the other version and repeat the process with a different  start/stop time.
    Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
    To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

  • Proxy generation terminated: Message must have exactly one part

    hi experts,
    i have tryed to create a proxy in abap but it gives an error message
    Proxy generation terminated: Message must have exactly one part
    Message no. SPRX046
    can any one help me
    the wsdl document is
    - <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions">
    &#8722;
         <wsdl:types>
    &#8722;
         <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
    &#8722;
         <xsd:simpleType name="char1">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="1"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char10">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="10"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char100">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="100"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char20">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="20"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char220">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="220"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char30">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="30"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char32">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="32"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="char50">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="50"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="clnt3">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="3"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="numeric15">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="15"/>
    <xsd:pattern value="\d*"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="numeric3">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="3"/>
    <xsd:pattern value="\d*"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:simpleType name="numeric6">
    &#8722;
         <xsd:restriction base="xsd:string">
    <xsd:maxLength value="6"/>
    <xsd:pattern value="\d*"/>
    </xsd:restriction>
    </xsd:simpleType>
    &#8722;
         <xsd:complexType name="ZCAF_DEP_QUEST">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="DEPQTN_ID" type="tns:numeric15"/>
    <xsd:element name="QTNID" type="tns:numeric15"/>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_ANSWER_META">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="HAS_COMMENT" type="tns:char1"/>
    <xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
    <xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
    <xsd:element name="NA_POSSIBLE" type="tns:char1"/>
    <xsd:element name="DATA_TYPE" type="tns:char1"/>
    <xsd:element name="VALUE_TYPE" type="tns:char1"/>
    <xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_QUEST_GROUP">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="QTNGRPID" type="tns:numeric15"/>
    <xsd:element name="TITLE" type="tns:char30"/>
    <xsd:element name="REPLACE_TEXT" type="tns:char30"/>
    <xsd:element name="LANGUAGE" type="tns:char10"/>
    <xsd:element name="DESCRIPTION" type="tns:char30"/>
    <xsd:element name="HEADER_TEXT" type="tns:char20"/>
    <xsd:element name="CREATED_BY" type="tns:char20"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="RELEASE_STATUS" type="tns:char10"/>
    <xsd:element name="VERSION" type="tns:char10"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_COMMENT_ANS">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="COMMENT_ANS_ID" type="tns:numeric15"/>
    <xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    <xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_ANS_CHOICE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="HAS_COMMENT" type="tns:char1"/>
    <xsd:element name="SEQ_NUM" type="xsd:int"/>
    <xsd:element name="ANSWER_TEXT" type="tns:char50"/>
    <xsd:element name="LANGUAGE" type="tns:char10"/>
