Business area not picking up for substitution...

Hi
I have created susbstitution for GL account..for substituting business area for GL account....(tax GL account
Tax line item is automatically created in document.....i want business area to be pickep up for the same.
We want substitution create for Business area updating ;- When Document has 4 line item at the time of TAX and TDS line item the Business area not update, MIRO Document also not update the Business area.
Please reply
thanks

Dear Vijay,
Please kindly read the SAP note number 199886     Business area in tax line
In the value-added tax line items, the field "Business area" is NEITHER
automatically filled NOR can you enter a value manually.
Postings to VAT accounts must be made WITHOUT business area. The reason
for this is that the field "Business area" does NOT exist in the tax
data. Therefore,the advance return for tax on sales/purchases can also
only generate postings WITHOUT business area and these postings must
correspond exactly to the original tax postings in your account
assignments. Otherwise, the tax accounts would have steadily increasing
business area balances.
Unfortunately I must inform you that the business area is not available
for substitution because it can cause inconsistences in AM,CO and MM
modules.
Substituting the B.A.field is a modification to the standard SAP
system. To make the business area field substitutable you must have
written an ABAP to update table GB01 for the GSBER field, this is
all explained in SAP note 42615.
I hope this helps.
Mauri

Similar Messages

  • Business area not determined for line item?

    Hello All,
    I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
    I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
    Is there anything else need to be done? Do we have to define or assign the business area in material master?
    I would appreciate  if somebody can answer.
    Thanks.

    There are three rules for determining a business area:
    o   Rule 1: plant and division 
    o   Rule 2: for each sales area          
    o   Rule 3: for each plant and item division
    See what you are missing

  • Smartview webf run time prompts upon submit are not picking up from the POV

    Hi ,
    I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

    I found a known issue for smart view in 11.1.2.1 read me doc
    11075506
    When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
    Good Luck

  • MIRO - Business Area not getting updated in Vendor Line item

    Hello friends,
    I am posting Vendor invoice in MIRO transaction.
    After Posting if i see the financial document generated,
    Business area has not got updated in Vendor Line item.
    What could be the problem ?
    Please help me out.
    Hari Prasath

    Hi Kale,
    Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
    On the other hand, have a look to the note and kba below:
    41294 - Business area in customer/vendor item
    Kba 1727802 - Business area not getting populated in sales/ purchase tax

  • How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

    Hi All,
    We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
    I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
    I am using disco version 10.1.2.48.18.
    Thanks.

    Hi,
    You need to work though Metalink Note 313418.1.
    Rod West

  • Business Area not coming in FS10N layout.

    Dear SAP Friends,
    I am working in a client where "Document Splitting" was activated on the basis of "Business Area" from the 1st August,2008. In this client their is four business areas. When I am getting the balance sheet as per Business Area in F.01 every GL shown the amount as per business area & also a some of amount is shown under the not assigned head. Amount under the not assigned is total of document of having no business area.
    Now my client wants that all not assigned amount should be distributed as per the business area & not assigned amount will come to zero.The field of business area is "GSBER".
    Now for that I am testing it on development. I have selected on document having no business area and updated the table "BSEG" for filed "GSBER" for that business area manually through ABAP. When I am seeing the same  document under FB03 the system shows the Business Area correctly which I have given in the table. But when I see the General Ledger balance in FS10N (In layout selected business area column) the same document does not give business area in that business area column. But when I select it for details it shown the business area in that document.
    Now my issue is why this is happening ? or is their any another way to do this ?
    Because i have to update all of documents of before 1st, August 2008 with no business area .
    Please give any solution ASAP & for helpful answer points will be surely awarded.
    Thanks & Regards in advance  
    Sandeep
    Edited by: Sandeep on Dec 6, 2008 11:34 AM

    Hi,
    Touching a cluster table like BSEG thru ABAP is a tricky thing.  You would need to work out all linkages to other tables for the data you are touching, would suggest a where used for field business area and update all other tables relevant to the data, like BSI* and BSA*.
    For FS10N, the data is not read from BSEG but rather from the totals tables like GLT0.
    Cheers

  • Business Area not showing during MIGO line item process

    Hi,
    We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
    If we create another MIGO document with other PO, BA is showing...
    What should be the issue...

    Hi,
    is this an account assigned PO ? Please check the PO document for the acct asst Tab .
    whather the BA is populated .?
    Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
    Regards,

  • Business area not capturing

    Dear Experts
    Business area not capturing for tax code while doing invoice verification.
    Can anyone helpme
    Regards
    Kumar

    Hi
    Use t-code F.5D and F.5E for business area adjustment, Or else consult you FI Consultant
    he Business area is never filled in automatic posting such as taxes or bank accounts. You have to customize the adjustment retroactively in the IMG. You will find it in "General  ledger Accounting -> Business Transactions -> Closing -> Regrouping ..." Once you have set all the accounts require, in functional you have to run all the Regroup transactions (General Ledger -> Periodic Processing -> Closing -> Regroup -> Balance Sheet Adjustment ...)
    This process ensures the zero balance per business area necessary for
    creating business area balance sheets.

