Busineness content cube

hi experts,
how to install business content cube, for example SD 's customer cube,. steps before and after, since interviewer not satisfying on this answers, plz details

Hi
Hi,
1. Start the Administrator Workbench: Business Content(transaction RSOR) in the BW system.
2. If you have not yet created a logical system for the current client in this system, the system will display a message informing you of this. Proceed as recommended in this message:
a. Create a logical system for your local system and the current client by choosing the Create button.
b. Create the logical system on the overview screen of the Logical Systems view by choosing New Entries. Enter <SysID>clnt<client> as the name of the logical system in both columns, save your entries, and exit the screen by choosing (Back).
c. You are on the initial message screen again. As a next step, assign a client to the logical system by choosing the Assign button.
d. Create the assignment for the current client on the overview screen of the Clients view by double-clicking the entry for the corresponding client and entering <SysID>clnt<client> again in the Logical System input field on the detail screen for this view. Save your entries and leave the screen by choosing (Back).
e. The system displays a message asking if you also want to replicate the meta data. Confirm that you want to perform the replication.
3. Choose Grouping --> Only necessary objects.
4. In the navigation bar, choose the Packages area.
5. Expand the BW: Content CCMS System Management Data (RS_BCT_CCMS_CPH) subtree, and expand all subtrees of this package.
6. Select all objects of the above package. The easiest way to do this is to select the first object of the package in the list, scroll down, and then select the last object of the package while holding down the SHIFT key.
7. Drag the selected objects to the subarea on the right (Collected Objects).
You can ignore error messages saying that the root nodes of the subareas were not transferred.
8. Choose the button Install --> Install to perform the content installation.
9. If parts of the installed Business Content are already active, the system displays a separate screen informing you of this and asking whether you want to use the Active Version or the Content Version. You can overwrite the active version. To do this, select all checkboxes for Content Version and choose the Transfer Without Confirmation button.
if it useful please need to assingn some points
Thanks & regards
Madan Mohan

Similar Messages

Not able to add new fields in Content cube

Hi all
I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
Please write me the details or send me in my email at
[email protected] , I would be so happy for your help.
Thank you in Advance.
Sajita

Roberto;
I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
Sajita

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

LOS - Business content cube

Hi Guys,
When we are extracting data from LOS for ex, 2lis_12_vaitm, 2lis_12_scl or others. some times we are not using the SAP business content cubes. We are creating our own cubes by using the standard LOS.
Can some one please give a clear explnation of some examples which LOS DS and why we have gone for other then business content cube.
If you have any document please post here or send me to this mail [email protected]
Bye...
Sankar Reddy

hi
If we want more additional fields to be added to the cube, or the fields in the cube is no longer relevant for our analysis we decide for custom cubes
In that case, we modify the datasources and extract data to accomadate in cubes
Hope this helps
Assign points if useful
Regards
N Ganesh

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

Roles and queries Technical content cube

Dear Experts,
Is anyone aware of any technical content cube that has information about roles and which queries those roles have access to?
ie. I need Roles - Query mapping
I have already looked in to AGR_1251 table but here the direct value is not present. I will have to evaluate the S_RS_COMP and
S_RS_COMp1 authorization objects. Iam looking for another method. So please dont suggest AGR_1251 table.
Thanks,
Kris

Hi Kris,
The way that is there to find out the query - mapping details is already known to you which is the best possible way. But apart from that if you would like to know the roles present in your system then you can simply use the Metadata Repository that is already there and is easily accessible.
1) Just go to the RSA1-> Left hand side bottom -> Metadata Repository -> Click on it or use tcode RSORMDR.
2) You will get list for all the Activated objects in your production system.
3) Locate the Role object from Right hand side.
4) On clicking the Role you will get all the roles that have been created in your system.
If you want the role related to a query then you can simply select the Query object from the metadata repository, you will get list of all queries & further clicking on the query will give you entire details about the query like roles etc.
Also you can use your own method.
You will need to write your own abap to get the details by writing logic which compares the data from both the tables and displays the data accordingly else the best option that is always there is using Metadata Repository.
Thanks

Is it possible to delete data selectively from Business content cubes

Dear Experts,
         Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.