    <xsd:element name="WEIGHT" type="xsd:int"/>
    <xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
    <xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_QUESTION">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="QTNID" type="tns:numeric15"/>
    <xsd:element name="QTNGRPID" type="tns:numeric15"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="QTN_TEXT" type="tns:char100"/>
    <xsd:element name="LANGUAGE" type="tns:char10"/>
    <xsd:element name="CREATED_BY" type="tns:char20"/>
    <xsd:element name="QTNWEIGHTAGE" type="xsd:int"/>
    <xsd:element name="VERSION" type="tns:char10"/>
    <xsd:element name="RELEASE_STATUS" type="tns:char10"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_MULTI_ANS">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="MULTIPLE_ANS_ID" type="tns:numeric15"/>
    <xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    <xsd:element name="ANSWER_TEXT" type="tns:char50"/>
    <xsd:element name="ANS_VALUE" type="xsd:int"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_COMENT_TEXT">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
    <xsd:element name="TEXT_COMMENT" type="tns:char50"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_DEP_QTNGRP">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="DEP_QTNGRP_ID" type="tns:numeric15"/>
    <xsd:element name="QTNGRPID" type="tns:numeric15"/>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_ANS_SHEET">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
    <xsd:element name="QTNRID" type="tns:numeric15"/>
    <xsd:element name="STATUS" type="tns:char1"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_QTNR_QTNGRP">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="QTNRID" type="tns:numeric15"/>
    <xsd:element name="QTNGRPID" type="tns:numeric15"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_QUESTIONIRE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="MANDT" type="tns:clnt3"/>
    <xsd:element name="QTNRID" type="tns:numeric15"/>
    <xsd:element name="TITLE" type="tns:char30"/>
    <xsd:element name="REPLACE_TEXT" type="tns:char30"/>
    <xsd:element name="LANGUAGE" type="tns:char10"/>
    <xsd:element name="DESCRIPTION" type="tns:char30"/>
    <xsd:element name="HEADER_TEXT" type="tns:char20"/>
    <xsd:element name="CREATED_BY" type="tns:char20"/>
    <xsd:element name="RELEASE_STATUS" type="tns:char10"/>
    <xsd:element name="VERSION" type="tns:char10"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="BAPIRET2">
    &#8722;
         <xsd:sequence>
    <xsd:element name="TYPE" type="tns:char1"/>
    <xsd:element name="ID" type="tns:char20"/>
    <xsd:element name="NUMBER" type="tns:numeric3"/>
    <xsd:element name="MESSAGE" type="tns:char220"/>
    <xsd:element name="LOG_NO" type="tns:char20"/>
    <xsd:element name="LOG_MSG_NO" type="tns:numeric6"/>
    <xsd:element name="MESSAGE_V1" type="tns:char50"/>
    <xsd:element name="MESSAGE_V2" type="tns:char50"/>
    <xsd:element name="MESSAGE_V3" type="tns:char50"/>
    <xsd:element name="MESSAGE_V4" type="tns:char50"/>
    <xsd:element name="PARAMETER" type="tns:char32"/>
    <xsd:element name="ROW" type="xsd:int"/>
    <xsd:element name="FIELD" type="tns:char30"/>
    <xsd:element name="SYSTEM" type="tns:char10"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZCAF_ST_GET_QUESTIONNAIRE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="QTNID" type="tns:numeric15"/>
    <xsd:element name="QTN_TEXT" type="tns:char100"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="HAS_COMMENT" type="tns:char1"/>
    <xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
    <xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
    <xsd:element name="NA_POSSIBLE" type="tns:char1"/>
    <xsd:element name="DATA_TYPE" type="tns:char1"/>
    <xsd:element name="VALUE_TYPE" type="tns:char1"/>
    <xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
    <xsd:element name="ANS_CHOICE" type="tns:ZTCAF_GET_ANS_CHOICE"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZSCAF_ANS_CHOICE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
