Business Address Service - Warning instead of error
Hello together,
i start to work with the Business Address Service. It's a smart tool and easy to handle but i'm a little confused about the error-handling. If i create a business partner and enter a RIGHT postal code i'm getting an error. But if a change this bp and enter a WRONG postel code i'm getting only a warning and the bp will be saved.
I searched in the SAP documentation and found the following information
"If a value is not contained in the corresponding check table, this is regarded as an error and the address is rejected.
To avoid incorrect entries, you can use the F4 Help for the relevant fields."
That's not true in our system. Are there any parameters i have to maintain?
Best regards
Sascha
I'm so sorry you're having issues submitting an email- how very frusterating! Let me check into some alternatives for you.
Either I or one of my colleagues will be back with suggestions soon.
Thanks,
Heather
Similar Messages
-
Business Address Services (BAS) and Where-Used ADRV/ADRVP
Can someone point out any good sources of information on Business Address Services or possibly its predecessors either online or hard-print? I've been through the help.sap.com information for BAS and all sorts of SAPNotes without finding what I'm looking for.
In particular I'm trying to understand default SAP's usage of the Where-Used links in BAS that are stored in the tables ADRV and ADRVP.
My Issue: If I create a Sales Document in SAP referencing a partner address stored in BAS there is no Where-Used ADRV record created. So I cannot use the address number of the ADRC record to find which documents are referencing it via ADRV.
steps to recreate:
- Using existing Customer/Partners
- Create Sales Document (Order) adding partners by selecting partner #'s and not manually overriding any address information.
- Address of the partner is now linked in the Sales Document via VBPA-ADRDA=D and the ADDRNUMBER references the same ADRC address records that KNA1 points to.
- There is no Where-Used record created in ADRV indicating that the Sales Document is linked to that address.
- If I change or delete the ADRC record from KNA1 then I do not have the information available to take any special actions on linked Sales Documents.
Note: If you manually override the address or use a one-time address when entering the Sales Document then the new address is linked via VBPA-ADRDA=E and a Where-Used record is created in ADRV. Also any follow-on documents created with reference to the Sales Document will also have Where-Used records created in ADRV. So in the case of changed or manually entered addresses ADRV does work as I would expect it to.
I am observing this behavior in both R/3 4.6c and ECC 5.0. Trying to understand why SAP is using or not using ADRV in these situations and whether the behavior can and should be changed.Can someone point out any good sources of information on Business Address Services or possibly its predecessors either online or hard-print? I've been through the help.sap.com information for BAS and all sorts of SAPNotes without finding what I'm looking for.
In particular I'm trying to understand default SAP's usage of the Where-Used links in BAS that are stored in the tables ADRV and ADRVP.
My Issue: If I create a Sales Document in SAP referencing a partner address stored in BAS there is no Where-Used ADRV record created. So I cannot use the address number of the ADRC record to find which documents are referencing it via ADRV.
steps to recreate:
- Using existing Customer/Partners
- Create Sales Document (Order) adding partners by selecting partner #'s and not manually overriding any address information.
- Address of the partner is now linked in the Sales Document via VBPA-ADRDA=D and the ADDRNUMBER references the same ADRC address records that KNA1 points to.
- There is no Where-Used record created in ADRV indicating that the Sales Document is linked to that address.
- If I change or delete the ADRC record from KNA1 then I do not have the information available to take any special actions on linked Sales Documents.
Note: If you manually override the address or use a one-time address when entering the Sales Document then the new address is linked via VBPA-ADRDA=E and a Where-Used record is created in ADRV. Also any follow-on documents created with reference to the Sales Document will also have Where-Used records created in ADRV. So in the case of changed or manually entered addresses ADRV does work as I would expect it to.
I am observing this behavior in both R/3 4.6c and ECC 5.0. Trying to understand why SAP is using or not using ADRV in these situations and whether the behavior can and should be changed. -
Busness Address Services in ESS
I want to know if Business Address Services are delivered for SAP ESS. I want to do postal code validation for Switzerland using Business Address Services. While it works like a charm in the SAP GUI. I am just not able to get it to work for ESS. I placed the function module ADDR_REGIONAL_DATA_CHECK in the specific_computations method of the infotype 0006 check class for Switzerland, but it throws some weird validations errors. I debugged the webdynpro but it does not seem to work. Any help will be appreciated.