Hi Ramesh,
Follow below steps for selective deletion:
1.     Transaction code: Use the Transaction code DELETE_FACTS.
2.     Generate selective deletion program:
A report program will be generated of the given name, here .
3.     Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
     ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
     Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a.     Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100.      *number of weeks
lv_dte = sy-datum.     *system date
v_totaldays = lv_week * 7.      *total days
b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
    exporting
      i_date                      = lv_calday
      i_periv                     = lc_sales
    importing
      e_buper                     = lv_period
      e_gjahr                     = lv_year
    exceptions
      input_false                 = 1
      t009_notfound               = 2
      t009b_notfound              = 3.
if sy-subrc = 0.
    ls_time-calweek(4)      = lv_year.
    ls_time-calweek+4(2)    = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
          Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

How to see the bussiness content querys which are on bussness content CUBE?

Hi I need to find all the bussiness content queries which are there on Bussiness content Cube? Can any one tell me where to find or see them in bussiness content ?

hi,
find the possible bi content queries in the following bi content help documentation.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
through application wise. expcrmerp analyticssdqueries.
then go with bi content-object types-query elementsselect querythen double click the select objects--here you can find the possible queries for each infocubes.
hope this help you
regards
harikrishna N

Finding a Bus content cube ?

How would I find a standard business content cube which pulls in data from Mara, MBEW & BSEG to analyse purchase price variance?

Thanks. I am using this extractor. But their are some shortcomings. The first criteria is to comapare the std. cost against the invoiced or paid cost. Second scenario is if there is no invoice, then std. cost should be compared with goods receipt cost. Third is, if there is no goods receipt, then compare std. cost against the cost in the P.O.
So, I am using UM & BF extractors and for cost on the purchase oreders do I need to bring in the Purchase order extractor?
Thnaks for your help.

Urgent Help on Business Content Cubes!

Hi Experts,
Could any one help me on the below requirement please?
We need to provide an estimate to the customer about the below.
SAP PM/ Customer Service:
-Sales inquiry and sales contract (Including Billing Plan)
-Service Notifications and Orders (including Refurbishment)
-Graphical resource (Personnel/Contractor) allocation
-Timesheet and Resource Related Billing
-Service Order related Purchasing
-Planned/Cyclical Maintenance
We have to find whether there are any business Content Cubes available for the above?
Could any one have the idea which Business content cubes can be used for the above and give me some explanation pleaseeeeeee!
Waiting for your valuable inputs...
Many Thanks in advance..
Regards,
BH

Varma,
This is the URL for the BW 3.5 Business Content, you can check here:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Here's for BI 7.0:
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Good luck!
Luis

Busines content (WEBi Reports) in BOBJ

Hi Experts,
Do we have busines content (WEBi Reports) in BOBJ for HCM that interfaces with the BW content Standard Queries ?
Thanks,
Santosh

Sorry, No.
WebI is a free-form / ad-hoc reporting tool that does not deliver any 'out of the box' business content templates, nor organised by line of business.
yes, there are some demo samples, and some preconfigured Audit reports, but nothing pre-developed for business reporting requirements.
Regards,
H

Where can we find Business content Cubes,DSo,Reports for CS,PM,Treasury Man

Hi
Where can we find Business content Cubes,DSO,Reports for CS,PM,Treasury Management modules in help.sap.com. I searched in help.sap.com.But i haven't get exact link in the site. I haven't have access for the BI system.Can any list out the cubes ,DSO's,report that are in Business content for the above modules or give me the help.sap.com links, so that i can go through on it. It is for BI 7.O.
Does is there any differences in Business content objects for SAP BW 3.5 and SAP BI 7.0.
Thanks&regards
Revathi

You can find the businee contect in SAP Network Libraray
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
where you will find all the information.
Business content is no differnce between in 3,5 or 7.0..may add few more

Customer hierarchy without busines content?

Hi,
i already told you about my problem with the busines content.
I try to take on the customer hierarchy with the DataSource 0Cust_sales_Lkdh_Hier. When i define that datasource in the InfoObject 0Customer i get the message "InfoObject 0Cust_Sales not existent in version A" and then the transaction aborts.
When I try to take on 0cust_sales from the business content, i get a dump.
So could you please give me advice how I can manage the problem by own objects? Or other solutions/ideas?
I wish you a nice weekend, see you monday
Tobias

Hello Sarah,
Can you let me know how you are changing in VDH2N and second thing is the user has access of VDH1N?
Thanks,
Suman

Is it possible to create a copy cube from business content cube

Dear Experts,
I have to create the new cubes which is a copy of Business content statistics cubes .
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

Busineness content cube

Similar Messages

Maybe you are looking for