    <xsd:element name="ANS_META_ID" type="tns:numeric15"/>
    <xsd:element name="HAS_COMMENT" type="tns:char1"/>
    <xsd:element name="SEQ_NUM" type="xsd:int"/>
    <xsd:element name="ANSWER_TEXT" type="tns:char50"/>
    <xsd:element name="LANGUAGE" type="tns:char10"/>
    <xsd:element name="WEIGHT" type="xsd:int"/>
    <xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
    <xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
    <xsd:element name="DEP_QTN" type="tns:ZTCAF_DEP_QTN"/>
    <xsd:element name="DEP_QTNGRP" type="tns:ZTCAF_DEP_QTN_GRP"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZTCAF_GET_DATA_QUESTIONNAIRE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_ST_GET_QUESTIONNAIRE"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZTCAF_GET_ANS_CHOICE">
    &#8722;
         <xsd:sequence>
    <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZSCAF_ANS_CHOICE"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZTCAF_DEP_QTN">
    &#8722;
         <xsd:sequence>
    <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QUEST"/>
    </xsd:sequence>
    </xsd:complexType>
    &#8722;
         <xsd:complexType name="ZTCAF_DEP_QTN_GRP">
    &#8722;
         <xsd:sequence>
    <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QTNGRP"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    </wsdl:types>
    &#8722;
         <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIRE">
    <wsdl:part name="IS_ANSCHOICE" type="tns:ZCAF_ANS_CHOICE"/>
    <wsdl:part name="IS_ANSMETA" type="tns:ZCAF_ANSWER_META"/>
    <wsdl:part name="IS_ANS_SHEET" type="tns:ZCAF_ANS_SHEET"/>
    <wsdl:part name="IS_COMM_ANS" type="tns:ZCAF_COMMENT_ANS"/>
    <wsdl:part name="IS_COMM_TXT" type="tns:ZCAF_COMENT_TEXT"/>
    <wsdl:part name="IS_DEPQTN" type="tns:ZCAF_DEP_QUEST"/>
    <wsdl:part name="IS_DEPQTNGRP" type="tns:ZCAF_DEP_QTNGRP"/>
    <wsdl:part name="IS_MULT_ANS" type="tns:ZCAF_MULTI_ANS"/>
    <wsdl:part name="IS_QTNR_QTNGRP" type="tns:ZCAF_QTNR_QTNGRP"/>
    <wsdl:part name="IS_QTN_GRP" type="tns:ZCAF_QUEST_GROUP"/>
    <wsdl:part name="IS_QUESTION" type="tns:ZCAF_QUESTION"/>
    <wsdl:part name="IS_QUESTIONNAIRE" type="tns:ZCAF_QUESTIONIRE"/>
    <wsdl:part name="IV_CHOICE" type="tns:char1"/>
    <wsdl:part name="IV_QTNR_ID" type="tns:numeric15"/>
    <wsdl:part name="IV_TYPE" type="tns:char10"/>
    </wsdl:message>
    &#8722;
         <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIREResponse">
    <wsdl:part name="ET_QTNR_GET_DATA" type="tns:ZTCAF_GET_DATA_QUESTIONNAIRE"/>
    <wsdl:part name="RETURN" type="tns:BAPIRET2"/>
    </wsdl:message>
    &#8722;
         <sap:Feature name="design_0 " uri="http://www.sap.com/webas/630/soap/features/authentication/">
    &#8722;
         <sap:Property qname="n0:AuthenticationLevel">
    <sap:Option value="n0:Basic"/>
    </sap:Property>
    </sap:Feature>
    &#8722;
         <wsdl:portType name="zwsquestionnaire">
    <sap:useFeature feature="tns:design_0 "/>
    &#8722;
         <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
    <wsdl:input message="tns:ZMCAF_CRUD_QUESTIONNAIRE"/>
    <wsdl:output message="tns:ZMCAF_CRUD_QUESTIONNAIREResponse"/>
    </wsdl:operation>
    </wsdl:portType>
    &#8722;
         <wsdl:binding name="zwsquestionnaireSoapBinding" type="tns:zwsquestionnaire">
    <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
    &#8722;
         <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
    <soap:operation soapAction=""/>
    &#8722;
         <wsdl:input>
    <soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
    </wsdl:input>
    &#8722;
         <wsdl:output>
    <soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>
    &#8722;
         <wsdl:service name="zwsquestionnaireService">
    &#8722;
         <wsdl:port name="zwsquestionnaireSoapBinding" binding="tns:zwsquestionnaireSoapBinding">
    <soap:address location="http://localhost:8000/sap/bc/srt/rfc/sap/ZWSQUESTIONNAIRE?sap-client=000"/>
    </wsdl:port>
    </wsdl:service>
    </wsdl:definitions>

