Business area is missing in Accounting doc for Taxes

Hi Gurus,
              When I am sseing accounting doc, The business area is not showing for taxes,but its showing only for sales values. Is there any setting for getting Businees area for taxes?.
Regards
Rams

If the Profit Center of material is flowing wrongly in billing or a particular G/L Account is assigned to multiple Business Areas, you will face this type of problem.
So Check whether your profit center is flowing correctly and also the respective G/L Account is not assigned to multiple Business Areas.
In order to avoid this, you should have invoice split based on business area.
thanks
G. Lakshmipathi

Similar Messages

  • Business Area not populating in Accounting Doc Post Division Change

    Hello Friends,
    Platofrm: SAP R/3
    We created a new Divisions (06)  and  assigned them to the Material in Plant 155. A new business arae (PTIC)
    was also created and assigned to sales are 0020 00 06.
    Later we did couple of assignments (Enter Str>Assig>SD>) where we assigned business area to division - Plant - Sales Org
    and Dris Channel ) .
    Now to validate the changes I am posting a Sales order in sales area 0020 00 10 - to see whether the newly created business area is getting populated or not. Post sales order - delivery- goods issue and _accounting doc - in the accounting document
    I dont see the business arae PTIC. Old business area (PTI) is getting populated.
    I wanted to know whether Material is controlling the business area in accounting doc and where I am missing the link.
    Our aim is to see business area PTIC in final accounting document so that we are sure that the material - whom we assigned division -06 is giving business are ptic.
    Please assist and provide suggestions.
    George

    Hi,
    Go to SPRO > Enterprise Controlling > Consolidation > Integration: Preparation for Consolidation > Preparation in the Sender System > Further Settings for Business Area Consolidations > Sales and Distribution
    And check the below settings:-
    - Assign Rules per Sales Area
    - Assign Business Area per Plant and Division
    - Assign Business Area per Sales Area
    Regards,
    SDNer

  • Business area not appearing against VAT entry in Accounting doc for Invoice

    Dear All,
    We have configured Business areas,
    When we post an invoice with multiple line items and open the Accounting document for this invoice we find that Business area is visible against Freight Amount and the ,Sales  A/c but that no business area is appearing against the Vat payable amount in the accounting doc.
    Why so?
    what should we do so that system determines the business area against the VAT Account also.
    Regards,
    Avinash Gyale

    This could be due to two reasons
    1)  If one invoice contains multiple business areas, only blank space will appear in accounting document.  To avoid this, invoice split should happen based on business area.  Invoice split can be done through VOFM data transfer - billing document.
    2)  If a particular G/L Account is assigned in multiple Business Areas, this problem will come and you need to apply Substitution Exit RGGBS000
    thanks
    G. Lakshmipathi

  • Difference between Business area and profit center accounting

    Hi Frnds,
    Can any body explain about difference between business area and profit center accounting .

    Hi
    Business area will have many profit centers. For example Vehicle is a business area in a company. Vehicle can be cars and Bikes etc. Here Vehicle is business area and Cars and Bike are profit centers. In broad Vehicle is a profit center. But as it has sub areas those are profit centers. So profit centers cannot be replaced with business area and vice versa. We can replace business area by Profit centre, only condition is that it should be in same controlling area. The business area is more like a business unit of a company. You can have multiple profit centers within a business area.
    Main distinguish factor is that distribution and assessment in possible in profit center but not in business area.
    One more distinction is that Business area need not be attached to any organisation structure. But profit centres can be created only under the controlling area. Business area can be across controlling area.
    Business area concept is used for making stragic decisions by the management whereas the primary purpose of profit centre accounting is responsibility accounting.
    http://help.sap.com/saphelp_erp2005/helpdata/en/ff/277203deea11d3b5b4006094b9b0a5/frameset.htm

  • Using Business Area and Profit Center Accounting with New GL functionality

    Hello,
    We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    -     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
    -     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you

    Hi Sachin,
    Thank you for the reply, we want to know that
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
    -     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
    -     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you
    Tipu Khan

  • Billing docs are generated but not account docs

    Hi
    Today I got a ticket which says billing docs are generated but not accounting docs. I went to vf05 and found that it is indeed true. accounting doc was not generated for one of the billing doc. How can I what went wrong and how to solve this.
    Will reward suitably. Plz help.
    Thanks

