Business- and Process- Oriented CM Study for global CPG company

We have a great business- and process- oriented Business Benefits CM study that we have just finished for a global CPG company.
Contact PrinciplesGroup at 508.613.2222 / Mike Tierney David Boulanger

Dear Dishaa,
The above link does not work for me. In case you have problems too, please try the following link:
http://wiki.sdn.sap.com/wiki/dashboard.action
Regards,
Marcella Rivi
SAP Business One Forums Team

Similar Messages

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

Obtain and Process Clicked Cell Contents for Detail Fetch

I have a report region on a page. It is a bit different from the usual report in that every* cell contains key data....Imagine a "Periodic Table of Elements" chart... it's analogous to that.
What I need to do sounds easy enough. I need to allow the user to click a column on the report region and then show the details behind the selected value (for example in a popup window). Normally, I would just do this by creating a link on the column. However, this situation is a bit different in that every* cell contains the key data from which to pull details.
Moreover, the data within each cell needs some parsing to obtain the key values. That is, the values are all glomed together in one big string (with HTML formatting) and need to be extracted before using them to set page item values on the detail page.
Is it possible to trap the text from the clicked cell in a report table (with a Dynamic Action perhaps)? If I could trap it, I could parse it in the javascript.
Thanks,
-Joe

Actually, I thought of a better way to do this.
I am going to manually add in anchor tags to the cells up front. This will allow me to make the anchor tags contain the parsed data that I need.
I am already accessing and setting some things in a Dynamic Action.
var tdCollection = document.getElementsByTagName("td");
for (var i=0; i<tdCollection.length; i++)
if ( tdCollection.getAttribute("headers") != null )
findMeText1 = tdCollection[i].getAttribute("headers");
findMeText2 = findMeText1.substr(0,3);
if ( findMeText2 == "COL" )
findMeText3 = $(tdCollection[i]).text();
findMeText4 = findMeText3.substr(findMeText3.indexOf( "|", 0 ) + 1);
$(tdCollection[i]).parent().children("td[headers='" + tdCollection[i].getAttribute("headers") + "']").css({"background-color":"rgb(" + findMeText4 + ")"});
I am already accessing all of the report columns anyway to set the background color. So, in this same loop, I can create an anchor tag. (Hopefully).

Idoc type, message type and process code for EDI 940 & 945

Hi,
We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
Thanks in advance for the help.
Regards,
Gajendra

Hi Gajendra,
For EDI940, you can use message type SHPORD or WHSORD, IDOC type DELVRY01 and process code DELV.
For EDI945, you can use message type SHPCON or WHSCON, IDoc type DELVRY01 and process code DELV.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Need a document with steps and process for IBCM implementation

Dear Frds,
I need a documents which contains steps and process to implement IBCM for SCCM2012.
I have following things in Intranet:
1) SCCM2012 in intranet and clients are reporting at this movement.
2) Intranet based Domain PKI infra.
Thanks.....
Raja

I strongly suggest taking a look at Direct Access. Most people looking at IBCM end up going with Direct Access since it requires fewer steps/less infrastructure and yet provides far more value.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Prcoess chain failrure at AND process step

Hello,
I have a global process chain wherein we are loading data from two infopackages and that is then followed by an AND event for further data activation steps.
This chain has been working fine for months. All of a sudden, for the past three nights in a row, the AND event has been throwing an error as soon as the first of the initial local chains completes. The error is 'This AND process is not waiting for event RSPROCESS, parameter...,' and then it goes on to give the parameter associated with the predecessor chain that has completed. The AND event turns red and does not trigger the subsequent processes when all of the predecessor chains complete. Also, the repeat option does not work. The subsequent processes have to be kicked off manually.
Any suggestions for how to correct this problem?
Thanks!