    OK , could you please help me?
    SAP error message;
    Proxy generation terminated: Message must have exactly one part
    Diagnosis
    In a WSDL document, a <message> must contain exactly one <part>, therefore:
    <message name="check_serviceHttpGetIn">
    <part .../>
    </message>
    WSDL document;
    <?xml version="1.0" encoding="utf-8"?>
    <wsdl:definitions xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
       <wsdl:types>
         <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
           <s:element name="check_service">
             <s:complexType />
           </s:element>
           <s:element name="check_serviceResponse">
             <s:complexType>
               <s:sequence>
                 <s:element minOccurs="1" maxOccurs="1" name="check_serviceResult" type="s:boolean" />
               </s:sequence>
             </s:complexType>
           </s:element>
           <s:element name="get_puantaj_data">
             <s:complexType>
               <s:sequence>
                 <s:element minOccurs="0" maxOccurs="1" name="personel_sicilno" type="s:string" />
                 <s:element minOccurs="1" maxOccurs="1" name="yil" type="s:int" />
                 <s:element minOccurs="1" maxOccurs="1" name="ay" type="s:int" />
               </s:sequence>
             </s:complexType>
           </s:element>
           <s:element name="get_puantaj_dataResponse">
             <s:complexType>
               <s:sequence>
                 <s:element minOccurs="0" maxOccurs="1" name="get_puantaj_dataResult">
                   <s:complexType>
                     <s:sequence>
                       <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
                       <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
                     </s:sequence>
                   </s:complexType>
                 </s:element>
               </s:sequence>
             </s:complexType>
           </s:element>
           <s:element name="boolean" type="s:boolean" />
           <s:element name="DataTable" nillable="true">
             <s:complexType>
               <s:sequence>
                 <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
                 <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
               </s:sequence>
             </s:complexType>
           </s:element>
         </s:schema>
       </wsdl:types>
       <wsdl:message name="check_serviceSoapIn">
         <wsdl:part name="parameters" element="tns:check_service" />
       </wsdl:message>
       <wsdl:message name="check_serviceSoapOut">
         <wsdl:part name="parameters" element="tns:check_serviceResponse" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataSoapIn">
         <wsdl:part name="parameters" element="tns:get_puantaj_data" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataSoapOut">
         <wsdl:part name="parameters" element="tns:get_puantaj_dataResponse" />
       </wsdl:message>
       <wsdl:message name="check_serviceHttpGetIn" />
       <wsdl:message name="check_serviceHttpGetOut">
         <wsdl:part name="Body" element="tns:boolean" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataHttpGetIn">
         <wsdl:part name="personel_sicilno" type="s:string" />
         <wsdl:part name="yil" type="s:string" />
         <wsdl:part name="ay" type="s:string" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataHttpGetOut">
         <wsdl:part name="Body" element="tns:DataTable" />
       </wsdl:message>
       <wsdl:message name="check_serviceHttpPostIn" />
       <wsdl:message name="check_serviceHttpPostOut">
         <wsdl:part name="Body" element="tns:boolean" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataHttpPostIn">
         <wsdl:part name="personel_sicilno" type="s:string" />
         <wsdl:part name="yil" type="s:string" />
         <wsdl:part name="ay" type="s:string" />
       </wsdl:message>
       <wsdl:message name="get_puantaj_dataHttpPostOut">
         <wsdl:part name="Body" element="tns:DataTable" />
       </wsdl:message>
       <wsdl:portType name="Aktarim_ServiceSoap">
         <wsdl:operation name="check_service">
           <wsdl:input message="tns:check_serviceSoapIn" />
           <wsdl:output message="tns:check_serviceSoapOut" />
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <wsdl:input message="tns:get_puantaj_dataSoapIn" />
           <wsdl:output message="tns:get_puantaj_dataSoapOut" />
         </wsdl:operation>
       </wsdl:portType>
       <wsdl:portType name="Aktarim_ServiceHttpGet">
         <wsdl:operation name="check_service">
           <wsdl:input message="tns:check_serviceHttpGetIn" />
           <wsdl:output message="tns:check_serviceHttpGetOut" />
