Business Area missing

Hi,
I need your guidance. I have run Automatic Payment Program. Clearing Document been generated. Now when i need to cancel the same I am getting error Business Area is missing. Client is having validation as no document get posted without Business Area. Please send your valuable suggestion.

Please check whether in the original document generated from payment run the business area was entered?
If not, you should configure the business area in FBZP > Bank Selection > Bank Account
After this setting it will not make issue in reversal in future.
But for the current document to be reversed, you can define a substitution for populating the business area.
Regards,
SDNer

Similar Messages

  • A/c doc not created and error msg "Business Area Miss-Match Check input"

    Hi,
    After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
    Regards,
    Sohail

    Dear Sohail Rahman,
    Looks like the Business area has not been properly assigned.
    Business area can be created for three combinations:
    1. Business area by sales area
    2. Business area by plant and division
    3. Business area by plant and item division
    In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
    Hope this helps
    Thanks
    Murtuza

  • Business Area missing in MIRO

    Hi all,
    I am facing problem with business area in MIRO. when I check MIRO for a PO and click on follow-on documents then it shows business area for few items but for some items its missing, please help me to solve the problem
    rgds,
    Shweta

    Hi Shweta,
    I cannot get the details of FS00 as mentioned by you as I am not linked to your server now.
    The GR/IR Clearing account is a centralized clearing and reconciliation account which works like a bridge
    which is getting debited on procurement and reversed during MIRO and is not linked to any Business Area.
    It is a Balance Sheet account which reveals the nature of goods received by your Plant whatever may be
    the storage location.  If the inventory account is there, it will show for which business area you have
    purchased.  During MIRO the GR/IR account becomes nil and it is an automatic internal posting through OBYC
    assignment. The other accounts will be vendor account which may carry BA classifications.  Hope you are clear.
    Best Regards,
    Sadashivan

  • Business Area Missing in Settling to Gl

    Hi,
    Business Area is missing while settling  order to Gl. in Ko88. I had given validation for Gl, it was working we are able to go order(ko02) & insert Business area in settlement rule for new order. But there is a problem with Partially settled orders , in settlement rule the Business area position is greyed.
    Pl. provide the solution at the earliest, how to go about in settling the old orders with Business area.
    Regards,
    Surya Maddula

    Hi Shweta,
    I cannot get the details of FS00 as mentioned by you as I am not linked to your server now.
    The GR/IR Clearing account is a centralized clearing and reconciliation account which works like a bridge
    which is getting debited on procurement and reversed during MIRO and is not linked to any Business Area.
    It is a Balance Sheet account which reveals the nature of goods received by your Plant whatever may be
    the storage location.  If the inventory account is there, it will show for which business area you have
    purchased.  During MIRO the GR/IR account becomes nil and it is an automatic internal posting through OBYC
    assignment. The other accounts will be vendor account which may carry BA classifications.  Hope you are clear.
    Best Regards,
    Sadashivan

  • Business area missing in documents

    Hi
    I have few documents which are posted with out Business Area is there any solution, other than reversing the document and post, hence these documents are belong to previous year.
    Regards,
    Bhaskar

    Hello,
    There is no way that you can update business area.
    If it is really critical situation to update business areas,
    go to SE16N
    enter the table
    in transaction bar enter &sap_edit
    enter
    debugging mode gets started
    then execute.
    Edit the table (be cautious)
    Note that you are NOT doing this in production.
    Regards,
    Ravi

  • In Business workflow outbox 2 days messages are missed

    Hi All
    In Business workflow outbox 2 days messages are missed, i.e in the entire January 12th and 13th dates only
    what might the problem and how to solve this please help me
    Thanks in advance
    Jaya Naidu

    First, have him go to Mail>Preferences>Accounts
    Then have him locate his account and your account on the left.
    Have him click and drag the .mac account below his account in the list.
    This will solve the default setting of mail going out from your account when he clicks on the Inbox.
    Removing the smtp server for .mac may not even work for him, especially if the account is active.
    Instead click on "advanced" and there should be a check box for "enable this account", deselect the box. This disables the account without deleting any mail.

