Busienss Area in Documenty splitting

Hi All
I have document splitting concept with Profit centre, Segment, and Business Area. and required setting has been made as per the requirement. all three fields are mandatory and applied for zero balnce clearing account. after posting accounting document, in entry view i could able to see all three fields but while executing in General Ledger veiw i could not be able to see business area field apart from business area i can see profit centre and segement firelds with zero balance clearing account. i mean to say in BSEG table data is flowing but FAGLFLEXA table business area field is not flowing. wat could be the reason for that. is any setting missing?
Thanks and Advance
Sahil

HI,
check if the FIN_GSBER sceanrio is acitvated in the ledger definition.
best regards, Christian

Similar Messages

  • Vendor closing balances busienss area wise

    Dear Guru's
    Please suggest me,  i am executed this report S_ALR_87012082 vendor balance with local currency,  i  have given business area in dynemic selection,   here my problem is - if i am given business area or if i am not given business area also this report is showing same balances.   It should show less or more balance .  please suggest me from where can i get exact vendor closing balace busienss area wise.
    Regards
    Chandu

    HI Chandu,
    you given the Report S_ALR_87012082 there is no Business Area, only avaliable Vendor Master and Company Code in the Dynamic Selections,
    why can't  u use the FBL1N, In the FBL1N dynamic Selections you will get vendor Master, Company Code and Document
    In the Document you Select the Business Area filed then Double click the field than select equals to your Business Area.....
    May be all the Posting is Made only one Business Area, try two different business Areas....

  • Partner's Busienss Area

    Dear All,
    I need post manual document (transaction: FB01) with value partners/ business area in the balance items.
    In my document I use these items:
    - GL Account:   13000000 - Banks
    - GL Account:   20100000 - Loans recievables.
    I fill a value of partner's business area in the document.  But when I save this document, value for Partner,s Business Area is missing in the document.
    I use New G/L.
    The document is allowvalue for traning partner.
    Thank in advance for your help.
    Regards,
    anka

    Hi,
    PAth:
    Financial Accounting (New), choose Financial Accounting Global Settings (New) ® Ledgers ® Fields ® Display Scenarios for General Ledger Accounting.
    Active Scenarious (Partner's Busienss Area ) 
    Business area -  RBUSA
    Trading partner business area - SBUSA
    Regards,
    Viswa

  • Business area vs document split

    Dear All,
    Would like to know where i can get a comprehensive analysis between implementing functionality of business area vs document split.
    Our clinet want to know the pros & cons for the same.
    Thanks
    SMK Ganesh

    Hi,
    Please refer the ECC 6.0 functionality on document splitting to know the advantages of the document split concept.
    Kris.

  • There are still batch split items with quantity X for item

    Our current system is ECC6. The deletion of item in the delivery (TO
    confirmed) is different before ECC6 (4.6C). In 4.6, unless quantity of
    batch split items are zeroed out in the delivery, the item cannot be
    deleted. Message "There are still batch split items with quantity X for
    item" is encountered. In ECC, line item can be deleted even batch split
    items are not 0. The message doesn't exist in ECC6.
    Please advise how to activate this message.

    In ECC6, the logic has been completely changed during item deletion.
    Now, there is no way to activate the message VL224 when deleting batch item.
    In 46c,
    FORM XLIPS_LOESCHEN_PRUEFEN is called with XL_ERROR = 'X'.
    Main program     SAPFV50P
    Source code of   FV50PFLP_XLIPS_LOESCHEN_RC
    FORM XLIPS_LOESCHEN_RC
               IF IF_TABIX IS INITIAL.
                 REFRESH LT_REASONS.
                 PERFORM XLIPS_LOESCHEN_PRUEFEN TABLES   LT_REASONS      <<<<<<
                                                USING    LF_POSNR
                                                         CHARX        <<<<<<<
                                                         IF_ALL
                                                CHANGING LF_EXIT.
    In ECC6,
    The FORM is called with XL_ERROR = SPACE. That's why the error is not issued.
    Actually, they are called from different place in ECC and 46c. The logic has  been completely changed.
    Main Program     SAPMV50A
    Source code of   MV50AF0D        
    FORM DELETE_ITEMS_CHECK                                      
               perform xlips_loeschen_pruefen(sapfv50p) tables   ct_reasons   <<<<<
                                                        using    ls_admin-posnr
                                                                 space
                                                                 space   <<<<
                                                                 'GHK' "n_766525
                                                        changing lf_exit.

  • Kin TwoM- why are long messages split up?

    I just got the Kin TwoM, and I noticed that my longer texts are being sent as many separate texts...much like it used to be when an AT&T user would text you a long message. Is there some sort of setting or way around this? Last thing I need is irritating people by being THAT GUY who sends messages like that.

