Busco a "Marden Menezes" Tech Ed del a�o 2005

El otro d�a estaba navegando en Internet y
encontr� mi gemelo id�ntico que
al parecer se llama "Marden Menezes"
Lo encontr� en un archivo ppt al parecer de
alg�n seminario Tech Ed del a�o
2005. En la pagina 3 se encuentra la persona id�ntica
a mi que estoy
buscando
Si alguien por casualidad lo conoce, por favor env�ale
mis datos y poder
saludarlo.
Gracias
Cordialmente
Daniel Fernando Luna S�nchez
Anuack Technology de Colombia
Celular : 316 - 3341135
PBX (+57)(+7) 6819981- 6781918 Bucaramanga. Santander.
Colombia
Servicio al Cliente de 8:00 AM a 10:00 PM (GMT -05:00)
Registro de Dominios
Hosting (Hospedaje Web) Compartido O Dedicado
Administradores de Contenidos Web
Aplicaciones Web
Dise�o Web - Multimedia
Voz Sobre IP ( VoIP )
NO SPAM NOTIFICACI�N LEGAL Y CONFIDENCIAL
La Informaci�n contenida en este e-mail es
confidencial y solo puede ser
utilizada por el individuo o la compa��a a la
cual est� dirigido.
Si no es usted el destinatario autorizado, cualquier
retenci�n, difusi�n,
distribuci�n o copia de este mensaje est�
prohibida y es sancionada por la
ley
Si por error recibe este mensaje favor reenviar y borrar el
mensaje recibido
inmediatamente
NO SPAM LEGAL AND CONFIDENTIAL NOTIFICATION
The information on this e-mail is intended to be confidenti

Muchas gracias por el dato. Espero poder hablar con el.
Saludo
Cualquier inquietud no dude en comunicarse con nosotros.
Cordialmente
Daniel Fernando Luna S�nchez
Anuack Technology de Colombia
Celular : 316 - 3341135
PBX (+57)(+7) 6819981- 6781918 Bucaramanga. Santander.
Colombia
Servicio al Cliente de 8:00 AM a 10:00 PM (GMT -05:00)
Registro de Dominios
Hosting (Hospedaje Web) Compartido O Dedicado
Administradores de Contenidos Web
Aplicaciones Web
Dise�o Web - Multimedia
Voz Sobre IP ( VoIP )
NO SPAM NOTIFICACI�N LEGAL Y CONFIDENCIAL
La Informaci�n contenida en este e-mail es
confidencial y solo puede ser
utilizada por el individuo o la compa��a a la
cual est� dirigido.
Si no es usted el destinatario autorizado, cualquier
retenci�n, difusi�n,
distribuci�n o copia de este mensaje est�
prohibida y es sancionada por la
ley
Si por error recibe este mensaje favor reenviar y borrar el
mensaje recibido
inmediatamente
NO SPAM LEGAL AND CONFIDENTIAL NOTIFICATION
The information on this e-mail is intended to be confidenti
"d0s" <[email protected]> escribi� en el
mensaje
news:[email protected]...
> ask google
>
http://mardenmenezes.blogspot.com/
>
>
> "Anuack Luna" <[email protected]> escribi�
en el mensaje
> news:[email protected]...
> > El otro d�a estaba navegando en Internet y
encontr� mi gemelo id�ntico
que
> > al parecer se llama "Marden Menezes"
> >
> > Lo encontr� en un archivo ppt al parecer de
alg�n seminario Tech Ed del
> > a�o
> > 2005. En la pagina 3 se encuentra la persona
id�ntica a mi que estoy
> > buscando
> >
> > Si alguien por casualidad lo conoce, por favor
env�ale mis datos y poder
> > saludarlo.
> >
> > Gracias
> >
> > Cordialmente
> >
> >
> > ___________________________
> > Daniel Fernando Luna S�nchez
> > Anuack Technology de Colombia
> > Celular : 316 - 3341135
> > PBX (+57)(+7) 6819981- 6781918 Bucaramanga.
Santander. Colombia
> > Servicio al Cliente de 8:00 AM a 10:00 PM (GMT
-05:00)
> > Registro de Dominios
> > Hosting (Hospedaje Web) Compartido O Dedicado
> > Administradores de Contenidos Web
> > Aplicaciones Web
> > Dise�o Web - Multimedia
> > Voz Sobre IP ( VoIP )
> >
> > NO SPAM NOTIFICACI�N LEGAL Y CONFIDENCIAL
> > La Informaci�n contenida en este e-mail es
confidencial y solo puede ser
> > utilizada por el individuo o la
compa��a a la cual est� dirigido.
> > Si no es usted el destinatario autorizado,
cualquier retenci�n,
difusi�n,
> > distribuci�n o copia de este mensaje
est� prohibida y es sancionada por
la
> > ley
> > Si por error recibe este mensaje favor reenviar y
borrar el mensaje
> > recibido
> > inmediatamente
> >
> > NO SPAM LEGAL AND CONFIDENTIAL NOTIFICATION
> > The information on this e-mail is intended to be
confidenti
> >
> >
>
>
>

