Bus / Sends don't seem to be working...
hello,
i got a Logic project from a friend that im mixing and the bus / send isnt working. i'll assign it the send to a bus, pull up a reverb and it dose not work.
any thoughts?
thanks!
Luke.
with a bit more tinkering i was able to get the issue fixed.
i went into the environment window and it ended up being that the outputs of the buses were not assigned to the master out.
thanks guys!
Luke.
Similar Messages
-
Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?GUYS, I NEED HELP !
ANYONE? -
For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?
It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out. -
My old Apple ID was tied to an email address that I no longer have access to. My security question answers don't seem to work. Is there any other way to retrieve my password?
I have a new Apple ID - I would love to be able to merge them. Is that possible?You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(90031) -
Firefox is already running, but is not responding? Simple answers don't seem to be working
I started Firefox earlier today, and got a message about a Firefox issue and that it needed to be reset. Since the other option seemed worse than reseting, and Reseting Firefox seemed relatively painless, I clicked okay. A brief message popped up about successfully saving passwords, bookmarks, etc. Then a smaller window appeared, saying it was cleaning up Firefox. During that, the process seemed to freeze up. I closed it out, killed any firefox processes running, and tried to restart Firefox, when I got the "Firefox is already running, but not responding." message. There's a folder on my desktop labeled "Old Firefox data" which I assume came from the Firefox Reset (There's also now a copy of the profile on my desktop, just incase).
https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding
I found this and have been trying to work through it, but it doesn't seem to be helping.
1) Ther'es no Firefox.exe in my taskmanager, nor is there a plugin-container process.
2) I deleted the "parent.lock" file in both the profile (Which is just a bunch of jumbled letters and numbers with "default" in it), and the Old Firefox folder. However, these files were just "parent.lock" not "parent.lock.parentlock"
3) I didn't change the name on it, so unless the reset did before it locked up, I have no idea what to change it back to.
4) Its not a file share, so...
5) This might be a possibility. The Firefox folder that my profile is in is "Read Only" but I can't seem to change that. Everytime I go in, unselect "Read Only" and tell it to propagate the change through the subfolders, it seems to work, but when I check the properties 10 seconds later, "Read Only" is checked again.Sounds that the profiles.ini got corrupted when removing the old default profile and adding the new profile.
*http://kb.mozillazine.org/profiles.ini_file
You may have security software that was preventing Firefox from making changes to the file.
You will have to use the Profile Manager to either restore an existing profile or create a new profile.
A "Reset" creates a new default profile with a time stamp appended and tries to import some settings from the old profile leaving the old profile intact, including the (invalidated) cache folder (about:cache) that can take up to 1 GB.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox 15+ versions will move the old profile folder to an "Old Firefox Data-##" folder on the Desktop that gets a number appended if you use reset more than once, so you can no longer use the profile manager to revert to the old profile.
See also:
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Help and Mail search don't seem to be working properly in Mountain Lion.
When i search for a keyword in mail and specify 'Entire Message', I don't get any results. Also, the OS X help function is not giving me any results because it says that it can't connect to the internet. The internet is connected and working normally in all other applications.
Regarding Mail, the entire message search uses Spotlight to find results. Is your Spotlight icon (magnifying glass) in the dock still indexing, or otherwise corrupted?
You may wish to just add and then remove your main hard drive from the Spotlight privacy pane. This will cause Spotlight to re-index the whole drive, and once that's done (it may take a few hours) the searches would work.
I'm not sure on Help... Any chance you're behind some sort of proxy server? -
Firewall rules don't seem to be working correctly
i have my firewall turned on and have rules for itunes and jungle disk to all incoming, but itunes still alerts me to change firewall settings to allow sharing, which is an annoyance, but jungledisk will not work with me adding a rule, it seems as if i have to the firewall off completely for these to work. Also my screensharing will not work now either, but i have no problem with any other apps like skype where the rules work fine. Any suggestions?
Great news, thanks!
-
IPhoto keyword don't seem to be working
I've got some photos in iPhoto from vacations. They've got keywords of where they're from. If I type in "Myrtle" in spotlight, I get all of the pics from our trip to Myrtle Beach.
I recently took a trip to Cunningham falls State Park in Maryland. I imported all of the pics into iPhoto and keyworded them. But if I go to spotlight, and type in "Cunningham" none of the pics come up. I checked the spelling. I waited a few days wondering if it takes time for the computer to realize it needs to index these. I tried a couple of other keywords for some other recently entered photos and no dice.
This isn't a major issue, but still it should work! I can't say for sure if this started specifically when I updated to iLife 6 or not, because I can't remember precisely when I did that.
Anyway, is anyone else having this issue and does anyone have any suggestions on what may be causing it / how to fix it?
Thanks,
Dan P.Yes, a fair number of people have had the problem, but they all seem to hang out in the iPhoto forum!
Take a look at this discussion there:
http://discussions.apple.com/thread.jspa?messageID=1727966�
If you're lucky one of the easier solutions may work for you.
