Bus routing information?

how can I get my bus sends to be stereo while being pre-fader. I need to use these for my cue mixes but can't make them stereo. help?

I gues what I am trying to do is send a cue mix via the bus sends but want it to send my panning info also. I ultimately want pan control for the bus. does that make sense? thanks for your help guys!

Similar Messages

  • Does sge 2010 support Routing Information Protocol (RIP) ?

    Hi, I would like to know if the sge2010 switch support Routing Information Protocol (RIP) and if so how do I enable it. I have a small wireless router that support it and would like client connected on it te bo visible from the wan side and that worked when I had another device doing the routing with RIP support the wireless router was picking up that information and the routing for the wireless client was working.
    Thanks !

    thanks, thats a shame that a 80$ wireless router support that function and a 1000$+ switch doesn't

  • How can I eliminate all of the routing information when printing an e-mail?

    When printing an incoming e-mail, Thunderbird includes a full page or more of all of the routing information related to the e-mail. All I need is the content of the e-mail, indication of an attachment, and who it is from. There must be a way tell Thunderbird not to include all of this.

    From the Menu Bar select''' View-Headers-Normal'''
    No Menu Bar? Press the '''alt '''key.
    This will remove it from printed and forwarded messages.

  • Where to store shipment routing information

    We receive sales orders with shipment routing information included, such as 'Use UPS for under 150 lbs, use Alvan for over 150 lbs'.  Where in the sales order business object, should this information be stored?  Specifically, which table and field?
    Thanks,
    Nancy Walk
    [email protected]

    Hi,
    Assuming that a human being will review the Order in B1, I suggest that you use Comments property (column 'Comments' in table 'ORDR', that field is labeled 'Remarks' in B1 UI).
    HTH
    Juha

  • Mass Update for SMSY Server Routing Information

    Hello,
    We are on the Setup Service process and we got around 980 customer's servers conected to our productive solution manager trought trusted RFC's connections.
    The problem is that we have to change our router public IP on all this systems due to a ISP change, and with that change we have to change also our public IP which are connected all our customers.
    There is any standard way to mass update entris on SMSY->server->routing information ?
    Thanks:
    Luis Salvador

    Hi Lluis,
    If you just want to do a mass SMSY update, I'd suggest using a CATT script since you can avoid ABAP coding in that case.  However I fear that in addition to updating SMSY, you will also need to update all your RFC destinations (possibly the BACK destinations on the satellite systems too).  In this case you are stuck with ABAP coding!
    Jon

  • Get Routing Information

    Hello All,
      I need to select routing information based on Material and plant level. Is there any standard function module or BAPI available for this purpose ?
    Thanks,
    Shounak.

    Oh its char type!!
    I was assuming number type

  • TS3147 how do i locate the router information my computer is connected to?

    how do I locate the router information my computer is connected to?

    I don't know either since I have no idea what router you have. Why don't you just give them your current password?

  • V.7.2.1 Fixes Motu bus routing weirdness

    YAY! Well done apple, that was one of the points I made on the "Thing you'd like to see in the next version of logic" post on this forums not so long ago. So is it one fix per version? Should I just wait till 2045 and buy Logic Express 80, when all the bugs are worked out?
    Oh well, at least it's nice to not have to sit and plan your bus routing before starting a project! Thanks, I suppose.....

    Hi David,
    as you are in UK, I thought you like to know that Sound on sound mag editor Paul White has an e-mail add for those issues to report to apple.
    regards,
    Jorge
    http://www.soundonsound.com/

  • Need Route Information

    Hi Gurus,
    I got Requirement where i need to fetch data for Shipment Number, Date on Which it is created, Route, Product, Dep. Zone and Dest. Zone.
    I have gathered data for Shipment Number, Date on which it is created, Route from table VTTK(Shipment Header) but i am not able to fectch data for Dep. Zone and Dest. Zone..
    Could you please guide if ther any table in SAP which will provide Route Information present in the system.
    Thanks in Advance!
    Regards
    -Deven

    Hi,
    The departure zone and destination zone details will come from the shipment item stage level. Therefore you have
    check the VTTS table. If there are multiple stages then you will have different departure and destination zones.
    stages is based on the  route definition
    Regards,
    Ramana

  • Functional module to get routing information

    hi friends,
                    i need FM from where i can get information about routing(CA03) in a table

    Hi Sikindar
    thanks for your inputs it was closed
    One more input i need i want the function module for infotype 2010. In this function module RP_FILL_WAGE_TYPE  i could not able to find the pa2010 infotype.
    could any one let me know where i need to pick the infotype 2010
    Regards,
    Prasad

  • Can getvpn encrypt routing information in routing protocol?

    Hello everyone,
    We'er thinking of deploying a getvpn on a military network over a carrier vendor VPLS cloud. My concern is that can the route updates, hello packets, etc in EIGRP be encrypted so that the carrier can not see our network information? Thanks

    GETVPN is a policy based VPN, it will encrypt whatever you need it to encrypt. Whether that's desirable, that's another thing.
    As usual you can refer to GETVPN DIG
    http://www.cisco.com/c/dam/en/us/products/collateral/security/group-encrypted-transport-vpn/GETVPN_DIG_version_1_0_External.pdf
    Section 3.5.4 should be informative.

  • Cisco 7600 Series (7603) Router Information

    Hello,
    Does anyone have a link or reference to a good description of the Cisco 7600 boot process and various memory heirarchy functions? I'm looking for information on what should be in NVRAM, FLASH, SUP-BOOTFLASH etc. Thank you.

