Business area not determined for line item?

Hello All,
I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
Is there anything else need to be done? Do we have to define or assign the business area in material master?
I would appreciate if somebody can answer.
Thanks.

There are three rules for determining a business area:
o   Rule 1: plant and division
o   Rule 2: for each sales area
o   Rule 3: for each plant and item division
See what you are missing

Similar Messages

GL display for inventory account which are not defined as line item display

Hi All,
We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
Can we get the report in MM module line items wise display.
Regards
Prashant P. Zinge

Hello,
You should use RFSEPA01 program via execute SE38 transaction.
This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
Regards,
Burak

GR of Delivery completed item not possible for line item of PO/SA ?

Hi,
Am unable to Receive Goods in MIGO an Error - "GR of delivery completed item not possible for line item of PO/SA"?
Regards
Mohammed Khaja Pasha
+919550917395.

Hi Mohammed Khaja Pasha ;
Delivery Completed checkbox provides a lot of fonctionality like an additional delivery is not expected, but is possible. If you prevent posting of migo , you can benefit from system messages M7 163 and 254.
You want to ensure that the delivery is made before the planned delivery date : Set message 254.
You want to ensure last possible delivery date : Set message 163.
However ;
The open PO quantity of the PO item equals zero.
The PO item is no longer relevant for materials planning.
The PO item is ignored when letters urging delivery of overdue goods are generated.
The PO item can be deleted and archived.
You can specify whether the Delivery Completed checkbox is to be selected automatically.
Regards.
M.Ozgur Unal

Business Area wise Vendor & Customer Line item report

Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
Debojyoti

Hi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar

Business Area in MIRO Vendor Line Item

Dear All,
We want to change the business area in the Vendor Line item of the MIRO. Please help us know how this can be done.
Thanks.
Arpita

Hi ,
We can change the filed in posted document throgh below way,
For that go to OB32 and give a document change rule and save it for that field.
Next you can change the document business ares after posting a document - use Tcode FB03 (select the document) and go to line item display. There click on the pencil icon (change line items) and then in the tool bar from Go To -> click document header. You will find document header or line tem .There business area is in edit mode.
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

Business area not defaulted for tax line via OKC9 or OBBH

Hi SAP gurus,
I had created subsitution rule in both FI and CO, OBBH and OKC9, which did not to default business area into the tax line.
In OBBH, it was overwritten by SAP standard to blank during debug, OSS explains that due to integration with other sub modules, it does not allow. In OKC9, since tax is balance sheet account, it does not work.
I had also tick "business area financial statement" in global parameter setting.
Could any gurus advise ?
Reagrds,
Soo Wan

Dear Eric,
Please help, I have the same problem;
For transaction FAGL_FC_VAL foreign currency valuation new journal entries are generated for foreign exchange profit/ loss, it is done in batch proces but while executing batch it is asking foe cost element to be updated, i have fixed cost center in OKB9 for Business Area ( but i am having two cost centers for two business area for single cost element ie GL- Forex Gain/ loss.
I need tp put Business area manually for each line item while running the batch.
We are in ECC 6.0
I want to develope Substitution, please advice
Substitution for FI ????
Substitution for Co????
you can communicate me on neeleshpitaleattherateyahoodotcodotin or neeleshpitaleattherategmaildotcom
Your help in this will be highly appreciated,
Thanks,
Nilesh

Business Area postings in Tax line items

Hi Experts,
As we know that Business Area is not updated in the tax line items, In one our company code we have done BA adjustment through F.5D and F.5E in 2007, after that there are thousands of line items in the system without business areas, now my client wants a tallied business area trial balance from 2007 onwards or aleast to ensure that the tax line items should get business area assignments from hereafter, and also recently we have created one more company code, Please help how do I ensure that all the tax line items and items with blank business areas get the business area postings. Is there any user exit or any work around available for this... At present we have only one GL for Inter business area clearing for all types of accounts (reconciliation, tax accounts) in OBXM.
Please help...
Regards,
Khan

Hello,
Are NewGL and document splitting active in your system? If yes, you should solve this problem with using splitting function.
Otherwise, you can use business transaction event 00001120.
I explained step by step how can you activate BTE 00001120. I give you message below.
Re: FBCJ - Cash Journal Transaction
In this exit, you must update t_bsegsub-gsber field which t_bseg-buzid = 'T' for tax item.
But you can not split tax line items in this exit. For example in invoice you have 2 or more business area, but tax line item doesn't create for each buiness area (If you don't use document splitting functon). So in this exit you can only assign a business area to tax line item which is automatically generate while posting FI document.
Regards,
Burak

Business area not defaulted for tax line item

Hello Friends,
I am posting Customer invoice, when I simulate the invoice that time Output tax is automatically calculating the tax. My problem is, in the Output tax line item business area is required field which is appearing in display mode.
T code - OBXM. Here we will configure this and at the month end we will run the following transactions.
F.5D, F.5E.
I want to know step by step cinformation for this. If you have any documentation send it to [email protected]
Rams.N
Points will be assigned for the right answer

hi,
If you are using business area method then you want to create all sales tax GL with business area optional. And You create one GL like Tax clearing account(business area optional)and assign the same in OBXM against all the sales tax GLs.
Then you want to run F.5d and F.5e on everymonth.
govind.

