Business Area assignment to cost center

First time we have assigned Business areas to Cost Centers on 31.03.2009 effective from 01.04.2009. But since some of the cost centers(28 nos out of 300) have Transaction data (error message KS134) we could not assign Business Areas.
Hence we have decided to create New cost centers in place of these 28.
And now we are testing this scenario in test server. Since we will have to replace the existing cost center assignments with Work center(PP/PM), Asset(FI/IM), Positions(HR), we have started with Asset transaction AS02.
SAP is not allowing to change the existing Cost Center assignment to Asset & it is disabled. But since we are going for New cost centers the Assignment of old cost centers to Assets can not be continued.
Hence pls. provide the solution on how to change of Cost Center assignment to Asset effective 01.05.2009 ? Also is this right approach to create New cost centers for the error message KS134 ?
With Regrds,
Shrirang

hi
check the settings in asset accounting for the additinal account assignment.

Similar Messages

Cost Center validity period change & Business area assignment to cost cente

We are facing with error KS134 - Transaction data already exists for the period.
We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ).
Hence even creation of the new cost center is not possible. We alrady have Validity Period from 1.04.2005 to 31.12.9999.
Is there any alternative solution ?
Sumeet

Hi Sumeet,
The fields in Cost Center Master Data are "Time-Dependent" and you can see the Time-Dependency of each field in OKEG transaction code where you can find "Business Area" to be "Fiscal-Year" based.
So, if at all you need to change the Business Area, it would be possible in next financial year only...
And also, because, your Cost Center is defined from 01.04.2005 to 31.12.999, there is no way that you can change the validity period so as to create / extend in the same period-lap.
I hope you got it...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Apr 8, 2009 3:11 PM

How to suppress business area feild in cost center master data urgent plzzz

how to suppress business area feild in cost center master data

Hi ,
Please check these notes
Note 606933 OKEON: Business area is no required entry field
Note 506308 OKEON: Business area financial statement prevents change
Note 422801 KS01 with template does not check business area
It might be possible to create a modification,.
Please assign points if it useful
Regards
Ravinagh Boni

Changing business area on a cost center

We mainly use HR, but we use some FI/CO for accounting. (I am no expert in FI/CO whatsoever - so please excuse any incorrect terms).
Our users have entered incorrect business area to a cost center.
This business area is now registered on employees, and payroll/posting has been run up unitil October 2010.
If I try to change business area from 01.11.2009 (realize it is probably not good to change earlier due to postings); I get the following error message: "Field change Business Area is not possible (transaction data already exists)"
In addition, the message says: If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...". However, trying to change the analysis period I am told I have to choose year end.
My questions are:
1. Is there a way I can change business area from 01.11.2009 ?
2. Is there a way to change area earlier - and if so, what are the impacts+
I appreciate any help
Kirsten
Edited by: Kibo on Oct 11, 2009 2:44 PM

Hi Kirsten,
Normally, it's not possible to change business area during a fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal year since you then would have different postings - cost center belonging to different business areas within the same fiscal year. Meaning that it is possible to change the business area for the next fiscal year like described in the long text of the error message KS134. The reason is that it is to avoid inconsistency update of the table (COSS, COEP, or COSP).
Although, If the following requirements are met, than it is is possible to change the business area during a fiscal year with the
help of the note 62716:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval
    or afterwards.
3. There must already be an analysis period for the respective cost
    center which starts on the first day of the chosen period. If this
    is not the case, you can create one with 'Change cost center'
If the requirements are met, you can run the report RKACOR06 in SE38
safely. I recommend you to execute the report first with Test Run on
your test system.
Regards,
Greta

Business area change in cost center

Dear Expers,
Please guide me,
How to change the business area in cost center master data, which is having already data in that cost center, any programme to change, if i change B.A what will happen, any problem to old data which is posted with that cost center.
Regards
Chandu

Hi,
It is not possible or allowed to change the master data field: business
area of the cost center once you have made postings to this cost center
period.
And normally it's also not possible to change business area during a
fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal
year since you then would have different postings - cost center
belonging to different business areas within the same fiscal year.
Meaning that it is possible to change the business area for the next
fiscal year like described in the long text of the error message KS134.
The reason is that it is to avoid inconsistency update of the table
(COSS, COEP, or COSP).
To change business area,you should create a new period for the cost
center with no postings to this new period and change BA then.
But if you want to change BA during FY,please review note 62716
as well as the requirements stated in the note.
I hope it helps,
Regards,
MLM

Business area field in Cost center

Dear Guru's
We created a Cost center for a validity period of 01.01.2006 to 31.12.9999 with a business area of ABC.
Transactions and line items are existed in the cost center
Now we decided to change the business area of the cost center from the ABC TO XYZ. I went to KS02 here the filed is editable mode when i enter the new business area for cost center it gives a message in the following manner.
Field change Business Area is not possible (transaction data already exists)
Message no. KS134
please could you help me how to change the field.
Thanks and Regards

Dear Laxmi,
There are records that have been created and hence the system is not allowing you to change the data. Change the analysis period and then system would allow you.
KS02 -> Enter the Controlling area -> Enter the cost centre -> go to menu "EDIT- Analysis period" -> click on the button "Other Analysis Period" and change the validity.
Regards,
Naveen.