    You can find all the 7600 series router info here.
    http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet0900aecd801c5cab.html
    http://www.cisco.com/en/US/products/hw/routers/ps368/prod_literature.html
    HTH,
    Sundar

  • FM to read routing information

    Hi experts,
                              My requirement is to copy routing , for that I am using BAPI_ROUTING_CREATE. I need to read routing details and populate the BAPI tables for new routing creation. I searched in SCN and i cud find a few  FMs ,but all these FMs have status 'Not released'.
      1. Is there any released FMs available to read routing data?
      2. Is there any other way to copy routing /  Any workaround for this?
    PS: We are trying to replace a BDC on CA01 for routing copying.
    Thanks in advance
    Sanu

    Hi,
    Check these
    CP_DB_MAPL_READ
    CARO_ROUTING_READ
    CARO_ROUTING_REF_EXPLODE
    CARO_S_ROUTING_USED
    CCDC_ROUT_DATE_READ
    CCLI_ROUT_LIST
    CKBA_ROUTING_GET_LIST
    CK50_ROUTING_DISPLAY

  • Download routing Information

    How can I download the routing operations data?
    In my case there are thousands of opearations in the routing and it is difficult to copy paste page wise.
    Appreciate your assistance

    Hi,
    I suggest you to get the details at the table level and not with the frond end transaction.
    Get the Routings (groups) from MAPL table (Task list usage N for routing)
    Get Header data for the groups using PLKO
    & Operation level data using PLPO table.
    Rgds,
    Navin Keerthi.

  • Bus routing delay

    Ok, Please try stay with me as I try to explain...
    -Kick drum group in Ultrabeat outputs from UB ch17 > Aux 1 in Logic's mixer
    -Aux1 is sent to Bus1 as a pre-fader send.
    -Aux1 is now my kick drum channel fader.
    -Bus1 has no output, It will be used as a chain signal only
    -A synth patch has Noise gate insert with reduction reversed
    -Noise gate insert is sidechained to bus1.
    So we have a ducking synth, simple. The problem is the delay on the noise gate from the routing is pretty large. I can use lookahead on the noise gate but by the time i stop the track and play again the lookahead resets. Is this a bug? I realise in a real desk's routing I would introduce delay in the same way but is there a way around it in the digital domain?
    Thanks!!
    ooohh... Also, This kind of routing really stresses out a single core for some reason. is there a way to share the load??
    Thanks again !!

    oxtailz wrote:
    Ok, Please try stay with me as I try to explain...
    -Kick drum group in Ultrabeat outputs from UB ch17 > Aux 1 in Logic's mixer
    -Aux1 is sent to Bus1 as a pre-fader send.
    -Aux1 is now my kick drum channel fader.
    -Bus1 has no output, It will be used as a chain signal only
    -A synth patch has Noise gate insert with reduction reversed
    -Noise gate insert is sidechained to bus1.
    So we have a ducking synth, simple. The problem is the delay on the noise gate from the routing is pretty large. I can use lookahead on the noise gate but by the time i stop the track and play again the lookahead resets. Is this a bug? I realise in a real desk's routing I would introduce delay in the same way but is there a way around it in the digital domain?
    Are you talking about main SideChain function... routing the signal
    through noise Gate to use it as Key Input to open Synth sound in sync to triggering audio peak transient sound?
    This is the top class Live Mode function...
    *you must have PCD set to "ALL" to avoid delay*
    BUT... also the Noise Gate have delay itself... (no 0ms setting)
    On analog recording studio I use DBX KeepexII for achieve this result... but Keepex is very fast!!! No latency!!!. (I hope that Universal Audio will made a Keepex emulation plugin as soon)
    So the best way is to bounce as audio the track in SOLO! (and sync it by use Sample editor)
    This works fine on my old G5 too!!
    ooohh... Also, This kind of routing really stresses out a single core for some reason. is there a way to share the load??
    Obvious, you are using Live mode function = Live MODE function cannot use Multicore processing...
    ONLY ONE CORE of a single processor can be used... even if you have 2x processors
    The power is similar as my G5 2Ghz in that condictions...
    (This is why I chose the single Quad nehalem 2.66... in similar condiction there is hypertrheading that allow to use double power processing)
    Cheers

Maybe you are looking for

  • Itunes won't open or load

    please please could somebody help me, my itunes will not open at all. i have tried everything i can think of, uninstalling it then downloading the latest version, accessing it from shortcuts and start menu, but it just will not open. the busy cursor

  • How many itunes accounts are allowed per computer?

    Hi, I'm trying to figure out the best way to handle configuring all 80 of the iPads my business is purchasing.  I know there is a limit of 10 devices per iTunes account.  How many iTunes accounts are permitted per computer? I tried to just create 8 a

  • Reporting Services Installation Failing

    Hi Fellows, I am trying to install SCOM 2012 R2 reporting services on SCOM Management Server. SCOM Management Server also has a SQL Server 2012 SP1 (11.0.3000.0) SSRS and Database services installed. But SCOM reporting installation fails in between w

  • Can I create a portfolio slideshow using custom thumbnails?

    Hi. After searching the forums and watching several Lynda tutorials, I can't seem find an answer to my specific question. I'm creating a new portfolio website for myself and for the actual portfolio page, I went ahead and created custom thumbnails fo

  • Lotus Notes Application in Visual Studio

    Hi All, My company currently has a old VB application running in lotus notes. This imports a XML file, calls a stored procedure on a SQL DB tranforms the file, calls another stored procedure, then loads the file data into the SQL DB. We are now looki