Thanks
RajatPlease check class CL_HRPA_INFOTYPE_0006* this should help
-
Warning message instead of error message during PO creation in QM in procurement
Hi,
I activated QM procurement for a material and put a control key with delivery release, certificate required and invoice block....Now for that material, vendor and plant combination created QM info record and put some release qty...Now after the release qty is reached then when I am making next Purchase Order system is throwing warning message instead of error message and allowing me to create PO...where I need to convert the warning message to error message...
Thanks
KumarHello Kumar,
Never tested this ;
Anyways, Set Message control for lock as "Defects" for respective Control key.
Path: QCC0>QM in Logistics>QM in Procurement>Define Control Keys.
Amol. -
I am getting an error - java.lang.NullPointerException - when I go to Business Logic Services. Any ideas.
What version of xMII and what version of the client Sun JRE?
Also make sure you have the Java Web Start preferences set to not use a Proxy on the General tab.
Regards,
Jeremy -
USMT restore from Windows XP sp3 x86 to Vista x86 service pack 1 - USMT error code 36
Hi
We have been unable to restore user profile from Windows XP sp3 x86 to Vista x86 service pack 1 using USMT .
we keep receiving errors, see log below.
We have taken the backup from the windows xp several times, and Googled high and low for an answer - cannot get it to work.
We have used this sane command method on several windows xp to windows 7 migrations , without any issues.
please help
2014-06-11 14:50:18, Info [0x000000] LOADSTATE.EXE Version 6.2.9200.16384[gle=0x000000b7]
2014-06-11 14:50:18, Info [0x000000] USMT Started at 2014/06/11:14:50:18.626
2014-06-11 14:50:18, Info [0x000000] Command line: loadstate
\\backup\Profiles\Migration\Paul G /i:\\backup\Profiles\Migration\Paul G\migapp.xml /i:\\backup\Profiles\Migration\Paul G\miguser.xml /ue:*\* /ui:UNSWORTH\paulg /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log
/l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log
2014-06-11 14:50:18, Error [0x000000] Only Windows 7 and Windows 8 are supported as destinations.[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Unsupported OS Version: 6.0.6001.Service Pack 1[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Failed.[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] USMT Completed at 2014/06/11:14:50:18.628[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] * USMT error code 36: [gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] | Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]We are using
USMTGUI 5.0.3, which I understand uses latest version of windows USMT ( 6.3) .
When I try using USMT 6.2 from AIKTOOLS to restore the profile using this command , i get a different error. I have even tried adding /hardlink /nocompress and restoring profile from portable hard drive instead of NAS, and getting a different
error;
2014-06-12 11:53:21, Info [0x000000] USMT Started at 2014/06/12:11:53:21.897
2014-06-12 11:53:21, Info [0x000000] Command line: loadstate E:\conference-pc /i:E:\conference-pc\migapp.xml /i:E:\conference-pc\miguser.xml /ue:*\* /ui:UNSWORTH\administrator /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log /l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log /hardlink /nocompress
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\migapp.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\miguser.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Starting the migration process[gle=0x000000cb]
2014-06-12 11:53:22, Warning [0x080462] CListSysFileFilter::BuildTree: could not create FileList object for Z:\SFLISTLH.DAT: Win32Exception: \\?\Z:\SFLISTLH.DAT: The system cannot find the file specified. [0x00000002] __thiscall UnBCL::FileStream::FileStream(const class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long)
2014-06-12 11:53:24, Info [0x000000] System information:
Computer name: WIN-4Q9K3THYGWW
Machine SID: S-1-5-21-1202719645-4168933617-2382629769
OS version: 6.0.6002.Service Pack 2
Language: en-US
Architecture: 32-bit
Drives:
C: Type: Fixed, Bus type: ATA, Hotplug: No
D: Type: CD/DVD
E: Type: Fixed, Bus type: USB, Hotplug: Yes
Z: Type: Remote
F: Type: CD/DVD
Users:
WIN-4Q9K3THYGWW\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
UNSWORTH\administrator, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
WIN-4Q9K3THYGWW\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-06-12 11:53:24, Info [0x000000] Processing the settings store
2014-06-12 11:53:24, Error [0x080000] HARDLINK: cannot find distributed store for c - 14f873cb-57a5-48c7-90d9-5d001c5625b6[gle=0x00000002]
2014-06-12 11:53:24, Error [0x0802e3] SelectTransport: OpenDevice failed with Exception: Win32Exception: HARDLINK: cannot find all distributed stores.: There are no more files. [0x00000012] void __thiscall Mig::CMediaManager::SelectTransportInternal(int,unsigned int,struct Mig::IDeviceInitializationData *,int,int,int,__w64 unsigned long,class Mig::CDeviceProgressAdapter *)
void __thiscall Mig::CHardLinkHelper::Open(class UnBCL::String *)[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Unable to open store at E:\conference-pc\USMT[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Failed to select store. Path: E:\conference-pc[gle=0x00000002]
2014-06-12 11:53:24, Warning [0x000000] Internal error 23 was translated to a default error
2014-06-12 11:53:24, Info [0x000000] Failed.[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] An error occurred during store access[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] USMT Completed at 2014/06/12:11:53:24.718[gle=0x00000091] -
ESS Address Service - Area Code in Telephone Number Defaults to 000
Hi Gurus -
Our business noticed that when creating a new address using the US ESS Address service, the area code defaults to 000 in the telephone number (field AREAC) if there is not a value already in that field. Has anyone else's business complained about this? Does anyone know how to get rid of that default?