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <wsdl:input message="tns:get_puantaj_dataHttpGetIn" />
           <wsdl:output message="tns:get_puantaj_dataHttpGetOut" />
         </wsdl:operation>
       </wsdl:portType>
       <wsdl:portType name="Aktarim_ServiceHttpPost">
         <wsdl:operation name="check_service">
           <wsdl:input message="tns:check_serviceHttpPostIn" />
           <wsdl:output message="tns:check_serviceHttpPostOut" />
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <wsdl:input message="tns:get_puantaj_dataHttpPostIn" />
           <wsdl:output message="tns:get_puantaj_dataHttpPostOut" />
         </wsdl:operation>
       </wsdl:portType>
       <wsdl:binding name="Aktarim_ServiceSoap" type="tns:Aktarim_ServiceSoap">
         <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
         <wsdl:operation name="check_service">
           <soap:operation soapAction="http://tempuri.org/check_service" style="document" />
           <wsdl:input>
             <soap:body use="literal" />
           </wsdl:input>
           <wsdl:output>
             <soap:body use="literal" />
           </wsdl:output>
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <soap:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
           <wsdl:input>
             <soap:body use="literal" />
           </wsdl:input>
           <wsdl:output>
             <soap:body use="literal" />
           </wsdl:output>
         </wsdl:operation>
       </wsdl:binding>
       <wsdl:binding name="Aktarim_ServiceSoap12" type="tns:Aktarim_ServiceSoap">
         <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
         <wsdl:operation name="check_service">
           <soap12:operation soapAction="http://tempuri.org/check_service" style="document" />
           <wsdl:input>
             <soap12:body use="literal" />
           </wsdl:input>
           <wsdl:output>
             <soap12:body use="literal" />
           </wsdl:output>
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <soap12:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
           <wsdl:input>
             <soap12:body use="literal" />
           </wsdl:input>
           <wsdl:output>
             <soap12:body use="literal" />
           </wsdl:output>
         </wsdl:operation>
       </wsdl:binding>
       <wsdl:binding name="Aktarim_ServiceHttpGet" type="tns:Aktarim_ServiceHttpGet">
         <http:binding verb="GET" />
         <wsdl:operation name="check_service">
           <http:operation location="/check_service" />
           <wsdl:input>
             <http:urlEncoded />
           </wsdl:input>
           <wsdl:output>
             <mime:mimeXml part="Body" />
           </wsdl:output>
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <http:operation location="/get_puantaj_data" />
           <wsdl:input>
             <http:urlEncoded />
           </wsdl:input>
           <wsdl:output>
             <mime:mimeXml part="Body" />
           </wsdl:output>
         </wsdl:operation>
       </wsdl:binding>
       <wsdl:binding name="Aktarim_ServiceHttpPost" type="tns:Aktarim_ServiceHttpPost">
         <http:binding verb="POST" />
         <wsdl:operation name="check_service">
           <http:operation location="/check_service" />
           <wsdl:input>
             <mime:content type="application/x-www-form-urlencoded" />
           </wsdl:input>
           <wsdl:output>
             <mime:mimeXml part="Body" />
           </wsdl:output>
         </wsdl:operation>
         <wsdl:operation name="get_puantaj_data">
           <http:operation location="/get_puantaj_data" />
           <wsdl:input>
             <mime:content type="application/x-www-form-urlencoded" />
           </wsdl:input>
           <wsdl:output>
             <mime:mimeXml part="Body" />
           </wsdl:output>
         </wsdl:operation>
       </wsdl:binding>
       <wsdl:service name="Aktarim_Service">
         <wsdl:port name="Aktarim_ServiceSoap" binding="tns:Aktarim_ServiceSoap">
           <soap:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
         </wsdl:port>
         <wsdl:port name="Aktarim_ServiceSoap12" binding="tns:Aktarim_ServiceSoap12">
           <soap12:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
         </wsdl:port>
         <wsdl:port name="Aktarim_ServiceHttpGet" binding="tns:Aktarim_ServiceHttpGet">
           <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
         </wsdl:port>
         <wsdl:port name="Aktarim_ServiceHttpPost" binding="tns:Aktarim_ServiceHttpPost">
           <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
         </wsdl:port>
       </wsdl:service>
    </wsdl:definitions>

