Business Agreement replication error

Hi All,
I'm working on Contract account / business agreement replication.
I got below error in SMW01.
Business agreement class does not exist
For object BUAG , number range interval does not exist CRMC_BUAG_NUMBERS
One or more errors occurred when the BAPI was called
Does anyone know why this happened?
I'm using CRM 5.0 and cannot find any replication setting for business agreement object from SAP Best Practise (CRM Customizing Replication (B09)).
Would anyone got some document that I can refer to?
Thanks in advance.
Best Regards,
Catherine Wong

Hi Denis,
Thank you for your provided link.
Further question according to this setup guide, the template for contract account for Replication mapping table. I have below questions:
1. What is the contract account no should I put in the table TFK_BUAG_REF?
2. We do not required to replicate the account determination ID (Contract account) to tax determination ID (CRM). Do we still need to maintain table TFK_MAP_KOFIZ_SD?
Appreciate if you can further help on these.
Thanks a lot.
Best Regards,
Catherine

Similar Messages

Business Agreement Creation Error

Hi All,
Thanks to you all for giving prompt responses to my questions.
Today we are getting some error while creating a Business Agreement in CRM Web UI.
We are using CRM 2007 and ISU as a back end.
I am using IC agent as a business role and while creating a business agreement, I m getting an error message as "Edit payment conditions in Customizing".
Has anybody faced this type of error message?
Helpful response will be definately awarded.
Cheers,
Raj

Hi Denis,
Thank you for your provided link.
Further question according to this setup guide, the template for contract account for Replication mapping table. I have below questions:
1. What is the contract account no should I put in the table TFK_BUAG_REF?
2. We do not required to replicate the account determination ID (Contract account) to tax determination ID (CRM). Do we still need to maintain table TFK_MAP_KOFIZ_SD?
Appreciate if you can further help on these.
Thanks a lot.
Best Regards,
Catherine

Business Agreement Replication issue

Hi,
When we create Contract Account in IS-U, system is not generating BUsiness Agreement in CRM
We followed the below cofiguration steps to replicate the data:
Step1: Maintained number range(INT) in IS-U
Step2: Maintained Number Range(EXT) in CRM
Step3: Maintained CA category in IS-U
Step4: Maintained BA Class
Step5: Maintained FI-CA active in CRM
Please let me know am I missing any configuration here
Regards,
Pavan

Pavan,
Many things can prevent a replication ...
Have you already suceeded replicating a BP? -> general (technical) setup of middleware is ok
Is it possible to create a business agreement in CRM and it is replicated to the ERP system?
Have you checked the outbound and inbound queues in both ERP and CRM system? Is there a BDoc pending in SMW01?
We need quite a bit more information to understand better the possible issue :o)
Cheers,
Fritz

Business Partner Replication Error

Hi
We are replication customers into business partners. For the same I have done necessary standard configuration. Now when we are running the syncronisation cockpit then in PPO for customers, then they are getting selected but none of the customer is
being replicated and all we get zero items finally in the queue. Also in transaction /sappo/ppo3 we dont see any ppo order.. Let me know why business partners are not getting replicated. I am using APMD CVI integration and we are on ECC 6 and EHP 5.
Are we missing some switch or config steps.

Nik
we had received this error as well and for us it was because the industry mapping was not set. please refer the following notes and scn forums
SAP Notes: 1514237 and 956054
SCN links: The ASSERT condition was violated
ASSERTION_FAILED in XD01,XD02 while maintaining Industry in Marketing tab

Error while creating Business Agreement from IC web Client

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & sucessfully replicate the same to ISU as a COntract Account.
But when I Try to create the Business Agreement from ICWebClient I am gwtting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Hi,
Try maintaining an entry with blank risk class.
Regards
Prasenjit

Error While Creating Business Agreement via IC Web CLient

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & successfully replicate the same
to ISU as a Contract Account.
But when I Try to create the Business Agreement from ICWebClient I am
getting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Problem solved mainatain Risk Class as " "

CRM orders with error "Do not enter a business agreement for sold-to party"

Dear SDN'ler,
after creating orders in SAP CRM via ISA (CRM 4.0) and uploading them to R/3 all orders are created successfully in R/3 but an error message is sent back to SAP CRM in case of ALL orders.
Error message is the following:
"Do not enter a business agreement for sold-to party xyz"
Message no. CRM_BILLING011
Diagnosis
The field "FI-CA active" is not selected for the sold-to party 6000201 in the business master record. Since the business agreement is used in the component FI-CA, excluding the control of processes, it makes sense to enter a business agreement.
Procedure
Delete the entered business agreement.
==> Could someone please give me some more information about the mentioned "business agreement"? Where do I find field "FI-CA active" (in R/3 or CRM customer master data?)?
==> And how can I eliminate this error message for CRM orders in SAP CRM?
Thanks a lot.
Best Regards,
Rainer Gryschka

Please check the customising setting under following path:
SPRO --> Customer Relationship Management --> Master Data --> Business Partner -- > Business Agreement --> Define Basic Settings
Alternatively you may also check following customisation table using SM30 --> CRMC_BUAG_ACTV

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Help with replication of Contract Accouunt as Business Agreement in CRM.