Similar Messages

Please. Email "Marden Menezes"

Marden Menezes
MCAD, MCSD, MVP C#INETA Brasil
Inove Inform�tica
Cualquier inquietud no dude en comunicarse con nosotros.
Cordialmente
Daniel Fernando Luna S�nchez
Anuack Technology de Colombia
Celular : 316 - 3341135
PBX (+57)(+7) 6819981- 6781918 Bucaramanga. Santander.
Colombia
Servicio al Cliente de 8:00 AM a 10:00 PM (GMT -05:00)
Registro de Dominios
Hosting (Hospedaje Web) Compartido O Dedicado
Administradores de Contenidos Web
Aplicaciones Web
Dise�o Web - Multimedia
Voz Sobre IP ( VoIP )
NO SPAM NOTIFICACI�N LEGAL Y CONFIDENCIAL
La Informaci�n contenida en este e-mail es
confidencial y solo puede ser
utilizada por el individuo o la compa��a a la
cual est� dirigido.
Si no es usted el destinatario autorizado, cualquier
retenci�n, difusi�n,
distribuci�n o copia de este mensaje est�
prohibida y es sancionada por la
ley
Si por error recibe este mensaje favor reenviar y borrar el
mensaje recibido
inmediatamente
NO SPAM LEGAL AND CONFIDENTIAL NOTIFICATION
The information on this e-mail is intended to be confidenti

Marden Menezes
MCAD, MCSD, MVP C#INETA Brasil
Inove Inform�tica
Cualquier inquietud no dude en comunicarse con nosotros.
Cordialmente
Daniel Fernando Luna S�nchez
Anuack Technology de Colombia
Celular : 316 - 3341135
PBX (+57)(+7) 6819981- 6781918 Bucaramanga. Santander.
Colombia
Servicio al Cliente de 8:00 AM a 10:00 PM (GMT -05:00)
Registro de Dominios
Hosting (Hospedaje Web) Compartido O Dedicado
Administradores de Contenidos Web
Aplicaciones Web
Dise�o Web - Multimedia
Voz Sobre IP ( VoIP )
NO SPAM NOTIFICACI�N LEGAL Y CONFIDENCIAL
La Informaci�n contenida en este e-mail es
confidencial y solo puede ser
utilizada por el individuo o la compa��a a la
cual est� dirigido.
Si no es usted el destinatario autorizado, cualquier
retenci�n, difusi�n,
distribuci�n o copia de este mensaje est�
prohibida y es sancionada por la
ley
Si por error recibe este mensaje favor reenviar y borrar el
mensaje recibido
inmediatamente
NO SPAM LEGAL AND CONFIDENTIAL NOTIFICATION
The information on this e-mail is intended to be confidenti

