Business area activation of previous year

Hi,
How can I activate the business area in last 3 years transitions?
Actually in our company code right now they are planning to activate the business area. Once they could create the business area how to set the configuration of last 3years transactions? how can they have business area activated for all those old transactions happened without business area??

Hi Karpagam,
Please refer this site below.
http://help.sap.com/saphelp_47x200/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
Regards
Velu Mudaliar
FICO
Satyam Computer
India

Similar Messages

FI-AA new depreciation area - treatment depreciation previous years

Hi,
In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
The depreciation calculation and resulting postings for the current year are correct.
However I wonder what will happen with the data for the previous years;
when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
Many thanks in advance for your much appreciated help.
Kind Regards,
Arjan

Can you please tell me how you added the new depreciaton area to the existing asset masters in those classes ? To get the new depreciation area to show up? We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes. If you figured out how to do that it would sure help us out. I look forward to your response. We're in 4.7.
Thanks
Karla
Never mind found it from reading other posts. I used AFBN and it worked. Thanks
Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM

Business Area Clearing considering Prior year transactions why?

HI SAP Experts,
I have a problem in Business Area Clearing with one of our client. After running Business Area clearing in F.5E. I went and checked the log in F.5F.
I found that the system is considering Prior Year transactions also, though they run the Business Area clearing every month.
What could be the problem? Where it went wrong?
Can anyone guide me on this!!
Thanks & Regards
Omprakash RA

HI
Thanks for the prompt reply.
But what I meant to say here is it is considering all the prior year transactions for the clearing.
Hope I'm clear now.
Thanks
Omprakash RA

Business area Financial statement F.01

hai,
we are in 5.0. i have problem with business area wise report. while taking P&L account business area wise, the error shows as invalid output. But i have created 3 business area as per the client requirement and all the entries posted through business area. I have checked up oby6 for business area activation.
The report is available only for company code level not on business area wise.
Can any one help in this regard.
I have activated BA balance sheet also.
Please help.
Thanks,
Sujai C

Hi,
I checked the Confi,every thing is set. But when i tried different reports but nothing is displayed in business area balances even after posting transaction in a new fiscal year & period.
I have actived BA in new fiscal year and assigned BA to cost center & assets and posted transaction.
I checked it in table BSEG for the doc posted, BA is updated in the table. But why is it that the amount is not displayed when BA balance sheet.
Can some please help me out.
Is there any OSS note or program that has to be executed for this issue.
Its urgent please help.
Thanks,
Chandu

Change business are in cost center

Hi
How to change business are in the already created cost center ???? Pls advice
Thanx

Hi
SAP note 62716 covers this process to change BA if data already exists:
I have copied below in case you dont have access to notes:
Symptom
When you attempt to change the company code or the business area in the master record of the cost center, the system displays message KS020 or KS134 because dependent data already exists, or the system displays message KS021 because the change interval is not set to the year limits.
Enhancement: As of Release 4.6C the report RKACOR06 is enhanced so that you can also change the master data from business processes (CO-ABC, Activity Based Costing) correspondingly.
Reason and Prerequisites
For actual postings, the company code is updated in the document. It is therefore not possible to change the company code of the participating account assignment (for example cost center) later on.
The checks for dependent data, however, are carried out on year level. For this reason, it is not possible to change the company code or the business area during the fiscal year.
Solution
Using report RKACOR06, you can also make changes to the company code and the business area in the master record of the cost center during the fiscal year if the following requirements are met:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval or afterwards.
3. There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02 (for example, by changing the cost center manager).
If the system contains dependent planning data in a plan integrated version, any respective profit centers and extended general ledgers that exist must be restructured. For profit center accounting, you can use Transaction 1KE0 for this purpose.
Caution! If you change the company code of a cost center, a reversal of a posting in a different period can no longer be carried out if the cost center is assigned to another company code in the reversal period.
Report RKACOR06 is contained in the standard system as of Release 3.1I.
For prior releases, you can download the report from the FTP server sapserv3 from the directory /general/R3server/abap/note.0062716.
Report RKACOR06 does not generate any change pointers. Thus, if you want to send the change of cost centers via ALE, use Transaction BD16.
If you cannot change the BA for some other reason, please provide details.
Regards, Elaine

Business area missing in documents

Hi
I have few documents which are posted with out Business Area is there any solution, other than reversing the document and post, hence these documents are belong to previous year.
Regards,
Bhaskar

Hello,
There is no way that you can update business area.
If it is really critical situation to update business areas,
go to SE16N
enter the table
in transaction bar enter &sap_edit
enter
debugging mode gets started
then execute.
Edit the table (be cautious)
Note that you are NOT doing this in production.
Regards,
Ravi

Business area is not being specified in cost center master.