  • How do I remove the 'seam' after adjusting one part of my photo?

    I am new to PS, using CS6. In the attached picture ,I wanted to adjust the rear of the animal so that it wasn't so dark, she looked like she was disappearing into the dark, but my adjustment has left a 'seam' that I am struggling to fix. I looked up online how todo my initial adjustment that led to this problem,  and this is what I did:
    I used the lassoo and isolated her rear quarters. I created a new brightness/contrast adjustment layer, and pasted in her cut out rump in this layer. I adjusted the brightness to about where I want it, she's no longer disappearing into the dark.
    However as you can see, there's now a definite 'seam' line between her fur on her front end, and the rear end where I adjusted. I tried creating another adjustment layer to adjust again, but this didn't work. I've played around with different tools,some of which won't work on the adjustment layers (I'm new, that's how you learn these things) but I'm stuck - how do I make the lighting on her fur as it recedes look even again? Or, is the way I originally did it not the best way?
    I'd love some instruction on this, I have so many photos where I only want to adjust the lighting in one area, that I'm open for ideas...
    thanks heaps,
    cheers, Metta
    Metta

    Hi
    Quote:"What good was that supposed to do?"
    I thought this was a forum for newbies. If I knew it wasn't going to do any good, obviously, I wouldn't have tried it!   If the 'stupidity' of newbies tries your patience and has you rolling your eyes, then perhaps best not to let them annoy you with their stupid attempts, and hang out with those who are your equals. At least I am giving this a go. Many people are too scared to even go near PS. Or they give up the first time something goes wrong.  I try to solve my own problems first. I try to learn by creating challenges - such as wanting to adjust the background on my own picture that I want to use for my own purposes rather than having everything spoon-fed to me and being afraid to move  away from whatever a tutorial or book offers. Yes, I follow tutorials, but I also try and expand out from that by looking at my own pictures and what do I want to do with them, and then try and work out how to do it, even if I don't know everything yet. (And clearly I don't, as you were all too quick to remind me). I'm the kind of person who is not afraid to press a key to see what will happen. At least I am trying, and willing to learn.
    As I said in my OP, the reason I chose the course of action that I did was that I was following a tutorial that I found online that instructed me that that was the way to do it; that is, to adjust one part of a photo. And the instruction said to create a new layer with the part you want to adjust cut out, and then adjust it. That part worked. So in that regard, the tutorial instructed me correctly. What I wasn't bargaining on was the 'seam' where the fur transition is not smooth. As for using brushes as you suggested, I tried that, and also the healing tool, but when I tried to use them on that layer, PS advised me that I could not use them on it. I tried a few other things, including selecting the seam area and trying to adjust that (ok, go on, laugh) but that didn't work either, but when the tools weren't working, I was left stuck on what to try next. Clearly I've done something wrong, now please teach me how I may have approached it better.  I hope the screen shot is clear enough. Thank you.
    Metta

  • Message must have exactly one part

    hi,
    I have tryed to create a proxy in ECC 6.0 abap but it gives an error message:
    Proxy generation terminated: Message must have exactly one part
    Message no. SPRX046
    Background
    During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
    ==> Display Query
    ==> Display WSDL Document
    Diagnosis
    In a WSDL document, a <message> must contain exactly one <part>, therefore:
    <message name="ObtenerLicenciaRequest">
    <part .../>
    </message>
    In this case, a <message> has no <part> or multiple <part> entries. Proxy generation cannot process such messages.
    System Response
    Proxy generation is terminated.*
    can any one help me?
    The WSDL is:
    http://200.0.156.42/lme_pruebas/webservices/webservicesEmpleadores.php?wsdl
    Thanks

    Here is the fragment from your WSDL. You have more than one line with <part name...>:
    - <message name="ObtenerLicenciaRequest">
      <part name="rut_empleador" type="xsd:int" />
      <part name="dv_rut_empleador" type="xsd:string" />
      <part name="rut_usuario" type="xsd:int" />
      <part name="dv_rut_usuario" type="xsd:string" />
      <part name="password" type="xsd:string" />
      <part name="fecha_proceso" type="xsd:dateTime" />
      </message>
    According to the error message, you must have only one of those, e.g.:
    - <message name="ObtenerLicenciaRequest">
      <part name="rut_empleador" type="xsd:int" />
      </message>

  • In pages, how do you view two copies of a doc simultaneously, so you can read one part while working on another?

    Is there a way to view two copies of a doc simultaneously, so I can read one part
    while I am working on another part?