Installation with XP help

I am at a complete loss. I had to reinstall my comp which I am running XP. The javascripts are not working (I know you have heard this all before). I have tried to download Java VM, J2SE 1.4.1, J2SE 1.4.2 SDK. Nothing is working, it goes through the installation process. I get a desktop icon that shows java webstart and that is it. I have looked in all of the install info, gone through my control panel info.
Am I missing something or what? It is bad enough when I go to the downloads on the home page for java.sun.com and follow through to get the list of OS that I can choose from. Where it says (info) right beside the list I cannot get that to come up. Please can anyone tell my what I am doing wrong. I have also installed the sp for windows XP and Dell was completely useless to call.
I have reached a point of desperation.

As far as I know it istalled. I did take the previous replies advice and checked my security everything is enabled. The tech at dell was the one that told me to try this sight. I don't know if I am looking in the wrong place. Basically, if I am at a web page and it gives me an option to look at something else, that would come up on a new page nothing happens. Across the bottom of my screen it says something about javascript and that the extension. Here is a good example. My hotmail address, if I tell it to forward an email and want to view my contacts list to choose who to email to the contact list will not come up, nothing happens, no error, or addtional screen. I know this is in very layman terms but I do not know how to put it in technical terms to explain.

I installed the new version of Itunes and it created havoc

Yesterday I installed the new version of ITunes. This am I lost all of my audio. I did a system restore (on a PC using Windows) and it got rid of ITunes. I had to get a remote tech. from DELL to reinstall the audio, which is ok now. I uninstalled all versions of ITunes and re installed the older version but now I can not get the ITunes library into the newly installed older version. It tells me it dosn't recognize the program that created it. It does have both the older and new files I think. I don't want to have to reinstall all of my CD's. Can anyone Help. I hope so.
Dell PC Windows XP

Oh ok...try using a third party program such as YamiPod or CopyPod, both free and will let you rip your iPod onto your iTunes.
Or do it this way: http://docs.info.apple.com/article.html?artnum=300173
Sorry, I am getting tired and easily confused. Time to call it a night.
Good Luck,
Rachyl

Newest ver of yahoo mail - embedded images problem

FireFox 10.0.2: sending imbedded [copies] images in the body of yahoo mail message results in the receiver seeing "truncated message". This did not occur in the previous mail version and does not occur in IE ver 9. Standard procedures like clearing the Cache in mail did not solve the problem.

Thanks, for the very helpful information. I had talked with 4 different techies at Dell (all young men in India, of course) and could NOT get the answer!

Audigy SE: Snap, crackle, pop / hardware not fo

You think you have problems... take a look at mine... all CL relavent... I have a problem that Dell says they can't isolate, and sware they will make Creative's problem if our next course of action doesn't resolve the snap, crackles and pops in games (like Flight simulator 9 and 0, and WoW). Yes,?integrated MB?Sigmatel drivers (merge between CL and another company) and PCI SB cards have the same problems... Snap-crackle-pop and the continual "SCHHHHHH..." sounds. My system is a Dell, which of course, gives me a little support, but not much. Please read... With tech support through Dell from India and Canada, my system, w/o CL cards installed creates snap, crackles and popping sounds in any 3D engine game (like FS 9 and 0, and WoW). Dell has no idea how to solve this problem, after installing drivers for DX, doing and IDE config, reinstalling my onboard Sigmatel drivers, changing the hardware acceleration and sample rates, simply unplugging and plugging back in the input jack leading to the speakers, trying a CL's sound card, like the Audigy SE (with its own problems much like what my onboard integrated Sigmatel drivers do)...etc. Now, to all of you experiencing CL's problems, I have already tried updated drivers, moving the card from one PCI slot to another (through all PCI slots), adjusting volume levels, tried playing a DVD (couldn't hear anything well from the DVD beacuse the volume, though maxed out, wasn't loud enough), tried a SB 5. Dell Digital (same problems), and the list goes on. My system:?OS: Windows Media Center 2005Dell E50 3ghz P4 w/ ATI PCI hypermemory 256 video card(2) free PCI slots available after vidoe and TV out cardSigmatel integrated sound (not a 3D sound engine...they admitted that)2.5 gb DDR2 SDRAM, 400mhz?This isn't top of the line, but the next course of action from Dell is to wipe my system clean of WMC 2005 and install Windows XP Pro, at their cost, not mine (thank God for tech support extended warranty). At least then I will have CL driver's. After reading this post, however, and many on this forum, I find that CL's has not addressed the fundamental "problem". So, I wonder, after all is said and done, CL's hasn't really isolated the problem? What gives? It would appear the OS doesn't matter, so maybe the Chipset does? or is it the 3D sound engine? i am not a tech, and Dell tech support can't figure it out, either. So, any suggestions?