Hi,
I know problem is solved by new creation.
But check these notes:
Correction: Error in AND process after restart
SAP Note Number: [1083103|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler]
SAP Note [850668|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=850668] Correction: No multiple triggers after RSPROCESS event
Regards
Andreas

'AND' process in a process chain failure - need help

For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGE

Thanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian

Process chain AND process

Hi,
I have a process chain that has two parallel processes of loading DSO and Infocube data. There are two infopackages on one side and two on the other side. The two processes are connected with and AND process at the end and after that there is a datastore activation process.
When I executed the process chain, the infopackages on both sides started loading data. The two infopackages on the left side finished first while the second infopackage on the right side had not finished yet when the AND process errored. I get the following message:
This AND process is not waiting for event RSPROCESS , parameter
47VKUORHMXQKR2AN73AVAR0C9
After the AND process I have a Datastore generation process and I want it to continue only when all infopackages have been loaded.
Why does the process stop at AND even though all infopackages have not finished yet?
thanks
Michalis

There was no error message in ST22 or SM37. There was very little info to go on. I just deleted the requests and run the process chain again and there's no error. However the process chain does fail at a later step.
Update Datastore Object Data (Further update)
I don't know what that further update is for. It was automatically selected in my Process chain when I selected the infopackage for the DSO.
There's a MESSAGE_TYPE_X error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSM2" - in "RSSM_MON_WRITE_3".
    The main program was "RSBATCH1 ".
    In the source code you have the termination point in line 2659
    of the (Include) program "LRSM2U16".
    The program "SAPLRSM2" was started as a background job.
    Job Name....... "BI_PROCESS_ODSPROCESS"
    Job Initiator.. "CSPAPADM"
    Job Number..... 14103000
Source Code Extract
Line SourceCde
2629       CALL FUNCTION 'RSSM_GET_TIME'
2630         EXPORTING
2631           i_datum_utc = rsreqdone-tdatum
2632           i_uzeit_utc = rsreqdone-tuzeit
2633         IMPORTING
2634           e_timestamps = l_s_status-t_timestamp.
2635       IF rsreqdone-tstatus(3) = icon_green_light(3) OR
2636          rsreqdone-tstatus(3) = icon_red_light(3).
2637         CALL FUNCTION 'RSSM_GET_TIME'
2638           IMPORTING
2639             e_timestamps = l_s_status-ts_proc_ended.
2640         l_not_yellow = 'X'.
2641       ENDIF.
2642       IF l_not_yellow = 'X'.
2643         CALL FUNCTION 'RSSTATMAN_SET_STATUS'
2644           EXPORTING
2645             i_s_status    = l_s_status
2646             i_with_commit = 'X'.
2647         IF l_s_status-t_status(3) = icon_green_light(3) AND
2648            l_s_status-dta_type   = 'ODSO' AND
2649            t_data-aufrufer <= '70'.
2650           CALL FUNCTION 'RSS2_CALLBACK_ODSADM_ODS_SUCC'
2651             EXPORTING
2652               i_ods = l_s_status-dta(30)
2653               i_rnr = l_s_status-rnr.
2654         ENDIF.
2655       ENDIF.
2656     ENDLOOP.
2657     IF sy-subrc <> 0.
2658       IF t_data-aufrufer <> '09'.
2660       ENDIF.
2661     ELSE.
2662       IF l_not_yellow = 'X'.
2663         CALL FUNCTION 'RSB1_OSNAME_TO_ICNAME'
2664           EXPORTING
2665             i_osource        = g_s_minfo-oltpsource
2666 *           I_OSTYPE         = RSAOT_C_OSTYPE-TRAN
2667           IMPORTING
2668             e_icname         = l_icname
2669           EXCEPTIONS
2670             name_error       = 1
2671             OTHERS           = 2.
2672         IF sy-subrc = 0.
2673           CALL FUNCTION 'RSAWB_MAINTAIN_DTA'
2674             EXPORTING
2675               i_method                   = rsatr_c_dta_get
2676 *             I_TYPE                     =
2677               i_objvers                  = rs_c_objvers-active
2678               i_dta                      = l_icname
Any idea what that means? Also do I need that further update step in my process chain?