Hello Professional friends,
When i specify Business area in existing cost center master data, it appears an error massage - "Field change Business Area is not possible (transaction data already exists)"
I tried to change the validity by analysis Period, when i do this, it appears anothe error " No further processing (contact your system administrator)"
Its user critical requirement that he want to specify business for all new and existing cost center.
there is no problem with new cost center.
Waiting for valuable suggestion.

Hello,
The rule is that if you make any actual or planned date within the current year, you cannot make any changes to any of the organizational units within the cost center master.
From the next year, you can remove / change the business are within the cost center master, provided:
You have to change the validity period of the cost center master by doing:
Go to KS02
Edit ==> Analysis Period
put your cursor on the valid from e.g. 01.01.1900 and click F5 (the line gets selected and become blue)
Click on Other Analysis period and then change the analysis period. The new analysis period must be starting with the first date of the next fiscal year.
Now change or remove the business area.
For this year, surely you cannot change the business area, since there postings.
Do not try to write any ABAP program to change the standard in order avoid the business area change error, it would end up data inconsistencies.
Thanks,
Ravi

Vendor balance Business area wise

Hi
I have one requirement to vendor balance business area wise
for this report I have taken 0FI_AP_3 data source and 0FIAP_O03 ods
I have the fileds in target '0DEB_CRE_LC'
vendor cumulative balance business area wise given fiscal year period
what are the maintained in R/3 transaction code is "FK10N"
how can i deging in Bex designer
plz advise me
rgrds
smitha
Edited by: sonalismita on May 11, 2009 3:17 PM

Hi sonali,
For that,
Drilldown report on Venodr, so put characteristic in Row.
In colum for opening balance, create a calculated keyfigure where fiscal year period LT 'Selected period'. which is balance.
For Closing balance, create a calculated keyfigure where fiscal year period LE 'Selected period'. which is balance.
For Debit and credit colum. create calculated key figure and restrict fiscalyear period = "selected period", with debit credit indicator = 'H' and 'S'. respectively.
Regards,

Authority Check business area / trading partner business area in FB50

Hi,
Through FB50, the authorization object F_BKPF_GSB controls the business area and the trading partner business area
We are looking to authorize users on all trading part business area) but only on their business area (currently handle with org levels in PFCG).
Any idea?
julien

Srinivas is right. The validation only works when a CO document is being created due to a posting or allocation and not at the point of filling in master data. If you have business area active in your company code then you must include a business area. I think the best you can do in this case is to either deactivate the business area in company or create a dummy business area.
Regards,
Kenneth

CO Validation check Business Area

Hi gurus, so my request is to give me solution about my validation.
i wish skip business area to be fill in field - business area in KS01.
My validation is:
Prerequisite: Controll. area = '1000'
Check:Company Code IN COMPANYCODES (set all company codes ) AND not Business Area in BA(set all
Business Area)
Message: error (e)
but nothing happend - what i create wrong? my business area is activ in company codes.

Srinivas is right. The validation only works when a CO document is being created due to a posting or allocation and not at the point of filling in master data. If you have business area active in your company code then you must include a business area. I think the best you can do in this case is to either deactivate the business area in company or create a dummy business area.
Regards,
Kenneth

Changing business area on a cost center

We mainly use HR, but we use some FI/CO for accounting. (I am no expert in FI/CO whatsoever - so please excuse any incorrect terms).
Our users have entered incorrect business area to a cost center.
This business area is now registered on employees, and payroll/posting has been run up unitil October 2010.
If I try to change business area from 01.11.2009 (realize it is probably not good to change earlier due to postings); I get the following error message: "Field change Business Area is not possible (transaction data already exists)"
In addition, the message says: If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...". However, trying to change the analysis period I am told I have to choose year end.
My questions are:
1. Is there a way I can change business area from 01.11.2009 ?
2. Is there a way to change area earlier - and if so, what are the impacts+
I appreciate any help
Kirsten
Edited by: Kibo on Oct 11, 2009 2:44 PM