Francine
Francine
Schwieder -
I am using a Mac, and need to have my profile be on an external drive. I edit the profile.ini file per the instructions I found here:
https://support.mozilla.org/en-US/kb/profiles-tb
but it's not working. I must have the path wrong. Again, I am using a Mac. Here is the info in the profile.ini file:
[General]
StartWithLastProfile=1
[Profile0]
Name=default
IsRelative=0
Path=Macintosh%HD/My%20Passport/Thunderbird/Profiles/o6fqy09d.default
Default=1
Do you see anything about the path that looks incorrect? The "My Passport" is the external drive.
Also, if there was an updated disk image for Portable Thunderbird, I could try setting that up but all I can find is a very old one which I tried but it won't update.
Thank you,
ToddThe "My Passport" external drive must be mounted somewhere in the file system. That's the path you need to use.
-
Energy and Screen Savers Don't Seem to be Working
I have a 27" iMac (early 2011) running Lion. No matter how long I set the Energy or Screen Savers for, the screen dims after less than five minutes of inactivity then goes into screen-saver mode after another couple minutes.
Any suggestions?
Thanks,
LloydHi Lloyd,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
If that doesn't do it, (not on 10.7 to see if it's the same, but older OSX info)...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
(Then Trash the original of these last two, as "moving" them only copies them.)
Then reboot once more. -
My facebook and twitter app don't seem to be working..
they are small and centered and small plus they aren't responding. I have re-installed it several times but still it won'twork. I have no idea what to do please help
Hey melissadiiaazz,
Thanks for the question, and great troubleshooting so far. You have almost exhausted all of the recommended steps, as outlined in this resource:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Some steps you may have not already tried:
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
1. Open the App Store and tap Updates.
2. If updates are available, tap Update All.
3. If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Contact the developer
If you see the issue again, contact the developer of the app for help:
1. Find the app in the App Store.
2. Tap the app and tap Reviews.
3. Tap App Support.
Thanks,
Matt M. -
Even number bus sends to Aux objects don't work
This is a strange problem, but I am new to logic. I think I have the whole bus/aux thing figured out, thanks to many explanations. Any help on this behavior would be nice...
Here's my setup:
Pretty simple song - 12 tracks recorded live
3 stereo buses on bus 1-2, 3-4, 5-6 - used as groups for vox/drum/instrument submix - all work fine with some group compression, eq, etc. I set the individual channels to output to the buses. The bus outputs go to Out 1-2
One stereo Aux (1-2) - fed by bus 7-8 from the individual drum tracks - no input from bus send 8 (left side of the aux only working) - trying to do stereo parallel compression - don't really care if panning gets screwed up yet - but need to figure that out somehow.
5 Effects Aux channels
All are mono Aux with m->s effects, output to Out 1-2.
Aux 3 - Long delay (fed by bus 9) works fine
Aux 4 - Vox verb (fed by bus 10) - never gets an input
Aux 5 - Vox super short delay/chorus (fed by bus 11) works fine
Aux 6 - Instrument verb (fed by bus 12) - never gets an input
Aux 7 - Drum verb (fed by bus 13) - works fine
I have tried deleting all of the aux's in the environment and recreating them - still get the same behavior.
Any help would be appreciated. Thanks!
MBP Mac OS X (10.4.8) Logic 7.2.3
MBP Mac OS X (10.4.8) Logic 7.2.3 - MAudio FW1814It could be that you have Universal Track Mode disabled.
Under the Audio Menu, go to "Audio Hardware & Drivers", and make sure it's enabled.
See if that's it... -
I Recentl. Bought an iPhone and iMessage just doesn't seem to be working. It won't let me send a message to my friends with emails? Or iPods I don't know
Read these:
Using iMessage
http://support.apple.com/kb/HT3529
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?
Look here
Order product | Platform, language swap -
I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.
Is this work email account on a BES server?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Error message when doing SUBMIT
Hello there, i am just working on BSP pages that call ABAP Reports with "Submit" and display the Results within the BSP. My Problem now is that some reports may come up with an Error message (type 'E') that stops the report and the processing of the
-
Nokia lumia 925 thinks its charging
hi ive got a problem with my lumia 925 ive got the lates updates, but the phone often dont charge and it displays the charging symbol when ive removed it from the charger. what might be the problem?
-
HT2729 Need help on moving a movie
How do I movie back to the cloud after it has been downloaded on my Ipad?
-
We have a requirement that coverage for certain insurance plan should be based on number of dependents. Tried following options: (1) Enhance Feature - COVGR using "program option". This didl not work because PERNR or any other employee attribute whic
-
Hello! I have a problem scheduling my reports. I need YTD and other time comparisons, and use simple DECODE function like this one to achive this: SUM(DECODE(TO_CHAR(sales_date,'YYYY'),TO_CHAR(CURRENT_DATE,'YYYY'),sales_amount,0)) If I don't Schedule