... and by the way, the cards won't even install with CL's software from the CD on to the system. The only way to get any of the cards to work, if at all, was to force the driver to work (going in and saying "I want THIS driver installed"). The software on the CD won't run (multiple cards...dell digital, Audigy SE, li've 5., etc) nor will the downloaded drivers EXE file run. When I forced the driver to work I got the "SCHHHH" sound, instead of the advertised "PERFECT UPGRADE FROM THE BASIC MOTHERBOARD AUDIO TO OUTSTANDING MUSIC, MOVIE AND GAME SOUND". In my case, the sound was no-more superior than a fart in space.

Need Help Configuring Audigy 2 ZS w/ Logitech Z-5500 Speaksers (Pre-bundled from De

I just received my Dell XPS Gen 5 system that I configured with the Audigy 2 ZS and Logitech Z-5500 speakers and as others before me, I can't get them configured to work together. My support tech at Dell is working on the issue, but I haven't heard from him yet. From reading the posts in this forum and others across the Internet, I am not alone in getting the sound card and speakers to work.
So far I purchased the digital coax cable along with the /8" mono-to-mono miniplug so that I can plug the coax cable into the back of the sound card's digital out connector/din.
The logitech control pod shows the input as Coax, but that there is no digital signal being sent to it. I also have no sound from the speakers.
I've read various ways to fix this issue, some of which talk about changing the sound card settings and dvd software settings (Catherina, the administrator for this forum posted some stuff); however, I don't know where to do this in my Creative software. One of the posts says to go to Start/Programs/Creative/Sound Blaster Audigy 2 ZS/Creative AudioHQ and click on the Device Controls icon and then select the Decoder tab and change the SPDIF settings or something. I don't have a Decoder tab as an option. I do notice on the Bit Accurate Mode tab that the section for S/PDIF input signal monitoring shows that the S/PDIF-In signal is an "Unknown or invalid signal."
Could someone please tell me specifically what I need to do and in what software (Creative, Logitech's, my DVD software) to get this set up? Again, all I've done is hooked up the Logitech control pod to the sound card's digital out via a digital coax cable. I haven't done anything else other than upgrade the Creative software.

I just received my Dell XPS Gen 5 system that I configured with the Audigy 2 ZS and Logitech Z-5500 speakers and as others before me, I can't get them configured to work together. My support tech at Dell is working on the issue, but I haven't heard from him yet. From reading the posts in this forum and others across the Internet, I am not alone in getting the sound card and speakers to work.
So far I purchased the digital coax cable along with the /8" mono-to-mono miniplug so that I can plug the coax cable into the back of the sound card's digital out connector/din.
The logitech control pod shows the input as Coax, but that there is no digital signal being sent to it. I also have no sound from the speakers.
I've read various ways to fix this issue, some of which talk about changing the sound card settings and dvd software settings (Catherina, the administrator for this forum posted some stuff); however, I don't know where to do this in my Creative software. One of the posts says to go to Start/Programs/Creative/Sound Blaster Audigy 2 ZS/Creative AudioHQ and click on the Device Controls icon and then select the Decoder tab and change the SPDIF settings or something. I don't have a Decoder tab as an option. I do notice on the Bit Accurate Mode tab that the section for S/PDIF input signal monitoring shows that the S/PDIF-In signal is an "Unknown or invalid signal."
Could someone please tell me specifically what I need to do and in what software (Creative, Logitech's, my DVD software) to get this set up? Again, all I've done is hooked up the Logitech control pod to the sound card's digital out via a digital coax cable. I haven't done anything else other than upgrade the Creative software.