Hi Kirsten,
Normally, it's not possible to change business area during a fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal year since you then would have different postings - cost center belonging to different business areas within the same fiscal year. Meaning that it is possible to change the business area for the next fiscal year like described in the long text of the error message KS134. The reason is that it is to avoid inconsistency update of the table (COSS, COEP, or COSP).
Although, If the following requirements are met, than it is is possible to change the business area during a fiscal year with the
help of the note 62716:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval
    or afterwards.
3. There must already be an analysis period for the respective cost
    center which starts on the first day of the chosen period. If this
    is not the case, you can create one with 'Change cost center'
If the requirements are met, you can run the report RKACOR06 in SE38
safely. I recommend you to execute the report first with Test Run on
your test system.
Regards,
Greta

Cost Center validity period change & Business area assignment to cost cente

We are facing with error KS134 - Transaction data already exists for the period.
We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ).
Hence even creation of the new cost center is not possible. We alrady have Validity Period from 1.04.2005 to 31.12.9999.
Is there any alternative solution ?
Sumeet

Hi Sumeet,
The fields in Cost Center Master Data are "Time-Dependent" and you can see the Time-Dependency of each field in OKEG transaction code where you can find "Business Area" to be "Fiscal-Year" based.
So, if at all you need to change the Business Area, it would be possible in next financial year only...
And also, because, your Cost Center is defined from 01.04.2005 to 31.12.999, there is no way that you can change the validity period so as to create / extend in the same period-lap.
I hope you got it...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Apr 8, 2009 3:11 PM

Business area change in cost center

Dear Expers,
Please guide me,
How to change the business area in cost center master data, which is having already data in that cost center, any programme to change, if i change B.A what will happen, any problem to old data which is posted with that cost center.
Regards
Chandu

Hi,
It is not possible or allowed to change the master data field: business
area of the cost center once you have made postings to this cost center
period.
And normally it's also not possible to change business area during a
fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal
year since you then would have different postings - cost center
belonging to different business areas within the same fiscal year.
Meaning that it is possible to change the business area for the next
fiscal year like described in the long text of the error message KS134.
The reason is that it is to avoid inconsistency update of the table
(COSS, COEP, or COSP).
To change business area,you should create a new period for the cost
center with no postings to this new period and change BA then.
But if you want to change BA during FY,please review note 62716
as well as the requirements stated in the note.
I hope it helps,
Regards,
MLM

Business Area not captured in TAX Accounts

When accounting entry is generated for Sales of a particular part, the Business Area which is captured in the individual Sales Order is captured in the individual ledgers, but the same is not reflected in the TAX ACCOUNTS like CST/VAT Payable. Hence, filtering of ledger accounts for CST/VAT payable cannot be done Business Area wise. There is only one common GL Account for each type of tax , say, CST/VAt Payable etc. Pls suggest the solution
Regards
Sanil Bhandari

Hi,
Before executing the t.code: F.5E, you have to follow the mentioned system... otherwise u will end up with same problem.
1.First u should identifiy the gl account and balance with no business area
2.You should identify the relevant business area.
3.go to t.code: OB65 and remove the business area activation indicator(u have to do this process, when no users working on the system)
4.You should post an adjustment entry by using t.code:F-02 as below.
gl account 100000    Business area 1000,2000
40 100000 a/c with blank business area      1000
50 100000 a/c     BA 1000                            999
50 100000 a/c     BA 2000                                1
If u didn't follow the above procedure, system will updated blank business area with business area in other line item. If two business areas are maintained in two line items, then system won't updated blank business area field in first line item.
5. Then execute the t.code:F.5E, make sure that above entry not coming in this screen.
6. If the above mentioned process is complete, then chcek UR gl account balance in fs10n with business area wise. If everythig was followed perfectly, then gl account balance under blank business area will be zero.
7. Then go to t.code :ob65 once again and activate the business area indicator.
Note: first create the same scenario in development or quality, if u satisfied with results follow the same in production client.
We got this kind of issue in 2005, then we rectified this issue with the steps mentioned above.
all the best
Prasad

Cost Center assignment to Business Area

Hi,
Please tell me the Cost Center assignment to Business Area.
Also please let me know that in our system, it is configured or not???
Plz guide..
Anil Kumar
Moderator: Please, do not use SMS language. The assignment of cost centre to BA is in the master data of the cost centre itself

Hello Robert,
You can have only one business Area in one Fiscal Year.
So for the current year, you should keep the Business Area, but you can change it for future FYs.
To do that go to menu > Edit > Analysis Period and click "Other Analysis Period". Than you should be able to change the Business Area for future FY. You have to select the Analysis period, so it begins when FY is beginning...
Pls reward if helpfull.
I hope this helps.
Richie.
Message was edited by:
Richie

Business area activation of previous year

Similar Messages

Maybe you are looking for