    My phone is only a couple of days old so I've been reading the manual and it states:
    Type message to open the text box and type your message. You can type up to 800 characters.
    My messages are also being split up when I know I am not doing a hard return and have nowhere near 800 characters.  I'm not sure what's going on here but I'd also like an answer.  I just checked the manual and it clearly states an 800 character allowance.  I wonder if it has something to do with the limitations of the receivers device?  Too bad I can't forward one of "those" broken messages to myself to see.  There is also no copy paste option that I can find so I can paste one in a new message to myself.  Any clues?
    I know I've sent messages to a Droid 2 with a 160 character limit so maybe it's not our device at all it just fragments it into the correct character limit for the receiver?

  • Emails are receiving as splitted attachments from mac to outlook

    emails are receiving as splitted attachments from mac to outlook.
    If i send to any of other outlook users, whole email body will split and receiving as attachment, like ATT00001.htm. but all other recipients thinks that it is empty email.
    If i remove any attachment from the same email, it will receive properly. the problem is happened only we attaching any documents with the email, it will split  the mail body into two three attacment and will attach with  original document.

    Send a test e-mail to yourself and see if it appears normal. The problem may be Outlook, not Mail. Once you send the e-mail, you have no control over how the received e-mail is displayed in another e-mail program.

  • Events are automatically being split

    When importing a set of photos, iphoto is splitting up my photos and placing my set into two events. To be clear, I want the chosen imported photos to go into one event, but iphoto is splitting them up. What am I doing wrong??
    Also, should I reunite the split photos into one event as I have seen that there are issues in moving photos in iphoto. Please advise, and many thanks in advance...
    Message was edited by: j sanchez

    If those photos are coming from a digital camera they will be split into multiple events as determined by what you choose in iPhoto's General preference pane.
    However, if the photos are in a folder and are imported from the Finder by dragging that folder into iPhoto's window they will all remain in the same event, regardless of what the time frame is set. The resulting event will also have the same title as the folder.

  • What are concequences of Split partition

    I am using 11.2.0.2 database.
    I got ORA-14074 error says that if you have a MAXVALUE already you will need to either drop the partition that encompasses the MAXVALUE or split partition.
    So I want to use split partition option through the below statement,
    alter table
    tablename
    split partition
    partmax at (XXX)
    into
    (partition partXXX, partition partmax);
    Please can somebody tell me the concequences of this statement.
    I am concerned about the existing data in the table will it by any change gets deleted, and what about indexes, do I have to rebuild, etc.
    I have to do this on produciton.
    I cannot test this as I don't have a test environment and moreover the table is having 70 million records and we don't have time/hardware resources to recreate this by export import in another database.
    Please advise on the bold above text.

    >
    Please can somebody tell me the concequences of this statement.
    I am concerned about the existing data in the table will it by any change gets deleted, and what about indexes, do I have to rebuild, etc.
    >
    No - no data will get deleted. As others have said there are options for keeping the indexes up-to-date or you can rebuild them.
    >
    I cannot test this as I don't have a test environment and moreover the table is having 70 million records and we don't have time/hardware resources to recreate this by export import in another database.
    >
    Total RUBBISH!
    That's the lamest excuse I have heard on the forums in a long time. You have several hours to post and thread and then wait to see if there is anyone you don't know and have never worked with that will respond but you don't have a couple of hours to do a simple test?
    Seventy million records is nothing and if you do the test on a PC using a version of Oracle that you can download for free.
    Anyone that doesn't test changes going into their production environment should NOT be working in this field: they should find a new line of work. That is incompetence at its worst.
    The SPLIT PARTTION test doesn't need a lot of data: just some data for each of the two resulting partitions. You can easily create a clone table using CTAS and then manually add the indexes.

  • Substitute business area after document splitting or when creating document

    Hi experts,
    I have to do a substitution of business area after document spliting, but i saw in previous threads that it's not allowed by SAP to modify a document after spliting. So if i do this substitution when I create a document, for example in f-02 or fb01,is it possible? And how can I do? With user-exit or Badi?
    I have a specific table which contains all business areas which I should put into the document:
    BUKRS, GSBER
    CompA, BA 1
    CompB, BA 2
    CompC, BA 3
    Thank you for giving me some ideas.

    If each Company code has a different business area, why do you need to populate it in the first place?
    The definition of a business area is that is can cover a range of Company Codes, but not be directly linked to one. I would suggest your use for Business Area is wrong.
    You are right about changes after splitting, however I would check with an ABAP'er on this or OSS.
    Also, if you are saying Business Area is Company code dependent, then there should not be a problem as the Business Area posted to will be correct, as an accounting document can only be for a single Company Code.
    You should have your business are validation, or substituion prior to document splitting.
    Hope this helps, award points if useful.