    Hope SD-FI integration is not properly maintained.
    This can be one of the reason. if the problem is related to GL account determination maintain it in VKOA.
    Assign points if useful
    Regards
    Raghu Ram

  • Business area as a req..field for vat input tax g/l

    in fs00 . we  set the additional account assignment for field like suppress req. entry,opt. entry..i want to know for which general ledger it will be required...?
    actually in our system for (vat input tax ) gl  business area it is not mandatory field ...or when i check the line items for this general ledger business area wise ...it displaying for all  business area...
    so tell me if i set it as req. field,then will it be right or not?
    Thanks & Regards
    Rekha Sharma

    Hi,
    To my understanding taxes are always posted without a business area. System makes transfer postings from tax account to business areas for the income and expense account. A balance sheet adjustment is carried out according to business area if 'Business Area Balance sheets' has been activated in company code global parameters(OBY6).
    When you post a document the system determines this document and notes for the adjustment. Documents noted during posting are calculated for the adjustment. The system calculates the adjustment according to the account assignments. Execute F.5D(programSAPF180A) reads the marked documents, calculates the necessary adjustment postings, and updates these in its own database tables. After that execute F.5E(program SAP F180) reads the adjustment posting tables and on this basis posts the accounting documents required.
    For example you posted on customer invoice:
    Customer A/c  Dr 1150(Accts Receivables)
    Revenue A/c1 Cr         600 (BA-1)
    Revenue A/c2 Cr         400 (BA-2)
    Tax A/c Cr                   150
    During the Balance Sheet Adjustment the system divides this tax entry by business area wise
    Tax A/c 90(BA-1)
    Tax A/c 60(BA-2)
    You cannot run balance sheet adjustment without activating the 'Business Area Balance Sheets' at company code global parameters.
    Hope it will clear your query.
    Regards,
    Krishna Kishore

  • Business Area in G/L Account

    Hi frenz,
    In G/L account I need Business Area to be displayed.
    All settings were done.
    Its already working perfectly in a company code.
    But I am not able to get it in other company code.
    I want it in  field status group (G006).
    Business area is maintained as optional.
    When it is working fine in one company code ,
    why not in another?
    kindly help
    Regards,
    Vimal

    Hi,
    You can only link to the business area if you have created one in Customizing for Financial Accounting (FI).
    When creating/changing business entities, you may be required to enter the business area (required field) even although this field has been set as optional in Customizing. In this case, the field status setting is overridden by the "Enable business area balance sheet" in FI. If this field is set in FI Customizing, the business area field has to be filled in for all FI postings.
    For FI postings on Real Estate objects for which there is no business area assignment, the business area is derived from the business entity. Consequently it would not be possible to make automatic postings on Real Estate objects if the business entity has no business area.
    The field status control for the business area field on the business entity only has an effect when the business area balance sheet has been disabled in FI.
    To post items in a business area, enter the business area when you enter the business transaction. However, the business area can also be derived from other account assignments, such as the cost center. To enable the system to do this, you must define the business area in the cost center master record.
    If you enter a cross-company code document, you can post to different business areas across all company codes in one document. As a result, any number of combinations of company code and business area are possible.
    For further details, please refer the following link:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/e5/077a8a4acd11d182b90000e829fbfe/frameset.htm
    I hope it will help.
    If helpful, please assign points.
    Regards,
    Manju

  • Business area in Cenvat clearing Accounts.

    Dear Friends,
    PO is already created. When Miro is done , Business area is entered which is a required field.
    When Miro is simulated,all the GL Accounts have picked up the business area, but cenvat clearing accounts have not picked up the business area.
    Because of this, We are unable to post Miro.
    Please advise how the  cenvat clearing accounts can pickup the business area?
    Regards
    Sridhar

    done through validation.