  • Business area not relevant to plant

    Hi Gurues, I am getting error message when i going to create reservation error is coming 500060 Business area not relevant plant 3600. please help to solve it Best Rajeev

    Greetings Rajeev,
    Please always post the full message text including the message number with such questions.
    For starters, please check settings in:
    SPRO > Enterprise Structure > Assignment > Logistics - General > Assign Business Area to Plant/Valuation Area and Division
    See: Business Area and Plant

  • TLB order are not picking all PO  in APO

    Hi Expert,
    TLB order are not picking PO in  APO.Order has missing PO.
    for ex :
    Ord 1 ; 10 lines with 20 qty of PO
    Ord 2 : 5 lines with 20 qty of PO (here lines should be 10 instead of 5)
    I appreciate your immediate response
    Thanks
    Vijay Job

    Hi
    I   found the  mistake.   The  address   ( shift F5  )  in OX10   does  not  get   transported in transport request ,   thought the  plant  gets copied from  eg.  client 100  to client  200.
    So  I   manually entered  the address  for the target  client  eg 200  here,    and  then  the  dropdown list  now shows all   plants.
    Thanks
    kamala

  • Excise value are not pick

    hi experts
    hi i have a problem  while doing billing document against sales order and outbound delievery excise values are not pick by the system.but in the sales order it is showing . please help to resolve this issue ..

    Dear Farhan,
        Just take a help of an SD consultant it is a matter of 2 min for him to solve this issue.
    still Go to tcode VTFL
    and search for your delivery type and your billing type and double click on the same,
    2.Then you will have an item folder on the left side click on that and you will get the list of all item category.
    3. Double click your item category YP05 and on the right side lower end you will get the Price type - in that enter "D" instead of "G"
    and Save it. then transport it to your quality and do the sales order process again.
    REgards,
    Sudhir

  • Impact Analysis: Business Area, Profit Center changed for Sales Order type

    Hi All,
    Can you please let me know the impact of changing the Business Area and Profit Center for Sales Order Document types.
    Scenario:
    Let's say that sales document type ZOR has been used for sometime. On this document x number of sales orders have been raised, delivered and invoiced over the years.
    Now, if you change the Business Area and Profit Center what would be the business impact.
    thanks,

    Hi,
    First of all itu2019s not a good business practice to change the Business area and Profit Centre.
    However if at all l you change the Business area and Profit centre the following is the impact::
    Business Area: effects the sales order in accounts assignment at Header level.
    Profit centre: effects the accounting part at Item level
    Overall in MIS reporting w.r.t Profit and Business Analysis in Finance will be affected.
    Thanks and regards
    DSR

  • Proposals are not getting generated for BOM items in MD50

    Hi Gurus,
    I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
    For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
    MRP type is PD in both materials.
    When i run a MRP thru' MD50 after getting customer order.
    it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
    Please let me know the solution.
    Thanx in advance
    Regards,
    Nagraj Vasmate

    try to use strategy 20

  • My favicons are not showing up for all my imported bookmarks as well as certain current bookmarks and when I open the about:config it says "browser.chrome.favicons;false". Shouldn't this be true and how to I change it?

    I had to rebuild my computer and when I imported all of my bookmarks they had no favicons. I started getting some of the favicons when I would go to the websight it would reconnect, but now I can't seem to see almost any of them. I did a search on Google and one tech site suggested the about:config file and that the "browser.chrome.favicons;false" should be set to true. But when I toggle it to true and restart Firefox it is once more set to false. I know it doesn't seem like much, but it is really annoying not having those favicons.
    Help me Obi Wan Firefox you are my only hope.

    The browser.chrome.favicons preference should be set to true, as it is not retaining the value when you restart Firefox, see the [[Preferences are not saved]] article for possible causes.

  • Error message "No business area can be determined for item 000010"

    Hi all,
    I had maintained business area assignements.
    However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
    What does it mean ? And how can I fix this problem ?
    Regards,
    Bahia.
    Edited by: Bahia M. on Nov 13, 2008 11:58 AM

    Dear Bahia,
    Please go to IMG path assign the business area
    IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
    -->Assign Business Area To Plant And Division
    I hope this will help you,
    Regards,
    Murali.

Maybe you are looking for

  • Organizer won't open in Photoshop Elements 10. Says it is in use by another program.

    Organizer won't open in Photoshop Elements 10. Says it is in use by another program. This just started happening.... When I open Adobe Photoshop Elements 10 in Windows 7 and click on Organizer to open my catalog, I get a message that reads, " The cat

  • Sort file by date

    hi guys, i have a problem with sorting my files here. this is what my code look like. but i could sort it if any one knows please help me           for ( count = 0; count < dirList.length; count++ )           //return the character after the ('.')   

  • JCO Start Connection.

    Hello i'm getting my first steps with jco and i have a problem connecting. This is the part of the code I use to connect: Properties jcoPropeties = new Properties(); jcoPropeties.setProperty("jco.client.client", "400"); jcoPropeties.setProperty("jco.

  • My layer mask is yellow/cream instead of white.

    I can add a second one on the same layer and it will be white. Using CC and windows 8. 

  • JTree, strange problem

    I created a JTree on top of a DefaultMutatableTreeNode by using the constructor JTree(TreeNode root) I tried removing all leaf nodes of the model, using node.removeFromParent(). And unsurprisingly the UI is automatically updated. After that, i reinse