Business Area is not flowing to Billing Doc Line item

Hi,
Since recently we have observed that in some billing document creation, the business area in sales order line item is not flowing to the billing document line item.
VBRP-GSBER remains blank due to which we face problem in J1IIN txn.
This is not happening in all the cases. There are very few instances where business area is becoming blank in billing document line item.
But when the same billing document is reversed and new billing document is created, the business area flows properly to billing document line item (in VBRP).
Can anybody suggest why such erratic behaviour? And how to resolve the issue?
Thanks and Regards
Ratna

Dear Shiva Ram and Srinath,
Thanks for your reply
I had checked the settings in SPRO. These are OK. The sales order line item is deriving business area properly. But in some cases (not in all the cases) the business area is not flowing to Billing Line Item during billing document creation. It is happening in production server and not in development server.
I intend to use user exit userexit_fill_vbrk_vbrp to fill the VBRP-GSBER col with VBAK-GSBER if VBRP-GSBER is blank during saving the sales bill thro VF01..
Pl. suggest.
Regards
Ratna

Similar Messages

Details from Billing doc line item in COPA

Hi,
We are posting billing docs with multiple ship-to parties on the different line items. In COPA I need to get hold of the ship-to party. There are no sales orders created in the process.
In neither the derivations (KEDR) nor in the user-exit am I able to get hold of the billing doc line item nr, as that is what I need to determine the ship-to party from the VBRP table.
Any ideas on how I can pick up the ship-to party from the billing doc?
Thanks in advance
Piet Strydom

HI,
Thanks for your response.
Yes, we have ship-to party at the line-item level. Technically it is stored on VBPA, but the access into VBPA is the billing doc and line item number.
I have not been able to find good (SAP) documentation for exit COPA0005, but what I did find warned against changing characteristics? That should be done in COPA0001. However, the RBELN and RPOSN fields are not populated yet.

How to grey out the Account Assignment Group Fld in Billing Doc Line Item

Hi SD Guru's
I have a small doubt.
I have maintained account assignment group in material master. Now when i create an order , the account assignment group gets picked from material master into this sales order.
Now i go to VF01 for doing the invoicing.
Now i can still go to billing document line item against the material and change its account assignment group before raising the invoice. When i change this field, i can still post to accounts.
I want to know is there any way in which we can restrict the way in which this field is greyed out and is made non-editable, so that only correct entries with account assignment group maintained in material master are posted.
Answers will be appreciated.
Kind Regards
Ravi

Hi,
Sandeep can you please give me step by step process of using SHD0 in this case.
Now if i apply this to transaction VF01 and VF02, would it apply for all billing document types? I dont want that, i want it to work for a specific billing type
Kind Regards
Ravi

Changing condition type values in Billing Doc Line Items

Hi All,
I want to change the value of condition types JLST and JCST to zero in the line items of proforma invoices. How can I do this?
Any function module or BAPI? Should I go for BDC?? I tried to find user exits. What can be the optimal way to do this?
Please help.
Thanks in Advance
- Neha.

Hi Neha,
You pass 0 (zero) to the field COND_VALUE in CONDITIONSIN table alongwith other relevant data.
And pass 'X' to the field COND_VALUE in CONDITIONSINX.
hope it helps.
saroj

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

Business area is not reflecting in A/c doc

Hi
After creating the sales invoice when accounting doc is generated i can only see the business are for customer line account and sales receivable a/c, but for other accounts like service tax, edu cess, higher edu cess business area is not picking.(in FB03). In configuration we have assigned bus area to plant and division wise.
Where to configure so that Bus Area shouls reflect in all line items in FB02.
Regards
Debasish

Dear Laxmipati
Thanks for the reply.But we maintain only one business area for one invoice as it is a service related invoice and the invoice line item is always one.So there is no case of multiple bus area.
Plz guide.......
Regards
debasish