Firefox is preventing some files from downloading off the internet

Today I had to go to the Dell website to update some drivers for my laptop. Every time I downloaded the driver file from the site to the download manager and then clicked on it to run, I would get a message that there was no file to download. The tech from Dell then had me download Google Chrome and the downloads went smoothly without a hitch. Something in Firefox is preventing the Dell files from downloading. I need instruction on how to correct this problem. I am also wondering why when I go to download files using firefox I do not get an option to run the file instead of save it. II only get the option to save it and then have to click on it from the download manager to run it. I would like to change this as well if possible
Thanks,
Maria

It is possible that you run into this maximum (the default value is 20):
* http://kb.mozillazine.org/dom.popup_maximum
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Can you advice to a configurations of a new desktop to work?

Hi friends
I´m not an expert in computer specifications (at true I have just an overall knowledgment about this) and I do not want to compare computer manufactured by specific companies (this is not the intention of this post).
We work with Dell computers since 2005. Now we are thinking about buying a new desktop computer for work. We are focused on social movies, like weedings, birtdays and so on. We record and edit in FullHD. We work with Premiere, After Effects, Encore (also other Adobe softwares like Photoshop, Illustrator, InDesign) and sometimes we do some work with 3Ds Max to make some animations.
Well, acessing the Dell´s website we perceived there´s two models of computers that has a similar price (but a considerable difference in configurations). The first is a New Dell XPS 8700 and the second is a workstation Dell Precision T3600.
New XPS 8700
> 4ª generation of the processor Intel® Core™ i7-4770 (3.4GHz up to 3.9GHz with Turbo Boost 2.0, 8 Threads, 8Mb Cache)
> Windows 8
> 16 GB (SDRAM DDR3, 1600 MHz)
> HD 2TB, SATA (7200 RPM) + INTEL® SRT 32Gb Solid State Drive
> Video board NVIDIA® GEFORCE® GTX 660 (1.5GB DDR5, 192-bit)
Workstation Dell Precision T3600
> Processor Intel® Xeon® Quad-Core E5-1603 (2.80 GHz, 10M Cache)
> Windows® 7 Professional 64-bit
> 4 GB (SDRAM DDR3, 1333 MHz)
> HD 250GB, 6.0Gb/s (7200 RPM)
> Video board nVidia® Quadro® 600 1GB
if you would choose from one of them, which one would you choose? Why?
With my poor expertise about computer specifications, I tend to choose the XPS, because of the bigger Ram memmory, the bigger HD...should I assume the video board and processor of XPS is worst than the Dell Precision??? this is why the price becomes similar?
Any advide?
Thank you a lot
Gustavo.

As configured, the XPS is much better.
The GeForce GTX 660 blows away the Quadro 600. The Quadro series, being more "pro" or better specced, is false marketing.
For either system, I suggest at least two drives: one for your OS/system, the other for your footage. (Check out Harm's guide here.) If your budget allows, using a SSD for your system drive would be beneficial (not sure the 32GB in the XPS would be large enough).
Also, the more RAM the better. The 16GB in the XPS should be sufficient...but I personally have 32GB and sometimes it's not enough.
Just curious...what format are you primarily shooting in? AVCHD, P2, etc?

