Busines Partner in table BUT000

Hi SAP gurus.
When I'm running transaction FWZZ, when I try to insert the bussines partner number, the system returns an error that the bussines partner it's not updated in table BUT000.
This only happens to the new Bussines Partners created by BPC1.
Is there any way to feed the table BUT000 automaticaly when crearting the BP via BPC1?
Thanks in advance.
Cheers

Hello,
You are using an incorrect transaction to create the Business Partner.
Please use transaction BP to create it and let me know your results.
Best regards,
O. Diaz

Similar Messages

  • BAPI to Update Title of Business Partner ( Table BUT000 )

    Hi
    Which BAPI can be used to Update the TITLE field of Business Partner ( Table BUT000 ) ?
    Warm Regards
    Moderator message - this forum is not meant to replace research that can be EASILY done by the OP.  Please read the Research Resources and Rules of Engagement sticky for links.
    Edited by: William Eastman on Nov 16, 2009 2:59 PM

    BAPI_ISUPARTNER_CHANGE
    Use this bapi
    pass corresponding X in PARTNERDATAX along with PARTNERDATA
    Regards,
    Prajakta

  • SAP Vendor Number and MDG Business Partner mapping table name

    Hello Expert,
    We are using MDG for Materials and Suppliers, while using we found some times error on vendore number and business partner mis-matching.
    Could you please tell me which table I should check where I can see ECC vendor number with MDG business partner number.
    It will help us to validate the wrong mis-matched one to correct in one go.
    Regards,
    Vijay Mittal

    Hello Vijay,
    You can find the Vendors in table LFA1. Your Business Partners are in table BUT000.
    The number ranges transactions are as follows: Vendors - XKN1, Business Parners - BUCF
    You should check the NR Status and make sure your value is greater than the last created LFA1 record, so your PPO does not fail (that's in case you're going the direction BP -> Vendor and don't have the "Same flag" active in view V_TBC001). If you are trying to synch up from Vendor to BP, you'll have to check the view CVIV_VEND_TO_BP1 instead.
    Hope that helps,
    Boris

  • Busines Partner links to Organizational Data question

    i can find the Business partner data in BUT000
    what DB table stores the values of links between Business partner and Org. unit
    or what GUID links need to be made to get this data???
    basically i am looking for sold to partys and ship to party and their respective organizational units...

    Hello,
    Use table HRP1001
    Take the business partner with leading Zeros & put in "ID rel.object" (Technical name SOBID ) then execute the table.
    Find the Org unit corresponding to "Object ID" (Technical name OBJID)
    Check this Org unit & BP combination in PPOSA_CRM it should match.
    If you know the Org Units then use the same table HRP1001 & put Org unit in OBJID & get the corresponding BP in SOBID
    Regards,
    Rajendra Sonawane

  • How to get busines partner number from organization id ?

    Hello,
    I'm working into SRM 4.0.
    I would like to determine the business partner number of an organization for which I know the organization id ('O' + number).
    Do you know a way / function module to achieve it ?
    Thank you very much for your support.
    Regards.
    Fabrice

    Hi,
         You can enter the name of the org in "NAME ORG2" field of table BUT000 to get the BP id in the field "PARTNER".
    BR,
    Disha.
    Pls reward points for useful answers.

  • Partner Function table for vendors in R/3.

    Hi,
    Can any one please let me know what is the
    Partner Function table for vendors in R/3.
    Thanks.

    Hi,
    Check the table WYT3
    Thanks,
    Naren

  • Partner profile tables.

    Hi,
    We need to add new vendors to the partner profile tables. The user has given us the vendor number, agent code and company code.
    Which are the tables we need to update?
    Thanks in advance.
    Mick

    Hi,
    For your information, the data are stored in the following tables -
    KNVK - Customer Master Contact Partner  
    KNVP - Customer Master Partner Functions
    Hope this helps!

  • Table BUT000 error in DDIC - Check table with SE14

    Hi Experts,
    When I import the sap_all profile to a new SAP BI 7 installation, i get the message
    Table BUT000 error in DDIC - Check table with SE14
    Is it a serious problem or I can continue using this BI platform?
    Regards
    Obayd

    HI,
    This is some wat not that much a general problem any way Have a look at the SAP Note 1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1 and
    SAP Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade.
    thanks,
    karthik

  • Updating Custom field in Table BUT000 using BAPI 'BAPI_ISUPARTNER_CHANGE'.