  • Business Area and Profit Center In Document Splitting

    Hi,
    We are using Business area and Profit Center characteristics for document splitting.
    In one transaction, the Business area and profit centers are defaulted through the cost center.
    The document is successfully split in respect of the business area, but the profit center is not filled, thereby giving error while posting.
    Please suggest.

    Hi,
    Actually, we have all three scenarios, profit center, segment and business area..
    As suggested, we have checked all field status relevant.. profit center is optional in all cases..
    Now, Pls consider the scenario without business area in document splitting characteristics..
    If I post an expense, profit center is picked thru cost center and segment thru profit ctr. The vendor or bank line item inherits the characteristic values from the previous line item.
    Now, in addition we have business areas in doc splitting characteristics.
    Business area, again is populated thru cost centers, along with profit ctr and segment.
    The business area gets correctly populated in the vendor line item.. but the profit center doesnt.
    Please let us know the reason..
    Edited by: Swapvik on Mar 23, 2009 4:07 PM

  • SC items are getting splitted into mutiple POs (Local PO)

    I have multiple items in the SC, when I approve the SC, it is creating one PO per SC item. Suppose if I have 3 items in SC, 3 local POs are getting generated. Infact I would like to see single PO with all 3 items.
    Any idea what should be the problem , Is it a configuration issue or code issue?
    Which FM/Badi should I debug to anlyze the issue?

    Hello,
    I guess this debug won't work, since you are approving the document. Split of local POs happens in SPLIT_PO_LOC_CMP_CRITERIA (class CL_BBP_SC_TRANSFER). The following parameters are checked:
    compare actual with previous item
      IF is_object1-guid_ven       <> is_object2-guid_ven       OR
         is_object1-guid_prpven    <> is_object2-guid_prpven    OR
         is_object1-proc_org_id    <> is_object2-proc_org_id    OR
         is_object1-proc_group_id  <> is_object2-proc_group_id  OR
         is_object1-pcnum          <> is_object2-pcnum          OR
         is_object1-pcins          <> is_object2-pcins          OR
         is_object1-subtype        <> is_object2-subtype        OR
         is_object1-be_co_code     <> is_object2-be_co_code        OR
         is_object1-ext_dem_logsys <> is_object2-ext_dem_logsys OR
         is_object1-doc_type       <> is_object2-doc_type       OR
         is_object1-logsys_fi      <> is_object2-logsys_fi.
    *...If there are differences set split flag
        ev_split = c_on.
      ENDIF.
    Please, try to do the following. Create a held shopping cart and take its GUID.
    Start FM BBP_PD_SC_TRANSFER (providing SC GUID) -> Go inside BBP_BS_SC_TRANSFER_CLASSIC -> DO -> TRANSFER -> DETERMINE_LOCAL_OBJECTS -> SPLIT_LOCAL_OBJECTS -> SPLIT_LOCAL_PO -> SPLIT_LOCAL_PO_DO -> SPLIT_PO_LOC_CMP_CRITERIA. Here the split will be done.
    I hope this helps.
    Regards
    Ricardo

  • Document splitting characteristic - functional area

    Dear collegues,
    I try to Define Document Splitting Characteristics for General Ledger Accounting - I need to do splitting by functional area, but although I assigned Scenario FIN_UKV - Cost of Sales Accounting, I do not see functional area as possible splitting characteristic.
    Have anyone faced such problem already?

    check
    specially for gl master data and other things in
    spro financial accouting global settings -ledgers-fields and try again
    regards

  • How to split document for business area

    hi,i am trying business,how to make document split working for business?for example,FI document has 2 DR PL account with different business area,how to split credit side BS account into those business accordingly?

    Hi,
    I think what you are looking for is to generate Business Area wise Balance Sheet. In Transaction code OB65, against the Company Code for which Business Area Balance Sheet is required - select the check box.
    Thanks
    Murali.

  • Split values in AuC to AiS per Area

    Hi guys,
    To attend the IFRS IFRIC 12, we must split the values in the two parts in the settlement of Asset under construction to Asset in service. This split occours only in the asset in service, when is AuC, i manage this values only in one area.
    For Example:
    The asset value is U$ 1.000,00.
    I need to transfer 100% of the amount in the area 1 and split this value in area 2 and area 3.
    Areas
    1 - Fiscal area          U$ 1.000,00     -     100%
    2 - Intangible area                          U$   700,00     -     70%
    3 - Financial area                          U$   300,00     -     30%
    How can I procede in this cases?
    Thanks,

    Hi
    To call up drilldown reports in AIS, choose AIS - Administration --> Preparatory Work (Business Audit) --> Customize Financial Information System --> Financial Statements/Trial Balance. Then choose between Financial Statement Key Figures and Export G/L Account Balances.
    Regards from Pakistan

Maybe you are looking for