CS3 ACR and Nikon Profiles

I recently installed CS3 on an older Dell workstation (ca 2005 or so) to enable the use of the Epson scanner on XP Sp3. I also want the user of that computer to access CS3 to at least learn fundamentals. CS3 shows 10.0.1, ACR 4.6.0.30. All I can see in Calibration is 3.6 and 4.6, not even Adobe Standard. I have not had this happen on previous installations on XP and I am stumped. This isn't a big problem, the scanner doesn't use them, but certainly, she should have access to those profiles.
There are two versions of View NX on that machine which she has been using but I have that on my own machine (Win 7) with no apparent interference.
So, what am I missing?
I should add that the Nikon cameras are D80 and D90, both supported by 4.6

While ACR 4.6 can (if I recall correctly) use DNG profiles, I don't think they were installed with ACR, I think they were (and are now) installed with the free DNG Converter. The current shipping version is 6.6 which should run in XP. Install that and you should then have the DNG profiles.

G5 Dual won't boot past Apple logo

PMG5 Dual 2.0gHz/2.5gb/23-inch ACD
Been using this m/c since late 2005 without problems. It's usually left on 24/7 (auto sleep, power save etc) except for a restart once a week.
This morning the machine was still showing the screen saver (had not slept overnight?), the fans were running at full speed and the red LED (SD8?) on the logic board was lit. Powered it down and restarted 10 minutes later without issues. Used it for maybe 30 minutes and went out for a couple of hours. Fans were running high, LED was on and screen was locked when I got back.
This time however it would not boot up after powering down. Starts as normal, chimes but only reaches the grey screen with the Apple logo and hangs. If it's left in that state the fans increase speed after a few minutes and, after an hour or so, the drive bay fan reaches the 'warning' speed and the red LED comes on.
Have been unable to boot ever since. Cannot boot from OS-X disk. Cannot boot in Safe Mode. Everything stops at the Apple logo.
Have done the following:
Reset SMC/PMU (Tech articles say that late 2005 G5s don't have PMU resets but the reset button behind the fan assembly is actually marked PMU Reset).
Switched out RAM
Reset PRAM
Checked all connectors.
(Note, the Air Deflector sensor is working correctly)
The only thing I can still do is to run AHT. It passed the Quick test and It's currently running the extended test but I expect it will pass that too (never had a machine that didn't pass AHT, even when it had a faulty logic board).
I suspect a major hardware failure but because I can't boot cannot try any software solutions first. Anybody have any ideas short of expensive repair/replacement?
Alan

This issue seems to be solved, with the assistance of a thread in the Tiger forum. I thought an update here might help others. To reiterate, the machine could not be booted past the Apple logo (no spinning gear wheel) either normally, or with the G5 install disks, or using the Option key startup, or safe mode.
Apple tech support felt that it was a hardware issue based on the description of the symptoms. In fact it seems to have been a software problem all along.
It was solved by:
Starting up using the original purchased Tiger OS-X 10.4 disks (when Tiger was first released). Although the disks that came with the G5 machine would not start up, the Tiger DVD did (with the C key held down) boot to the installer.
Instead of doing a re-install however I simply quit the installer and, from the dialogue box you get, selected the G5 as the startup disk. Clicked restart and, voila, the machine started up normally, and has been restarted half a dozen times since without issues.
There were no problems with the drive, and even repairing Disk Permissions was very minor, not much to repair.
Don't know why it worked with the Tiger disk (or if there is still some underlying hardware issue that will come back) but it did boot and everything seems fine.
Hope this might help somebody else.

MSSQL SYSTEM COPY

HELLO Techies,
Please, send the MSSQL 2005 SYSTEM COPY PROCEDURE with SCREENSHOTS asoon as possible
if possible within a hour.. please....
Thanks &Regards,
Pavan

Hi Pavan,
Please gothru SAP System Copy Document.
you should follow the official system copy guide
https://service.sap.com/instguidesNW70 (based on your version)
Here is the link which has procedure for SAP MS-SQL System Copy Procedure and System Copy differs from Environment . Try to get the procedure instead of screenshots.
http://joeysbasisblog.blogspot.com/2010/10/sap-system-copy-procedure.html
Also go thru below notes
Note 151603 - Copying an SQL Server database
Note 1476928 - System copy of SAP systems on Windows 2008 (R2): SQL Server
Regards,
Arjun