SD billing Accounting document Profit center not coming from billing doc

Hi Expert,
    I have stuck with the accounting doc entries. Issue is that accounting document should have
    the same profit center as billing document. Actually i have created profit center for my each of
    my divisions and want the same profit center whenever that particular division is selected. But it
   is not working.
    I have tried with substitution method also by t-codes 0KEL and 0KEM. It works correctly till
   billing document means division wise profit center is coming in order,delivery , and billing but
   when we check accounting document,Profit center doc. Controlling Document and Profitab.
   Analysis in Delivery and Bill it is coming from what i have maintained in material master.
   But it should come from what is in the delivery and billing document.
    Please share your ideas.
   Thanks & Regards

Hi SAP Consultant
I would not agree with the first reply above.
When you define a substitution in 0KEL and 0KES, it is intended to overwrite the PC from Material Master. It is a wrong notion that this Substitution will only impact FI, and not CO / COPA
1. Are you able to see the over-written PC in Sales Order? (I think YES)
2. Are you able to see the over-written PC in Billing doc? (I think YES)
3. If in FI doc you are not able to see that, then see where is the problem. Probable reasons would be a Substitution written in OBBH, You are having a CO Object in the line item, a user exit written in the exit SDVFX008
Ask your ABAP to check on these lines, if 1 and 2 is YES
Br, Ajay M

Business Area is not getting updated in "Main Bank Account" Line item (FF_5

Hi Gurus,
I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
Rgds,
Prasad.

Hi,
1. In case of Business where payments are made centrally it is important to report
    Bank A/c Business area wise.
2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
3. I am however getting one error while doing the upload in FF_5. The error occurs
   only if Business Area is a "required" field in Bank Account's "Field Status
   Group".
   Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
   But if I make Business Area as an Optional Field I am not getting an error and
   also the posting is done to Main Bank Account.
Is there anyother method by which this error can be corrected.
I have assigned 2 points for your inputs. Can you help me to solve this error as well.
Rgds
Prasad

Business area is not appearing in the FBL1N

Hello Experts,
Please give me your valuable suggestions for below issue.
Business area is not appearing for few transactions for particular vendor in TC: FBL1N, We are using Ecc 6.0. Please advice.
Thanks,
Ratnam V

Please review note 549182 FAQ: Business Area Accounting
in particular see point 3.
3. Question:
With customer and vendor items, why can you not enter a business area?
Answer:
Open items are assigned to business areas depending on the expense and
revenue items of the invoice.
Because of this dependency, open items can be assigned to several
business areas. Thus the assignment is no longer unique. There is a
function available in the balance sheet adjustment that enables a
subsequent assignment.
With a unique dependency, the business area is copied into the open
items not assigned to a business area during the posting of the
document.
Also consider SAP Note 41294 in this context.

Business Area is not visible

I have Discoverer 10g 9.0.4. The EUL is visible by a couple of accounts. Of the accounts that can see the Business Area, I can revoke the BA and it disappears from the user. I can then grant it back to the user and it is visible again.
With a new database account with the same database permissions as the other accounts, the business area is not visible. I can log in with one of the "bad" accounts I can see the EUL5 tables. I can see that in EUL5_ACCESS_PRIVS and EUL5_EUL_USERS these accounts should be able to see the business area but no matter what I do in Admin, nothing is visible. What am I missing?
I've even tried granting select on all EUL5 tables to public but that did nothing. I tried granting administrator access to these accounts but that didn't make the BA visible either.
I tried another desktop with Discoverer Administrator installed and tried granting/revoking access to these accounts but that didn't help either.
HELP! :)

I did the following as a test:
create user test_disco identified by test_disco default tablespace tools temporary tablespace temp;
grant connect to test_disco;
grant dba to test_disco;
-- Next, use Discoverer Administrator and grant access to the BA
-- Next logon as TEST_DISCO and run the select statement:
select b.ba_name
from EULOWNER.eul5_eul_users u,
EULOWNER.eul5_bas b,
EULOWNER.eul5_access_privs p
where u.eu_id = p.ap_eu_id
and b.ba_id = p.gba_ba_id
and u.eu_username = user
-- one row returned
-- Next, connect with Discoverer Desktop or Discoverer Plus as TEST_DISCO and unable to see any Business Areas.
What is going on?