  • Reg.Business area data missed in our report S_ALR_87013104

    Dear Experts
    We are using the report " S_ALR_87013104 " in which business area data is missed. So we cann't get the correct expensed data. Pls help.
    Thanks
    Rajakumar.K

    Dear Experts
    We are using the report " S_ALR_87013104 " in which business area data is missed. So we cann't get the correct expensed data. Pls help.
    We want a report "if we give the sale order all business area cost incurred should come".
    in the above scenario business area for "Embroidery exp" does not come in the report S_ALR_87013104. Pls help
    Thanks
    Rajakumar.K

  • Missing business area in FG line item

    Hi All,
    We are starting a new company code that implements business areas. We've linked the business areas to our plants and division and also configured that the sales area picks up the business area from our plants and division. However, when we post outbound delivery through VL01N, the line item for Finished Goods account (in FI doc) does not get the business area. When we check the COS account, it has a business area. Only the FG account doesn't. Isn't it supposed to be automatically derived? Please advice what may be the cause of this and what we can do so that the FG line item would get the same BA. Thank you!

    Hi,
    Please check SD-FI: missing Business Area (GSBER) in the customer line item
    BR

  • Business Partner Creation/Display - General Data fields are missing

    Hi,
    We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

    I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
    Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
    If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

  • Balancing Field "Business Area" is missing

    Hi Gurus,
           I created a New Company Code,Plant,Sloc and Created Master Datas.I Did the PR and PO.When i tried to do MIGO-Goods Receipt,the system is throwing an error "Balancing field "Business Area" in line item 001 not filled".
           Let me know the missing configs to overcome this error.Expecting your replies soon.thanks in advance.
    Happy Learning,
    Nambi.N

    please check your material master record.
    I think some fields are missing or incorrect in pucrhasing or account view...please check that and do MIGO
    Enjoyyyy
    Akshit

  • Business area is missing in Accounting doc for Taxes

    Hi Gurus,
                  When I am sseing accounting doc, The business area is not showing for taxes,but its showing only for sales values. Is there any setting for getting Businees area for taxes?.
    Regards
    Rams

    If the Profit Center of material is flowing wrongly in billing or a particular G/L Account is assigned to multiple Business Areas, you will face this type of problem.
    So Check whether your profit center is flowing correctly and also the respective G/L Account is not assigned to multiple Business Areas.
    In order to avoid this, you should have invoice split based on business area.
    thanks
    G. Lakshmipathi

  • "Check Business Area of the company code" error while posting stock

    Hi Experts,
    While posting stock to a storage location of a plant , the system is giving me the following error message :
    "Check Business Area of the company code" .
    Would highly appreciate if I could get some info for this error message and how to resolve the same.
    Thanks & regards
    Vikas Hali

    hi
    i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
    then post the stock
    regards
    vijay

  • SPM Transformation and Routine are missing in Delivered

    Hi All,
            During the transport(From Devlopment to Quality) we received an error message as 'Transformation and Routine are not available in A Version'. Hence the transport has got failed.
    I tried searching this Object(DSO - 0ASA_DS00) in RSOR - Business content, but all these objects are missing in the Delivered content itself. The Object and System details are as follows,
    Object : DSO - 0ASA_DS00
                 TRFN - The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
                 TRFN - The TRFN 0MM70WOQSHKX3SSQEDTOL7UAK90H15G8 is available in Delivered content, but the corresponding Routine is not available in delivered content
                 TRFN - The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
    SAP_ABA          701          0008     SAPKA70108
    SAP_BASIS                          701          0008     SAPKB70108
    PI_BASIS                           701          0008     SAPK-70108INPIBASIS
    ST-PI                                  2008_1_700                                                0003     SAPKITLRD3
    SAP_BW          701          0008     SAPKW70108
    ANAXSA          210          0005     SAPK-21005INANAXSA
    BI_CONT          704          0009     SAPK-70409INBICONT
    OPMFND          210          0005     SAPK-21005INOPMFND
    ST-A/PI          01M_BCO700     0001     SAPKITAB7F
    When I tried collecting object (DSO - 0ASA_DS00) with 'Only necessary object', I am not facing this error, but with 'In DataFlow before & After', we are facing this issue.
    We also found 3 objects (TRFN's & Routines) are missing for PO & Invoice Process chains in the delivered content itself.
    We need to transport this object at the earliest, can anyone please guide me, how to proceed on this?
    Thanks..
    Regards
    Santhosh Kumar N