Garanzia

salve, vorrei sapere come funziona la garanzia in Italia dopo il primo anno. in particolare vorrei sapere se, in mancanza di scontrino decade. grazie

Novità? Nei "Termini e condizioni di vendita" dello Store Online c'è scritto quanto segue:
10.3 I vantaggi della garanzia limitata Apple si aggiungono ai diritti previsti dalla normativa a tutela del consumatore applicabile nel tuo paese. Ai sensi degli articoli 128–135 del Decreto Legislativo n. 206 del 6 settembre 2005 (“Codice del Consumo”), i consumatori italiani hanno fino a 26 mesi per denunciare al venditore un difetto del prodotto esistente al momento della consegna dello stesso. Si presume che i difetti che si manifestano nei primi 6 mesi dalla consegna del prodotto esistessero già al momento della consegna. Un consumatore che intenda fare valere la garanzia ai sensi del Codice del Consumo può rivolgersi ad un Centro di Assistenza Autorizzato Apple per accertare l’esistenza del difetto al momento della consegna.
Che tradotto in italiano credo intenda dire che sta a te dimostrare che il difetto esiste da quando ti hanno consegnato l'oggetto. Cioè io mi compro iPad, dopo una settimana scopro che ha un difetto, me lo tengo 20 mesi...e poi chiedo che mi venga sostituito!!! Mi sa che Apple ha trovato un cavillo nella nostra legislazione e lo fà valere.

Podcast error -61

I download several podcasts every day. Suddenly none of my subscribed podcasts will download - they all give me the same error message: "stopped (err = -61)" What's up with that? Can anyone give me a clue?

Howzit Colin,
Actually I was hoping that they didn't end up in my iTunes Library! Why? Because when it's time to use your library to shuffle some music for your party that you're throwing. The last thing you need is an old Amy Goodman's podcast of "Demoracy Now", coming on after you just listened to U2!!! Or if I was still single I could see how that could really be a problem. Imagine Colin, you been working on this one chick for weeks, you have her over to your place. You want to set the mood for the evening so you put on iTunes, a couple of great songs come on to get the evening rolling. Then, just when you get to make your move. All of the sudden you hear ," This is TWIT, 'this week in tech episode 24 Sept 21 2005, and I'm Leo Laporte". Great podcast, and I love Leo Laporte, and what they are doing there. But there is a time and a place for everything, and when you're getting ready to walk off into the sunset with Buxom betty. That is not the time for 'twit', if you know what I mean? That's basically why I don't need them in my library.
But are you saying, if the blue dot isn't next to podcast, then it has been deleted from the library?
There must be an easier way than deleting them one by one?

Podcast problem #61

seems all my podcast that I download end up in my iTunes Library. How do I stop my Mac from putting them in the library? Currently, I drag & drop each one individually in the trash!
Help please!!!!
mahalo,
Roger

Howzit Colin,
Actually I was hoping that they didn't end up in my iTunes Library! Why? Because when it's time to use your library to shuffle some music for your party that you're throwing. The last thing you need is an old Amy Goodman's podcast of "Demoracy Now", coming on after you just listened to U2!!! Or if I was still single I could see how that could really be a problem. Imagine Colin, you been working on this one chick for weeks, you have her over to your place. You want to set the mood for the evening so you put on iTunes, a couple of great songs come on to get the evening rolling. Then, just when you get to make your move. All of the sudden you hear ," This is TWIT, 'this week in tech episode 24 Sept 21 2005, and I'm Leo Laporte". Great podcast, and I love Leo Laporte, and what they are doing there. But there is a time and a place for everything, and when you're getting ready to walk off into the sunset with Buxom betty. That is not the time for 'twit', if you know what I mean? That's basically why I don't need them in my library.
But are you saying, if the blue dot isn't next to podcast, then it has been deleted from the library?
There must be an easier way than deleting them one by one?

Busco a "Marden Menezes" Tech Ed del a�o 2005

Similar Messages

Maybe you are looking for