Any help would be greatly appreciated.
Thank you,
Mark.Hi Shikhil,
Thank you for your response. We have not modified the address infotype in the backend R/3 system and do not want to modify it. Are you saying that a modification to the table 0006 would be needed and make it CHAR instead of NUM for AREAC?
Thank you,
Mark. -
Using filters in business connectivity services
I am now completely confused by the BCS filter option. I added a Business Data List to a page and connected it to my external content type. Then I have configured 2 filters in SPD:
LocationID = User input (comparison)
AND
Address = wildcard
Default value for both is null and I checked to ignore the Filter if the value is null.
When I search for Address contains "City Name" it correctly returns items with that city in the address but when I search for Location ID equals 12345 it returns all of the items.
How can I fix this?
Thanks!Hi,
According to your post, my understanding is that you get all items when using filters in business connectivity services.
You need to make sure you define filter in external content type correctly.
If you refine the search results in the External Item picker, you can refer to:
How to: Define Filters for External Item Picker Controls
If you use Content Editor web part implement searching on the External List, you can refer to:
External List with BCS & Search Filters
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem with Business Logic Services Logic Editor
Hi,
I am trying to go to Logic Editor under Business Logic Services. I'm getting error that "Unable to launch xMII"
Is there any java related problem in my machine?
Regards,
AmaleshAmalesh,
What version of xMII are you using 12.0 by chance. If so goto the Java Web Start -> File -> Preferences -> and set your proxy to "None". I would not recommend reinstalling Java as this will not solve your problem and if you are on xMII 12.0, the recommended version is 1.4.2_13 as a minimum.
Regards,
Erik -
Vendor not released warning as an error message in shopping cart
Hi,
When we are creating a Purchase order in SRM R/3 system, If we select a vendor which is not released then we get the Error message saying Vendor is not released and processing stops there.
Similarly while creating a Shopping cart with the same vendor it just gives a warning message instead of error. Is there any way of converting the warning message in case of Shopping Cart to an error message ? Is there any BADI available ?
Thanks,
SreekanthYes when we are creating any shopping cart or any PO , for validations we are using one check badi.
Try this Badi :
BBP_DOC_CHECK_BADI.
Hope It helps...... -
DM 6-y address Book Sync leads to error code 0x80040fb3
DM 6-y address Book Sync leads to error code 0x80040fb3. I have done the following:
rebooted 6000+ tijmes (or mabe a bit less than that)
performed a security wipe on my device
reinstalled DM 6 software several times
Had "I-Yogi" technicians try to fix
Used "cellrepair service"
Bottom line--I'm not a computer guy. I just want my BB9550 Storm to be able to sync with outlook. Calendar, Memo and Tasks sync with no problem. Address books always stops after 121 records are synced and then I get the error code.
Definition of insanity is doing the same thing over and over but expecting different results. I'm now insane and don't know what to do.That is certainly one option.
If you want to continue, here is a KB for activating advanced logging to see if that provides you with anything useful:
KB01451How to turn on advanced synchronization logging if a wired synchronization fails
I've also heard on these forums that if you export your contact list from Outlook (to CSV, ASCII or something else), the order they come out in is the same order that the synchronization works in...which might better help you identify the offending record (which you could then delete and re-create).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
DG Observer triggering SIGSEGV Address not mapped to object errors in alert log
Hi,
I've got a Data Guard configuration using two 11.2.0.3 single instance databases. The configuration has been configured for automatic failover and I have an observer running on a separate box.