I am Replicating ISU business objects in CRM.
I have already sucuessfully replicated teh BP. Now I am working on replicating Contract Account as Business Agreement.
I tried to follow the Set up and Load guide for replication of the same, however, could not follow it properly as steops did not seem very clear.
- I have assigned internal number range to ISU contract accounts and identical number range to CRM business agreements as external.
- I have also checked the tables COM_BUPA_CALL_FU,CRMC_BUT_CALL_FU,TFKFBS, CRMC_BUAG_ACTV
for the entries recommended in the setup and load guide. All is ok.
- I have also setup teh publication of object BUAG_MAIN.
-THERE ARE NO ENTRIES IN THE TABLE TFK_BUAG_REF.(I am niot sure if this is how it is suppose to be)
The Contract account is still not replicating in CRM as Business Agreement.
CAN ANYONE PLEASE PLEASE GUIDE ME AS TO WHAT I AM MISSING AND WHAT I SHOULD BE DOING NEXT?
I will be very grateful for any help or clue.
Regards,
Nasreen

Hi,
Please do the configuration at the below place.
Your problem will be solved.
IMG>Financial Accounting>Contract Account>Integration>Customer Relationship Management>Business Agreement>Determine Template for Contract Account Replication.
Warm regards,
Rahul

CRM 2007 Provider Order, Error: Business Agreement should be maintained for

Dear All
When I am creating provider order in CRM 2007, on saving order it is throwing error A business agreement must be entered for sold-to party XYX
Diagnosis
The field "FI-CA active" is not selected for the sold-to party 222 in the business partner record, that is, the payment transactions are processed via the R/3 component. A business agreement must be entered for this process.
I understand that business agreement will help in linking bp records with FI-CA. But if we dont wish to integrate with FI-CA then how to rectify this error
Thanks and regards

One simple way if you want to get rid of this error (mostly for testing purposes/may not be relevant for production system) is
go to CRM SPRO->MASTER DATA->BUSINESS PARTNER->BUSINESS AGREEMENT->DEFINE BASIC SETTINGS-> (HERE DE-ACTIVATE THE FI-CA INDICATOR).

Error: Contract object and business agreement do not match

Dear Friends,
I get this error on the service order.
Contract object and business agreement do not match
Any assistance would be appreciated.
Thanks and regards,
Aershid

Thanks Experts...
Sany.

Business Partner Replication to SAP ERP- ping getting error

Hi,
i'm configuring the Business Partner Replication to SAP ERP ,while ping im getting(Checking connection failed).
please refer the image below.
Could you please give me the suggestion.
Regards,
Prasad

http 403 basically indicates that your authentication towards HCI does not work proper. Please describe here how your authentication settings in the Communication Arrangement and on the corresponding IFlow is defined.

Initial Load of BUAG_MAIN (Business Agreements) IS-U = CRM

Hello. We are integrating ISU to SAP CRM 7.0.
We have been replicating Business Partners between the two systems for a couple of years, and now wish to begin replication the Business Agreements <=> Contract acconts objects (BUAG_MAIN)
In our development system, in order to successfully process the initial load of BUAG_MAIN, I had to RE-run an inital load of BUPA_MAIN. I am really unconfortable having to do this in our productive systems!
My question to you experts:
Is there a way to run an initial load of a dependent object (BUAG_MAIN) without having to re-run an initial load of the parent object? Any suggestions would be greatly appreciated!

Hello Pratik,
- There are no dumps in ST22
- There are no errors in SMW01
- No. range settings are set as following:
CRM: Master Data-> Business Agreement-> Define Number Range for Business Agreement:
No.     From number         To number          Ext.
01       000100000000       000199999999     X
02       000200000000       000299999999
ERP/IS-U: Financial Accounting (New)-> Contract Accounts Receivable and Payable-> Basic Functions->Contract Accounts->Number Ranges and Contract Account Categories
No.     From number         To number          Ext.
01       000100000000       000199999999
02       000200000000       000299999999     X
But before inital download we have set all no. ranges to External as prescribed in the set-up and load guide for business agreements and contract accounts.
(There is just one Business Agreement Class and one contract account category)
Hope to hear from you soon.
Kind Regards
Saima

Business agreement - Edit payment conditions in Customizing

Hi Guys,
I am getting below error when i am trying to create business agreement from CRM IC.
Error - Edit payment conditions in Customizing
I have completed all the required setting in CRM as well as in ISU for business agreement creation as well as replication.
Can someone suggest some solution
Thanks,
Nitin

Hello,
If you create a business agreement in IC WC you have to maintain the
customizing "Creation of Business Agreement"
But it may be the case that you maintained only payment relevant
parameters for customizing node
"Allocate Payment-Relevant Parameters to New Business Agreements"
for payment type "By Automatic Debit". In your case payment type
"By Invoice" may be needed and may not be maintained.
Please add this in customizing via the path: Master Data ->
Business Partner -> Business Agreement -> Creation of Business
Agreement.
Please also make sure you use a BP with role "Sold to Party" when
creating business agreements, as this is needed.
OR
See
Master Data -> Business Partner -> Business Agreement -> Creation of
Business Agreement -> Allocate Payment-Relevant Parameters to New
Business Agreement
In this customizing table check the country is maintained
I hope this information is helpful.
Regards
Olivia

A business agreement must be entered for Payer

Hi
While creating sales order showing floowing error message
A business agreement must be entered for Payer xxxxxx
if i go in Details it is showing following messge:
Diagnosis
The field "FI-CA active" is selected for Payer xxxxx in the business partner record, that is, the payment transactions are processed via the R/3 component. A business agreement must be entered for this process.
Procedure
Enter a valid business agreement.
I am not getting where i need to main these settings.currently i am working on CRM 7.0
Can u please help me out to solve this issue
Thanks & Regards
Kishore Kumar

One simple way if you want to get rid of this error (mostly for testing purposes/may not be relevant for production system) is
go to CRM SPRO->MASTER DATA->BUSINESS PARTNER->BUSINESS AGREEMENT->DEFINE BASIC SETTINGS-> (HERE DE-ACTIVATE THE FI-CA INDICATOR).

Business Agreement replication error

Similar Messages

Maybe you are looking for