Business Area is not pulling for Balance Sheet Accounts

Hi,
For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
Kindly Help me..
Thanks
Sunil

Hi,
in OMJ7, assignement were there properly. Still why i am not able to pull Business area for Balance Sheet Accounts.
I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
This is my problem...
Thanks
Sunil

Business area is not being specified in cost center master.

Hello Professional friends,
When i specify Business area in existing cost center master data, it appears an error massage - "Field change Business Area is not possible (transaction data already exists)"
I tried to change the validity by analysis Period, when i do this, it appears anothe error " No further processing (contact your system administrator)"
Its user critical requirement that he want to specify business for all new and existing cost center.
there is no problem with new cost center.
Waiting for valuable suggestion.

Hello,
The rule is that if you make any actual or planned date within the current year, you cannot make any changes to any of the organizational units within the cost center master.
From the next year, you can remove / change the business are within the cost center master, provided:
You have to change the validity period of the cost center master by doing:
Go to KS02
Edit ==> Analysis Period
put your cursor on the valid from e.g. 01.01.1900 and click F5 (the line gets selected and become blue)
Click on Other Analysis period and then change the analysis period. The new analysis period must be starting with the first date of the next fiscal year.
Now change or remove the business area.
For this year, surely you cannot change the business area, since there postings.
Do not try to write any ABAP program to change the standard in order avoid the business area change error, it would end up data inconsistencies.
Thanks,
Ravi

Error: Regarding Business area in not assigned to cost center

Hi Expert,
while saving the WBS , getting error message that business area is not valid for this cost center, even after mapping business area in to cost center in KS03. still getting this error. and check all cobination between business area and cost center is correct..please guide some one how to correct it.

Hi
CrossCheck in OKB9 Account Assignments -Detail per Businessarea/Val.area - check for the cost center to which Val.area it is assigned. change it as Per your requirments.
this will solve your issue.
Thanks
Goutam

Business Area Field not Update in VF02 for output tex

Hello All,
in vf02 transaction the business area is not populating in case of output tex,i already search the relavent document in sdn but its not working,i impliment the exit userexit EXIT_SAPLV60B_006 (member of enhancement SDVFX006). as referance of http://scn.sap.com/thread/3146034,but my exit is not at all triger i check all the things like the project is already activated and i also thing that we need to fiel the bseg-table for tha i wrote the code also, as refer to
http://scn.sap.com/thread/3164333,please suggest to resolve this issue. in note SAP Note 199886 it say its a stnd.behv .
THANKS,
Sam

Hi,
iam not sure how it can be checked but in FS00 you can compare both GL Accounts at - control in chart of accounts whether it is p& l account or Balance sheet account
also check the field status group
if you can compare both GL accounts you will get the answer
If you are doing sales order check whether the Business area is appaering in the order
iam sorry business area does not come from material master,profit centre comes from material master

MIGO ERROR:- 10020 ORD belong to business area 1111 not 1112

Hi All,
I am facing an error while doing MIGO for an import PO. Error is below:-
10020 ORD belong to business area 1111 not 1112
Message no. KI188
Diagnosis
Account assignment object 10020, type ORD is assigned to business area 1111. You made an explicit assignment to business area 1112.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area 1111. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area 1112.
Change the assignment of 10020 to business area 1111. Note the document number and continue processing the document after changing the assignment.
Interesting thing is that when doing MIGO in Dec 2010 not getting any error but when doing in Jan 2011 getting above error.
Pls help
rgds
Awnindra

Hi Dear,
I feel that I have seen this problem before, can you please try to change the Controllin area in the SAP and then proceed with the T-Code.
It might solve your problem..
Regards,
Yawar khan

Business Area is not flowing to Billing Doc Line item

Similar Messages

Maybe you are looking for