This fast-start failover configuration has been in place for about a month and in the last week, numerous SEGSEGV (address not mapped to object) errors are reported in the alert log. This is happening quite frequently (every 4/5 minutes or so).
The corresponding trace files show the process triggering the error coming from the observer.
Has anyone experienced this problem? I'm at my wits end trying to figure out how to fix the configuration to eliminate this error.
I must also note that even though this error is occurring a lot, it doesn't seem to be affecting any of the database functionality.
Help?
Thanks in advance.
BethHi.. The following is the alert log message, the traced file generated, and the current values of the data guard configuration. In addition, as part of my research, I attempted to apply patch 12615660 which did not take care of the issue. I also set the inbound_connection_timeout parameter to 0 and that didn't help either. I'm still researching but any pointer in the right direction is very much appreciated.
Error in Alert Log
Thu Apr 09 10:28:59 2015
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc (incident=69298):
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Thu Apr 09 10:29:02 2015
Sweep [inc][69298]: completed
Trace file:
Trace file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning and Oracle Label Security options
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1
System name: Linux
Node name: <host name>
Release: 2.6.32-431.17.1.el6.x86_64
Version: #1 SMP Wed May 7 14:14:17 CDT 2014
Machine: x86_64
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 29902, image: oracle@<host name>
*** 2015-04-09 10:28:59.966
*** SESSION ID:(416.127) 2015-04-09 10:28:59.966
*** CLIENT ID:() 2015-04-09 10:28:59.966
*** SERVICE NAME:(<db_unq_name>) 2015-04-09 10:28:59.966
*** MODULE NAME:(dgmgrl@<observer host> (TNS V1-V3)) 2015-04-09 10:28:59.966
*** ACTION NAME:() 2015-04-09 10:28:59.966
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
DDE: Problem Key 'ORA 7445 [nstimexp()+71]' was flood controlled (0x6) (incident: 69298)
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
ssexhd: crashing the process...
Shadow_Core_Dump = PARTIAL
ksdbgcra: writing core file to directory '/u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/cdump'
Data Guard Configuration
DGMGRL> show configuration verbose;
Configuration - dg_config
Protection Mode: MaxPerformance
Databases:
dbprim - Primary database
dbstby - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '180'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: dbstby
Observer: observer_host
Lag Limit: 180 seconds
Shutdown Primary: TRUE
Auto-reinstate: TRUE
Configuration Status:
SUCCESS
DGMGRL> show database verbose dbprim
Database - dbprim
Role: PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbprim'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'MANUAL'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbstby'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS
DGMGRL> show database verbose dbstby
Database - dbstby
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbstby'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbprim'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS -
In My Windows Server 2008 R2 OS in the Event Viewer there is an error pertains as Time-Service Warning ID 12 states-(Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator
for the domain at the root of the forest, so there is no machine above it in the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize
with an external time source. Otherwise, this machine will function as the authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.) What is this error?
And What is the remedy for this error?
System
Provider
[ Name]
Microsoft-Windows-Time-Service
[ Guid]
{06EDCFEB-0FD0-4E53-ACCA-A6F8BBF81BCB}
EventID
12
Version
0
Level
3
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2011-12-10T05:11:30.401496700Z
EventRecordID
18594
Correlation
Execution
[ ProcessID]
1152
[ ThreadID]
2500
Channel
System
Computer
WIN-6JQT8F105TE.mumthaz.contoso.com
Security
[ UserID]
S-1-5-19
EventData
MumthazMuhsinHello,
See that: http://technet.microsoft.com/en-us/library/cc756545(WS.10).aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft Student
Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified
IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Maybe you are looking for
-
How do I add multiple contacts to a group?
How do I add multiple contacts to a group on my Ipad?
-
Apple TV 1st Gen can no longer connect to wireless networks
My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to
-
Mobile List Bind aggregation - repeated values?
Hi all, i'm new to SAPui5 so please forgive me if this is already discussed. I'm calling a odata service (http://h03zdb.hcc.uni-magdeburg.de:8003/workshop/sessiona/12/Services/msgTab.xsodata/MSGTABLE?$filter=FROM%20eq%20%27STU-) and I get the values
-
I tried to update my iPod touch (latest generation) to the new iOS system. Midway through the 30 minute download of the new software, an alert popped up telling me that the ipod connected was in recovery mode and needed to be restored in order to con
-
Family share will not allow to accept the invitation
how to get this to work