Business area field blank during line items display

hiii...
In our system vat input tax gl n cenvat clg a/c gl enries r not showing business area wise... when i check the line items of these general ledgers the business area field is blank...the problem is tha how i can identify the data for different business area...?when i m doing entries by miro in these gl business area field is showing blank...n when i m doing entries by other t.codes these gl line items r showing by business area wise...what the solution for this problem?documnt splitting is also activated in our system....
Thanks & Regards
Rekha Sharma

Hi,
1. Identify the document type being used for the posting. For example KZ or ZP
2. Identify the transaction type and business variant being used for the document type found in step 1 from SPRO node " Classify Document Types for Document splitting" (SIMG_GLT0_T8G12). Most likely it would be
3. Identify the document splitting method being used in your implementation from SPRO node "Activate Document Splitting" (SIMG_FAGL_ACTIV_SPLI) . Most likely to be 0000000012 or 0000000012
4. Go to the SPRO node "Define Document Splitting Rule" (FISL_PS_GBEB_SPLT_DC) and locate the header item with Splitting Method, Business Transaction and Transaction Variant identifies in step 1,2 and 3.
5. Add item category which contains your tax accounts , into the "Item categories to be edited" list for the header selected in step 4.
6. Add "Base item categories "03000 - Vendor" for item category identified in step 4.
Hope it helps.
Regards
Sachin

Business area Not coming for CST /VAT account

Hi,
I am using Business area wise financial statements.System fetches business area for gl accounts except CST /VAT accounts as per the configuration.
Can this be solved through by running the program SAPF180?
i do not know how to do this .
GURU

Before using substitution, refer Note 199886. Think about all possibilities and then you decide.
BSEG-GSBER field for call point 9 (Line item) is not available for substitution. However substitution is possible but tricky.
Good luck.
PP

Business area not Flowing for GL

Dear Guru's
As per Our Client Requirment We Have activated Document Splitting And New GL Concept Based On Business Area (Plant and Division) Concept
In FB03 We are Able to See Entry View and General Ledger View with respect to Business Area. However while posting entries with Output tax system is not able To capture Business area with Output Tax.
Entry as Follows
Output Tax -CR (Without Business Area )
Customer -DR (Business Area Available )
Domestic Revenue/Foreign Revenue -CR(Business Area Available )

Hello Kiran,
It is hardcoded that Business Area is never passed to tax line.
This is standard behaviour, documented in note 199886.
If you want to get a different behaviour, then you could use the
userexit EXIT_SAPLV60B_006 (member of enhancement SDVFX006).
In form ACCOUNTING_TAX_LINE in program LV60BF00 there are these lines:
    MOVE-CORRESPONDING xvbrp TO xaccit.    (1)
CLEAR xaccit-gsber.                      (2)
    CALL CUSTOMER-FUNCTION '006'           (3)
       EXPORTING
          xaccit = xaccit
          vbrk = vbrk
          xvbrp = xvbrp
          xkomv = xkomv
       IMPORTING
          xaccit = xaccit.
In line (1) the business area is copied from item billing field
XVBRP-GSBER into the SD-FI interface field XACCIT-GSBER (togheter
with all the fields having same name)
In line (2) the field XACCIT-GSBER is cleared.
In line (3) the userexit EXIT_SAPLV60B_006 is called where in you can do the coding for obtaining the required behaviour.
Regards,
Raghavendra

Business Area not determined in batch posting.

Dear SAP experts,
My client is on 4.6c system. Till now they were not using business area. Recently we have activated business area balance sheet. While posting FI document manually using FB01, business area derivation happens correctly on vendor/customer/balance sheet line items. However, when same document is posted via bdc session, business area derivation is not happening. I also tried to manually simulate bdc session. Still no derivation happened. Any suggestion/solution will be highly appreciated.
Unit.

Hi Jayesh,
How system is deriving business area in case of vendor/customer when you are doing FB01. Means its through some substitution rule or some default value.
Regards,
Ankit Agarwal

Service Orders gets saved but text at item level are not saved for all item

Hi All,
We have configured service order scenario. The service order gets saved in GUI and in WebUI. But we are facing issue that not all the text entered at item level are getting saved.
Example if we maintained text for 4 line items and save the SO.
We open the saved SO, we get only 3 line items with proper text
one of the line item text is not getting saved.
The issue happens at both GUI and WebUI.
Any pointers to fix this issue?
Thanks and Regards,
Gauri.

Hi,
You can try clearing the buffer using 'CRM_ORDER_INITIALISE' followed by CRM_ORDER_MAINTAIN" or TEXT_SAVE and TEXT_COMMIT, followed by BAPI_TRANSACTION_COMMIT with wait.
Prerna

Pricing not possible for line Item

hi
I am facing the follwong error because of which I am nto able to go to change mode . can you guys please suggest what could be the solution?
Pricing not allowed for item 000020 (Split 0001)
Message no. /DBM/PRICING004
Pricing is not allowed for the specified item. (Split 0001)
regarsd

Hi,
The note 1040320 may be relevant for the issue that you are facing.
Symptom: The pricing relevant partner role gets changed to an partner with a
different currency. Now the currency of the header (/DBM/VBAK_COM-WAERK)
and/or splitheader (/DBM/SPLHDR-WAERK) gets updated but not the currency
on item level and on split item level (only for DBM600).
The creation of warranty difference splits is not possible, because
pricing changes are not allowed.
Just take a look.
Regards,
Sandeep

Business Area not populated for F110 but it works for FBZ2

Hi all Gurus,
I have marked my co code in OBY6 for Business Area Financial Statement. In GL a/c, I also marked the FSG to be "Required" field. For posting key field status, it set to "Optional"
During F110 auto payment run, the Business Area field was blank and without any update.
But if I perform the same for manual pymt posting via FBZ2, Business Area is mandatory field.
Please help to undertand the logic.
Regards
jloh

hi
use substitution for business area.

Business area not determined for line item?

Similar Messages

Maybe you are looking for