AND Process

Hi Every one,
My Process chain is getting failed in the AND Process.Due to this all my dependent Process chains also not running.
How can i make the AND process sttaus to green?Please drop all your valuable suggestions on this.
Below is the error message.Is there any Function module to change the status to green and resume the loads?
*This AND process is not waiting for event RSPROCESS, parameter 4FCRJ6Y13IB4REHCKENODFOK0 E RSP
Thanks in advance,
Chandu.

Hi,
1. Right click on the failed AND process and goto chain tab, there you will find the Instance and variante take those.
2. goto SE16, give table name as RSPCPROCESSLOGpress enter give the variant and instance that you have taked previously-- execute.
3. take the LogID and Process Type from the entry it is displayed.
4. Goto SE37, give the FM name RSPC_PROCESS_FINISH and execute.
5. in the entries give the Log ID, Process Type , Variant and Instance and Status as 'G' and presss execute.
Now the further processes will tirgger when you execute that.
Hope this helps.
Veerendra.

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Process Chains AND process error

Hello all,
I have process chain for weekly master data loading. In one step after loading master data we have AND process and there after Attribute Change Run process.
When I ran process chain the Master Data load process is successful ( upto that it is green in log view ) . After this process AND process is showing RED.
The display message is as follows:
This AND process is not waiting for event RSPROCESS , parameter
423HLT8HZUIQTNDHWZJFNPBRC
Please let me know if any one has SOLUTION to this. Thanks in advance.
Yours
SRM

HI SRM,
That means, The proess after AND is watining for one process, the same
process which ur process waiting is already using by some other process.
That means for one process two process chains are calling at a time.
So this process chain failed due to the process is running by other process
chain.
Now, after 10 or 30 min run again your process chain. if it runs successfully
then maintain the time gap between the two process chain which are using
the same process.
Hope the answers is suitable for u.
Thanks
Rajesh

Difference between Thread and Process

Hi!
I was googling about this subject, and I found this old thread on google: http://forum.java.sun.com/thread.jspa?threadID=580508&messageID=2939031
My specific doubt is: can one thread inside in a process affect other thread inside in other process?
But, actually, the terms thread and process are not clear for me yet. I don't know what is the exact difference yet.

> If I start a JVM, and Microsoft Word, and a web
browser, that's three processes. A process is an
OS-level construct.
Threads refer to concurrent execution paths withina
given process. Just like multiple processes canrun
in parallel within the OS, so can multiple threads
run in parallel within a process.
That's exactly what I understood. So, I suppose that
a thread in a process cannot affect other thread in
other process, can it?Not at the Java language level.
I mean, the wait( ), notify(
), etc, methods do not make sense if you consider
threads of different process, right?Right. Those are just methods that you call on objects. The same rules apply to them as to other methods. Now, with RMI, it might be possible to call wait(), etc. on a remote object. I've never use RMI, but I don't think that actually works. If it does, I expect it would be in an RMI tutorial.
Indeed, very confusing. They could facilitate,
defining a clear distinction between thread and
process.Well, there is a distinction in their "interface," if you will. It's just that their implementations can overlap.
Kind of like how a List and a Set are different, but you could implement a Set by composing it with a List.

Business Process Oriented Development of Data Warehouse Structures

I've recenltly read an interesting paper by Michael Böhnlein and Achim Ulbrich-vom Ende:
Business Process Oriented Development of Data Warehouse Structures .
It discusses the derivation of data warehouse structures from business process models, as opposed to deriving relevant datasets from the underlying operational data sources.
The Semantic Object Model (SOM) methodology is also introduced. The SOM approach can be useful for the modeling of business systems as well as analysis and design.
Cheers, Davide

I've recenltly read an interesting paper by Michael Böhnlein and Achim Ulbrich-vom Ende:
Business Process Oriented Development of Data Warehouse Structures .
It discusses the derivation of data warehouse structures from business process models, as opposed to deriving relevant datasets from the underlying operational data sources.
The Semantic Object Model (SOM) methodology is also introduced. The SOM approach can be useful for the modeling of business systems as well as analysis and design.
Cheers, Davide

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

Business- and Process- Oriented CM Study for global CPG company

Similar Messages

Maybe you are looking for