    Hi Rajesh,
                Thanks for the guidance. I have checked the TRFN's & Routines in the Business content, but they are missing in the Delivered Version itself.
    When we tried transporting the Spend Process chains for PO & Invoices, we are facing this issue.
    Please let me know, if we need exclude this missing objects and start transporting Or Is there any other options to get these missing objects in?
    Please find below the missing object details,
    1. The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
    2. The TRFN 0MM70WOQSHKX3SSQEDTOL7UAK90H15G8 is available in Delivered content, but the corresponding Routine is not available in delivered content.
    3. The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content.
    4. The Object '8CXV3JV4FQR295IVBCHN69QBU' of type 'Routine' is not available in Delivered content.
    Thanks
    Regards
    Santhosh Kumar N

  • How to Define Workbook / Business Ares Security Correctly for new Users

    Hi All,
    Please could you help me understand the Security Model for Workbooks and business Areas as I believe I am very close to understanding it, but missing something important.
    Background Information:
    We are using the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger) to build our reports on. These are the steps I am taking to try and assign a new user & responsibility access to the existing report.
    1. I create the Report in Discoverer Desktop under the ‘General Ledger Responsibility’ logged in as myself – assume report name = ‘Report_1’.
    2. I create a new Responsibility in Oracle Apps called ‘Discoverer Resource Coordinators’.
    3. I create a new User in Oracle Apps called ‘Joe Bloggs’ and assign the responsibility ‘Discoverer Resource Coordinators’ to the Joe.
    4. Logged in as myself in Discoverer Desktop, Responsibility ‘General Ledger’ I Share the Report (Report_1) to the new Responsibility I just created ‘Discoverer Resource Coordinators’.
    5. In Discoverer Administration, Security, I assign the new Responsibility ‘Discoverer Resource Coordinators’ to the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger).
    6. In Discoverer Administration I set privileges so that the Responsibility ‘Discoverer Resource Coordinators’ can do all tasks, query data, administer. .etc. etc..
    7. I therefore believe everything has been done and attempt to Login and run the report under Joe Bloggs, but am unable to retrieve any data.
    Help… what am I missing!
    Thanks,
    Lance
    Message was edited by:
    Lance

    Dear All,
    This has now been adjusted according to your recommendations but to no avail.
    Myself and Lance have ensured that this new responsibility has unlimited access to all the existing Business areas to eliminate joins within folders not being recognised, we have also ensured that the workbooks that have been created are shared with the correct responsibility.
    I have thoroughly tested this set up by logging in as this new responsibility within Disco. Client to try and retrieve data in a new Workbook, but even for the simplest of queries this fails.
    It seems that there may be a problem with the Responsibility linking to the EUL, could this be due to the new responsibility being created after the Current EUL was set up?
    Does anyone have any information or knowledge where this could happen?
    Regards
    Si

  • Loading assemblies using Reflection when dependant dlls are missing.

    Hello All,
    I've created a sample WinForms application where I upload a dll (present in my local machine).
    I just need to read the public types (classes) defined in the assembly. So I've used the ExportedTypes property.
    When the dependant dlls are present in my machine, I'm able to read the public types of the assembly using the ExportedTypes property.But when the dependant dlls are not available in my machine, I get the following error:
    "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."
    Please let me know how to overcome this problem even when the dependant dlls are missing.
    NOTE: When the same dll, is looked upon using  ILDASM.exe we are able to view its classes, even when the dependant dlls are not present.
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

    Hi Darin,
    Thanks again.!!
    I'm having trouble reading a COM dll.
    I'm using following code  and using the LoadTypeLib method to fetch the dlls ITypeLib.
    [DllImport("oleaut32.dll", CharSet = CharSet.Unicode, PreserveSig = false)]
            static extern ITypeLib LoadTypeLib(string szFile);
    I'm able to get the classes/ProgIds. But I need to fetch only those classes which implement a particular interface. I tried using the following code to fetch the implemented interface, but its not successful for the case where multiple classes implementing
    that interface
    var typeLibrary = LoadTypeLib(openFileDialog1.FileName);
    int typeCount = typeLibrary.GetTypeInfoCount();
    for (int i = 0; i < typeCount; i++)
    System.Runtime.InteropServices.ComTypes.TYPEKIND TKind;
    System.Runtime.InteropServices.ComTypes.IMPLTYPEFLAGS implInterface;
    typeLibrary.GetTypeInfoType(i, out TKind);
    if (TKind == System.Runtime.InteropServices.ComTypes.TYPEKIND.TKIND_COCLASS)
    Type objType = typeLibrary.GetType();
    Type objInterface = objType.GetInterface("IMyInterface", true);
    try
     obj.GetImplTypeFlags(i, out Interfa);
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

Maybe you are looking for