Assign ment of Parallel currencies & Business Area related to cost center

1.when we are creating cost center we will give business area,,,after posting to that business area,,can we change the business area???????
2. whe1.Conducted power user, End user training and
involved for preparation of Business operating
procedures
2.Preparation of Documentation, Functional
Specification for manual interfaces, Unit Testing and
Configuration control documents.
3.Analysis of Automatic Payment programme
4.Analysis of Interfaces, Solving tickets and
interacting with the Users
5.Analysis of Settlement rules for AUC in capital
projects re we can assian 2nd parellal currency???
6.Conducted Positive Unit Testing, Negative Testing in
Development client and Quality Assurance Client in the
Areas of GL AP AR and Controlling area

no once posted u cannot change the business area assignment of a cost center

Suppress business area field in cost center master data(KS01)

Hi
As the client is not using business area, he don't want the business area field to appear in the cost center creation screen(KS01).
Is there any work around to this
Regards
Aravind

Hi Aitipamula,
Have you looked transaction code <b>OB65</b> to deactive the business area?
Also you can technically use transaction variant (t/code SHD0) to supress the field. For more information, please check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Error: Regarding Business area in not assigned to cost center

Hi Expert,
while saving the WBS , getting error message that business area is not valid for this cost center, even after mapping business area in to cost center in KS03. still getting this error. and check all cobination between business area and cost center is correct..please guide some one how to correct it.

Hi
CrossCheck in OKB9 Account Assignments -Detail per Businessarea/Val.area - check for the cost center to which Val.area it is assigned. change it as Per your requirments.
this will solve your issue.
Thanks
Goutam

Business Area v/s Profit Center

Hi Friends,
Can some body tell me the major differences between a Business Area and a Profit Center
or pls send me to mail i .e [email protected]
Thanking u,
Siva S.

Hello,
Business area is higher in hierarchy compared to Profit center. A business area can have multiple PCs assigned to it.
Business area is used for reporting for internal -management accounting purpose. Financial statements for internal purposes can be drawn for BA just as for Co Cd for external and auditory purpose.
Profit center are operation entities and lower in hierarchy, have a person reponsible and many cost centers can be assigned to one PC. It is used only for statistical purpose.Profit center data canbe rolled up to BA data.
Also see:
http://help.sap.com/saphelp_47x200/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
Thanks,
Sourabh

Message error in trx CA01 "No activity types assigned to cost center &contr

Hi,
I'm getting the message error CR091 "No activity types assigned to cost center &controlling area & on &" from trx CA01.
How can I link the cost center to an activity ?
Thanks
Best Regards
Moderator: Please, avoid asking basic questions

Cost center to an activity is linked through KP26.

Do not assign to cost center

Hello
I am facing this problem at the time of making entery through Tcode f-02
please let me know if you have any Idea
Thanks
Do not assign to cost center (not active in CO area ASHI and FYear 2007 )
Message no. KI230
Diagnosis
You assigned an account to a cost center. However, no cost centers are active for controlling area ASHI in fiscal year 2007.
System Response
This posting is not allowed.
Procedure
Activate Cost Center Accounting for fiscal year 2007 using CO configuration.

hi
using KEOA1 wont work in this situation as it looks like the cost center accounting is not active in your controling area.
so go to OKKP and activate the cost centre accounting for your controling area and then try again
i am sure this will work
Assign points if useful

Function Area derive from cost center

Hi, here is a question.
The function area was input in the cost center master data. Cost center A ( Function area 1000), Cost center B (Function area 2000)
Then creat a PO with Account Assignment Category(K), Item Category (B), input the cost center A in the PO.
When I do MIRO, I change the cost center (A TO B), but the function is still 1000, not change to 2000. But if I delete the Function area in MIRO first, then change the cost center, the function area update to 2000.
There is no default function area in GL account and cost element, also no substitution.
Is it standard in SAP? I want the Function area can be updated with the cost center. Any method?

Here is what SAP help says about this.
Functional area field for postings - ready for input?
You can enter the functional area directly when entering G/L account postings, provided the "Functional area" field is shown in the field status group of the G/L account.
SAP recommends that you do not show the "Functional area" field in the field status group of the G/L account, but rather that you have the system determine the functional area of the account assignment. This eliminates the risk of the user entering incorrect functional areas.
You said you have functional area in cost center master data. When you post documents, do you get func. area from the cost center automatically or not?

Assign right cost center to PR release strategy

in purchase requisition order type, how to assign cost center for release strategy? i.e. for different release strategy, i want to assign different cost center.

Create a new Charecterstic Using Table CEBAN and KOSTL. Here Select Multiple Entries and Maintain your Values (in Values Tab Maintain all the costcenters you are making use of).
Assign it to class and Continue with your Normal Release Procedure.
Revert any issues.
Thanks,
Shiva

Sales order line item assign to cost center

Hi Experts,
I would like to know how can I assign a cost centre to a line item in a sales order? Currently we are assigning our line items to a profit centre.
Thanks in advance for your help.
Best regards,
Catherine

Dear Catherine,
One way, to assign a cost center to a sales order, is based on Sales Org, Dist Channel, Division and Order Reason code.
T. Code: OVF3, or
Path: SPRO --> IMG --> Sales and Distribution --> Basic Functions --> Account Assignment --> Assign Cost Center
For More, refer -
[Assign a Cost Center manually in a Sales Order|http://www.sap-img.com/sd007.htm]
Best Regards,
Amit.
Note: You must consult with FI-Counterpart, and check with:
T. Code: OKB9
Using this Transaction, you can determine a cost center, from profit center, maintained in to Material Master.

Business Area assignment to cost center

Similar Messages

Maybe you are looking for