  • Business area not appearing in Accounting document of 543's materail doc

    Hello ,
    We have created new plant CN06 (and assigend to Company code CN06) by copying existing plant CN03 (assigned to Company code CN03). Business area CN06 was defined and assigned to plant CN06 and valuation area. When we do normal GR document business area appears in material document but when we are doing GR for sub contracting (posting key 81) with movement type 543 Business area doesnt appear in the material doc .
    In cancellation of Subcontracting material document for plant CN06(Movement type 544) Business area appears properly . We are unable to analyse the issue.
    We have checked field status through RM07CUFA program , there wn't be any mismatch.  Please required your help.
    Regards
    Mahesh Naik

    Hello ,
    We have checked
    please check the for the sales area have u assigned rule (2 or 1) or not in t-code OVF2.----- Rule assigned is -1
    please check business area is assigned to plant & division in t-code OVF0----correct assignment is there
    please check assignment of business area to sales area OVF1.--correct assignment is there .
    Still we are facing problem.
    Regards
    Mahesh Naik

  • Validation code for business area and cenvat clearing accounts

    Dear Friends,
    In order to prevent the users from entering the wrong business area in the correct company code, I have written the validation as below.
    Prerequisite : BSEG-BUKRS = '1000'
    Check :  BSEG-GSBER = 'ABC' OR
          BSEG-GSBER = 'DEF' OR
          BSEG-GSBER = 'GHI' OR
          BSEG-GSBER = 'JKL'
    Message : E - 023 - Please Check the Business Area.
         While trying to post Miro, cenvat clearing accounts is not picking up business area and giving an error "Please check business area" ,
    I want the validation rule  not to consider or evade the cenvat clearing accounts and post the miro.
    The user is also making another mistake. Ex: in the debit he should enter ABC(Business area) and in Credit also he should enter ABC (Business area). He is wrongly entering GHI which is affecting the trial balance.
    Please suggest what changes to be done to the validation.
    Regards
    Sridhar

    the issue is closed

  • Unable to generate accounting docs for invoice.

    hi all,
    I have a delivery related  billing invoice created in May 2010 that we're attempting to cancel.  We created a MIRO invoice against a sales generated PO tied to the Sales order for the invoice.
    Subsequently, in August, we determined that we needed to cancel the MIRO invoice, and discovered it's necessary to reverse the sales order Invoice first (subsequent docs.)
    In attempting to cancel the SD billing document, we received several error messages that prevented the creation of the invoice.  We were eventually able to create the invoice by changing the billing date to the current date (from the defaulted may date) and things got interesting.
    We created a SD cancellation invoice in Aug  but were not able to generate accounting docs
    I thought that if we updated the billing date to this month we would be able to process.   So updating the billing date to 09-13-2010 (today) I receive this error
    System error in the FI interface
    If we modify to any date before September, we receive the following error message, which we expect, since we've closed prior period.
    Posting period MMM YYYY is not open  (billing dates attempted - 07-31-2010, 08-05-2010, 8-31-2010)
    If i process using a september date, the changd date is not retained.  only non september dates (also attempted 10-1-2010) are retained.  This leads me to believe that there's an issue that's outside of the billing date causing the problem.
    Can someone provide some input on how to properly address this invoice and allow it to generate accounting documents?

    You could be encounrtering related FI errors. Release your billing document in VFX3 and refer to the details in the error logs.

  • Business Area not visible to account with admin privileges

    Hello,
    I've encountered the following scenario on visiting a client site:
    A Business area has been created by the EUL owner account (IFL) and he has granted admin privileges to another account (BRIANB who has been granted the DBA role). However, when BRIANB logs onto DIscoverer Admin, the Business area in question is not visible. BRIANB is able to create a new business area in the EUL which includes folders that are part of the 'invisible' BA. BRIANB is not able to access the 'invisible' BA using Discoverer End User. I'd be very grateful if anyone out there has an explantion for this,
    regards,
    KEvin.

    Problem solved. My client inadvertently created an additional EUL when initially logging onto Disco Admin as BRIANB. Thereafter this was the default EUL. The errant EUL has now been deleted the required BA's are now in view,
    Kevin.

  • Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

    Hi All,
    When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset. 
    When I see the FI document display, the fields Cost Center and Plant are blank.  Business Area and Profit Center fields are getting updated.
    Can any one help me how to get this Plant and Cost Center in the posted document.  Is there any OSS notes for this.  I am using ECC 6.0 version.
    Thanks in advance for your help.
    Regards,
    Rajesh

    Rajesh
    Aditional on me answer.
    The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
    Steps
    Click on Simulate, than you see the posting screen:
    Click on the line (pk 40)
    Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
    An other option is to make a substitution to get this information

  • Change Business Area  to Profit Center Accounting

    Hi Gurus,
    Here we want to elminate business area and migrate to profit center accounting, could anybody highlight what are the important steps for the changes.
    Thanks in advance.
    Regards,
    Kick

    Did you activate Business area?

Maybe you are looking for