    @fruhulda,
    Peter,
    In Mountain Lion, you can choose a [.pages,.doc,.docx] document and request that it open directly in Preview via the Open with... menu. This includes Word 97/2000/XP .doc files. You cannot do this in Snow Leopard.
    The Quick Look functionality on Mountain Lion (also by that name on Snow Leopard), allows one to select one or more documents in the Finder, and display them with a tap from the spacebar. On Mountain Lion, it will display the previous file types, and offer to open them in the default application. On Mountain Lion, Quick Look also offers a Sharing panel for e-mail, messages, and AirDrop. The e-mail option makes a proper attachment in Apple Mail.
    The Snow Leopard version of Quick Look will also open an OpenOffice .odt file, even when that application is not installed. A feature improvement over the Snow Leopard version, the Mountain Lion Quick Look offers to open the displayed document in the default application that would ordinarily open it with a double-click. Therefore, on Mountain Lion, with OpenOffice installed (default for .doc/x files on my machine), Quick Look opens the .doc/x and .odt files and offers to open them in OpenOffice.
    Quick Look can open other file formats including .rtf, graphics, etc.
    Peter's reference to Cover Flow is an alternative Finder view of a filesystem hierarchy. The front-most, selected document viewed in the Finder Cover Flow view, can be opened via the Quick Look button on the Finder toolbar.

  • How to Activate at least one part of the Business Content of CO-PA

    Dear Experts,
                   Is ther any chance of Activating at least one part of the Business Content of CO-PA, like  Info Objects and key figures in the BI Content, berore replicating the CO-PA Data source?
    As the structure of the info cube should correspond to that of the related  operating concern, But BI
    donot support predefined Business content for any operating concern.
                Experts kindly sugest in this point of view. And also kindly provide live senario's with CO-PA
    Extraction.

    Hi
    If i got your question properly
    If you are talking about any operating concern BC Data sources , we dont have any BC Ds for COPA operating concern
    can use KEB0/2 to work on COPA
    COPA datasource enhancement
    Re: copa
    Edited by: Aduri on Dec 30, 2008 5:10 PM

  • I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

    I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

    I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
    - Restore from backup via iTunes. This will install a fresh copy of the iOS. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.          
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • I am trying to share a video scene of around 15minutes to youtube however it keep's timing itself out, I have even selected half of the scene in the hope that it will work in which it did for one part however now the rest won't share. Any suggestions?

    I am trying to share a video scene of around 15minutes to youtube however it keep's timing itself out, I have even selected half of the scene in the hope that it will work in which it did for one part however now the rest won't share. Any suggestions as I have been trying for a couple of days now?

    Run  Memtest86
    for starters...
    Also, give all numbers on the PSU..

  • Is it possible to clone one part of an image into another in iphoto?

    Since it is not possible in Aperture to clone one part of an image into another photo is it possible in iphoto?

    No.  You will need to use an image editor that can handle layers.
    Some Image Editors that support  layers:
    Photoshop Elements 9 for Mac - $79
    GraphicConverter - $45
    Rainbow Painter - $30
    Imagerie - $38
    Acorn - $50 Pixelmator - $60 
    Seashore - Free
    Portraits and Prints - Free
    GIMP for Mac - Free
    Of those I believe you get the most bang for the buck with PSE 9.  The following are some of the advanced editing you can do with it:
    Click to view full size
    Click to view full size
    Additional possible candidates for editors can be found by searching for "edit" at MacUpdate.com.
    OT

  • How to clone one part of an image into another

    Is it possible in Aperture to clone one part of an image into another or as in windows fuse the photos together?
    Thanks

    This points directly to the difference between a digital image conversion and development program, and a graphics program.
    Development programs' tools adjust the color and luminance information in each pixel.  They do not (mostly) add any information to the pixels or to the image.
    Graphics programs are built around adding information to images (or blank canvases).  Rectangles, circles, text, other images -- these are all graphics elements which are combined to make a new image.
    Aperture is the former (and also a superb digital asset manager).
    The generalized workflow is this:
    Capture information using a digital camera
    Optimize that information (make the picture as good as possible) using an image development program
    Combine pictures and graphics elements to make new graphics using a graphics program
    There are many excellent graphics programs.  Photoshop is the best known and most used.

Maybe you are looking for