    Hi,
    I have added a new custom field in table BUT000. Now i want to update that field with 'X' and i have used EXTENSIONIN parameter in the BAPI 'BAPI_ISUPARTNER_CHANGE'. i have populated the field name(Custom field name) and value 'X' to that structure and passed to BAPI. But that field value was not getting updated. So can any one help me how to resolve this issue.
    Thanks,
    Sushma

    Hi Ravi,
    Thanks for your response.
    I have passed the Structure name  in parameter EXTENSIONIN, but still i am facing the same problem.
    Thanks,
    Sushma

  • Define type of partner number - Table TVPA

    Hi,
    Do you know if it's possible to manage a new entry in table TVPA in order to add a new type of partner number please ?
    I want to add a partner type like a purchasing group (EKGRP).
    Thanks for your help.
    Alex

    You can't make any entry in this table as the delivery class reads S-System table, maint. only by SAP, change = modification.
    Regards,

  • Tables BUT000 and SMOKNA1 not in synch

    Dear all,
    We are checking our customer database cause our users have complaint they are missing customers on their mobile clients.
    When I check BUT000 and SMOKNA1 I have noticed that some customers only exist in BUT000 and not in SMOKNA1, although the biggest part of my customers exist in both tables.
    The customers are coming from the R/3 system, but I don't see any difference in data between customers who are in SMOKNA1 and customers who are not.
    Can someone help me and tell me what is going wrong and how I can fix this problem so both tables are back in synch.
    Kind regards
    An

    Hi An,
    check out transaction Sdima, it was developed specifically for the purpose of comparing database entries (between CRM & CDB and between CRM & R/3).
    There should be a SAPtutor available somewhere on how to use the transaction.
    grtz,
    Michael.

  • Transaction IB51 / IB52 / IB53 Partner Assignment Table

    Hi CRM Gurus,
    Good day.
    Can you kindly provide the SAP Standard Table wherein the Partners for IBASE are being saved?  Thank you very much!
    Best regards.
    Brando

    Hi CRM Gurus,
    Good day.
    I performed an SQL Trace and found out that Partners are stored at this table: CRMD_PARTNER.
    However, it seems that the information that I need --- Address of the partner -
    is not there.
    Can you kindly provide the SAP Standard Table wherein the Address of Partners for IBASE are being saved?
    Thank you very much in advance.
    Best regards.
    Brando

  • Partner Profile Table

    Does anyone know what table(s) contain the partner profile info. F1 and technical info on the WE20 partner number field points to a view that appears to be incorrect.
    Thanks Nic

    hi nic,
    check in the table EDPP1.. for part no
    check in the table TEDST...for partner type
    regards,
    venkat.
    Edited by: venkat  appikonda on Mar 18, 2008 8:55 PM

  • Linking table CRMD_MKTLIST_ORG to table BUT000...

    We have a Z field (Industry) entered in table CRMD_MKTLIST_ORG which is displayed in the Account Heading. One of the data extracts requires to retrieve this information but I've been finding it hard to link the account from BUT000 to this table for the extract.
    I was wondering if anyone had linked to this table in this way?.
    Jason.

    Hi,
    CRMD_MKTLIST_I-LIST_GUID = CRMD_MKTLIST_ORG->ORG_REF_LIST
    Get CRMD_MKTLIST_I-BP_GUID_ORG go to BUT000-PARTNER_GUID.
    Best regards,
    Caíque Escaler

  • Partner roles / Table WYT3

    Hello together,
    I got a problem.
    At the moment I prepare a data migration for supplier master data.
    I also create the view for partner roles, database table WYT3.
    Everything works fine.
    The problem is:
    I create vendor master using LSMW or XK03.
    Then I check the created master data. I see everything, but no the partner roles.
    Only if I change from XK03 to XK02 I can see them.
    Do you know if there is a bug in ECC 6.0 or what has to be changed to see them.
    Thanks in advance

    The partner roles are customized.
    If you create vendor master - the defautl customizid value will be created.
    So - yes I see that partner roles which will be created, but they dont get any value from me.
    And how I said before - partner role have been created, but you can only see them when you are in changing mode or when you play the folder in SM35 in visible mode...

Maybe you are looking for

  • Report on a user.

    I don't know if this is the correct place for this. This is a report on the user [Mod Edit: Edited post to comply with the Skype Community Guidelines and Skype Etiquette] I do not know this person. I have never seen this person on the internet or in

  • InDesign CS2 - Can't print with Page Information Selected..

    I am unable to print in InDesign CS2 with the "Page Information" turned on in the "Marks and Bleed" section of the print dialog window. InDesign will do what it normally does when it prints. It goes through each of it's stages and the file reaches th

  • Geforce 8800 just for Windows

    I use my Mac for video work, but I'm also an avid PC gamer. Since the Mac has excellent hardware, except for the latest Direct X 10 video cards, I was wondering if I could install a Geforce 8800 card in an additional PCI-X slot. I'm fine with using m

  • How well  does SAP cope with a manufacturing environment ....?

    Hi all, I wanted to check about how well SAP copes with a manufacturing environment where there are many parts for many product lines, with small production quantities being the norm. In this case, you would see many BOMs, High quantity of POs, Suppl

  • Why  Itune7 tied up with MaxOsX ( 10.5.8) while using with Iphone5

    I have a macbook 10.5.8 which has Itune 10.6.3. It perfectly works with Iphone4. I upgraded to Iphone5 and It does not work with Itune 10.6.3 and asking for Itune 10.7. Itune 10.7 needs your mac OsX to upgrade. Why should I upgrade my OS for Itune 10